How to find bpel instance in 11g based on the index values using Java APIs

Hi ,
In SOA10G we had option to find the instances based on the index value using Java APIs like below.
WhereCondition criteria= new WhereCondition(SQLDefs.CX_index_1 + " = ?");
criteria.setString(1, "indexValue");
Locator mLoc = getLocator();
IInstanceHandle[] foundInstances = mLoc.listInstancesByIndex(criteria);
Please tell me how to achieve the same functionality in SOA 11G using Java APIs
Regards,
Saba

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

Similar Messages

How to find bpel instance in 11g based on the index values

We have 10g BPEL process where we define 4 index values for all the instances. Whenever support request comes, we ask index values and based on that we search the process instance.
We have migrated this 10g bpel process to 11g now. How to find bpel instance in 11g based on the index values ???

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

How to check whether a Document in KM is classified or not using JAVA API

Hello Everyone,
Can anyone tell me, How to check whether a Document in KM is classified or not, using JAVA API's??
Thanks & Regards,
Adren D'Souza

Hi,
The code is as follows:
IIndexService indexService = null;
try {
   indexService = (IIndexService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.INDEX_SERVICE);
} catch (ResourceException e) {
   if (indexService == null) {
     log.errorT("Error on instanciating the index service");
     return this.renderMessage(this.getBundleString(RES_NO_INDEX_SERVICE), StatusType.ERROR);
// get index
IIndex index = null;
try {
   index = indexService.getIndex("YourIndexID");
} catch (WcmException e1) {
   log.errorT("Error when trying to get the index");
   return this.renderMessage(this.getBundleString(RES_NO_INDEX), StatusType.ERROR);
// check if the index is a instance of AbstractClassificationIndex
AbstractClassificationIndex classiIndex = null;
if (index instanceof AbstractClassificationIndex) {
   classiIndex = (AbstractClassificationIndex) index;
} else {
   log.errorT("The index " + index.getIndexName() + " is no classification index");
   return this.renderMessage(this.getBundleString(RES_NO_CLASSIFICATION_INDEX), StatusType.WARNING);
//give your KM Resource here for which you want to know if it is classified or not
boolean classified = classiIndex.isDocClassifiedInAnyTax(resource);
Regards,
Praveen Gudapati

How to send records to the MDM workflow using Java APIs

Hi All,
Using Java APIs i want to send group/single records to the backend MDM workflows for further processing. Can this be acheived? Please provide me with some code samples if you have any
Regards
Suresh

Hi,
Just go through this URL
https://help.sap.com/javadocs/MDM/current/index.html
In this <b>com.sap.mdm.workflow.commands </b> will Provide u commands for managing workflows.
I hope this helps you.
Regards
Nisha
Message was edited by:
Nisha Lalwani

Indexing for BPEL instances in 11g

Can any one give some suggestion on how to do indexing for bpel instances in 11g.
I am trying like below
oracle.xml.parser.v2.XMLElement studentRollNo= (oracle.xml.parser.v2.XMLElement)getVariableData("inputVariable", "payload", "/ns1:StudentList/ns1:Student/ns1:StudentRollNo");
setIndex(3, studentRollNo.getFirstChild().getNodeValue());
But i am unable to get index search for student roll no except instance id.
Edited by: 957463 on Sep 6, 2012 9:02 AM

yes, on em console there is no option to search based on index value. We can only search composite instance.
check if this helps you: http://soasphere.blogspot.in/2011/04/how-to-serch-composites-for-index.html

How to find server model from 11g OEM mgmt$ views

How to find server model from 11g OEM mgmt$ views
server model like Dell 710, DL380 G7 etc..,

It is included in this query (run as user SYSMAN):
SELECT t.target_name AS host_name,
ecm_util.HOST_HOME_LIST (t.target_name, t.target_type) AS home_info,
hw.vendor_name AS Vendor,
hw.system_config AS System_Config,
hw.machine_architecture Architecture,
os.name AS os_name,
os.base_version os_base_version,
os.update_level os_update_level,
os.address_length_in_bits os_address_length_in_bits
FROM mgmt_targets t, mgmt_ecm_snapshot s, mgmt_hc_os_summary os, MGMT_HC_HARDWARE_MASTER hw
WHERE t.target_type = 'host'
AND t.target_name = s.target_name
AND s.snapshot_type = 'host_configuration'
AND s.target_type = 'host'
AND s.is_current = 'Y'
AND s.snapshot_guid = os.snapshot_guid
AND hw.snapshot_guid = s.snapshot_guid
ORDER by t.target_type
The asked info is available in the view MGMT_HC_HARDWARE_MASTER, column: SYSTEM_CONFIG
Eric

How to find which instance in the RAC cluster the application is connected

How to find which instance in the RAC cluster the application is connected to ?
Raees

well if you know the user through which your application is connected to instance, you can easily find out by querying gv$session view.
select inst_id,sid,serial#,program,username from gv$session where username is not null;
Thanks
Gaurav

How to find Object Instance.Key

Hi all, I have a problem. I have a workflow as: I am as being an administrator, request for a resource for a user. And then an approver approves it. But before he approves I want to see the object form prepopulated with target user's information. So that I wrote i java class and attah as process task adapter to update task of approval process of the resource. In code I will set the form values using setObjectFormData(long plObjectInstanceKey, java.util.Map phAttributeList) function of tcFormInstanceOperationsIntf. But ı don't know how to get plObjectInstancekey which is "Object Instance.Key". I tried to use getAssociatedUsers operation but it does not work since my resource is not provisioned to user yet. Any idea?

It's immediately available when you go to map the values on your adapter. It should be under Object Data and the available values from there.
-Kevin

How to find colums in CLOB variable and get this colums value to update col

Question
How to find colums in CLOB variable and get this colums value to update colum of oracle database table
How my work will go
Step-1 - I am creating XML FIle which is based on code that we discused before-
Its developing xml file with data in <...inputelement> as u can see in my xml but in <..output> Element of xml its just have all column for exampe <itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
In 1st stage i am just generating <..INPUT> with its colums and real value from database and <..output> elements will go zero value but with colums name.
Note. I create temp table will all COLUMN which u can see in both in <..ITEMINPUT> and <..ITEMOUTPUT>
Step2.. After Generaing my xml i want to convert my xml data into CLOB not in a file. so clob will go to the VENDOR
STEP3.
I will Recieved again xml data in CLOB from the vendo in <.OUTPUT> ELEMents
for example
I send this format
<itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
And i will receive it
<itemoutput>
<FLD NM = "ABC VALUE"> 2 </FLD>
<FLD NM = "XYZ TYPE:> SUV</FLD> --- for varchar2
</itemoutput>
So will take this output valu from xml clob and will update my staging table .
Which have the same colum name as its look in xml clob.
Step- 4. I will take this value from staging table and update my original oracle database table. which i send you before.
But u leave this step becaue you dont know the staging table colum maping with original table.
I think now you understand
Please feed back
monriz

here is my xml..
I want to extract <..output> elements which enclosed with " " and its values from this xml file. please any body have any idea. please tell me
Thanks
<?xml version="1.0" ?>
- <RATABASECALC COPYRIGHT="COPYRIGHT 2001>
- <RATEREQUEST USEREFID="YES">
- <ANCHOR>
<DATABASENAME />
<DATABASEPW />
<DATABASESOURCE />
<DATABASEPRVDR />
<USERNAME />
<SEVERITYDES />
<CALLDES />
<INITACCDES />
<INITACCV />
<ITEMSEQDES />
<ITEMMATCHDES />
<CENTURYDES />
<DATEDES />
<FORMULADES />
<STRINGDES />
<VALIDATIONDES />
<STEPSDES />
<RETINFONUM />
<ADDLRETINFONUM />
<ANCHORNOMATCH />
<NOMATCHMSG />
<TRANUUID />
<LOGOPTION />
<MSGOPTION />
<USERLOGFN />
<NOITEMERROR />
<LOGFORMAT />
<LOGFN />
<STEPSFN />
<NUMNOMATCH>0</NUMNOMATCH>
<NUMERRORS>0</NUMERRORS>
</ANCHOR>
- <POLICIES>
- <POLICY>
<BUSINESSDES>N</BUSINESSDES>
<LEGALENTITYOWNER>CGI TRAINING AND DEMONSTRATION</LEGALENTITYOWNER>
<LEGALENTITYNAME>CGI TRAINING AND DEMONSTRATION</LEGALENTITYNAME>
<COMPEFFDATE>02/01/2000</COMPEFFDATE>
<RETRIEVALDATE>02/01/2000</RETRIEVALDATE>
<POLINPUTS />
- <POLOUTPUTS>
<FLD NM="POLICY CALCS DONE IND">Y</FLD>
<FLD NM="TOTAL DISCOUNTED POLICY PREM">2167.52</FLD>
<FLD NM="TOTAL POLICY PREMIUM">3180.0</FLD>
</POLOUTPUTS>
- <LOBS>
- <LOB>
<LEGALENTITYPRODGROUP>PERSONAL AUTOMOBILE</LEGALENTITYPRODGROUP>
- <LOBINPUTS>
<FLD NM="MULTI-CAR FACTOR">0</FLD>
<FLD NM="MULTI-CAR IND">Y</FLD>
</LOBINPUTS>
<LOBOUTPUTS />
- <REGIONS>
- <REGION>
<LEGALENTITYREGION>MAINE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">2356.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">2167.52</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">188.48</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>3</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R1C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F1" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">145.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C2">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F2" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">209.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C3">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F3" />
<COVINPUTS />
<COVOUTPUTS />
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">100</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">15</FLD>
<FLD NM="TOWING INDICATOR">Y</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">11</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">B</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">A</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.84</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1166.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">438</FLD>
<FLD NM="TOTAL COMP PREMIUM">218</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">475</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">4</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">50</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">12</FLD>
<FLD NM="TOWING INDICATOR">N</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">12</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.88</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1190.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">468</FLD>
<FLD NM="TOTAL COMP PREMIUM">194</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">497</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">0</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C2" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
<ITEMINPUTS />
<ITEMOUTPUTS />
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C3" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F1">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F2">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F3">
<FORMULANAME>PREMIUM DISCOUNT</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
- <REGION>
<LEGALENTITYREGION>NEW HAMPSHIRE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">824.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">0</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">0</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>2</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R2C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F4" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">0.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">500</FLD>
<FLD NM="COMP DEDUCTIBLE">250</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">Y</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">11</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1996</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">Y</FLD>
<FLD NM="GOOD STUDENT IND">Y</FLD>
<FLD NM="CLASS CODE">36</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">0</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">1.11</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">824.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">332</FLD>
<FLD NM="TOTAL COMP PREMIUM">123</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">334</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">8</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R2C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F4">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
</REGIONS>
</LOB>
</LOBS>
- <RETINFOS>
<TOTALRI>0</TOTALRI>
</RETINFOS>
</POLICY>
</POLICIES>
</RATEREQUEST>
</RATABASECALC>
Above xml data - some <...OUTPUT> elements has some FLD elements. and i want to take those outputelemt's FLD Elements data and update my oracle tables.
Note: FLD = "Attribie" are the colums name of the tables
back to top

How to find a concurrent request's responsibility of the FND user

How to find a concurrent request's responsibility of the OA user who submitted?
For example, I have a concurrent request id: 123, I know user A submitted,
I want to know user A's Responsibility when submitting the request id: 123.
Thanks

Hi,
I'm not sure about this, but can you check whether FND_CONCURRENT_REQUESTS.RESPONSIBILITY_ID provides you with the RESPONSIBILITY_ID of the user from which the request is triggered ? If yes, joining this with FND_RESPONSIBILITY_VL.RESPONSIBILITY_NAME can give you the name of the executing responsibility.
Regards,
Rakesh.

How to Create a Table Component Dynamically based on the Need

Hello all,
I have a problem i need to create dynamically tables based on the no of records in the database. How can i create the table object using java code.
Please help.

Winston's blog will probably be helpful:
How to create a table component dynamically:
http://blogs.sun.com/roller/page/winston?entry=creating_dynamic_table
Adding components to a dynamically created table
http://blogs.sun.com/roller/page/winston?entry=dynamic_button_table
Lark
Creator Team

How to create a service entry sheet based from the PO

how to create a service entry sheet based from the PO
Gurus,
I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
Please help.thanks!

HI,
Process for Creating Service Entry Sheet
Transaction Code : ML81N
1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter. (*For the next time, no adoption is required, just continue)
6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
8)Save .
9)Service Entry Sheet is SAVED and account posting made.
Hope, it is useful for you,
Regards,
K.Rajendran

How to handle vendor discounts based on the qty / value procured.

Hello
       How to handle vendor discounts based on the qty / value procured.
a.       Scenario: you have entered into a contract with vendor that you will buy goods worth Rs 10000/- and if you buy goods worth more than 100000 the vendor says he will give a discount of Rs 5000/- @ the end of the year.
i)                    How to handle this sceneriou2019s with SAu2019s
ii)                   What does STD SAP offer.
Regards
Sapman man

Hi,
For the discucount condition type, you have to maintain scales.
Take Condition type - Discount Value ( RB00)
Discount Value ( RB00) - Means Fixed discount. For this condition type, you have to maintain Scale basis as Value scale 'B' in the condition type customization.
Transcation : M/06
Select your condition type RB00 and click on the details icon.
In the Scales block, you have to maintain and save.Calculation type = Fixed amount
Scale basis = Value scale 'B'
For this condition type, you have to maintain scales in the inforecord.
Transcation : ME12
Select this condition type, click on the Scales icon. There you have to maintain like
From : 10,0000            Rate: 5000.
It means, if the document value is reached 10,0000 then discount is 5000rs. If the value islessthen the 10,0000 then no discount.
Regards
KRK

How to find block free space and PCTUSED FOR THE TABLE

HI all,
Due to performance issues for my database , my management ask me to reset the PCTUSED and PCTFREE values , and my doubt is
1)How to find the current PCTUSED and PCTFREE values.
2)How to find block free space and PCTUSED FOR THE TABLE.
Please help me out regarding this.
Regards,
Vamsi.

1)version is 10.2.0.4
2)output of query
tablespace extent_management allocation_type segment_space_management
SYSTEM     LOCAL     SYSTEM     MANUAL
UNDOTBS1     LOCAL     SYSTEM     MANUAL
SYSAUX     LOCAL     SYSTEM     AUTO
TEMP     LOCAL     UNIFORM     MANUAL
USERS     LOCAL     SYSTEM     AUTO
UNDOTBS2     LOCAL     SYSTEM     MANUAL
INS     LOCAL     SYSTEM     AUTO
CONFTBS     LOCAL     SYSTEM     AUTO
REINS     LOCAL     SYSTEM     AUTO
ANALYST     LOCAL     SYSTEM     AUTO
BI     LOCAL     SYSTEM     AUTO
INTRFC     LOCAL     SYSTEM     AUTO
COGNOS     LOCAL     SYSTEM     AUTO
TS_INDX     LOCAL     SYSTEM     AUTO
TS_CHOLAWEB     LOCAL     SYSTEM     AUTO
TS_DASBOARD     LOCAL     SYSTEM     AUTO

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

How to find bpel instance in 11g based on the index values using Java APIs

Similar Messages

Maybe you are looking for