How to find ECC tables/ reports based on which a DB View is created?
Hi All,
We have customized data source created based on a View/ Table. How can i find the ECC tables/ reports based on which this View has been created and also the logic behind which the different fields extract data from ECC..
Please advice.
Thanks & Regards
Sneha
Hi Sneha,
The only logic, i guess, that could be used is either defining the join fields or some restriction put in the selection conditions tab of the view. for e.g. if the view should only return Doc type XYZ, the same could be implemented in selection conditions tab. for transaction to check the view, it was already posted above.
Similar Messages
-
How to find out sub site name from which sub site template is created - in solution gallery
hi,
i am having an issue in my "save site as a template". i have created a subsite few weeks back with doc libs and splists, disc.forum and based on the template subsite I have created new subsites. now
as per my new requirement i need to add new doclibs and few columns in these doc lib. But I am unable to find which sub site was taken as a template.since i have many subsites with different names, I forgott
to make meaningful names, i gave some datetime for the templatesubsites,
like project_27_jul_2pm,project_20_jul_7pm, etc etc.
So would like to know, is it possible to find out from which subsite I have taken/prepared the template subsite.
any APIs are available or any power shell scripts. such that i can find out from which subsite i have created this sub site template.check this
http://social.msdn.microsoft.com/Forums/en-US/3c492adb-e7cb-4f5c-8c29-386a21c3498e/how-to-find-out-a-list-of-sites-created-from-a-template?forum=sharepointgeneralprevious -
How to find ECC tables related to BEx reports
Hi Experts,
Say we have one particular BEx query.
When we click the information tab it shows the technical name and also the multiprovider name on which a particular query is built.
Now if we LISTCUBE on multiprovider. we can find the Infoprovider supplying the data (0INFOPROV)
Second comes the datasources which are bringing the data into DSO/Cube from ECC.
Q) I am not able to find a way out to find what the tables in ECC involved from which a particular report
is showing the data in BW (say while reconciliation).
Would you like to suggest the correct approach or the best way in this regard??
Q) Can Extract Structres of these Datasources give the table information??Hi Aparajit,
The easy way to backtrack the data is following the top down approach and there isnt any standard procedure to identify the source table unless you use all the standrd objects in BW and souce with zero customization
- Identify the report for which you need to track the source table
- Create a copy of it an enable the infoproviders in the rows/columns
- Identify the Info object & key figure for which need to need to know the source and remove the rest from your output. With this you know the underlying DSO/CUBE for ths source of the data
- Identrify the DSO/Cube is pulling data from ECC OR withing BW data providers
- Once you know the untimate data source of the respecive DSO/Cube then check if its a custom/standard
- There are many ways customizing the DS, if the DS is built on View you have the tables straight away, in case of FM check for whereused list to see if there are any underlying tables. (This will need to be done in your source system and not BW). Remember there might be customization in CMOD as well where the data is again extracted from other source tables
Thanks
Abhishek Shanbhogue -
Moderator nessage - welcome to SCN
But before posting, please take the time to read the rules of engagement - please do not ask vague, basic questions. And please make sure that you post to the correct forum.
Hello All,
Pleas any body can help me how to find out BW reports & what are the steps ?
Thanks & Regards
Tejaswi Gupta
Edited by: Rob Burbank on Apr 6, 2009 5:16 PMhi,
goto SE81 and click on the corresponding application like fi
You will get the standard packages for FI with the programs available
Please check out this link
http://www.sap-img.com/financial/useful-reports-tcode-in-sap-financial-accounting.htm
or
Check this Transaction: SAP1
U will have reports based on the area.
or
Look at the table TADIR --> see only the programs, even you can look at based on the Development class wise
If you find it useful mark the points
Regards,
GNK -
How to find available standard reports for SD module
hello folks,
can any one please guide me how to find the standard reports available for
the ssd modulehi cnu,
here r some steps to find the standard reports
goto SE81 and click on the corresponding application like sd
You will get the standard packages for SD with the programs available
Please check out this link
http://www.sap-img.com/financial/useful-reports-tcode-in-sap-financial-accounting.htm
or
Check this Transaction: SAP1
U will have reports based on the area.
or
Look at the table TADIR --> see only the programs, even you can look at based on the Development class wise
If you find it useful mark the points
~~Guduri -
How to find full tables hierarchy in schema
Hi,
How to find the table hierarchy list from oracle schema by using Reference Key constraint?
In my schema I am having many tables, approximate 4000 and from there I needs to get a single list which should be based in the Foriegn key based (Parent tables should be first then child tables)
Regards
AneeYou can start with this
select A.table_name children,
B.TAble_name Father
from DBA_CONSTRAINTS A,
DBA_CONSTRAINTS B
WHERE A.CONSTRAINT_TYPE = 'R'
And B.Constraint_name = a.r_Constraint_name -
How to find name of partner based on partner number
Hello All,
Can any one help me how to find name of partner based on partner number.
Regards,
LisaSELECT kunnr name1 erdat
FROM kna1
INTO TABLE i_kna1
WHERE erdat IN s_date.
SELECT kunnr kunn2 knref vkorg vtweg spart
FROM knvp
INTO TABLE i_knvp
FOR ALL ENTRIES IN i_kna1
WHERE kunnr = i_kna1-kunnr AND
vkorg IN s_vkorg AND
vtweg IN s_vtweg AND
spart IN s_spart AND
parvw = 'ZR'.
LOOP AT i_kna1.
READ TABLE i_knvp WITH KEY kunnr = i_kna1-kunnr.
IF sy-subrc = 0.
MOVE-CORRESPONDING i_kna1 TO i_cust2.
MOVE-CORRESPONDING i_knvp TO i_cust2.
APPENd i_cust2.
endif.
ENDLOOP.
*SELECT kunnr name1
FROM kna1
INTO TABLE i_kna1.
loop at i_cust2.
read table i_kna1 with key kunnr = i_cust2-kunn2.
IF sy-subrc = 0.
i_cust2-name2 = i_kna1-name1.
modify i_cust2.
endif.
endloop.*
icust2 will have partner number ,....partner name is in KNA1,..
so look in tat ..by above code.._ if this is wat u r luking for -
HOW TO FIND OUT TABLE DESCRIPTION FROM JDBC?
HOW WILL FIND OUT TABLE DESCRIPTION FROM JDBC?
Have a look at ResultSetMetaData
getColumnCount()
getColumnName(int)
getColumnTypeName(int)
getColumnDisplaySize(int)
***Annie*** -
How to find out table name for the field in the webUI
Hi.
I am in CRM2007.
So i go to the transaction code BSP_WD_CMPWB
In that i provide the component name as CRM_UI_FRAME.
I press the Test button.
So, it opend the WebUI.
I want how to find out table of the particular input field?
I mean from which table the data is retrived how to find out?
When i enter some thing in the input field how to find out in which table that data is stored?
By pressing F2 on the input field it opend View and Component Name.
I want find out table of that particular field. How to find it?
If anybody know about this explain it with Screen shorts if possible.
Thank You.
Krishna. B.hi
goto tx genil_model_browser. Suppose you want to find fields reated to your order header eg sold to name. In component set write all and press F8. Then goto access object and in access object click on node BTAdminH. Click on attribute structure. Here you will find structure and attributes. If you click relationship then you will see all the relationship wrt btadminh. open any r/s that you require. and click on other object and attribute. You will get to know the structure.
Best regards
Pankaj kumar -
Hi All,
How to find the tables in Oracle order mangement and what are the links of the tables in oracle OM
Thanks & Regards
srikkanth.MHow to find the tables in Oracle order mangement and what are the links of the tables in oracle OMeTRM
http://etrm.oracle.com
Thanks,
Hussein -
How to find the tables corresponding to a particular field in datasource.
Hi Experts,
There are lot of extra fields in the structure like MCEKKN as compared with the table EKKN. The data in these fields are coming from some other table.
So can u tell me how to find these tables corresponding to these fields?
Let me be more clear..
I want to know that the data in the datasource like 2LIS_02_ACC are coming from lot of tables.
How can I find those tables corresponding to each field in the extraction structure.
I have tried with ST05...as well as by filling setup tables in debbugging mode..but I am still in lot of confusion.
Please try to help me....U will get good points in response.
Thanx.
Vinod.Hi Vinod,
Why are you trying to enhance the extractor because the steps you are following is tio enhance the structure
<i><b>like transferd one of the field from pool to selection criteria</b></i>
If you want to see only the fields of the extractor and from which table it is coming you just have to see the pool only.
There in the lef you have the fields which are already present in the extractor and in the right you have the avaialbale fields present.
Also in the two selection pools if you will see carefully you will find in each selection pool
"Table name" and then the "field name" and then description of the field data type and length.
Like in case of 2lIS_13_VDITM you will find all the fields coming from VBRK and VBRP and VBUK.
Just check it you will get an idea.
In this way you can find that which field in the extractor is coming from which of fields of the table.
I think this is what you want to know.
If not clear then do reply
Thanks -
Urgentpls : How to find the Oracle reports and forms version in Unix prompt
Hi,
How to find the Oracle reports and forms version in Unix prompt.
Please give the steps
ThanksI need to check the version of Oracle forms and reportsExample :$ frmcmp.sh -h | head -1
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
$ rwrun.sh 2>/dev/null | head -2 | tail -1
Report Builder: Release 10.1.2.0.2 - Production on Wed Mar 10 11:17:55 2010
$ -
How to find Obsolete Tables?
Hi!
Can Anybody tell me how to find Obsolete tables in a ABAP System (like in 4.7B,6.0 etc)?
Or if u have list of obsolete tables in any version,please send me.
-ArunaYou may have an overview wirth Solution Browser tool (at the solution point of view) in order to compare functionality between your current system and the ERP 2005.
at:
http://solutionbrowser.erp.sap.fmpmedia.com/
You can get the detailed release information from the following link.
http://service.sap.com/releasenotes.
A release note is a brief explanation of new features or changes to the system since the last software release. A release note typically describes a new function or an existing function that has been enhanced or changed.
I hope this helps.
Reward Points If helpful
Regards
Vasanth -
How to find an table for storing the employee salary
hi,
how to find an table for storing employee salary .. In which table those details are stored .. Please reply me.
regards,
kumarHi,
You can see the basic salary details from table -pa0008.If you can see the payroll data,then its not stored in transparent table.its in cluster.For viewing that,you can see through transaction code - pc_payresult.
Regards,
Manoj. -
How to find the tables of datasource
Hi
can anyone tell me how to find the tables from where the datasource is extracting data?
I have a datasource 0CO_PC_ACT_02 which i thought was extracting data from MBEW, but my MBEW table has only around 1000 records but while scheduling the data load of infopackage my PSA shows more than 4000 records.
How does this happen?
Thanx in advance
SujaiHi,
yes it is mainly MBEW as well as MBEWH (history of MBEW); in adition you have some article ledger data (table ckmlhd) from which some records could be added; MARV as well...
You can check in function module KKBW_XBEW_BW_GET_DATA_IS1 all the details.
hope this helps...
Olivier.
Maybe you are looking for
-
How do i get my iphone 3g unlocked from payg 02 to vodafone payg
hi got a 02 iphone 3g and need it unlocked from 02 payg to vodafone payg can any1 help
-
I have created a folder on my mac mini server and enabled file sharing so the folder, the problem i am having is when it connect to the folder through numbers on an iPad the folder is empty even though i have put a .numbers file there! i am able to s
-
I've set up Sync on my work PC and my home MacBook. I can see open tabs from my PC while I'm on my Mac, but I can't see open tabs from my Mac while I'm on my PC. Why?
-
Status Date Shows NA But Really Should Have a Designated Date
Hello all, I receive project files on occasion from which I know have an active Status Date (SD). When I open the file, the SD will show NA, indicating a SD hadn't been designated. I've come across this issue typically, it seems, when I open a file
-
Requested deleted in Transport Organizer
Hi, How can we find out request deleted in Transport Organizer (SE10). Is there any table or log which possess the request and the person who deleted the request. Thanks.