How to find Enqueu/Dequue rate in a QUEUE?

Hi,
You can find some useful statistic information about the number of messages in different states you van query v$aq view. I don't what specifically you mean with "Enqueue/Dequeue rate"
SELECT A.OWNER,
        A.NAME,
        A.QUEUE_TYPE,
        A.QUEUE_TABLE,
        A.RETENTION,
        A.ENQUEUE_ENABLED,
        A.DEQUEUE_ENABLED,
        B.WAITING,
        B.READY,
        B.EXPIRED,
        B.TOTAL_WAIT,
        B.AVERAGE_WAIT
FROM DBA_QUEUES A,
      V$AQ B
WHERE A.QID = B.QID
AND   A.OWNER = 'USER'Regards,

Similar Messages

Finding enqueue dequeue rate

Hi,
How to find enqueue and dequeue rate in Oracle Advanced Queue?
Please post if there is any SQL query to find enqueue per second, dequeue per second.
Regards,
Guru

Hello,
Can you please show me how to run AWR report so that it generates AQ stats you talked about ?The AWR report will be started using the sql script "awrrpt.sql" ($ORACLE_HOME/rdbms/admin/awrrpt.sql).
You will find all details in the original Oracle documentation, keyword AWR.
In the generated report you will find two sections concerning AQ (including a list of all your defined AQs):
==> Persistent Queues
Ordered by Queue Name
indicates queue (re)started between Begin/End snaps
%Exp Msgs - % of msgs enqueued with expiry
%Delay Msgs - % of msgs enqueued with delay
%Trasf Time - % of Enqueue time spent in transformation
%Eval Time - % of Enqueue time spent in rule evaluation
==> Persistent Queues Rate
Ordered by Queue Name
indicates queue (re)started between Begin/End snaps
Greetings
WoG

Does anyone know how to find maximum sample rate on an mac 10.7.5

Trying to see if I can downlaod a audio plug-in that requires a maximum sample rate of 199kHz. Where do I find this info for 2009 Mac 10.7.5?

According to http://support.apple.com/kb/ht3913:
"The internal microphone supports recording at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz."

How to find out the listeners on a Queue

Hi,
We are using publish/subscribe method to send messages. Given a queue name, is there any way to find out the number of sessions listening on this Queue. that is if there are two servers subscribed to listen messages from a Queue, is there a way to display those two.
here is the code for creating a session.
qconn = AQjmsTopicConnectionFactory.createTopicConnection(dbconn);
session = (AQjmsSession)qconn.createTopicSession(true, Session.AUTO_ACKNOWLEDGE);
topic = session.getTopic(schema, responseQueueName);
replyTo = new AQjmsAgent("scclient", schema + "." + responseQueueName);
destination = new AQjmsAgent[]{new AQjmsAgent("scserver", schema + "." + requestQueueName)};
publisher = (AQjmsTopicPublisher)session.createPublisher(session.getTopic(schema, requestQueueName));
this.dbconn = dbconn;
qconn.start();
Thanks alot

I never have tried the method you listed so can't speak to that. I have found this that may be relevant.
Metalink Note 105067.1 - Event Monitor Process: Architecture and Known Issues
From that document
"In terms of monitoring notification clients when an AQ client has registered for notification this information is stored in a table called sys.reg$. The information which is of most interest is as follows:
subscription_name : Name of the subscriber registered
location_name : Name of the AQ Callback function
user# : user_id for the user that has registered the subscriber to the callback function.
Check dba_users for more information.
namespace : 1 for DBMS_AQ.NAMESPACE_AQ."
Hopefully that provides an alternative for you.
Jason

UDF: how to find out the context in in-queue has been changed? (java)

Hi,
does anybody know?
Is there som function for this? Because I have a inbound queue with 2 separate contexts, let's say:
A
B
C->changes context
X
Y
Z-?changes context
Let's say I need to return first values in each context. how to do that in UDF?
Thank you,
Olian
Edited by: Olian Saludew on Aug 12, 2008 7:11 PM

Hi,
Create the Advanced UDF as below
While creating the UDF select the Cache parameter as Context
Then just use below code.
here a---> Source field
result.addValue(a[0]);
This will always take only 1st value of queue.
Thanks
swarup

How to find the jobs in reports server queue

Hi All,
I am using oracle forms & reports 10g and Oracle application server is 10g.
Here we have 100 reports servers, so using this URL we can able to find a particular report server.
http://dhabiapp1.dof.ae:8080/reports/rwservlet/showjobs?server=auh_1
Is there any possibilities to find all the reports server in a single page.
Thanks & Regards
Srikkanth.M

Hi ccortez,
Thanks for you reply.
I have executed the command and its listing all the report servers, but my requirement is to list all the reports server with queue. Is there any possibilities from the front end screen to see all the report server in a single screen.
Thanks & Regards
Srikkanth.M

How to find the database growth rate?

Wanted to do the forecasting of disk growth for one year. How to find the database growth rate?
Rahul

This is code authored by Richard Ding that will log database sizes to a table. If you run it every day, then you can go back and compare the database size differences day to day... week to week... month to month... and year over year. That is
how I forecast growth over time.
Note: There is a database name required that is local to your environment, so change [YOURDATABASENAME] to whatever local database you wish to use. I will also post the DDL to create the target table. Create that table in the database you
name in the stored procedure code and all should run fine.
USE [master]
GO
/****** Object: StoredProcedure [dbo].[sp_SDS] Script Date: 04/22/2015 09:32:53 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[sp_SDS]
@TargetDatabase sysname = NULL, -- NULL: all dbs
@Level varchar(10) = 'Database', -- or "File"
@UpdateUsage bit = 0, -- default no update
@Unit char(2) = 'MB' -- Megabytes, Kilobytes or Gigabytes
AS
** author: Richard Ding
** date: 4/8/2008
** usage: list db size AND path w/o SUMmary
** test code: sp_SDS -- default behavior
** sp_SDS 'maAster'
** sp_SDS NULL, NULL, 0
** sp_SDS NULL, 'file', 1, 'GB'
** sp_SDS 'Test_snapshot', 'Database', 1
** sp_SDS 'Test', 'File', 0, 'kb'
** sp_SDS 'pfaids', 'Database', 0, 'gb'
** sp_SDS 'tempdb', NULL, 1, 'kb'
SET NOCOUNT ON;
IF @TargetDatabase IS NOT NULL AND DB_ID(@TargetDatabase) IS NULL
BEGIN
RAISERROR(15010, -1, -1, @TargetDatabase);
RETURN (-1)
END
IF OBJECT_ID('tempdb.dbo.##Tbl_CombinedInfo', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_CombinedInfo;
IF OBJECT_ID('tempdb.dbo.##Tbl_DbFileStats', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_DbFileStats;
IF OBJECT_ID('tempdb.dbo.##Tbl_ValidDbs', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_ValidDbs;
IF OBJECT_ID('tempdb.dbo.##Tbl_Logs', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_Logs;
CREATE TABLE dbo.##Tbl_CombinedInfo (
DatabaseName sysname NULL,
[type] VARCHAR(10) NULL,
LogicalName sysname NULL,
T dec(10, 2) NULL,
U dec(10, 2) NULL,
[U(%)] dec(5, 2) NULL,
F dec(10, 2) NULL,
[F(%)] dec(5, 2) NULL,
PhysicalName sysname NULL );
CREATE TABLE dbo.##Tbl_DbFileStats (
Id int identity,
DatabaseName sysname NULL,
FileId int NULL,
FileGroup int NULL,
TotalExtents bigint NULL,
UsedExtents bigint NULL,
Name sysname NULL,
FileName varchar(255) NULL );
CREATE TABLE dbo.##Tbl_ValidDbs (
Id int identity,
Dbname sysname NULL );
CREATE TABLE dbo.##Tbl_Logs (
DatabaseName sysname NULL,
LogSize dec (10, 2) NULL,
LogSpaceUsedPercent dec (5, 2) NULL,
Status int NULL );
DECLARE @Ver varchar(10),
@DatabaseName sysname,
@Ident_last int,
@String varchar(2000),
@BaseString varchar(2000);
SELECT @DatabaseName = '',
@Ident_last = 0,
@String = '',
@Ver = CASE WHEN @@VERSION LIKE '%9.0%' THEN 'SQL 2005'
WHEN @@VERSION LIKE '%8.0%' THEN 'SQL 2000'
WHEN @@VERSION LIKE '%10.0%' THEN 'SQL 2008'
WHEN @@VERSION LIKE '%11.0%' THEN 'SQL 2012'
WHEN @@VERSION LIKE '%12.0%' THEN 'SQL 2014'
END;
SELECT @BaseString =
' SELECT DB_NAME(), ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'CASE WHEN status & 0x40 = 0x40 THEN ''Log'' ELSE ''Data'' END'
ELSE ' CASE type WHEN 0 THEN ''Data'' WHEN 1 THEN ''Log'' WHEN 4 THEN ''Full-text'' ELSE ''reserved'' END' END +
', name, ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'filename' ELSE 'physical_name' END +
', size*8.0/1024.0 FROM ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'sysfiles' ELSE 'sys.database_files' END +
' WHERE '
+ CASE WHEN @Ver = 'SQL 2000' THEN ' HAS_DBACCESS(DB_NAME()) = 1' ELSE 'state_desc = ''ONLINE''' END + '';
SELECT @String = 'INSERT INTO dbo.##Tbl_ValidDbs SELECT name FROM ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'master.dbo.sysdatabases'
WHEN @Ver IN ('SQL 2005', 'SQL 2008', 'SQL 2012', 'SQL 2014') THEN 'master.sys.databases'
END + ' WHERE HAS_DBACCESS(name) = 1 ORDER BY name ASC';
EXEC (@String);
INSERT INTO dbo.##Tbl_Logs EXEC ('DBCC SQLPERF (LOGSPACE) WITH NO_INFOMSGS');
-- For data part
IF @TargetDatabase IS NOT NULL
BEGIN
SELECT @DatabaseName = @TargetDatabase;
IF @UpdateUsage <> 0 AND DATABASEPROPERTYEX (@DatabaseName,'Status') = 'ONLINE'
AND DATABASEPROPERTYEX (@DatabaseName, 'Updateability') <> 'READ_ONLY'
BEGIN
SELECT @String = 'USE [' + @DatabaseName + '] DBCC UPDATEUSAGE (0)';
PRINT '*** ' + @String + ' *** ';
EXEC (@String);
PRINT '';
END
SELECT @String = 'INSERT INTO dbo.##Tbl_CombinedInfo (DatabaseName, type, LogicalName, PhysicalName, T) ' + @BaseString;
INSERT INTO dbo.##Tbl_DbFileStats (FileId, FileGroup, TotalExtents, UsedExtents, Name, FileName)
EXEC ('USE [' + @DatabaseName + '] DBCC SHOWFILESTATS WITH NO_INFOMSGS');
EXEC ('USE [' + @DatabaseName + '] ' + @String);
UPDATE dbo.##Tbl_DbFileStats SET DatabaseName = @DatabaseName;
END
ELSE
BEGIN
WHILE 1 = 1
BEGIN
SELECT TOP 1 @DatabaseName = Dbname FROM dbo.##Tbl_ValidDbs WHERE Dbname > @DatabaseName ORDER BY Dbname ASC;
IF @@ROWCOUNT = 0
BREAK;
IF @UpdateUsage <> 0 AND DATABASEPROPERTYEX (@DatabaseName, 'Status') = 'ONLINE'
AND DATABASEPROPERTYEX (@DatabaseName, 'Updateability') <> 'READ_ONLY'
BEGIN
SELECT @String = 'DBCC UPDATEUSAGE (''' + @DatabaseName + ''') ';
PRINT '*** ' + @String + '*** ';
EXEC (@String);
PRINT '';
END
SELECT @Ident_last = ISNULL(MAX(Id), 0) FROM dbo.##Tbl_DbFileStats;
SELECT @String = 'INSERT INTO dbo.##Tbl_CombinedInfo (DatabaseName, type, LogicalName, PhysicalName, T) ' + @BaseString;
EXEC ('USE [' + @DatabaseName + '] ' + @String);
INSERT INTO dbo.##Tbl_DbFileStats (FileId, FileGroup, TotalExtents, UsedExtents, Name, FileName)
EXEC ('USE [' + @DatabaseName + '] DBCC SHOWFILESTATS WITH NO_INFOMSGS');
UPDATE dbo.##Tbl_DbFileStats SET DatabaseName = @DatabaseName WHERE Id BETWEEN @Ident_last + 1 AND @@IDENTITY;
END
END
-- set used size for data files, do not change total obtained from sys.database_files as it has for log files
UPDATE dbo.##Tbl_CombinedInfo
SET U = s.UsedExtents*8*8/1024.0
FROM dbo.##Tbl_CombinedInfo t JOIN dbo.##Tbl_DbFileStats s
ON t.LogicalName = s.Name AND s.DatabaseName = t.DatabaseName;
-- set used size and % values for log files:
UPDATE dbo.##Tbl_CombinedInfo
SET [U(%)] = LogSpaceUsedPercent,
U = T * LogSpaceUsedPercent/100.0
FROM dbo.##Tbl_CombinedInfo t JOIN dbo.##Tbl_Logs l
ON l.DatabaseName = t.DatabaseName
WHERE t.type = 'Log';
UPDATE dbo.##Tbl_CombinedInfo SET F = T - U, [U(%)] = U*100.0/T;
UPDATE dbo.##Tbl_CombinedInfo SET [F(%)] = F*100.0/T;
IF UPPER(ISNULL(@Level, 'DATABASE')) = 'FILE'
BEGIN
IF @Unit = 'KB'
UPDATE dbo.##Tbl_CombinedInfo
SET T = T * 1024, U = U * 1024, F = F * 1024;
IF @Unit = 'GB'
UPDATE dbo.##Tbl_CombinedInfo
SET T = T / 1024, U = U / 1024, F = F / 1024;
SELECT DatabaseName AS 'Database',
type AS 'Type',
LogicalName,
T AS 'Total',
U AS 'Used',
[U(%)] AS 'Used (%)',
F AS 'Free',
[F(%)] AS 'Free (%)',
PhysicalName
FROM dbo.##Tbl_CombinedInfo
WHERE DatabaseName LIKE ISNULL(@TargetDatabase, '%')
ORDER BY DatabaseName ASC, type ASC;
SELECT CASE WHEN @Unit = 'GB' THEN 'GB' WHEN @Unit = 'KB' THEN 'KB' ELSE 'MB' END AS 'SUM',
SUM (T) AS 'TOTAL', SUM (U) AS 'USED', SUM (F) AS 'FREE' FROM dbo.##Tbl_CombinedInfo;
END
IF UPPER(ISNULL(@Level, 'DATABASE')) = 'DATABASE'
BEGIN
DECLARE @Tbl_Final TABLE (
DatabaseName sysname NULL,
TOTAL dec (10, 2),
[=] char(1),
used dec (10, 2),
[used (%)] dec (5, 2),
[+] char(1),
free dec (10, 2),
[free (%)] dec (5, 2),
[==] char(2),
Data dec (10, 2),
Data_Used dec (10, 2),
[Data_Used (%)] dec (5, 2),
Data_Free dec (10, 2),
[Data_Free (%)] dec (5, 2),
[++] char(2),
Log dec (10, 2),
Log_Used dec (10, 2),
[Log_Used (%)] dec (5, 2),
Log_Free dec (10, 2),
[Log_Free (%)] dec (5, 2) );
INSERT INTO @Tbl_Final
SELECT x.DatabaseName,
x.Data + y.Log AS 'TOTAL',
'=' AS '=',
x.Data_Used + y.Log_Used AS 'U',
(x.Data_Used + y.Log_Used)*100.0 / (x.Data + y.Log) AS 'U(%)',
'+' AS '+',
x.Data_Free + y.Log_Free AS 'F',
(x.Data_Free + y.Log_Free)*100.0 / (x.Data + y.Log) AS 'F(%)',
'==' AS '==',
x.Data,
x.Data_Used,
x.Data_Used*100/x.Data AS 'D_U(%)',
x.Data_Free,
x.Data_Free*100/x.Data AS 'D_F(%)',
'++' AS '++',
y.Log,
y.Log_Used,
y.Log_Used*100/y.Log AS 'L_U(%)',
y.Log_Free,
y.Log_Free*100/y.Log AS 'L_F(%)'
FROM
( SELECT d.DatabaseName,
SUM(d.T) AS 'Data',
SUM(d.U) AS 'Data_Used',
SUM(d.F) AS 'Data_Free'
FROM dbo.##Tbl_CombinedInfo d WHERE d.type = 'Data' GROUP BY d.DatabaseName ) AS x
JOIN
( SELECT l.DatabaseName,
SUM(l.T) AS 'Log',
SUM(l.U) AS 'Log_Used',
SUM(l.F) AS 'Log_Free'
FROM dbo.##Tbl_CombinedInfo l WHERE l.type = 'Log' GROUP BY l.DatabaseName ) AS y
ON x.DatabaseName = y.DatabaseName;
IF @Unit = 'KB'
UPDATE @Tbl_Final SET TOTAL = TOTAL * 1024,
used = used * 1024,
free = free * 1024,
Data = Data * 1024,
Data_Used = Data_Used * 1024,
Data_Free = Data_Free * 1024,
Log = Log * 1024,
Log_Used = Log_Used * 1024,
Log_Free = Log_Free * 1024;
IF @Unit = 'GB'
UPDATE @Tbl_Final SET TOTAL = TOTAL / 1024,
used = used / 1024,
free = free / 1024,
Data = Data / 1024,
Data_Used = Data_Used / 1024,
Data_Free = Data_Free / 1024,
Log = Log / 1024,
Log_Used = Log_Used / 1024,
Log_Free = Log_Free / 1024;
DECLARE @GrantTotal dec(11, 2);
SELECT @GrantTotal = SUM(TOTAL) FROM @Tbl_Final;
INSERT INTO [YOURDATABASENAME].[dbo].[DBSize]
([Weight]
,[DBName]
,[Used]
,[Free]
,[Total]
,[Data]
,[Data_Used]
,[Log]
,[Log_Used]
,[DT])
SELECT
CONVERT(dec(10, 2), TOTAL*100.0/@GrantTotal) AS 'WEIGHT (%)',
DatabaseName AS 'DATABASE',
CONVERT(VARCHAR(12), used) AS 'USED',
CONVERT(VARCHAR(12), free) AS 'FREE',
TOTAL,
CONVERT(VARCHAR(12), Data) AS 'DATA',
CONVERT(VARCHAR(12), Data_Used) AS 'DATA_USED',
CONVERT(VARCHAR(12), Log) AS 'LOG',
CONVERT(VARCHAR(12), Log_Used) AS 'LOG_USED',
GETDATE()
FROM @Tbl_Final
WHERE DatabaseName LIKE ISNULL(@TargetDatabase, '%')
ORDER BY DatabaseName ASC;
IF @TargetDatabase IS NULL
SELECT CASE WHEN @Unit = 'GB' THEN 'GB' WHEN @Unit = 'KB' THEN 'KB' ELSE 'MB' END AS 'SUM',
SUM (used) AS 'USED',
SUM (free) AS 'FREE',
SUM (TOTAL) AS 'TOTAL',
SUM (Data) AS 'DATA',
SUM (Log) AS 'LOG'
FROM @Tbl_Final;
END
RETURN (0)
GO
USE [YOURDATABASENAME]
GO
/****** Object: Table [dbo].[DBSize] Script Date: 04/22/2015 09:49:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[DBSize](
[UID] [int] IDENTITY(1,1) NOT NULL,
[Weight] [decimal](18, 2) NULL,
[DBName] [varchar](250) NULL,
[Used] [decimal](18, 2) NULL,
[Free] [decimal](18, 2) NULL,
[Total] [decimal](18, 2) NULL,
[Data] [decimal](18, 2) NULL,
[Data_Used] [decimal](18, 2) NULL,
[Log] [decimal](18, 2) NULL,
[Log_Used] [decimal](18, 2) NULL,
[DT] [datetime] NULL,
CONSTRAINT [PK_DBSize] PRIMARY KEY CLUSTERED
[UID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO

How to find & change stoke preference

How to find and change stoke preference = null by default for active document, when doing manual no documents open.
Thanks
Simon

Tom Wolsky wrote:
You can't change the timebase of a project once there is video in it. Make a new custom project at the right frame rate and copy from the old project and paste into the new one.
Ok noted with thanks, Tom

How to find colums in CLOB variable and get this colums value to update col

Question
How to find colums in CLOB variable and get this colums value to update colum of oracle database table
How my work will go
Step-1 - I am creating XML FIle which is based on code that we discused before-
Its developing xml file with data in <...inputelement> as u can see in my xml but in <..output> Element of xml its just have all column for exampe <itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
In 1st stage i am just generating <..INPUT> with its colums and real value from database and <..output> elements will go zero value but with colums name.
Note. I create temp table will all COLUMN which u can see in both in <..ITEMINPUT> and <..ITEMOUTPUT>
Step2.. After Generaing my xml i want to convert my xml data into CLOB not in a file. so clob will go to the VENDOR
STEP3.
I will Recieved again xml data in CLOB from the vendo in <.OUTPUT> ELEMents
for example
I send this format
<itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
And i will receive it
<itemoutput>
<FLD NM = "ABC VALUE"> 2 </FLD>
<FLD NM = "XYZ TYPE:> SUV</FLD> --- for varchar2
</itemoutput>
So will take this output valu from xml clob and will update my staging table .
Which have the same colum name as its look in xml clob.
Step- 4. I will take this value from staging table and update my original oracle database table. which i send you before.
But u leave this step becaue you dont know the staging table colum maping with original table.
I think now you understand
Please feed back
monriz

here is my xml..
I want to extract <..output> elements which enclosed with " " and its values from this xml file. please any body have any idea. please tell me
Thanks
<?xml version="1.0" ?>
- <RATABASECALC COPYRIGHT="COPYRIGHT 2001>
- <RATEREQUEST USEREFID="YES">
- <ANCHOR>
<DATABASENAME />
<DATABASEPW />
<DATABASESOURCE />
<DATABASEPRVDR />
<USERNAME />
<SEVERITYDES />
<CALLDES />
<INITACCDES />
<INITACCV />
<ITEMSEQDES />
<ITEMMATCHDES />
<CENTURYDES />
<DATEDES />
<FORMULADES />
<STRINGDES />
<VALIDATIONDES />
<STEPSDES />
<RETINFONUM />
<ADDLRETINFONUM />
<ANCHORNOMATCH />
<NOMATCHMSG />
<TRANUUID />
<LOGOPTION />
<MSGOPTION />
<USERLOGFN />
<NOITEMERROR />
<LOGFORMAT />
<LOGFN />
<STEPSFN />
<NUMNOMATCH>0</NUMNOMATCH>
<NUMERRORS>0</NUMERRORS>
</ANCHOR>
- <POLICIES>
- <POLICY>
<BUSINESSDES>N</BUSINESSDES>
<LEGALENTITYOWNER>CGI TRAINING AND DEMONSTRATION</LEGALENTITYOWNER>
<LEGALENTITYNAME>CGI TRAINING AND DEMONSTRATION</LEGALENTITYNAME>
<COMPEFFDATE>02/01/2000</COMPEFFDATE>
<RETRIEVALDATE>02/01/2000</RETRIEVALDATE>
<POLINPUTS />
- <POLOUTPUTS>
<FLD NM="POLICY CALCS DONE IND">Y</FLD>
<FLD NM="TOTAL DISCOUNTED POLICY PREM">2167.52</FLD>
<FLD NM="TOTAL POLICY PREMIUM">3180.0</FLD>
</POLOUTPUTS>
- <LOBS>
- <LOB>
<LEGALENTITYPRODGROUP>PERSONAL AUTOMOBILE</LEGALENTITYPRODGROUP>
- <LOBINPUTS>
<FLD NM="MULTI-CAR FACTOR">0</FLD>
<FLD NM="MULTI-CAR IND">Y</FLD>
</LOBINPUTS>
<LOBOUTPUTS />
- <REGIONS>
- <REGION>
<LEGALENTITYREGION>MAINE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">2356.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">2167.52</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">188.48</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>3</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R1C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F1" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">145.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C2">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F2" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">209.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C3">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F3" />
<COVINPUTS />
<COVOUTPUTS />
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">100</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">15</FLD>
<FLD NM="TOWING INDICATOR">Y</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">11</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">B</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">A</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.84</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1166.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">438</FLD>
<FLD NM="TOTAL COMP PREMIUM">218</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">475</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">4</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">50</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">12</FLD>
<FLD NM="TOWING INDICATOR">N</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">12</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.88</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1190.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">468</FLD>
<FLD NM="TOTAL COMP PREMIUM">194</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">497</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">0</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C2" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
<ITEMINPUTS />
<ITEMOUTPUTS />
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C3" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F1">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F2">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F3">
<FORMULANAME>PREMIUM DISCOUNT</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
- <REGION>
<LEGALENTITYREGION>NEW HAMPSHIRE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">824.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">0</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">0</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>2</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R2C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F4" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">0.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">500</FLD>
<FLD NM="COMP DEDUCTIBLE">250</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">Y</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">11</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1996</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">Y</FLD>
<FLD NM="GOOD STUDENT IND">Y</FLD>
<FLD NM="CLASS CODE">36</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">0</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">1.11</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">824.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">332</FLD>
<FLD NM="TOTAL COMP PREMIUM">123</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">334</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">8</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R2C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F4">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
</REGIONS>
</LOB>
</LOBS>
- <RETINFOS>
<TOTALRI>0</TOTALRI>
</RETINFOS>
</POLICY>
</POLICIES>
</RATEREQUEST>
</RATABASECALC>
Above xml data - some <...OUTPUT> elements has some FLD elements. and i want to take those outputelemt's FLD Elements data and update my oracle tables.
Note: FLD = "Attribie" are the colums name of the tables
back to top

How to find out the best settings for BDT

Hi there.
I am trying to predict a movie rating. I downloaded datasets from IMDb, prepared them. A tried all of the regression algorithms, but the best result is giving Boosted Decision Tree. Now I am dealing with the best settings in this algorithm.
With default, running time was 69 seconds and the mean absolute error was 0.4844, which is quite much I think. So I tried to improve it by changing parameters of the BDT module. I tried to set Leaves per tree to 150 and than experimentaly find
remaining parameters. I've come to Samples per leaf=12, Learning rate=0.04 and
Number of trees=700. Running time was 78 seconds and mean absolute error was 0.4596.
Input of the algorithm is joined matrix with 14 columns (11 features) and 67672 rows splitted into 70:30 (training:testing).
Is there any way how to find out the best setting of Boosted Decision Tree?

Yordan's suggestion is correct, though the documentation is a bit outdated.
You can use the single parameter + sweeper mode or define your own custom ranges in the BDT module with the Parameter Range setting
Regards,
aK

How to find the Contract Start date

Hi Friends,
with the help of the Transaction type, Item Category,reference Interest rate, how to find the Contract Start date/Billing Strat date and the Contract number.
Regards,
Raju.

Hi
naj you can find the contract start date and billing date in crmd_order Financial details data tab, start of contract and Billing and the contract no u will find after Approval of Eligibility Norms, then save go to actions create certificate of acceptance the you will get contract number
Reward with Points
Venkat

How Do You Determine Flat Rates?

I usually charge by the hour but I'm curious how other editors determine flat rates at a client's request. In my particular instance, I've been asked to edit a 6-camera mutli-can concert shoot. The client will supply all materials and choose the specific songs they want for a 1-hour final cut. Afterwards I'll author a DVD complete with motion menus and bonus materials. I'm finding it challenging to determine how may hours this may take ahead of time. It's easy to determine the capturing and outputing and transcoding times but I'll have to guesstimate real editing time. Any thoughts?

Always overestimate. Give them freebies.
I overestimate time and tell the clients that it's a "safe" estimate, then knock a few hours off their bill when the job is complete. They're under budget now, and I'm still making a good profit. Everybody's a winner.
Tell them the encode is free, but add a few hours somewhere else. (You'll do the encode while you sleep anyway, right?)
Keep in mind when setting your hourly rate that they're not just paying for you, they're paying for your system as well.
Also, are you editing the full show, then cutting out songs they don't want? Make sure you account for that as well.
I always overestimate. Period. Then you have leeway before or after they accept the bid. Maybe you're a bit over their budget? Give them the hour of render time and sync time for free. They think they're getting a better deal, you're making that money up somewhere else, anyway.
Also, if you overestimate in every area, when you come upon an unexpected expense somewhere else, you have money somewhere. Example, I'm just burning masters for a DVD I just completed. I neglected to factor in a $700 rush fee from the replicator when I quoted the job. Luckily, I overestimated $1000 for gear from the shoot. I take that $700 from there and still bill $300 less than the estimate.
Leave yourself extra everywhere you can. If there's a ton left over, make your client the hero and bill a little less. If there's just a bit left over, keep it and buy yourself something pretty.

How to find out how many space character in setence (string var) ?

Dear all Master,
I need Your help please.
Topic:
Script Editor.
My System:
-CUCM 7.0
-UCCX 7.0 premium
-Nuance recognizer 9.0
Question:
ABC = string var.
ABC = "this is sample"
2 space character in ABC string var.
How to find out how many space character in ABC var ?
Regards,
Susanto

Hi
Create a int variable called whatever you want, then insert a SET step.
Set the variable to the new int you created, and then paste this into the 'value' field:
String[] myarray = teststring.split(" ");
return myarray.length -1 ;
Basically it splits the string into chunks each time it hits the " " character.
This results in an array of the resulting chunks (i.e. words), which is one more than the number of spaces. -1 from that, and you have your int variable set to the number of spaces.
Regards
Aaron
Please rate helpful posts...

How can I improve the rate of success in Siri recognizing what I am sayin (rate of success nil, to date).

How can I improve the rate of success in Siri recognizing what I am saying (rate of success nil, to date)?

justjesper wrote:
Excelent question.
I have been searching around, and it looks like a lot of users is asking this question.
Where can I make Siri learn my accent ? Some users was talking about a feature where you could correct Siri so it would learn, but I have not been able to find it.
Nor have I, but it does seem to get better as I go along, so maybe it learns.

How to find Tcodes available in BW system

HI to All,
Pls can anybody tell me how to find the available Tcodes in BW(either production or quality).Whats the procedure to find the existing Tcodes in the system.
Regards,
MSM.

Hi MSM,
You can check all transaction here..
http://www.easymarketplace.de/transactions.php
http://www.sap-img.com/general/find-the-list-of-sap-transaction-codes.htm
check this link for list.
http://www.sapdevelopment.co.uk/tcodes/tcodes.htm
just refer the following link :
http://allsaplinks.com/transactioncodes.html
Listed here are the various ways you can find the list of transaction codes and their usage:
Use transaction SE11 - ABAP Dictionary:
Fill in the Database table name and click the Display button.
- TSTC table will contain all the Tcodes and
- TSTCT table will contain all the Tcodes with Texts.
Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
or
Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
or
Goto transaction SE93
There are two ways where you can find the list of transaction codes in SE93.
Method 1:
You must be familiar with the starting characters strings for each of the R/3 application modules.
Assuming you know that most Materials Management transaction codes start with MM.
In the Fields: Transaction code, type in MM* and press the function key F4
The list of transaction code starting with MM will be displayed.
Method 2:
On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
check previous posting
Transaction Codes for BW Developers
SAP BW n R/3 transactions.
table TSTCT contains all the transaction codes
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSDBC DB connect
RSDDV Maintaining Aggregates
RSIMPCUR Load Exchange Rates from File
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLGMP Maintain RSLOGSYSMAP
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSRCACHE OLAP: Cache Monitor
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
SE03 Transport Organizer Tools
SE06 Set Up Transport Organizer
SE07 CTS Status Display
SE09 Transport Organizer
SE10 Transport Organizer
SE11 ABAP Dictionary
SE24 Class Builder
SE80 Object Navigator
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV*
RSSM Authorizations for Reporting
SM04 User List
SM12 Display and Delete Locks
SM21 Online System Log Analysis
SM37 Overview of job selection
SM50 Work Process Overview
SM51 List of SAP Systems
SM58 Asynchronous RFC Error Log
SM59 RFC Destinations (Display/Maintain)
LISTCUBE List viewer for InfoCubes
LISTSCHEMA Show InfoCube schema
DB02 Tables and Indexes Monitor
DB14 Display DBA Operation Logs
DB16 Display DB Check Results
DB20 Update DB Statistics
r/3 (bw related)
SBIW BIW in IMG for OLTP
BD61 Activate Change Pointers - Generally
BDLS Convert Logical System Names
BF11 Application Areas
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSO2 Oltp Metadata Repository
RSO3 Set Up Deltas for Master Data
LO setup table
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
Check out AHP's reply specifically in the link:
urgent
Hope this helps.
Regards,
Ravikanth.

How to find Enqueu/Dequue rate in a QUEUE?

Similar Messages

Maybe you are looking for