How to find out a lot for a specific stock posting?
Dear Friends
In our system every day 3 times rej posting ( and ok qnty posting) is done and 3 lots are supposed to be cleared for 3 consecutive shifts A, B, C. Now I found on 2.9.2009, 4 rej postings are done in mb51, (The unmatched rej qntity is X) rej storage.But I found only three lots are cleared from qa32.
I found that none of these 3 lots have rej qnty/ok qnty as X
So there must be a fourth lot that was cleared on 2nd sep but created on some other date. Can u tell me how to find out this lot?
Can I find out inspection lot no from material doment created due to stock posting in mb51?
In qa32 we can find production order number, but can i find order confirmation number from qa32?
Thanks
Chandra
Hi Chandra
It is very muxh possible to view the Inspection lot from the Material document if know either through MB51 or MIGO
Enter material document number>at the bottom there is QTy tab>Here you will find "Status Gr Doc" Inspection lot.
Also
Just check the Material document's mvt type for Qty X it may not be 321.......Revert back
This document may be generated due to additional mvt done in US screen.
Regards
Sujiy
Similar Messages
-
How to find out the Tcodes for the exits
Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
EXIT_RFEKA400_001
EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
USEREXIT_FIELD_MODIFICATION
USEREXIT_MOVE_FIELD_TO_VBAK
USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
HISTORICAL_VALUES
MD_ADD_ELEMENTS
MD_CHANGE_MRP_DATA
MD_PIR_FLEX_CONS
MD_PLDORD_POST
ME_REQ_POSTED
NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PMi have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong! -
How to find out the description for the given field?
Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri... -
URGENT: How to find out the Tables for Routines in BW.
Hi BW Gurus,
How to find out the Tables for Routines in BW.
I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
thanks in advance,
points will be rewarded.
Regards,
Maruthi.Hi Maruthi,
Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
Cheers,
Praveen. -
How to find out the link for the tables for sub contract PO
Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK. -
How to find out responsibility attached for particular user through query
hi
How to find out responsibility attached for particular user through query
Regards
9841672839Hi,
Following sql will help you find the responsibilities associated with the users in oracle applications.
SELECT frt.RESPONSIBILITY_NAME, furg.end_date
FROM
fnd_user_resp_groups furg,
FND_RESPONSIBILITY fr,
fnd_responsibility_tl frt,
fnd_user fu
WHERE fu.user_name = ‘&&username’
AND fu.user_id = furg.user_id
AND furg.responsibility_id = fr.RESPONSIBILITY_ID
AND frt.responsibility_id = fr.RESPONSIBILITY_ID
ORDER BY 1
Cheers... -
How to find out the script for the table using SQL
Hi,
Could any one tell me that how to find out the script for the table using SQL.
Thanks,
kamalKamal,
You can find the SQL query in Advanced tab of Answers
Thanks,
Balaa... -
Where and how to find the storage locatation for the consignment stock
where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no - werks - batch
xxx sg11 - 200352ac
table : mchb
material no - werks -lgort - batch
xxx sg11 sg10 200352ac
xxx sg11 gs11 200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN -
How to find out the infoProvider for a given dimension table?
Experts:
In RSA1, I want to find out the infoProvider for a given dimension table.
But I am not sure how to display the tables linked to a given infoProvider.
Could you provide a way to display all tables linked to a given infoProvider?
Thanks a lot!See, The dimension table starts with Dcubename1 and incremental Dcubename2 .... so on
Ex.ZSD_C01 is your cube name
Dim tables starts for this is /BIC/DZSD_C011 /BIC/DZSD_C012 ...
Goto - LISTSCHEMA - derive cube name from given dim table and enter cube name - execute - will show you all the tables -
How to find out data source for a datawindow?
I have a datawindow and I want to identify it's datasource.
I open this datawindow in pb. then in design menu, Data Source is disabled. It means not direct sql
Then I go to Column Specific(small window), and right click on any space, in the popup menu, there is no 'Stored Procedure...'. It means not procedure.
(see screeshot attached)
then how to find out the data source for this datawindow?Hi Kent;
1) I would use the RHMB on the DWO in the System Tree and select the "Edit Source" option.
2) In the DWO source, locate the "TABLE ( ...." line
3) If the next major line starts with "DATA(...." then this is an external DWO.
4) If the next major line starts with "Retrieve(...." then this is a normal DWO (SQL or SP based).
5) If the next major line starts with "webservice=(WSDL...." then this is a Web Service based DWO.
Note: if your DWO has no #3, 4 or 5, then its external.
HTH
Regards ... Chris -
How to find out the URL for OAM at a new site
Hi
if you turn up at a new site, and you only have the oracle / applmgr account password
to a linux server, how would you go about finding out the URL for OAM ?
Many thanksOAM URL is:
http://hostname.domain:port/servlets/weboam/oam/oamLogin -
How to find out report program for a particular smartform?
Hi,
How to find out report program from which the smart form function module is calling?
Thanks.Hi
There's no tools to do that, u can only find out the program where a string with the name of your smartform is: probably it'll be your program.
U can try to use the program RPR_ABAP_SOURCE_SCAN in order to looking for a string a abap program.
But if the name of smartform is transfer to program dinamycally, u've few chances.
Max -
How to find out Address no for each item
Hi All,
how to find out address no (ADRNR) for each item in the PO (ME23N).
will it created by automatically or mannually?
Please Very urgent.
Thanks,
Subbu.Hey Subbu,
We meet again
check
table EKPO
for each line item for a particular PO
there u have adrnr.
This is the address number for each line item -
How to find out table name for the field in the webUI
Hi.
I am in CRM2007.
So i go to the transaction code BSP_WD_CMPWB
In that i provide the component name as CRM_UI_FRAME.
I press the Test button.
So, it opend the WebUI.
I want how to find out table of the particular input field?
I mean from which table the data is retrived how to find out?
When i enter some thing in the input field how to find out in which table that data is stored?
By pressing F2 on the input field it opend View and Component Name.
I want find out table of that particular field. How to find it?
If anybody know about this explain it with Screen shorts if possible.
Thank You.
Krishna. B.hi
goto tx genil_model_browser. Suppose you want to find fields reated to your order header eg sold to name. In component set write all and press F8. Then goto access object and in access object click on node BTAdminH. Click on attribute structure. Here you will find structure and attributes. If you click relationship then you will see all the relationship wrt btadminh. open any r/s that you require. and click on other object and attribute. You will get to know the structure.
Best regards
Pankaj kumar -
How to find out Query Statistics for the initial selections
Hi,
Is there a way to find out the statistics for the initial query execution(without any navigations)
/SantoshHi,
For knowing the statistics of the Query (Responce performence). U can find out with T-Code RSDDSTAT. The base rule is U have to execute the Query atleast once. If you the aggrigates are there at DATA TARGET level u can get a details view with TCode RSDDV.
Best Regards
Maybe you are looking for
-
Moving my library from a PC to my new iMac!
Please can anyone help - I've been using iTunes on my dell laptop for a year and have just taken delivery of my gorgeous new intel iMac!! I want to move my library from the laptop to the iMac, is this possible????
-
How to Initialize Container Element in BPM..No Payload found
Hi All, How do we initialize a container element in BPM if that container element is a message Interface. I am doing exception handling in BPM, so whenever a exception occurs i need to send a mail. So in the exception box i have a transformation step
-
Repeating frame(s) not continuing to next page
Here is what I have: grp 1 r-frame 1 grp2 r-frame 2 grp3 r-frame 3 grp4 r-frame 4 r-frame 5 r-frame 6 r-frame 7 grp1 r-frame 1 will not continue to the next page when I have multiple grp3 r-frame3 records (there will be 1 record for 1 of the frames u
-
Hi Forum, I want to plot a graph in Web Analyzer. On Y-Axis, Key Figure A has to be shown. On X-Axis, Key Figure B has to be shown. I want to plot Chara C as a point with respect to these 2 Key Figures. Can you please help me with some documentation.
-
Scrolling (carousel) function won't work
Hi a scrolling function on this site http://thepienews.com/ (top stories, carousel feature built in wordpress) has suddenly stopped working on my macbook pro and i have no reason why. by this i mean i can't make my mouse manually switch between stori