How to find out gmail address

how do you find out your gmail address when you activated phone?

Go to Settings->Accounts & sync.
Alternative method
Go to Market->Menu->Accounts.

Similar Messages

How to find out the address of a servlet without a Request

Hi all,
in a servlet, I need to find out its address before the first client request (the best would be in the init method).
So I have no access to a HttpServletRequest object that normally offers this information.
Is this possible?
Thanks,
RayBen

If you need to know the host name, then something says me that your code is already not portable :)
No, it is not possible. Not without nasty stuff or lookups. Why do you need to know about it then? It sounds like if you want to set some host-specific settings. You can better use the init-param in web.xml or configuration files for this than hardwiring it in Java source code.

How to find out email address for my apple id

Hello Folks.
I have a bunch of songs that i bought and downloaded under an apple id that i don't currently use. I have forgotten the password for that account and I cant remember which e-mail, address was associated with it. How can I log in and authorize those songs please?
R
Mike

Hello testermike,
After reviewing your post, I have located an article that can help in this situation. It contains advice on how to identify the account name of your Apple ID:
Recovering a forgotten iTunes Store account name
http://support.apple.com/kb/HT1920
If you have forgotten your iTunes Store account name, you can recover it if you have made iTunes Store purchases by following these instructions:
Note: In most cases, your iTunes Store account name will be your email address. You may want to try signing in using your email address as your iTunes Store account name.
Open iTunes
Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
Choose File > Get Info.
Click the Summary tab.
The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How to find out who's texting you from an iCloud email address?

how to find out who's texting you from an icloud email address?

OK after a bit of research I found a way to achieve this.
I simply looked up the email address in ADUC, then did a search in SP with the display name. I could locate the list and manually confirm it was configured with the incoming email address I was looking for.
I also found the below script on Stackoverflow, but got "The 'using' keyword is not supported in this version of the language." when I tried to run it. Any idea how to fix that? I'd like to have a script to link a library to an email address istead of the
manual approach described above.
http://stackoverflow.com/questions/4974110/sharepoint-how-do-i-find-a-mail-enabled-list-if-i-only-have-the-email
$SiteCollection = ""
$EmailAddress = "" # only the part before the @
# Load SharePoint module if not done yet
if((Get-PSSnapin | Where {$_.Name -eq "Microsoft.SharePoint.PowerShell"}) -eq $null) {Add-PSSnapin Microsoft.SharePoint.PowerShell;}
cls
using System;
using Microsoft.SharePoint;
namespace FindListByEmail
class Program
{a
static void Main(string[] args)
string siteUrl = $SiteCollection;
string email = $EmailAddress;
using (SPSite site = new SPSite(siteUrl))
foreach (SPWeb web in site.AllWebs)
try
foreach (SPList list in web.Lists)
if (list.CanReceiveEmail)
if (list.EmailAlias != null && list.EmailAlias.Equals(email, StringComparison.InvariantCultureIgnoreCase))
Console.WriteLine("The email belongs to list {0} in web {1}", list.Title, web.Url);
Console.ReadLine();
return;
finally
if (web != null)
web.Dispose();

HT4489 How to find out which contact(s) not imported in icloud address book?

How to find out which contact(s) not imported in icloud address book?

You can find out which once are in the cloud, by going to icloud.com and signing in.

How to find out Address no for each item

Hi All,
how to find out address no (ADRNR) for each item in the PO (ME23N).
will it created by automatically or mannually?
Please Very urgent.
Thanks,
Subbu.

Hey Subbu,
We meet again
check
table EKPO
for each line item for a particular PO
there u have adrnr.
This is the address number for each line item

How to find out Integrated weblogic server version

hi experts,
am using jdev11.1.1.5.0
i h'd big doubt ;)
how to find out Integrated weblogic server version
i think am using weblogic10.1.3. but am not sure?
so how can i found out.
this my log. but i dont see any info about version.
*** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_1\jdk\jre\bin\classic;C:\DevSuiteHome_1\jdk\jre\bin;C:\DevSuiteHome_1\jdk\jre\bin\client;C:\DevSuiteHome_1\jlib;C:\DevSuiteHome_1\bin;C:\DevSuiteHome_1\jre\1.4.2\bin\client;C:\DevSuiteHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Duser.timezone="+05:30" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Feb 17, 2012 5:50:40 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Feb 17, 2012 5:50:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00220. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Feb 17, 2012 5:50:48 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log00102. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log.>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Feb 17, 2012 5:51:02 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application GeneralLedger is not versioned.>
<Feb 17, 2012 5:51:07 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Rapppdf is not versioned.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00208. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Feb 17, 2012 5:51:27 AM GMT> <Warning> <Server> <BEA-002611> <Hostname "rmsys0061", maps to multiple IP addresses: 192.168.0.161, 192.168.2.161>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.2.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 51640 ms.
IntegratedWebLogicServer started.
[Running application frmtesting on Server Instance IntegratedWebLogicServer...]
[11:21:30 AM] ---- Deployment started. ----
[11:21:30 AM] Target platform is (Weblogic 10.3).
[11:21:31 AM] Retrieving existing application information
[11:21:31 AM] Running dependency analysis...
[11:21:31 AM] Deploying 2 profiles...
[11:21:32 AM] Wrote Web Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting\ViewControllerWebApp.war
[11:21:32 AM] Wrote Enterprise Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting
[11:21:32 AM] Deploying Application...
<Feb 17, 2012 5:51:33 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application frmtesting is not versioned.>
[11:21:40 AM] Application Deployed Successfully.
[11:21:40 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[11:21:40 AM] http://192.168.0.161:7101/frmtesting-ViewController-context-root
[11:21:40 AM] Elapsed time for deployment: 11 seconds
[11:21:40 AM] ---- Deployment finished. ----
Run startup time: 10812 ms.
[Application frmtesting deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/frmtesting-ViewController-context-root/faces/untitled6.jspxhttp://127.0.0.1:7101/console/login/LoginForm.jsp. it stated as weblogicserver 11g admin console
At the botton(copy right section) 10.3.5.0

Hi,
There is one more method,i know
Set the JAVA_HOME and PATH
then execute the
$WL_HOME\wlserver_10.3\server\bin>setWLSEnv.cmd
Go to directory which contains weblogic.jar ($WL_HOME\server\lib) and run below command
$WL_HOME\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.version
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255
Hope this will be helpful,
Regards
Fabian

How to find out the max mem can be allocatedTT for 32 bit Win ?

How to find out the maximum Permanent Data Size and Temporary Data Size that can be allocated for the Oracle Times Ten for 32 bit Windows OS.

Hi Chris,
Am I write in saying that this also depends on shared memory setting as well?
If that is the case, on a platform like window 2003 32-bit, one cannot have more than 4GB of shared memory. Windows Server 2003 includes support for a startup switch (entered in the boot.ini file) that allows the allocation of memory and memory address space. Regardless of the amount of physical memory that is installed on the system, the operating system uses a virtual address space of 4 GB. Out of that amount, by default, 2 GB is allocated to user-mode processes (for example, Oracle or TimesTen) and 2 GB is allocated to kernel-mode processes (for example the operating system and others). In a nutshell on systems that have more than 1 GB of RAM, this startup switch can be used to allocate more memory to applications (3 GB) and less memory to the operating system (1 GB). However, adding adding the /3GB switch to the boot.ini file will not increase the amount of physical RAM memory, the 3GB switch just tells the computer to allocate the existing memory space differently.
For a 32-bit TimesTen the limit on memory cannot be more than 2GB (PermSize+TempSize). For example on Linux 32-bit I have 1024MB and 512MB for these two parameters.
Thanks,
Mich

How do find out failure in invoking a partner service from BPEL

Helllo,
When running my SOA composite I encountered the following error. I haven't found out how to find out what exact host:port it is trying to hit and failed. Does anyone know how to find out this info or from which deployment/admin interface can I find out information related to the partner service, such as wsdl, host/port, and other parameters?
thanks,
Joe
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricInvocationException: Unable to find the WSDL port defined for service {http://xmlns.oracle.com/scheduler}ESSWebService and port {http://xmlns.oracle.com/scheduler}SchedulerServiceImplPort. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.</summary></part><part name="detail"><detail>Unable to find the WSDL port defined for service {http://xmlns.oracle.com/scheduler}ESSWebService and port {http://xmlns.oracle.com/scheduler}SchedulerServiceImplPort. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.</detail></part><part name="code"><code>null</code></part></remoteFault></bpelFault>

Your SOA project should have a somethingRef.wsdl where you can find the location of your WSDL.
<wsdl:import namespace="http://www.example.com" location="http://example.com/example.do?wsdl"/>
In the actual WSDL (not the ref) you may have your actual servername/portname in the tag address at the end of the file...
<WL5G3N0:service name="example">
<WL5G3N0:port name="exampleSoap" binding="WL5G3N2:exampleSoap">
<WL5G3N3:address location="http://example.com:6011/services/example"/>
</WL5G3N0:port>
</WL5G3N0:service>

HT1391 Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

.from iTunes, go to View > Show sidebar
From sidebar > Itunes Store > Click top left on your Apple ID email address > Account > ...scroll down > Purchase History > View All

How to find out ASE backup server?

As backup server is a separate service. how to find out if ASE engine has backup server or not?
Or how to get into backup server and find out what ASE this backup server is working for?

Just to add a little to Gek's reply, addressing your second question:
Or how to get into backup server and find out what ASE this backup server is working for?
That you can't really do. A backupserver can be used by multiple ASE servers and doesn't maintain any permanent registry of servers it is used by. From a connection to ASE, you can do a SYB_BACKUP....sp_who remote procedure call to get some information on current activity on the backupserver, but the information is pretty limited.
1> SYB_BACKUP...sp_who
2> go
spid        status     loginame                       hostname     blk cmd
           1 sleeping   NULL                           NULL         0   CONNECT HANDLER
           2 sleeping   NULL                           NULL         0   DEFERRED HANDLER
           3 runnable   NULL                           NULL         0   SCHEDULER
           4 runnable   NULL                           REL157SP1xx* 0   SITE HANDLER
           6 running    sa                             bret-sun2    0   NULL
(5 rows affected)
My ASE's name is REL157SP1xx_bret_sun2, so you aren't even getting the full name of the ASE backupserver is currently working with. I had just booted the backupserver, so the Site Handler was started to handle the RPC call, it doesn't even mean that server had ever dumped a database.
While you can connect to the backpserver directly with a client, the backupserver does not have a command language processor, so any commands you send directly to backupserver (as opposed to rpc calls) will only get the response "no language handler installed", like this:
bret-sun2% isql -Usa -P -Srel1572nb_bret_sun2_back
1> select @@version
2> go
No language handler installed.
That is why the (polite) way of shutting down a backupserver is to issue
"shutdown SYB_BACKUP" from a client logged into an ASE. (the impolite
way is to use an OS kill command against the backpserver process).
-bret

Hi all, How to Find out the table where Cutomer Enqu. status is Stored??

How to Find out the Customer Inquiry Status.
I am not able to find in which table Status of Customer Inquiry is Stored.
Is There any FM to find out This.

Please post your question in the right forum to have your query addressed soon...
I think you can check JEST table all status

Cockpit- How to find B1i Server Address

Hi,
I am trying to enable Dashboard. It is asking for B1i Server address. I have tried "http://127.0.0.1:8080/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.runtime/INB_HT_CALL_SYNC_XPT/INB_HT_CALL_SYNC_XPT.ipo/proc" but it gave me an error message that it is unable to connect. Does anybody know how to find B1i server address?
Thanks.
Abdul...

Abdul,
Instead of using 127.0.0.1 ... try using either the actual B1i Servers IP address or the name of the machine. You can also review the B1iC troubleshooting guide here ...
[Guide Deleted 31 OCT 2011 - Contained Out of Date Information]
Eddy
Edited by: Jason Lax on Oct 31, 2011 10:48 AM

How to find out IODs number for Cisco AP model 1602

Hi All
i have 5 cisco AP with model 1602, i need some help on how to find out the IODs from the device, the reason to do this is to add all the AP to our solarwinds server, hope you can help, Thanks !
Keith

we are using Stand Alone, as how to find out the IODs from the device, as i have already enable snmp on the AP, and has been added to the solarwinds server, and below is what solarwinds replied, how to obtain OID ?
Yes, your AP device can now be monitored even the interfaces, availability, CPU, memory, etc., however you mentioned that you also want to monitor the clients of your AP, the client's ip address, the name of the clients and other resources.
In order to do this, we need to use the Universal Device Poller, we will manually configure NPM to poll the other resources of your AP, that's why we need the OID.

How to find the MAC address of my iPad2?

My WiFi hot spot has MAC address filter for better security.
But I cannot find the MAC address of my new iPad2.

If you need to setup wifi to start the MAC address with iPad, try the http://www.ipad-tablet-help.com/2010/03/how-to-find-ipad-mac-address.html to find it out. Works for iOS5.

How to find out gmail address

Similar Messages

Maybe you are looking for