How to find Packaged Stored Procedure?

Hi,
Is there any API routine to find out if a particular StoredProcedure belongs to a package or not?? Or in the other way around , can i get to know about a list of Stored procedures a particular database package has?
( P.S :- getProcedures method in DatabaseMetadata gives just a list of all Standalone and Packaged procedures as one list. )
Narendran.

Hi,
I have the same problem to call a stored Procedure in a Package.
If my procedure is not in a package, everything is right.
And I musn't indicate all the name, because I musn't put '.' in the name (of the procedure), in my DT on XI.
It would be so nice to have an answer.
Rémi

Similar Messages

How to call Packaged Stored Procedure in JDBC Adapter?

hello frnds,
I m working on a SAP R/3 -> XI -> Oracle scenario. Here on receiver side i m using JDBC Adapter in which i m using a stored procedure.
I have my stored procedure in a Package. Example : package "PKG_SPARES_VOR_UPLOAD" and in that stored procedure "pr_spares_vor_po_hdr_upload".
i have checked that if i write this stored procedure outside the package then it works fine... but if i put it into the package then it is giving me error that ....
" Receiver Adapter v2112 for Party '', Service 'BS_ORADEV':
Configured at 2006-08-16 10:12:14 GMT+05:30
History:
- 2006-08-16 11:02:04 GMT+05:30: Error: TransformException error in xml processor class: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PR_SPARES_VOR_PO_HDR_UPLOAD' (structure 'statement'): java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00201: identifier 'PR_SPARES_VOR_PO_HDR_UPLOAD' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored ".
please help me out with this problem.
Thankx,
Regards,
Audumbar

Hi,
I have the same problem to call a stored Procedure in a Package.
If my procedure is not in a package, everything is right.
And I musn't indicate all the name, because I musn't put '.' in the name (of the procedure), in my DT on XI.
It would be so nice to have an answer.
Rémi

Reg: Find Current stored procedure status in oracle database

Hi Gurus,
How to find the stored procedure status in the current oracle database (ie) whether it is running or not.
Is there any view or dbms package to find the status of the stored procedure.
And i also want to find the last execution time of the stored procedure is there any view to find the status
Thanks in Advance.

Note that using DBA_HIST_SQLTEXT requires Diagnostic Pack license:
in 10G http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm#CIHGFIAF says:
>
All data dictionary views beginning with the prefix DBA_HIST_ are part of this pack, along with their underlying tables.
>
in 11G http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/options.htm#CIHIHDDJ says:
>
All data dictionary views beginning with the prefix DBA_HIST_ are part of this pack, along with their underlying tables.The only exception are the views: DBA_HIST_SNAPSHOT, DBA_HIST_DATABASE_INSTANCE, DBA_HIST_SNAP_ERROR, DBA_HIST_SEG_STAT, DBA_HIST_SEG_STAT_OBJ, and DBA_HIST_UNDOSTAT. They can be used without the Oracle Diagnostics Pack license.

How to call a stored procedure using its package name in Oracle

hi
we're doing a JDBC scenario where we call a stored procedure(a.prc) using its package name(b)The stored procedure has In /Out/IN-OUT parameter.
i have got 2 queries:
1- How to call the stored procedure using it's package.
2- How to capture the In/Out parameter in the response.

hi Prateek
thanks for the reply.
However when i tried mapping it to Package.procedure, communication channel throws the error saying that Package.proceudre needs to be declared.
As i said , the procedure has IN-OUT parameter too.In oracle we need to write a block if we want to read the IN-OUT parameter.
How to get the IN-OUT parameter in XI?

How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?

Hi
I have a stored procedure. It can be executed like this
exec test @p = 1;
exec test @p = 2
exec test @p = n;
n can be hundred.
I want the sp being executed in parallel, not sequence. It means the 3 examples above can be run at the same time.
If I know the number in advance, say 3, I can create 3 different Execution SQL Tasks. They can be run in parallel.
However, the n is not static. It is coming from a table.
How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?
I think about using script task. In the script, I get the value of n, and the list of p, from the table, then running a loop with. In the loop, I create a threat and in the threat, I execute the sp like : exec test @p = p. So the exec test may
be run parallel. But I am not sure if it works.
Any idea is really appreciated.

Hi nam_man,
According to your description, you want to call stored procedures in parallel, right?
In SSIS, we can create separate jobs with different stored procedures, then set the same schedule to kick the jobs off at the same time. In this way, we should be careful to monitor blocking and deadlocking depending on what the jobs are doing.
We can also put all stored procedures in SSIS Sequence container, then they will be run in parallel.
For more information about SSIS job and Sequence container, please refer to the following documents:
http://www.mssqltips.com/sqlservertutorial/220/scheduling-ssis-packages-with-sql-server-agent/
https://msdn.microsoft.com/en-us/library/ms139855(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How to call a stored procedure from WorkShop

Hello Everyone .. I'm quite new with WebLogic 8.1 & WorkShop, so please bare with
me .. Today I'm simply trying to find out how to call a stored procedure from
within workshop, using any of the DB Controls .. I see workshop provides a way
create a Java Control, Rowset Control, but it wont easily allow for a stored procedured
to be entered in place of the inline query .. Perhaps I've over looked it. Any
advise on the best way to tackle this task will be appreciated.
Atahualpa

Atahualpa--
Maybe this will help:
http://edocs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/database/conStoredProcedures.html
Eddie
Atahualpa wrote:
Hello Everyone .. I'm quite new with WebLogic 8.1 & WorkShop, so please bare with
me .. Today I'm simply trying to find out how to call a stored procedure from
within workshop, using any of the DB Controls .. I see workshop provides a way
create a Java Control, Rowset Control, but it wont easily allow for a stored procedured
to be entered in place of the inline query .. Perhaps I've over looked it. Any
advise on the best way to tackle this task will be appreciated.
Atahualpa

Strange download size of on calling packaged stored procedure in VB6

Hi,
I tried to use VB6 to call oracle stored procedure with ref cursor as output parameter under a package in 10g database (10.1.03). Oracle client uses windows 9.2 / 10.1.02 (Oracle OLEDB Provider) . I found that when the package size increases(> 1000 lines codes), the data size transfer from database to VB client also increases. I try to trap the binary data flow between VB6 and database when calling packaged stored procedure. I found that VB6(or oracle client ??) will first download package spec then execute the requested stored procedure. This may explain the cause of increasing size.
However, this large download size for calling only one of the procedure will make my application run slowly when my application uses the package much. How can I solve this problem ? Does this relate to oracle client(p.s. this problem disappear when using Microsoft OLEDB Provider)?
Thanks
Steven

You can use a wrapper to get compiled code and if it's 10g you can do even more by putting it in a library.
OLEDB from VB6 still using Oracle 'Client' as you call Oracle NET.

Pass BLOB as parameter to Packaged Stored Procedure

Does JDBC (thin or otherwise) support passing a BLOB as a parameter to a packaged stored procedure in Oracle, or do we have to do an 'insert' statement to get it in?
All the articles I've seen seem to refer to insert and select, but I want to strictly enforce all access to the database being through a package rather than table level access.
We've certainly had no difficulty receiving blobs from the resultset returned by our packaged procedures.
Any help appreciated,
Thanks
Jason.

C5112736 wrote:>
> And then these 2 formulas 'Formula # 1' and 'Formula # 2' can be used to pass on to the stored procedure.
Can someone please demonstrate exactly how to use formula results as date parameters to a SQL stored procedure? Keep in mind, there are two parameters to the stored procedure.
I have gleaned this much: Use Add Command and insert the procedure with
EXEC ServerName.dbo.usp_sprocName;1 '{?StringParameter}'
but if I try to do
{CALL ServerName.dbo.usp_SprocName({@Formula1},{@Formula2})}
then it gives the error "No value given for one or more required parameters".
Both of the parameters are VARCHAR(50).
I have finally found this link: [http://msdn.microsoft.com/en-us/library/ms710248(VS.85).aspx|http://msdn.microsoft.com/en-us/library/ms710248(VS.85).aspx]
This Microsoft site defines the format of the ODBC escape sequences, but I still do not know how to convince Crystal to insert it's parameter results or formula results.
Pulling what's left of my hair out . . .
~ Shaun

How to schedule a Stored procedure to run every hour in SQL server express

Hi,
I am using SQL server express and I want to schedule a Stored procedure to run every hour.
The Stored Procedure name is UpdateData.
Can someone please give an example of how i can schedule this to run every hour, given that I do not have SQL Server agent on my express edition.

Hello,
You will find more options on the following thread.
http://stackoverflow.com/questions/1675206/how-to-run-a-stored-procedure-every-day-in-sql-server-express-edition
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to use a stored procedure as a datasource in Crystal Report for Eclipse

Hi All,
I've written a stored procedure in oracle 10g with few input parameters and one refcursor output parameter. I want to use this stored procedure as a data source for creating a report in "Crystal Report For Eclipse 3.6.0".
When I tried to add this stored procedure to the report using the connection explorer, I don't see any option to do this. But when I try to add any table, it shows options like "Add to the current report"....
Can anybody assist me how to use a stored procedure as a data source in "Crystal Report For Eclipse"?
Which driver should I use to connect to the oracle database? I tried using JDBC Driver for Oracle.
Thanks in advance.

Did you solve your problem? How did you do?

How to use a stored procedure in oracle reports

How to use a stored procedure in oracle reports

Dear,
In report triggers you can write your procedure/functions or call it like
function AfterPForm return boolean is
begin
myprocedure(:mydate);
return (TRUE);
end;
Thanks
Jamil

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to introspect a Stored Procedure in BPm 10g

Could some give points on how to introspect the Stored procedure from BPM

Hi,
I hope you must have created DB connection in External Resources (Workspace).
So Now create one module in catalog component called DBTables, right click on the module -> New -> Catalog Component -> SQL Query -> Select the DB connection that you created earlier -> select the schema, now you can see all the procedure, tables, function that are defined in your schema.Click on the procedure that you want to import to your workspace and click on finish. The procedure will be imported to your workspace.
Hope the above will help you.
Bibhu
Edited by: Bibhuti Bhusan on Jul 14, 2011 10:44 PM

How to execute a stored procedure/function in TOAD?

Hi, All ,
Can someone please tell me how to execute a stored procedure/function in TOAD?
I have tired
EXECUTE PROCEDURENAME(888), but it doesn’t work.
TOAD give me the error: invalid SQL statement.
Thanks a lot

Write PL/SQl block.
i.e Begin
Procedure name..
end;
Then it will be excuted.
Ashutosh

How do write a stored Procedure in PL/SQL

Hi,
I am new to this forum. I am creating a webpage using Gridview in Visual Studio 2005.
How to write a Stored procedure in Oracle using PL/SQL?
I want to write a SP for the following query :
"Select S_No, Task_ID,Last_Act_Dt,Last_Act_Tm,Status from E002 Order by S_No"
Please help.

In Oracle, you normally wouldn't create a stored procedure that just does a query. Depending on what you're attempting to do on the client side, and the client libraries involved, you may be able to write a stored procedure that returns a REF CURSOR and call that. This will put some limitations on what the client can do with the results, for example. The data would be read-only and scrolling back and forth in the result set would potentially rather slow and rather expensive in terms of client memory. That makes this generally a somewhat unattractive option.
You could create a view in Oracle and just query the view in your application code. If you needed to change the query, you could then just change the view.
Justin

How to find Packaged Stored Procedure?

Similar Messages

Maybe you are looking for