How to find resource mailbox property "Add the organizer name to the subject" in Exchange 2013

Use the Resource Information tab to specify the meeting information that appears in the resource's calendar:
Delete attachments   Select this check box to remove attachments from all incoming requests.
Delete comments   Select this check box to remove comments from all incoming requests.
Delete the subject   Select this check box to remove the subject of all incoming requests.
Delete non-calendar items   Select this check box to remove non-calendar items from all incoming requests.
Add the organizer's name to the subject   Select this check box to specify whether the resource requestor's name is added to the subject of the request.
Remove the private flag on an accepted meeting   Select this check box to remove the private flag for all incoming requests.
Send organizer information when a meeting request is declined because of conflicts   Select this check box to send the meeting organizer information regarding
a denied request.
Customize the response message that organizers will receive   Select the Add additional text check box to customize the message that
the requester receives when the meeting has been declined, and then type the additional information in the Additional text field.
Mark pending requests as Tentative on the calendar   Select this checkbox to specify that all pending requests are marked as Tentative in the resource's calendar.
The delegate can then accept or deny the request as needed.
This is how these settings can be found in exchange server 2010(highlighted) but I am unable to find a similar setting in the admin center of Exchange 2013. I know this can be done through shell commands but I want to know where I can find the same UI setting
in 2013. 
Any help is much appreciated.

Those settings are not exposed in the EAC or the Resource settings in OWA, afaik. Just use the shell.

Similar Messages

  • How to find out which type of the driver is used in our application?

    Hi all,
    can anyone tell me how to find out which type of the driver is used in our application?
    Thanks in advance,
    Phoeniox

    Hi,
    Check out this...
    Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
    List drivers = Collections.list(DriverManager.getDrivers());
                   for(int i=0;i<drivers.size();i++)
                        Driver driver = (Driver)drivers.get(i);
                        String driverName = driver.getClass().getName();
                        System.out.println("Driver "+i+":::"+driverName);
    you need to load the driver and display in the same program.
    Then only you'l get the required result.
    prakhyath

  • How to find out who has deleted the production Query

    Hi All,
    I have searche SD , i can find it for infoobject deletion but i couldn't find it for Query.
    Please let me know is there any possiblity to kow
        How to find out who has deleted the production Query
    Awaiting for your replies.
    cheers

    Hi Mahesh and all,
    Thanks for all your  inputs.
    I have tried with RSRREPDIR tabel , I am unable to see that query at all.
    If I use theT-code SLG1,
      please guide me on the steps with paramets to be given in the respective ..object, subobject etc..
    OR
    could you please suggest any other way.
    cheers
    leena

  • How to find out who had deleted the function moldule? S O S

    how to find out who had deleted the function moldule Thank you very much.

    if this fm was assigned to device class (package) you'll find it in
    tables tadir, e070, e071
    try with name of function module or function group
    hope that helps
    Andreas

  • How to find out what are all the change pointers assoicated for an idoc ??

    Hi ,
    How to find out what are all the change pointers activated for an idoc ??
    Thanks,
    Varma

    Verma,
    You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
    Use tcode <b>BD61</b> to check whether change pointers are active or not??
    Hope this helps..

  • How to find last inserted record in the table.

    Version: Oracle 10g
    I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
    How to find last inserted record in the table "Manufacture".
    As i come to know that Rowid is not result perfect results. Please provide your inputs.

    user13416294 wrote:
    Version: Oracle 10gThat is not a version. That is a product name. A version is 10.1.0.2 or 10.2.0.4, etc.
    I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
    How to find last inserted record in the table "Manufacture".Not possible as your data model does not cater for it. That simple.
    If there is a need to determine some order or associate some time to an entity, then that should be part of the data model - and a relationship, or one or more attributes are needed to represent that information. Thus your data model in this case is unable to meet your requirements.
    If the requirements are valid, fix the data model. In other words - your question has nothing to do with Oracle and nothing to do with rowid, rowscn or other pseudo columns in Oracle. It is a pure data modeling issue. Nothing more.

  • How to find which function module write the relevant idoctype?

    Dear All,
    how to find which function module write the relevant idoctype?

    Hi,
    Generally the function modules of the idoc types are having a naming convention as IDOC_INPUT for inbound processing and IDOC_OUTPUT for outbound processing followed by the idoc type name
    for example : For IDOC type ORDERS
    the inbound function module will be IDOC_INPUT_ORDERS and for outbound IDOC_OUTPUT_ORDERSP
    In this way you can find the function module for a particular IDOC
    P.S: Hope this is what you have asked for
    Regards
    Sarves

  • How to find user exit implemented in the program

    how to find user exit implemented in the program or standerd transaction

    try this program to get the list of all the user exits for a transaction...
    *& Report  Z_USER_EXIT                                                 *
    *REPORT  Z_USER_EXIT                             .
    REPORT z_find_userexit NO STANDARD PAGE HEADING.
    *&  Enter the transaction code that you want to search through in order
    *&  to find which Standard SAP User Exits exists.
    *& Tables
      TABLES : tstc,     "SAP Transaction Codes
               tadir,    "Directory of Repository Objects
               modsapt,  "SAP Enhancements - Short Texts
               modact,   "Modifications
               trdir,    "System table TRDIR
               tfdir,    "Function Module
               enlfdir,  "Additional Attributes for Function Modules
               tstct.    "Transaction Code Texts
    *& Variables
      DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
      DATA : field1(30).
      DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
      SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
      SELECTION-SCREEN SKIP.
      PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
      SELECTION-SCREEN SKIP.
      SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
      START-OF-SELECTION.
    Validate Transaction Code
        SELECT SINGLE * FROM tstc
          WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
        IF sy-subrc EQ 0.
          SELECT SINGLE * FROM tadir
             WHERE pgmid    = 'R3TR'
               AND object   = 'PROG'
               AND obj_name = tstc-pgmna.
          MOVE : tadir-devclass TO v_devclass.
          IF sy-subrc NE 0.
            SELECT SINGLE * FROM trdir
               WHERE name = tstc-pgmna.
            IF trdir-subc EQ 'F'.
              SELECT SINGLE * FROM tfdir
                WHERE pname = tstc-pgmna.
              SELECT SINGLE * FROM enlfdir
                WHERE funcname = tfdir-funcname.
              SELECT SINGLE * FROM tadir
                WHERE pgmid    = 'R3TR'
                  AND object   = 'FUGR'
                  AND obj_name = enlfdir-area.
              MOVE : tadir-devclass TO v_devclass.
            ENDIF.
          ENDIF.
    Find SAP Modifactions
          SELECT * FROM tadir
            INTO TABLE jtab
            WHERE pgmid    = 'R3TR'
              AND object   = 'SMOD'
              AND devclass = v_devclass.
          SELECT SINGLE * FROM tstct
            WHERE sprsl EQ sy-langu
              AND tcode EQ p_tcode.
          FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
          WRITE:/(19) 'Transaction Code - ',
          20(20) p_tcode,
          45(50) tstct-ttext.
          SKIP.
          IF NOT jtab[] IS INITIAL.
            WRITE:/(95) sy-uline.
            FORMAT COLOR COL_HEADING INTENSIFIED ON.
            WRITE:/1 sy-vline,
            2 'Exit Name',
            21 sy-vline ,
            22 'Description',
            95 sy-vline.
            WRITE:/(95) sy-uline.
            LOOP AT jtab.
              SELECT SINGLE * FROM modsapt
              WHERE sprsl = sy-langu AND
              name = jtab-obj_name.
              FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
              WRITE:/1 sy-vline,
              2 jtab-obj_name HOTSPOT ON,
              21 sy-vline ,
              22 modsapt-modtext,
              95 sy-vline.
            ENDLOOP.
            WRITE:/(95) sy-uline.
            DESCRIBE TABLE jtab.
            SKIP.
            FORMAT COLOR COL_TOTAL INTENSIFIED ON.
            WRITE:/ 'No of Exits:' , sy-tfill.
          ELSE.
            FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
            WRITE:/(95) 'No User Exit exists'.
          ENDIF.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'Transaction Code Does Not Exist'.
        ENDIF.
    Take the user to SMOD for the Exit that was selected.
      AT LINE-SELECTION.
        GET CURSOR FIELD field1.
        CHECK field1(4) EQ 'JTAB'.
        SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
        CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

  • How to install or attach or add the plugins '.mnu and .vlx' to autocad 2012 or 2013 (mac version). In windows, its 'menuload' and express tools, that helps for it. But this command doesn't exist in mac version. so is there any other command or solution?

    How to install or attach or add the plugins '.mnu and .vlx' to autocad 2012 or 2013 (mac version). In windows, its 'menuload' and express tools, that helps for it. But this command doesn't exist in mac version. so is there any other command or solution?

    Please see autocad support at autodesk.com
    http://docs.autodesk.com/ACD/2014/ENU/index.html?url=files/GUID-5E50A846-C80B-4F FD-8DD3-C20B22098008.htm,topicNumber=d30e484012

  • How to find text or paragraph by giving style name?

    Hello,
    can any body tell me,How to find text or paragraph by giving style name?actully i have so many styles which is applied on document.
    i want to find text in the document which have particular style name.is any method to find text by giving name of style?

    Any of the various findText methods, plus your paragraph style name in FindTextPreferences: http://jongware.mit.edu/idcs5js/pc_FindTextPreference.html
    Use Google to locate exact samples, as this has been done countless times before.

  • How to find a routine with it's technical name

    Hello!
    I am wondering how to find a routine with it's technical name (e.g. "ROUT 7QAXE7SDXIVW4BJ2S2UL3HLAS" as shown in the error message in a transport log).
    So I would like to find out, where this routine is located (w.g. which characteristic/key figure in which transfer/update rule).
    Any ideas welcome. Thanks, Thomas

    Hi Thomas,
    You can try the following:
    Look up table <b>RSUPDROUT</b>with the GUID of your routine (like 7QAXE7SDXIVW4BJ2S2UL3HLAS)in the ABAP Code ID field selection. This will show you the InfoObject it is created on, and the GUID of the update rules. If you click on the Check Table button, you can find out the data target and InfoSource of the Update Rule.
    In table <b>RSAROUTT</b>you can again use the GUID of your routine to check the description assigned to the routine during its creation.
    I am not sure if this works for the routines of transfer rules....still checking it and will update if anything turns up.
    Hope this helps...

  • How do I create a dropdown in the Subject Line field while sending emails.

    How do I create a dropdown in the Subject Line field while sending emails as I send more than 300 emails with the same subject line everyday.

    Which webmail service do you use, gmail may have problems currently see thread
    '' Subject autofill feature stopped working in gmail for new subjects only - and I'm not the only one - help! {[https://support.mozilla.com/en-US/questions/793610 link]]''
    For general information see [[form autocomplete]] and [[Form autocomplete entries are not saved ]]

  • Problem when add the subject

    hi.. i'm trying to send email from a ASA Sybase database.. i register the class or the jar and call to the java method wrapper.. easy.. the problem is when adding the subject or the text of the email.. the proccess stuck there and don't send the mail.. but i try send outside the database from the main method and the mail is sended..
    which could be the problem?
    appreciate your help
    miguel

    i'm sure.. no exceptions.. i set to true the debug option in the session object and i log everywhere.. after all the statements.. and all are wrapped between a huge try/catch.. when i set the subject or the text the execution only stop and wait there like a infinite loop.. i say stop because the execution of the method don't log anymore.. the last tree statements of my send method is: add the subject, add the text and send the email via the Transport class.. the static method send.. when i comment the lines that add the subject and the text, the execution stuck when try to send the email without a subject and text.. is strange.. because i try outside the database and the email is sended.. i don't think that is a security problem.. is the same user that run the class and the same jvm..
    any ideas?
    thanks..

  • How to find Ledger, LE, Op units, Org(All) names and IDs ?????

    How to find Ledger, LE, Op units, Org(All) names and IDs ?????
    Regards:
    Shahzad M. Saleem

    Dear Rajen!!
    How can i link GL_SETS_OF_BOOKS  & XLE_ENTITY_PROFILES ??? as Gl Sets of books has ledger ID whereas XLE_ENTITY_PROFILES has legal entity id???
    I want All LE and all of there ledgers, units and orgs.
    Regards:
    Shahzad M. Saleem

  • How to find my own property file in a war in soloaris

    Hi, there;
    I have a question whcih bothers me quite long. I packaged a property file in a
    war file and use console to uploaded. I can access to the servlet through browser
    and the servlet reference another class which looks like
    try {
    InputStream is = getClass().getResourceAsStream "/data_ctrmw.properties");
    error +="InputStream property file 1nd try: "+is;
    if(is==null){
    is = getClass().getResourceAsStream("data_ctrmw.properties");
    System.err.println("data_ctrmw.properties found! ");
    error +=" InputStream property file 2nd try: "+is;
    Same code works on windows wls6.1, but not on soloris machine.
    One other question:
    How can I write out to a log file? I am unable to write out to a log file.
    Thanks a lot

    Sorry;
    Yesterday, I finally found that my web.xml had an error. I didn't define .properties
    as MIME extension type. I change property file type to .txt and put in MIME type.
    It works!
    Thanks
    "raymond" <[email protected]> wrote:
    >
    Hi, Chala;
    Thanks for your good suggestion. However, it seems still not working,
    I also tried
    getResourceAsStream("/") trying to find from app context root. By the
    way, in
    this function, the arg is
    String path, right now, I am just add the param-name element in web.xml
    for a
    specific servlet. But actuall, I want the properties to be exposed to
    the application.
    Also, I tried context-param element in web.xml, it even can't be uploaded
    to jrun
    or weblogic.
    I guess, it might be possible to warp it in an .ear file and put these
    in sth
    like application.xml
    Any suggestion?
    Thanks lot
    "Arjuna Chala" <[email protected]> wrote:
    Have you tried using
    ServletConfig.getServletContext().getResourceAsStream().
    "raymond" <[email protected]> wrote in message
    news:3c5f0b20$[email protected]..
    Hi, there;
    I have a question whcih bothers me quite long. I packaged a propertyfile
    in a
    war file and use console to uploaded. I can access to the servlet
    through
    browser
    and the servlet reference another class which looks like
    try {
    InputStream is = getClass().getResourceAsStream"/data_ctrmw.properties");
    error +="InputStream property file 1nd try: "+is;
    if(is==null){
    is = getClass().getResourceAsStream("data_ctrmw.properties");
    System.err.println("data_ctrmw.properties found! ");
    error +=" InputStream property file 2nd try: "+is;
    Same code works on windows wls6.1, but not on soloris machine.
    One other question:
    How can I write out to a log file? I am unable to write out to a logfile.
    Thanks a lot

Maybe you are looking for