How to find screen exits?

Hello,
I want to know the procedure to find out the Screen exits available for a particular Txcode? Please to know this Concept.
Thks

Hi,
Finding Screen Exit:
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'S' (for screen exit)
3. For that tcode, u should know the program name
or the CALLING SCREEN.
eg. SAPLLMOB
4. then type SAPLLMOB* and execute
For Further:
ERPGenie.COM -> SAP Technical -> ABAP -> Tips and Tricks -> SAP ABAP Field Exits
V4.6c onwards no longer supports field exits!!! In any case here's how to activate them:
Activation of the field exits and assignment of the dynpros is carried out using program RSMODPRF. For this purpose, the program must be started without parameters (input fields remain blank). If required, new field exits can be created using program RSMODPRF (see below for documentation).
Field Exits for Data Elements
Description
Maintenance transaction for creating and activating field exits
As part of the extension concept, SAP allows you to install a field exit for each screen field. Similar to the conversion exit, the system branches at the field exit at DCI (DATA COMMUNICATIONS INPUT) to a function module, if the field is an input field and a function code was triggered. The function module must adhere to the following naming convention:
Prefix: FIELD_EXIT_
Infix: <Data element name>
Suffix: _0 to _9 (optional), _A to _Z
The interface is automatically generated during the creation of the function module, and has 2 parameters:
Import parameter: INPUT
Export parameter: OUTPUT
After a function code has been triggered the contents of the field are made available to the FB via the "INPUT" import parameter. You can edit this and, when changed, make it available to the ABAP/4 processor in "OUTPUT". The input field contents are usually passed on: you can simply write OUTPUT = INPUT.
If, e.g., you have activated the field exit for the data element 'PROGRAM', then the fields of all the screens, which refer to the data element 'PROGRAM', branch to the function module FIELD_EXIT_PROGRAM. This includes the field 'Program' of the initial screen SAPMS38M0100 in transaction SE38, for example.
If you do not want the function module to be accessed from all screens, assign particular screens to the data element PROGRAM. By allocating an exit number, it is also possible to branch to other function modules with the corresponding suffix _0 ... _Z.
Example: You have assigned screen SAPMS38M0100 and exit number 5 to data element 'PROGRAM'. The corresponding field on SAPMS38M0100 branches to FIELD_EXIT_PROGRAMM_5.
As soon as you activate an exit, the corresponding screens are invalidated.
Note: Field exits are only taken into account during screen generation if the parameter abap/fieldexit = 'YES' is set in the system profile.
Requirement
Set the profile parameter abap/fieldexit = 'YES' before system start.
Limitations
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT,
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Note:
Field exits cannot be edited with the debugger.
You should not use any external Performs in field exits. The ABAP processor shares the table work areas of externally called programs with those of the first caller. This could lead to errors at field exits that can hardly be analyzed, as field exits are sometimes slipped into the flow of the program at unforeseen events.
Questions and answers on field exits
1. A field exit was created with the CMOD and activated, but it does not get executed when the screen is called.
Since the field exit is not executed until DCI, some action must occur in the screen (e.g. press Return, saving....).
Set the abap/fieldexit profile parameter to YES and start the system again.
After the FIELD_EXIT... function module has been activated and the field exit has been activated, the transaction in whose screen the field exit is to be executed must be terminated. The screen is not generated until it is called.
Do not work on different application servers, otherwise there may be a delay before the field exit becomes active.
The profile parameter must be set either on all application servers or on none.
If the field exit is to be active in certain screens only, then you should check whether you have selected the correct program and the correct screen number (Careful with SUBSCREENS Do not rely on the F1 information for the field!
2. How does setting abap/fieldexit affect the performance?
If a screen is generated and the profile parameter is set, then the system checks in 2 tables (TDDIR, TDDIRS) to see whether a field exit has to be generated for the field. In practice the screen load after a Put is not generated until the screen is called. The user will not experience a noticeable delay, since screen generation is extremely fast.
3. Can the contents of other screen fields be read in a field exit?
In principle all fields can be copied to global variables in the TOP or the function group. However, since the order in which the field exits are called is not guaranteed, this possibility should not be used.
4. How does the field exit work in step-loop fields?
After data input to DCI the field exit will be called as many times as fields are visible on the step-loop. The SY-STEPL system variable is incremented each time. If a new value is assigned to be field, then it will be visible in the module between LOOP. ENDLOOP. This module will also be called as many times as there are visible step-loop lines.
5. Can field exits be debugged?
No. Field exits have to be tested in isolation in the development environment. To analyze problems that occur only in the screen environment, the relevant variables can be written to the file system using TRANSFER... and can be analyzed there.
6. What should one do if the field contents are not getting transported to ABAP/4?
Check whether you have assigned a value to the OUTPUT field.
7. When does the field exit get called in the case that there is a conversion exit attached to the data element?
The field exit will be called after the conversion exit. This means that the INPUT field contains the data in the same form as that in which the ABAP/4 program also gets them.
Regrdas,
Shiva Kumar

Similar Messages

How To Find Screen Exit & Menu Exit

Hi Friends,
How can we find Screen Exit & Menu Exit?
Kindly do not specify the report which is prevailing all over.
And does class CL_EXITHANDLER also return exits apart from BADI names ?
Regards,
Pradeep

Hi,
Check this...it will help u to create menu exit...
Creating Customer-Specific Menus
Menu exits allow you to add your own functions to the pulldown menus in standard R/3 transactions. To take advantage of a menu exit, you first need to create a project as described in the section Creating an add-on project. Then, you must include the SAP enhancement package that contains the menu exit you want to use in your project. From the main screen of the Project management transaction, proceed as follows:
Select Enhancement components and choose Change.
The system lists all customer exits contained in the enhancements included in your project.
Place the cursor on the menu exit you want to add your own function to.
Choose Edit component.
The system displays technical information about the menu entry. It also displays two input fields where you can specify a language and the text you want your menu item to have.
Enter the name of your menu function (such as Special order method) in the field New text.
Choose Save text.
Your special menu function will not appear in the pulldown menu of the corresponding standard transaction until you activate your enhancement project.
Specifying a menu text and activating your project are not the only steps you need to take to make your own menu item work. After you carry out these steps, your menu item will appear, but it will not call a corresponding function. To attach your menu entry to its corresponding function, you need to create a function module for the function module exit associated with your menu text. This function module exit is part of the same SAP enhancement that contains the menu exit you used. Creating Customer-Specific Function Modules tells you more about how to use function module exits.
Procedure for Creating MENU Exits:
1) To get into Area Menu Maintenance Screen Type SE43 T.Code in Command
Line.
2) In Area Menu Paramenter type 'S000' (S triple Zero)
3) Then Press Change Icon in Application Tool Bar. Then It may ask for
Access Key [or] it may display "Specify Processing mode" window. If it ask
for the Access Key Check for the availability of OSS Note and apply to open
Standard SAP Menu to include MENU Exits. Otherwise, if it display "Specify
Processing mode" window with Three Push Button. In which select "Change" and
proceed further.
4) Then it will display "Information" window with the following information
"Caution : The Original Language of the structure is German (editing lang. :
English) ". Then press "Enter Key to proceed further.
5) Then you will get into "Edit Area Menu S000".
6) for eg:- Expand Tools Menu.
7) Then Press ABAP Workbench <Icon>.
8) Then you will get into ABAP Workbench Menu Tree.
9) Then Expand Utilities Menu.
10) In the last line you will find one MENU EXIT Provision to include your
own menu. "Node Text Not Found" This text can be change by double Clicking
that. There you can find the T.Code. Here for Eg:- "+DW4".
11) for eg: - Here change the Text to "Sample Menu Exit" and then note down
the T.Code "+DW4".
12) Then Save with Change Request Number and come out of Transaction SE43.
13) Then Goto Transaction SE93.
14) Then type T.Code "+DW4" and press Create.
15) Then proceed further to create transaction called "+DW4".
I hope this could help you in Creating Menu Exit...
screen exists
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Regards
Kiran Sure

How to find screen exit

Hi,
how i can find screen exit for a given transaction code.
plz provide me the steps.
Thanks,
kish

Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
1. Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
plz refer this (the same question asked here)
screen exit

How to find screen exit for a screen?

Hi,
If you know the transaction, how to find if there is a screen exit exists or not?
Here even I know the screen number also. I have opened it in screen painter. How can I see if there is a screen exit for the screen?
Thank you.

Hii
Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
1. Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
Screen exit
Regards
Naresh

How to find user exit for a perticular screen?

Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
Vj

User exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
        trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
      FORM get_data                                                 *
form get_data.
select single * from tstc
              where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
            where pgmid = 'R3TR'
              and object = 'PROG'
              and obj_name = tstc-pgmna.
if sy-subrc ne 0.
    select single * from trdir
             where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir
                     where pname = tstc-pgmna.
      select single * from enlfdir
                     where funcname = tfdir-funcname.
      select single * from tadir
                     where pgmid = 'R3TR'
                       and object = 'FUGR'
                       and obj_name eq enlfdir-area.
    endif.
endif.
select * from tadir into table jtab
             where pgmid = 'R3TR'
               and object = 'SMOD'
               and devclass = tadir-devclass.
select single * from tstct
          where sprsl eq sy-langu
            and tcode eq p_tcode.
endform.
      FORM write_list                                               *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey

Issue with Method to find Screen Exit

Hi all,
I am planning to add 2 custom fields to item details tab in ME51N .
I tried to find screen exits using development class of ME51N i.e ME
I went to smod and tried to find enhancements using ME development class and from the list of enhancements i tried to find a screen exit but i could found one.
I found an enhancement
MEREQ001   Customers' Own Data in Purchase Requisition
Which had a screen exit as well and this is what i was exactly looking for.
But my question is that
MEREQ001 is under development class MEREQ
So that means the way i was trying to find the screen exits is wrong or is there a better way to find screen exits
Let me know
Thanks

Hi,
U will find that if u try this program.
How to Find a Screen Exit in a Given SAP Standard T-code
Program
REPORT YSMOD2 .
TABLES: MODSAP, MODACT, TSTC.
PARAMETERS: INPUT1 LIKE TSTC-TCODE DEFAULT ' ',
            INPUT2 LIKE MODSAP-TYP DEFAULT ' '.
DATA: SEARCH1(6),
      SEARCH2(3),
      SEARCH3 LIKE MODSAP-MEMBER.
DATA : FIRST_ROW VALUE 'Y'.
CONCATENATE: '%' INPUT1 '%' INTO SEARCH1,
'%' INPUT2 INTO SEARCH2.
SELECT * FROM TSTC WHERE TCODE LIKE SEARCH1.
FIRST_ROW = 'Y'.
CHECK TSTC-PGMNA NE SPACE.
CONCATENATE '%' TSTC-PGMNA '%' INTO SEARCH3.
SELECT * FROM MODSAP WHERE TYP LIKE SEARCH2
AND MEMBER LIKE SEARCH3.
SELECT SINGLE * FROM MODACT WHERE MEMBER = MODSAP-NAME.
IF FIRST_ROW EQ 'Y'.
   WRITE: /0 TSTC-TCODE, 6 TSTC-PGMNA, 16 MODSAP-NAME, 32 MODSAP-TYP,
          45 MODSAP-MEMBER, 70 MODACT-NAME.
   FIRST_ROW = 'N'.
ELSE.
   WRITE: /16 MODSAP-NAME, 32 MODSAP-TYP, 45 MODSAP-MEMBER, 70 MODACT-NAME.
ENDIF.
CLEAR : MODSAP, MODACT.
ENDSELECT.
IF SY-SUBRC NE 0.
   WRITE : /0 TSTC-TCODE, 6 TSTC-PGMNA, 30 'No exits found'.
ENDIF.
CLEAR TSTC.
ENDSELECT.
END-OF-SELECTION.
CLEAR: SEARCH1, SEARCH2, SEARCH3.
End
Regards,
Jagadish

How to find user exit implemented in the program

how to find user exit implemented in the program or standerd transaction

try this program to get the list of all the user exits for a transaction...
*& Report Z_USER_EXIT                                                 *
*REPORT Z_USER_EXIT                             .
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
           tadir,    "Directory of Repository Objects
           modsapt, "SAP Enhancements - Short Texts
           modact,   "Modifications
           trdir,    "System table TRDIR
           tfdir,    "Function Module
           enlfdir, "Additional Attributes for Function Modules
           tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
    SELECT SINGLE * FROM tstc
      WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM tadir
         WHERE pgmid    = 'R3TR'
           AND object   = 'PROG'
           AND obj_name = tstc-pgmna.
      MOVE : tadir-devclass TO v_devclass.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM trdir
           WHERE name = tstc-pgmna.
        IF trdir-subc EQ 'F'.
          SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
          SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
          SELECT SINGLE * FROM tadir
            WHERE pgmid    = 'R3TR'
              AND object   = 'FUGR'
              AND obj_name = enlfdir-area.
          MOVE : tadir-devclass TO v_devclass.
        ENDIF.
      ENDIF.
Find SAP Modifactions
      SELECT * FROM tadir
        INTO TABLE jtab
        WHERE pgmid    = 'R3TR'
          AND object   = 'SMOD'
          AND devclass = v_devclass.
      SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
          AND tcode EQ p_tcode.
      FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
      WRITE:/(19) 'Transaction Code - ',
      20(20) p_tcode,
      45(50) tstct-ttext.
      SKIP.
      IF NOT jtab[] IS INITIAL.
        WRITE:/(95) sy-uline.
        FORMAT COLOR COL_HEADING INTENSIFIED ON.
        WRITE:/1 sy-vline,
        2 'Exit Name',
        21 sy-vline ,
        22 'Description',
        95 sy-vline.
        WRITE:/(95) sy-uline.
        LOOP AT jtab.
          SELECT SINGLE * FROM modsapt
          WHERE sprsl = sy-langu AND
          name = jtab-obj_name.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WRITE:/1 sy-vline,
          2 jtab-obj_name HOTSPOT ON,
          21 sy-vline ,
          22 modsapt-modtext,
          95 sy-vline.
        ENDLOOP.
        WRITE:/(95) sy-uline.
        DESCRIBE TABLE jtab.
        SKIP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/ 'No of Exits:' , sy-tfill.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'No User Exit exists'.
      ENDIF.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

How to find CUSTOMER EXIT for a Standard SAP program

How to find CUSTOMER EXIT for a Standard SAP program

Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

How to find user exit in SPRO

Hi experts,
how to find user exit in spro.
the path is in spro.
in spro->financial accounting>travel managment>travel expenses>transfer to accounting-->
define assigment of wage type to symbolic account.
when u click on this it will ask for trip provision variant if we key in the work area number thne we get a screen . in that wage test key start date end date so on... are there so in the field KEY its empty so i want to find a user exit.can u please help me in this.
regards,
sunita.

Hi,
For more information on user exit,
use the following link.
Hope it is useful.
http://****************/Tutorials/ExitsBADIs/ExitsMain.htm
Regards,
Phani.

How to find User Exits/ Enhancments/ BADI's for T-code CJ20N

Hi All,
In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
Regards
Jaker.

Hi,
Check the following , this might help,
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Kiran Sure

How to find USER-EXIT for tcode - F110

I am new in USER-EXIT Please help   how to find USER-EXIT for F110
ASAP

Hi,
Enhancement/ Business Add-in            Description
Enhancement
RFFOX074                                Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075                                Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081                                Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082                                Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100                                Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101                                Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102                                Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103                                Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104                                user exit
RFFOX105                                Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200                                Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210                                Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211                                Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230                                General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240                                Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250                                Enhancement for User Exit 250 (RFFODK_E)
RFFOX901                                Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902                                Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001                                Enhancement to Transaction FDTA (event after the download)
FEDI0002                                Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003                                Function exits for EDI docs in FI - Save PEXR segments
FEDI0004                                Function exits for EDI docs in FI - particular events
FEDI0006                                Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003                                Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041                                Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042                                Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043                                Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061                                Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062                                Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063                                Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064                                Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065                                Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066                                Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071                                Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072                                Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073                                Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT                         FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB                    F110: Check before scheduling a proposal/update run
No.of Exits:         36
No.of BADis:          2
Arunima

How to find *screen badi*

hi,
i know how to find exits and badi for a particular transaction.
i just wanted to know how we can find screen badi for a specific transaction.(ex: mb_migo_badi for migo transaction)
can any one give suggestions in this issue.if possible send any documentation.
note:plz dont send the same old program to find exits and badis.

See point 8
Procedure
       1.      Start the Object Navigator (SE80).
       2.      Open an enhancement spot. For more information, see Creating, Editing, and Deleting Enhancement Spots.
       3.      Select the Enh. Spot Element Definitions tab page.
       4.      Choose Create BAdI.
A dialog box appears.
       5.      Enter a name and a short text for the BAdI.
BAdIs are in the same namespace as global data types from the ABAP Dictionary, global classes, or interfaces. For BAdIs, we recommend using the prefix u201CBADI_u201D (or u201CZBADI_u201D, and so on, in the customer namespace).
The new BAdI appears as a node in the tree display of the tab page.
       6.      On the right-hand side of the page, do the following:
                            a.      Enter the attribute for multiple use.
                            b.      Enter the instance creation mode.
                            c.      Enter the attribute for internal SAP BAdIs (only SAP internal use).
                            d.      Optional: Enter a Fallback Class.
                            e.      In the tree, expand the BAdI and choose the Interface node. Enter the name of an existing BAdI.
       7.      Optional: Choose the function Create Filter to create a filter.
Here you can:
                            a.      Enter the filter name, filter type, and description.
                            b.      Optional: If you choose Constant Filter Value During Call, you may only specify a constant value at the respective filter when using GET BADI. This is provided for future performance improvements of the statement.
                            c.      Optional: Enter either a data element or a domain with fixed values, or a search help. Alternatively, enter a check or input help class, and a length (together with decimal places). In this way, the filter values specified at GET BADIcan be checked during the BAdI implementation.
       8.      Optional: Choose the function Create Screen Enhancement in order to create the BAdI as a screen enhancement.
The BAdI must not be of a multiple use type.
                            a.      Enter Calling Program, Screen Number, Subscreen Area, and Description.
                            b.      Optional: Select Default Value to specify a screen of a program that is used if no active implementation is found at runtime.
       9.      Optional: Choose Create Function Code Enhancement to create the BAdI as a function code enhancement.
The BAdI must not have any filters and must not be of the type for multiple use.
                            a.      Enter Program, Function Code, and Description.
                            b.      Optional: Select Default Value to specify an icon, a menu text, a pushbutton text, and a quick info, all of which are used when no active implementation is found at runtime.
   10.      Optional: Create an example implementation.
                            a.      Select the BAdI, and choose Create Example Class from the context menu.
                            b.      Enter the name of a BAdI implementation class and a description.

How to find conversion exit MATN1 for the field MATNR

Hi Friends !
I want to run the infopackage with selection on material. But when put some value in the infopackage selection screen, it says "cannot find conversion exit MATN1 for the field MATNR".
Ques is how to find where this conversion exit is written? Will it be written in ECC side or BI side?
Source System Datasource : 0MAT_SALES_ATTR
InfoObject in BI : 0MAT_SALES
With Regards
Rekha

HI ,
It will be available in the BI system itself as FM , you can find them in TCODE : SE37 --> provide the converstion exit name
with star on both sides like MATN1 and press F4 key , every convertion exit will have two FM s , one for INPUT and
one for OUT put , you can try the Test Run ofFM to check how it works
For MATN1
CONVERSION_EXIT_MATN1_INPUT
CONVERSION_EXIT_MATN1_OUTPUT
Regards,
Sathya

How to find user-exit?

Hi Friends i have got a requirement of adding new fields in MM01 screen i am trying but i have stricted up in user-exits like i got know tht i have to use EXIT_SAPLMGMU_001 but i am unable to find the user-exit can anyone tell me the procedure how to view and edit the user-exits.
Thks in Advance

You can find the exits in many ways.
Get the developement class of the transaction code from SE93.
Then go to transaction SMOD and press F4 and give the Development class in Press ENTER, then it will show all the exits available for that transaction.
Or
Go to transaction SE80 and give the development class name and then expand the enhancements tree view then you will get the list of userexits for that corresponding dev class.
Thanks,
Srinivas

How to find user exit for the transaction PBAW

Dear Freinds
In Recruitment ....PBAW(Job Advertisements--when we execute the
transaction PBAW ...we can find create Advertisement... > here will create posting
in this screen i have to add a field Status . could you please let me know how
i can add.. Is there any user exit through which i can add a field or there is any way...
as it is standard..
regards
Vamsi.

Hello Vamsi,
This might be of help. It is a program to find user exits based on transaction codes. Just install it on your sandbox and see if it works for you.
http://www.erpgenie.com/abap/code/abap26.htm
KR,
Peter Linn

How to find screen exits?

Similar Messages

Maybe you are looking for