How to find tcode of  a logical link id attached to a transaction launcher

dear all ,
In crm 2007 we have used transaction launcher to call transactions of is utilities system .
i can see the transaction logical link ids in SPRO but how to find the transaction associated with this logical id .
Thanks & Regards

hi Anit,
goto->Customer Relationship Management->UI Framework->Technical Role Definition->Define Navigation Bar Profile
Open your logical link. Check parameter of your logical link. Suppose it is zxyz.
then goto
Customer Relationship Management->UI Framework->Technical Role Definition->Transaction Launcher->Copy/Delete Launch Transactions
Goto Launch Transactions select your tx and open Import Parameters. Check parameter field. you will find the required information.
Good Luck.
Pankaj Kumar

Similar Messages

  • How to find out the RasterItem(embedded) links name?

    How to find out the RasterItem(embedded) links name which appeared in Links menu(Window->Links) via scripting for illustrator cs3. Please advise me the possibilities.
    Thanks for looking into this.

    Thanks for your support. From your code i got the filename(embedded) with pathname(if the embedded image in that location). If the embedded image not in that location at that time it throws error message. Is it possible to find out the name of the embedded image, if the corresponding image not in that location. Kindly advise me the possiblitities.
    Thanks for looking into this.

  • How to find out web content files linked in folio through scripting

    Hi all,
    Please suggest me, how to find out web content files linked in folio through scripting.
    Regards,
    Moorthy

    @Moorthy – can you tell us a bit more? By mentioning "folio", I think you are referring to Adobe Digitial Publishing Suite (ADPS or short: DPS). If yes:
    1. Do you want to analyze Folio files *.folio and get the linked web content files?
    2. Or do you want to check an InDesign file with an overlay and check what files are linked as web content?
    3. Or something else?
    Where is your base problem?
    Packaging the InDesign files and copy/relinking the web content files after the packaging process?
    Uwe

  • How to find Tcodes related to a particular user

    How to find Tcodes related to a particular user

    >
    P734000 wrote:
    > do we have any table to check the tcodes which were created by a particular user.
    Hello,
    I donot think SAP maintains this info
    @Max: I think t-code you gave is the same when i use SUIM --> TRxns --> "Executable for User"
    BR,
    Suhas

  • How to find TCodes for Config Transactions

    Hi All,
    How do I find the TCode for a Config Activitity node?
    For example.
    OX09 is for "Maintain Storage Location"
    OB52 is for FI Period closing/opening
    I know these from google search, but how do find tcodes for other IMG activity nodes?
    Thanks in advance!

    Go to SPRO and in Menu Additional Information Click Display key and IMG activity then Sytem will show the SPRO Transaction along with path
    Else Go to Particular Node say Create Purchasing Group and Right Click on Node and Select Display Technical Info and in ID tab the Last four Charecters wud be the Trxn code.
    In SPRO-IMG screen Only Few Nodes will Show  / have the Transaction codes.

  • How to find tcode from SPRO

    Hi All,
    Can you please help me know how to find tcode for a configuartion setting in SPRO.
    Thanks in advance.

    Hi,
    Try this..
    This may work also..
    IF you know the table name..Or the corresponding view name..
    Go to the table TSTCP...
    IN the parameter field give table name OR view name..
    Press F8..It might show the transaction code for the corresponding table..
    Thanks
    Naren

  • How to find Tcodes available in BW system

    HI to All,
    Pls can anybody tell me how to find the available Tcodes in  BW(either production or quality).Whats the procedure to find the existing Tcodes in the system.
    Regards,
    MSM.

    Hi MSM,
    You can check all transaction here..
    http://www.easymarketplace.de/transactions.php
    http://www.sap-img.com/general/find-the-list-of-sap-transaction-codes.htm
    check this link for list.
    http://www.sapdevelopment.co.uk/tcodes/tcodes.htm
    just refer the following link :
    http://allsaplinks.com/transactioncodes.html
    Listed here are the various ways you can find the list of transaction codes and their usage:
    Use transaction SE11 - ABAP Dictionary:
    Fill in the Database table name and click the Display button.
    - TSTC table will contain all the Tcodes and
    - TSTCT table will contain all the Tcodes with Texts.
    Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
    If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
    or
    Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
    or
    Goto transaction SE93
    There are two ways where you can find the list of transaction codes in SE93.
    Method 1:
    You must be familiar with the starting characters strings for each of the R/3 application modules.
    Assuming you know that most Materials Management transaction codes start with MM.
    In the Fields: Transaction code, type in MM* and press the function key F4
    The list of transaction code starting with MM will be displayed.
    Method 2:
    On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
    If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
    I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
    Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
    check previous posting
    Transaction Codes for BW Developers
    SAP BW n R/3 transactions.
    table TSTCT contains all the transaction codes
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSDBC DB connect
    RSDDV Maintaining Aggregates
    RSIMPCUR Load Exchange Rates from File
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLGMP Maintain RSLOGSYSMAP
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSRCACHE OLAP: Cache Monitor
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    SE03 Transport Organizer Tools
    SE06 Set Up Transport Organizer
    SE07 CTS Status Display
    SE09 Transport Organizer
    SE10 Transport Organizer
    SE11 ABAP Dictionary
    SE24 Class Builder
    SE80 Object Navigator
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV*
    RSSM Authorizations for Reporting
    SM04 User List
    SM12 Display and Delete Locks
    SM21 Online System Log Analysis
    SM37 Overview of job selection
    SM50 Work Process Overview
    SM51 List of SAP Systems
    SM58 Asynchronous RFC Error Log
    SM59 RFC Destinations (Display/Maintain)
    LISTCUBE List viewer for InfoCubes
    LISTSCHEMA Show InfoCube schema
    DB02 Tables and Indexes Monitor
    DB14 Display DBA Operation Logs
    DB16 Display DB Check Results
    DB20 Update DB Statistics
    r/3 (bw related)
    SBIW BIW in IMG for OLTP
    BD61 Activate Change Pointers - Generally
    BDLS Convert Logical System Names
    BF11 Application Areas
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSO2 Oltp Metadata Repository
    RSO3 Set Up Deltas for Master Data
    LO setup table
    OLI1BW INVCO Stat. Setup: Material Movemts
    OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
    OLI3BW Reorg.PURCHIS BW Extract Structures
    OLI4BW Reorg. PPIS Extract Structures
    OLI7BW Reorg. of VIS Extr. Struct.: Order
    OLI8BW Reorg. VIS Extr. Str.: Delivery
    OLI9BW Reorg. VIS Extr. Str.: Invoices
    OLIABW Setup: BW agency business
    OLIFBW Reorg. Rep. Manuf. Extr. Structs
    OLIIBW Reorg. of PM Info System for BW
    OLIQBW QM Infosystem Reorganization for BW
    OLISBW Reorg. of CS Info System for BW
    OLIZBW INVCO Setup: Invoice Verification
    Check out AHP's reply specifically in the link:
    urgent
    Hope this helps.
    Regards,
    Ravikanth.

  • How to find out selected AssignedStory or Link?

    Hello to all,
    can anyone pls. explain how to find out which assigned story or link is selected at the time the script is fired.
    My problem is this: I would like to place an image into selected rectangle which is exported into .icml. So, for example, you have few exported rectangles and you would like to place an image into the one which is selected (through link or assignment panel). Because you can not select a rectangle in InCopy like you can in InDesign I tried to take a look through assigned stories...
                       For aCounter As Integer = 1 To myDocument.Assignments.Count
                            Dim myAssignment As InCopy.Assignment = myDocument.Assignments.Item(aCounter)
                            For sCounter As Integer = 1 To myAssignment.AssignedStories.Count
                                Dim myAssignedStory As InCopy.AssignedStory = myAssignment.AssignedStories.Item(sCounter)
                                Dim myStoryRef As Object = myAssignedStory.StoryReference
                                find out if assigned story or story reference is selected
                                'Rectangle
                                If TypeName(myStoryRef) = "Rectangle" Then
                                    Dim myObjectRectangle As InCopy.Rectangle = myStoryRef
                                    If myObjectRectangle.Graphics.Count = 0 And myObjectRectangle.Images.Count = 0 Then
                                        'CheckOut if needed
                                        'Place Media
                                    End If
                                End If
                            Next
                        Next
    Kind regards,
    Marko

    Well,
    I couldn't solve this without using a placeholder image. I found that you need to check if the selection is an image and than replace that image... So something like this below:
                    'Check if there is a selected image for relink
                    If myDocument.Selection.Count = 1 Then
                        If TypeName(myDocument.Selection.Item(1)) = "Image" Then
                            myImage = myDocument.Selection.Item(1)
                            myImageLink = myImage.ItemLink
                            Dim msgRet As MsgBoxResult = MsgBox("Would you like to relink selected image?", MsgBoxStyle.YesNoCancel, "Relink seleceted image?")
                            If msgRet = MsgBoxResult.Yes Then
                                        ' DO some action
                                        Dim MediaLink As String = something...
                                                'CheckOut action
                                                If myCheckOutMenu.AssociatedMenuAction.Enabled() Then
                                                    myCheckOutMenu.AssociatedMenuAction.Invoke()
                                                End If
                                                myImageLink.Relink(fileLink)
                                                Try
                                                    myImageLink.Update()
                                                Catch
                                                End Try
    Hope this helps.
    Regards,
    Marko

  • HOW TO FIND INFOTYPES  OF  A LOGICAL DATA BASE

    Hi all,
    Can u help me
    1) how to find the infotypes , if i know the logical database in ABAP-HR.
    2 )If i know the infotype , then how to find the logical database ?
    Thanks in advace
    Ravi

    Hi ravichanran,
    1. ldb like pnp and pnpce
       support all infotypes.
    2. there is no such concpet like
       limited infotypes for that particular ldb.
    regards,
    amit m.

  • How to find DMS documents without object links in ABAP?

    How can I find DMS documents without object links,  in ABAP language?
    thank you

    Hi,
    this functionality is not available as on till date with sap dms and it's current version.
    Hope this will help.
    Regards,
    Ravindra

  • How to find tcodes-users

    how to find the t codes executable for user .
    by giving a  Tcode (example mm01), i want to know list of the users having access to MM01. is there any report / table when i can down load .
    ( not finding the list t codes for a particular user by giving the user name , if i give the t code it should display the list of users who ever has the accesses to that particular t code )
    thanks
    rani

    HI Rani,
    Follow the following steps.
    1. Goto SUIM
    2. Where used list ---> Authorization values ---> In users
    3.  enter authorizaation Object = s_tcode
    4.  click on Entry Values
    5.  type MM01 and click on Execute button ( F8 )
    You will get the desired result.
    <b>Please Confirm if solved</b>.
    Cheers.
    --Shamish

  • How to find tcode wise user

    HI all
    HOW to find t_code wise user ?
    and uses wise t_code ?

    Hi ..Sachin
    If u need to find, what all the transcations will be Executed for the particluar user means.. Goto Tcode SUIM.
    In that Expand the TRANSACTIONS TREE.
    And execute the .. EXECUTABLE FOR USER.
    And give the user name..
    Now u may able to know what transactions will be executed for the particular user.
    If any queries Means Reply me.
    Hope it will helps.
    Regards
    Bala..

  • How to find Tcode

    hi all
    my search criteria is t_code
    i want to find how many user have the right  for same.
    sachin

    hi,
    When initiating a transaction, a system program performs a series of checks to ensure the user is authorized.
    1. The program checks whether the transaction code exists in table TSTC.
    2. The program checks whether the transaction code is locked by the administrator (transaction code SM01).
    3. The program checks whether the user has the authority to start the transaction. Authorization object S_TCODE (transaction start) contains the authorization field TCD (transaction code). The user must have the appropriate authorization for the transaction code to be started (for example, FK01, Create Vendor).
    4. The program checks whether an authorization object is assigned to the transaction code. If this is the case, the program checks whether the user has an authorization for this authorization object. The transaction code/authorization object assignment is stored in table TSTCA.
    Note: An SAP program controls steps 1 through 4. It displays an automatic message to the user if an authorization attempt fails in the step.
    5. The system performs authorization checks in the ABAP program using the ABAP statement AUTHORITY-CHECK.
    Regards
    Sudheer

  • How to find out the 'z' user exit used in a Particular Transaction

    Hi,
    I have requirement to analyse all the user exits used in a transaction say 'VA01' . How can i find the user exits in a VA01 transaction. Can anyone suggest how to find the User exits
    Thanks in Anticipation.
    With Best Regards
    mamatha

    you can execute the following program , give the transaction name and execute
    *& Report  YCHATEST                                                    *
    REPORT z_find_userexit NO STANDARD PAGE HEADING.
    *&  Enter the transaction code that you want to search through in order
    *&  to find which Standard SAP User Exits exists.
    *& Tables
    TABLES : tstc,     "SAP Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    * Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    * Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
    * Find SAP Modifactions
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    * Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

  • How to find out the tables that will be affected using a transaction

    Hi,
    How to find out the list of database tables that will be affected when we use a standard transaction(ex. VA01, MM01..)...?(like When we create a salesorder, which tables and which fields will be affected..?)
    Is there any transaction or a simple way to find out the solution?
    Thanks,
    Pradeep.

    Hi,
    Give transaction code and in menu(system- status),  double click onthe Program name.
    Check in TOP INCLUDE - you will find all the tables related to that transaction.
    Thanks,
    Anitha

Maybe you are looking for