How to find the last run date of the report..

please any one one help me
how to find last run date of the report...
for example if my report is zgrir...if i am exuted in last week
if want to find when it executed
last run date is req
please any one help me...

The trasaction stat is limited because i want all the execution date even if it is 3 years ago.
I have tryied the transaction st03 but it is limited to 3 months ago.
check transaction STAT and it's report RSSTAT00.
U can copy RSSTAT00 into ZRSSTAT00 and modify corresponding.
*& Report ZDSAP *
REPORT ZDSAP .
DATA: d_ref TYPE REF TO data,
d_ref2 TYPE REF TO data ,
i_alv_cat TYPE TABLE OF lvc_s_fcat,
ls_alv_cat LIKE LINE OF i_alv_cat.
TYPES tabname LIKE dcobjdef-name .
parameter: p_tablen type tabname.
data: begin of itab occurs 0.
INCLUDE STRUCTURE dntab.
data: end of itab.
FIELD-SYMBOLS : <F_FS> TYPE table,
<F_FS1> TYPE TABLE,
<F_FS2> TYPE ANY,
<F_FS3> TYPE TABLE.
REFRESH itab.
CALL FUNCTION 'NAMETAB_GET'
EXPORTING
langu = sy-langu
tabname = p_tablen
TABLES
nametab = itab
EXCEPTIONS
no_texts_found = 1.
LOOP AT itab .
ls_alv_cat-fieldname = itab-fieldname.
ls_alv_cat-ref_table = p_tablen.
ls_alv_cat-ref_field = itab-fieldname.
APPEND ls_alv_cat TO i_alv_cat.
ENDLOOP.
internal table build
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = i_alv_cat
IMPORTING ep_table = d_ref .
ASSIGN d_ref->* TO <F_FS>.
SELECT * FROM (p_tablen) INTO CORRESPONDING FIELDS OF TABLE <F_FS>.
LOOP AT <F_FS> ASSIGNING <F_FS2>.
*your code goes here.
ENDLOOP.

Similar Messages

How to get the last run date.

We intend to develop an incremental data load mapping using this strategy:
1) The mapping reads the date it was last run from an auxiliary table.
2) It selects from the source only those rows that were inserted or updated after said date.
3) Then, a post-mapping process updates the last run date in the auxiliary table, using SYSDATE.
The problem with this logic is that there is a gap: if the mapping starts running at 1:00 and ends at 2:00, the rows that are inserted in between will never be loaded.
Is there any way to get the value when the mapping started running? Is there a better way to do this?
Any help would be appreciated.
Juan Algaba

There is always the possibility of some record updates slipping through the crack if you are depending on dates unless you are very carefull. All of the audit tasks that the OWB-generate code performes take time. Any pre- or post- process that needs to run takes time. So which date is the best cuttoff point to equate to "when the last run of the merge (or insert or update) statement completed"?
Plus, how do you handle reloads if the previous load failed and your mapping had incremental commits?
Is your source on another server? If so, are the dates in perfect synch? The audit tables populate with sysdate of your runtime schema. Is that the same as the sysdate on your source remote database?
I would qualify my query to look for all updates since the start of the last run that finished successfully - adjusted if neccesary for sysdate differences if it is on a remote schema. And make sure that your code handles any reloads gracefully in the event that this brings back data that you have already loaded once. .
Because we use Oracle Streams to load a local staging area, we also have custom code to dump the primary keys of all data changes to utility staging tables while streams is updating the local copy. So, our Person table has an st_Person_delta table that just holds the primary keys that have been updated by Streams since the last ETL run.
During datamart load we disable the streams apply to stabilize our environment, and join these lists of pk's to their source tables to drive our ETL. So we only select data where Streams has performed an update to the row since our last run. When we are done our ETL, we truncate the primary key staging tables, and then turn streams back on to start loading up our new delta into our staging tables again..
The ETL gets pretty complex though when many tables join together in one mapping and you need to check all possible source table deltas to see if any of them got updated to determine the delta for a given dimension or fact record, but it works great once you get it all done.

Help find the Last run date from previous month

Hi all
I am stuck trying to find the Last Run Date from the previous month.
select distinct(date_ran) from TABLE X where date_ran like '%/11-%' order by date_ran desc gives
"03/30/11-06:19
"03/25/11-03:01
"03/24/11-03:00
"03/23/11-03:00
"03/22/11-03:00
"03/21/11-03:00
"03/18/11-03:00
"03/17/11-00:00
"03/16/11-06:31
"02/15/11-07:42
"02/15/11-06:00
"02/14/11-08:19
Here the result I am trying to acheive is 02/15/11-07:42 ;Note the column date_ran is a VARCHAR2(255) and not a TIMESTAMP
I tried
select ADD_MONTHS(to_date(max(date_ran), 'MM/DD/YYYY-HH24:MI'),-1)
from daily_tests_a
where date_ran like '%/11-%'
order by date_ran desc
which returns 2/28/0011 6:19:00 AM and that is not the result I am looking for
Regards
SMK

Welcome to the forum!
user2931503 wrote:
Hi all
I am stuck trying to find the Last Run Date from the previous month.
select distinct(date_ran) from TABLE X where date_ran like '%/11-%' order by date_ran desc gives
"03/30/11-06:19
"03/25/11-03:01
"03/24/11-03:00
"03/23/11-03:00
"03/22/11-03:00
"03/21/11-03:00
"03/18/11-03:00
"03/17/11-00:00
"03/16/11-06:31
"02/15/11-07:42
"02/15/11-06:00
"02/14/11-08:19
Here the result I am trying to acheive is 02/15/11-07:42 ;Note the column date_ran is a VARCHAR2(255) and not a TIMESTAMPThat's a very bad idea. Points in time should always be stored in DATE (or maybe TIMESTAMP) columns. If not, you're going to waste resources converting them to DATEs whenever you need them to behave like DATEs, and risk run-time errors because of bad data.
Normally, the "previous" month means the month before the current month. In April, the previous month is March.
By "previous" month, do you mean the 2nd latest month in the table? That is, this data contains data from February and March, 2011; March 2011 is the latest of those months, February 2011 is the next-to-last, and so is that why you want a date from February?
I tried
select ADD_MONTHS(to_date(max(date_ran), 'MM/DD/YYYY-HH24:MI'),-1)
from daily_tests_a
where date_ran like '%/11-%'
order by date_ran desc
which returns 2/28/0011 6:19:00 AM and that is not the result I am looking for
Regards
SMKTry this:
WITH   got_real_date   AS
     SELECT     TO_DATE ( SUBSTR (date_ran, 1, 14)
               , 'MM/DD/RR-HH24:MI'
               )     AS real_date
     FROM     table_x
--     WHERE     ...     -- If you need any filtering, put it here
SELECT     TO_CHAR ( MAX (real_date)
          , 'MM/DD/RR-HH24:MI'
          )     AS last_date
FROM    got_month_num
WHERE     real_date     < (
                           SELECT TRUNC (MAX (real_date), 'MONTH')
                     FROM    got_real_date
;Edited by: Frank Kulash on Apr 5, 2011 3:59 PM

How to get the last run date of an ISchedulerTask ?

Hello,
I have implemented an ISchedulerTask and inside the run method I would like to get a reference to the last timestamp/date that the task was running, any idea how to achieve that?
Rgds,
Roy

Hi
You can create a custom metadata property and set this property with the date when the Ischedlar task runs.
So, in your code you can read this property whenever you want to read the previous date.
Hope this works.
Thanks
Puneet

How to find out last update date for business partner's marketing attribute

How to find out last update date for business partner's marketing attribute??
Im freshie for SAP Application and im assigned to find out last update date for marketing attribute changed
which table is involved??
Yours kindness will be appreciated
thanks

You can take a look at table AUSP as well as CRMD_AUSP_HIST.
The "changed by" and "changed at" are logged on attribute level, not on attribute value level. When you change one specific value, the system does a "re-insert" of all existing values of this attribute.
Take a look at the SAP notes 938426 and 966670 these may assit you in resolving the issue.
Regards,
William Laverde

How can I show the last amend date of the .rpt file on my report?

I want to show the last amendment date of the .rpt file on my report.
Modification date and time refer to the actual report rather than the .rpt file.
Does anyone have any suggestions? I am using version 11.2.
Thanks,
Anne-Marie

annemarier,
Have you tried the "Modification Date" or "Modification Time" fields located under the Special Fields section of the Field Explorer?
I've never used them, but they seem like good candidates.
Jason

Getting the last modified date of the contact in addressbook

Hi all,
Is there any way to get the last modified date and created date of the contacts stored in address book . I have gone through the api docs and could nt find any api's to get the modified date of the particular contact .
Any help would be greatly appreciated ..
Regards,
Mohammed Sadiq.

Hi,
Is the above feauture available in AddressBook fraamework ?
Best Regards,
Mohammed Sadiq

How to get last login date of the user

Hi,
I have an application where i need the last login date of the user and if the differance between the last login date and the system date is greater than a certain range the user account should be locked automatically.Please suggest me how resolve the problem as early as possible.
Thanks and Regards
Aniruddha

Hi,
We have faced the same issue earlier. Some attributes are available in SAP API, but they are depricated by sap due to some performance issue.
Below solution will be helpful:
So we have implmented custom code in our application. We have developed one webdynpro application which will retrieve update & retrieve logon time from portal database(custom table). And we have integrated this application in desktop inner page. So this application will be invisible to the user and will executed first time when user logs into the portal.
Regards,
Charan

How can I get the File Creation Date OR Last modification date of the incoming file in my message?

I need the Last Modification Date and the File creation date of the consumed file in my message, is it possible to do that using a custom pipeline component in decode stage or any other way? The FILE namespace have File creation time that actually gives
the time the file was dropped in receive location, not the actual creation time. Also this namespace doesn't have the Last Modification Date.

Yes,
As per MSDN, "File.FileCreationTime" - "Defines the time that the file was written to the folder that is monitored by the File receive
adapter."
So for File Modified DateTime, only option I can think of is create a custom file adapter (updating the File Adapter code from SDK ..\SDK\Samples\AdaptersDevelopment\File Adapter) and access the received file with the code something like the following, which
you give you the Last Modified date
string sLastModifiedDate = File.GetLastWriteTime(path).ToString();
If there are any business requirements which drives you this, then this the only way I can think of. Because you can access the file properties only in adapter, when it passes through adapter file is handled as stream and you will only have context properties
to access the file related properties.
If you're looking for implement this for any audit purpose or for your any technical purpose, then you can suggest some alternate than using File updated datetime.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to display ETL run date in the title view of any report.

Hello Expert,
I have a requirment to show the ETL run date in the title of the report.
Eg: " Sales Vs target Report : Data loaded as on date: <ETL run date>.
The ETL run date is coming in the fact table.
I am working on the OBIEE 11.1.1.5. So pla help if it is possibe.
Thanks in Advance.
Niraj

Thanks for response.
I tried to do the same. but unable to achieve. I did the following,
1. Created a init block with SQL which extract the value of ETL rundate ans associate with a repository variable (ETL_RUN_DATE). This init block was retriving the data.
I put the folowing in the Title as well as sub title view:
Data loaded as on date: (@{biServer.variables[ETL_RUN_DATE]})
I also tried to put Data loaded as on date: @{repository.ETL_RUN_DATE} this also didnot worked.
So could you please provide me the steps with actual syntax, then it willbe very much helpful for me.
Thanks
Niraj

When a Job has a Chain, the next run date can be skipped

I have read more than once in this forum that if a job is still running when the next run date arrives, the job is internally queued and runs as soon as the previous run is finished. The following code was posted to demonstrate :
begin
dbms_scheduler.create_job('j1',
job_type=>'plsql_block', job_action=>'dbms_Lock.sleep(70);',
repeat_interval=>'freq=minutely;bysecond=0',enabled=>true);
end;
/On both 10.2.0.4 and 11.2.0.1, the job starts every 70 seconds. Fine.
Now, if I create a job using a PROGRAM and a CHAIN, then the job skips every other run date, so it runs every two minutes. Here is my test case:begin
dbms_scheduler.create_program (
   program_name => 'P1',
   program_type => 'PLSQL_BLOCK',
   program_action => 'DBMS_LOCK.SLEEP(70);',
   enabled=>true);
dbms_scheduler.create_chain (chain_name => 'C1');
dbms_scheduler.define_chain_step('C1', 'STEP1', 'P1');
dbms_scheduler.define_chain_rule ('C1', 'TRUE', 'START STEP1');
dbms_scheduler.define_chain_rule ('C1', 'STEP1 COMPLETED', 'END STEP1.ERROR_CODE');
dbms_scheduler.enable('C1');
dbms_scheduler.create_job (
   job_name => 'J1',
   job_type => 'CHAIN',
   job_action => 'C1',
   repeat_interval => 'freq=minutely;bysecond=0',enabled=>true);
end;
/Is this a bug? I need the chain because my real job has two steps, so is there anything I can do to get the "non-skipping" behavior with a chain? Thanks in advance,
Stew Ashton

Replying to myself :)
While walking to my car, I realized that my "chain" logic could be replaced by an anonymous block with two lines in it!
I guess I outsmarted myself by trying to use all the appropriate features of the Scheduler instead of doing things more simply, but I still think the behavior I observed is incoherent.
I am leaving this question "unanswered" since I won't be able to test my simpler approach until Monday.
Stew Ashton

How to find the Last modified date and time of a package

Hi,
We need a clarification on how to find the Last modified date and time of a package in Oracle. We used the example below to explain our scenario,
Lets consider the following example
Let A, B be two packages.
Package A calls the package B. So A is dependent on B.
When A is compiled the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated.
Now there a modification in package B so it is compiled. There is no modification in package A.
Now when the package A is executed the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated but we did not make any change in Package A. Now we need to find last modified date and time of the package A . So we can not rely on the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS . Can u please tell us any other solution to get last modified date and time of the package A .
Regards,
Vijayanand.C

Here is an example:
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 10:57:32 2004-05-20:10:57:32 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 VALID
SQL> CREATE OR REPLACE PROCEDURE A AS
2 BEGIN
3 NULL;
4 NULL;
5 END;
6 /
Procedure created.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 INVALID
SQL> EXEC B
PL/SQL procedure successfully completed.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 11:01:53 2004-05-20:11:01:53 VALID
Note that the date under the column 'created' only changes when you really create or replace the procedure.
Hence you can use the column 'created' of 'user_objects'.

How to find the last update date time and user of record field peoplecode

how to find the last update date time record field peoplecode?
Thank you.

One can check the last update date time using the following query
SELECT LASTUPDDTTM FROM PSPCMPROG WHERE OBJECTVALUE1 LIKE 'RECNAME' AND OBJECTVALUE2 LIKE 'FIELDNAME'

How to find the last modified date of a workflow.

How to find the last modified date of a workflow.
thanks.

Hi,
There is nothing as standard that does this - you could write some code to determine the latest begin_date from each of the workflow tables and assume that this was the last time that the definition changed.
What you need is something like this:
select max(wfa.begin_date)
from   wf_process_activities wpa
,      wf_activities          wfa
,      wf_item_types_tl       wit
where wpa.activity_item_type = wfa.item_type
and    wpa.activity_name      = wfa.name
and    wfa.version            = (select max(version) from wf_activities wfa1 where wpa.activity_item_type = wfa1.item_type and wpa.activity_name = wfa1.name )
and    wpa.process_item_type = 'your item type'
and    wpa.process_item_type = wit.namewhich I think gives what you want.
HTH,
Matt
Alpha review chapters from my book "Developing With Oracle Workflow" are available on my website:
http://www.workflowfaq.com
http://forum.workflowfaq.com
NEW! - WorkflowFAQ Blog at http://thoughts.workflowfaq.com

How to find the last executed date of any program?

<<Frequently asked questions. So search>>
How to find the last executed date of any program?
is there any system variable or function module?
Edited by: Matt on Oct 5, 2010 12:48 PM

check the transaction STAD.
Prabhudas

How to find the last run date of the report..

Similar Messages

Maybe you are looking for