How to find the length of the resultset

how to find the length of the resultset

(Doing a select count as somebody suggested is nota
good solution, as the count can change betweenyour
count query and your real query.)And the number of rows can't change between getting
the last one and doing the actual work?I don't think so. Once you've got the ResultSet, I don't think it will change under you, unless you explicitly set it to SCROLL_SENSITIVE.
I could be mistaken though.

Similar Messages

How to change the lengths of the layout

Hi ,
I am executing one report, output is coming fine but next if i go to print preview for PO number only 9 digits are appearing one digit is missing, actually column is trucated, there in print preview there is one tab called Change Layout, there if i see length of the PO no is 9, so its showing only 9 digits, actually length of the PO no should be 10.in change layout the length is editable i can change from 9 to 10, after that there is a button called copy, then it will show correctly, it works only one time, so each and every time user has to change the length, so can any one suggest how to change that length in the layout permanently, bcos there is no save button there.
Can any one tell me from where all these lengths are coming which are appearing in change layout.Surely its not coming from the report.

Hi friend,
That depends upon the space provided by the ALV column for that variable or the heading size its not based on the data element size.
If you want to be more clear lust count the space available for each field available at the print preview.
The details for that are stored in table T180S just see the documentation available for that table.
And see when the table is getting filled like that so that you will be able to find a solution where and how it is getting populated.
Use column width optimization for getting the correct output.
If you have any queries in this please revert back to me i will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 5, 2012 4:01 PM

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How to find out what are the functions supported by string class

Hi,
Can any one let me know how to find what are all the functions supported by the string class in standard(STL) library on solaris.
Regards,
Vignesh

1. Any C++ textbook that covers the Standard Library will tell you about the standard string class. A good tutorial and reference for the entire Standard Library is "The C++ Standard Library" by Nicolai Josuttis, published by Addison Wesley.
2. WIth Sun C++, the command
man -s3C++ basic_string
provides documentation for the default libCstd version of the Standard Library.
3. You could look at the <string> header itself. I don't recommend that approach.

How to find out Locks on the database objects

how to find out Locks on the database objects

The following notes should be helpful:
Note: 200590.1 - bde_session_locks.sql - Locks for given Session ID
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200590.1
Note: 1039273.6 - SCRIPT: VIEWING LOCKS ON OBJECTS HELD BY SPECIFIC USER
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=1039273.6
You can also search Metalink, there are many notes/scripts published there which would be also helpful.

How to find out what is the lock key for the computer

How to find out what is the lock key for the computer?

You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

How do i make a still image (photo) fit the length of the music? I record music and want to put the tracks to a video file with a still image of my business logo in the background. Any help?

How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?

Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
See this iMovie Help topic:
http://help.apple.com/imovie/#mov3a883915
You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
John
Message was edited by: John Cogdell - added Note

How to increase the length of the subject line in email using FM

Hi
we have maintained 50 characters for the subject line initially, but some subjects are having more than 50 characters. how can we increase the length of the subject line in email.
urgent.
points will be rewarded generousely.

Hi Rana,
In this case, you have to create a user defined field of required length under Journal Transactions Header to fill the data.
Regards,
Vijay Kumar
SAP Business One Forums Team

How to increase the length of the identifier?

I want to create a table with a column name as:
"domainnameregistrationassistance"
oracle 9i does not allow me to do this.
as the identifier length is fixed to 30 characters.
how do i increase the length of the identifier?
any help on this will be great!

Don't forget that there is a comment space for each table
and column, so calling the column DNR_ASSIST doesnt
revent you from doing ...
COMMENT ON TABLE M_SCHEMA.DNR_ASSIST IS '
Domain Name Registration Assistance';

How to restrict the length of the input?

Hi all, could any one tell me how to restrict the length of the input string? My SOA Suite is 10.1.3.1
I tried the following; getting an error.
<element name="RestrictLengthProcessRequest">
<simpleType name="SSN">
<restriction base="string">
<length value="10"/>
</restriction>
</simpleType>
where RestrictLengthProcessRequest is the message name of the corresponding .wsdl and SSN is the input whose length is to be restricted.
The error is : 'Attribute name not defined on element simpleType'
Thanks in advance.
Edited by: user11275112 on Aug 27, 2009 11:44 PM

Hi swathi,
For this you have to create a simple data type. No need of writing a code.
Go to Dictionaries -> Local Dictionary -> Data Type - > Simple Type - > Right click and "Create Simple Type".
Here you should create a Simple type with String as built-in Type. Here you will also see the Length Constraints option.
Set the value of maximum length and minimum length. In your case set the value of maximum length to 10. At runtime this will not allow the user to enter more than 10 characters.
Now create an attribute and bind it to this newly created simple type. Bind the value of the input field with this particular attribute.
Regards
Manohar

How to fix the length of the output file

hi,
I have 1000 records in my source table which need to be inserted into file. But the length of the rows in my file should be only 500 i.e there should be two files getting created for this 1000 records i.e my each output file should contain only 500 rows not more than that.
Depending on the number of records present in the source, the file getting created will be varying as my file should contain only 500 rows each. for ex: if 5000 rows are present then 10 files need to be created.
How this can be achieved in ODI.
Thanks in advance

I believe this can achieved using jython easily .
Here is a sample output code
Command on Source - Select database Technology and required logical schema
Command on Target - Jython
import java.sql as sql
import java.io as io
import string,re
import java.lang as lang
import java.text as text
myCon = odiRef.getJDBCConnection("SRC")
myStmt = myCon.createStatement()
my_query="SELECT * FROM SCHEMA.TABLE_NAME "
file_count=1
i=1
myRs = myStmt.executeQuery(my_query)
writer=io.BufferedWriter(io.OutputStreamWriter(io.FileOutputStream('c:\\FILE_'+str(file_count)+'.csv')))
md=myRs.getMetaData()
collect=[]
while (i<= md.getColumnCount()):
    collect.append(md.getColumnName(i))
    i+=1
header=','.join(map(string.strip,collect))
#writer.write(header+'\n')
myRs = myStmt.executeQuery(my_query)
md=myRs.getMetaData()
myRs.setFetchSize(5000)
i=0
while (myRs.next()):
    j=1
    col=[]
    while (j<= md.getColumnCount()):
        col_type=md.getColumnTypeName(j)
        col_name = myRs.getString(md.getColumnName(j))
        if col_name is None:
            col_name= ''
        col.append(col_name)
        j+= 1
    data=','.join(map(string.strip,col))
    writer.write(data+'\n')
    #print data+ '\n'
    i +=1
    if (i == 500):
        writer.flush()
        writer.close()
        file_count +=1
        writer=io.BufferedWriter(io.OutputStreamWriter(io.FileOutputStream('c:\\FILE_'+str(file_count)+'.csv')))
        i=0
writer.flush()
writer.close()
myCon.close()Please run this code and let me know if you need any other help or modification to get your desired results.

How to find latest entry in the table according to time

how to find latest entry in the table according to the time
is there any function module to do so
\[removed by moderator\]
Regards
Shashi
Edited by: Jan Stallkamp on Aug 25, 2008 4:39 PM

Hi,
If you want to read the entry from an internal table,
sort the internal table in the descending order by the time and
delete adjacent duplicates by comparing the fields other than time and the internal table will have the latest record.
Suggestion: instead of only time try to have one more field called date with the time combination
Regards,
Ramesh

How can I know the length of the image data section of a PSD file

I'm a C++ programmer developing a project to parse PSD files, and it's necessary to know whether there is a length field indicating the length of the image data in image data section of a PSD file, if not, how can I know the length?
Thank you.

Sorry I can't help, maybe there is some information in the SDK?
http://www.adobe.com/devnet/photoshop/sdk.html
Or someone might be able to help in this forum?
http://forums.adobe.com/community/photoshop/photoshop_sdk

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

How to increase the length of the Info object

Hi All
Any one have idea about how to increse the length of the Info object Char(beyond 60). Can you please explain me in detail we are using BI7.0.
Thanks
Vani

Hello Vani,
You cannot increase the length of an info-object beyond 60 chars.However if you want to store a characteristics data with more than length 60, then you may create separate info-objects
for example: if you need to store 'notes' which might have length more than 60,
then you may create info-objects like notes 1/3 ---store first 60 chars.
notes 2/3 --- store next 60 characters and so on.
Thanx
Priyanka

How to find the length of the resultset

Similar Messages

Maybe you are looking for