How to find the list of users used transcation from last 2 days plz urgen

hi friendd
i am in need of knowing the list of users used transcation in last 2 days
can any one help me . how to find out the list of users and used trancation in detail or step by step
thanks in advance .i know that i can see in st03 but i dont find any user list or trancations .
apart from that so we have any other transcation to see the user in sap abap box
regards
raja

This info has been posted before but here you go (this is an alternative way to Bernhards):
ST03N, make sure you are in Expert Mode (not Service Engineer)
Expand Workload
Expand Total
Double Click on the day you want to analyse
You can see transaction details under Transaction Profile -> Standard
You can see what tx a user has started under User & Settlement Statistics -> User Profile
If you are not seeing any data then speak to your Basis administrator about what they are doing with the log files.

Similar Messages

How to find the list of USER-EXITS or BADI for the transaction ABSO

Hi all,
Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
Thanks & Regards,
gyanaraj

Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.

How to find the list of users loggin through HTTP session

Hi All,
we are using SRM 5.5 system with ITS. I am able to find the list of concurrent users from ABAP level using report "CCUEVAL" but how do I know the list of concurrent users logged in from HTTP session?.
could you please let us know the SAP note number or any report?
Thanks in advance,
Mohan Karri

Hi Uday,
thank you very much for your prompt response.
I need a report because by end of every month I would need the average peak http users list for the reporting month.
or tell me how to find " how many users logged in through HTTP session in a day?"
Thanks
Mohan

How to find the list of un used table names in a schema?

Hi,
I have a doubt in Oracle. The doubt is that If we are using any tables in Function Or Proc.... Then...We can list all those used table names from USER_DEPENDENCIES system table. Right...
But, If the table is used with Execute Immediate Statement, then, those table names are not coming out with USER_DEPENDENCIES system table. Because they are identified at run time and not compile time.
It is fine. And I agree.. But, If I want to list out those tables also...then...How to do? Any idea?
I think ‘USER_SOURCE’ system table may not be the right one. If there is any other system table avails for this purpose...then..it would be very grateful to extract right...
So I am wanting that exact system table.
Please let me know about this, if you have any idea or check with your friends if they have any idea.
Regards,
Subramanian G

Hi Guys,
Thanks for all your answers.
Yes....You are all right. We can list out the used tables upto certain extent. Anyhow, I have done some R&D to derive the SQL's which is given below:
SELECT TABLE_NAME FROM USER_TABLES
MINUS
SELECT DISTINCT UPPER(REFERENCED_NAME)
FROM user_dependencies
where
referenced_type='TABLE' and UPPER(NAME) in
select distinct UPPER(object_name) from user_objects where UPPER(object_type) in
'MATERIALIZED VIEW',
'PACKAGE',
'PACKAGE BODY',
'PROCEDURE',
'TRIGGER',
'VIEW',
'FUNCTION'
UNION
SELECT UT.TABLE_NAME FROM
SELECT TABLE_NAME FROM USER_TABLES
MINUS
SELECT DISTINCT UPPER(REFERENCED_NAME)
FROM user_dependencies
where
referenced_type='TABLE' and UPPER(NAME) in
select distinct UPPER(object_name) from user_objects where UPPER(object_type) in
'MATERIALIZED VIEW',
'PACKAGE',
'PACKAGE BODY',
'PROCEDURE',
'TRIGGER',
'VIEW',
'FUNCTION'
AND REFERENCED_OWNER=(SELECT sys_context('USERENV', 'CURRENT_SCHEMA') FROM dual)
) UT,
( SELECT * FROM USER_SOURCE
WHERE NAME IN
( SELECT DISTINCT NAME FROM USER_SOURCE
WHERE TYPE NOT IN ('TYPE')
AND
UPPER(TEXT) LIKE '%EXECUTE IMMEDIATE%'
) US
WHERE
UPPER(US.TEXT) LIKE '%'||UPPER(UT.TABLE_NAME)||'%'
AND
(UPPER(US.TEXT) NOT LIKE '%--%')
The above SQL Query can list out unused tables by checking the Dynamic SQL Statement also upto some level only.
Once we extracted the list of unused tables, having a manual check would be also greater to verify as it is should not impact the business applications.
Regards,
Subramanian G

How to find the list of all tables populated

How to find the list of tables populated in the implentation of a particular company. DD02L contains all the tables SAP having. But i want only which are configured for a particular company.
Also how to find the list of reports used by all users in a particular company. TSTC contains all transactions. But i require only reports used by a particular company.

Hi Mohamed
You use Solution Manager to do the comparison for you. There are some nice features that will highlight all your customised coding. Have a look at the SolMan resources on the Support Portal e.g. using SolMan for upgrade comparisons.
Rgards
Carl.

How to find the list of all user exits modified by the users

How to find the list of all user exits using by in R3

Hi Mohamed
You use Solution Manager to do the comparison for you. There are some nice features that will highlight all your customised coding. Have a look at the SolMan resources on the Support Portal e.g. using SolMan for upgrade comparisons.
Rgards
Carl.

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

How to find the List of expired user Ids

How to find the List of expired user Ids

Can you please tell me the question in detail.What do u mean by expired users?
IN a Client or in a System.

Query to find the list of users having access to a particular scenario

Hi,
I am learning Hyperion Planning 9.2 x version. I wanted to know the query to find the list of users having access to Plan Iteration - 1 scenarion.
As I am new to Hyperion Essbase and Hyperion Planning, I am assuming these ideas work out to get the desired result.
1) As Hyperion Planning uses Relational DB to store the User Security information, we can query the list of users who is having access to Plan Iteration - 1 Scenario.
I am not sure if this solution works. Please correct me If I am wrong.
2) We can also query from the essbase editor to find out who all having access to this scenario.
If the above is correct, can you please provide me the query.
I am really need of this and I will be happy if any one provide the solution.
Thanks & Regards,
Upendra. Bestha

Hi,
If you are looking for some SQL to retrieve the access rights by member then you can use something like (SQL Server code though can easily be modified for Oracle)
SELECT usr.object_name as Username,mem.object_name as Member,
'Access Rights' = CASE acc.access_mode
WHEN -1 THEN 'None'
WHEN 1 THEN 'Read'
WHEN 2 THEN 'Write'
WHEN 3 THEN 'Write'
ELSE 'Unknown' END,
'Relation' = CASE acc.flags
WHEN 0 THEN 'Member'
WHEN 5 THEN 'Children'
WHEN 6 THEN 'Children (inclusive)'
WHEN 8 THEN 'Descendants'
WHEN 9 THEN 'Descendants (inclusive)'
ELSE 'Unknown' END
FROM
hsp_access_control acc, hsp_object mem, hsp_object usr
WHERE acc.object_id = mem.object_id
AND acc.user_id = usr.object_id
AND mem.object_name = 'Plan Iteration - 1'
Cheers
John
http://john-goodwin.blogspot.com/

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

How to find the list of Tables....

Hi
How to find the list of Tables associated with When a Goods Issue is done for a Process Order ??
Kindly tell me step-by-step procedure in browsing it.
cheers
MaruthiRam

Hi
goto SE16 Click F4, You have two options Information system & Sap Applications.
Click on SAP Applications & selec the application you wnat to see, for E.g Purchasing you can click on materials managemnt, Purchasing if you drill down you will see the list of tables....
reward points if useful
Thanks & Regards
Kiran

How to find the list of unsettled fully/partially PM orders

Hello,
Pls let me know how to find the list of fully/Partially unsettled orders list?

you can find it for a collection of orders thru S_ALR_87013015. get the list display of orders using IW 39 copy the order number to clipboard and transfer to S_ALR txn. Choose the correct controlling area.
you get the settled amount credit / debit etc

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How to find the list of users used transcation from last 2 days plz urgen

Similar Messages

Maybe you are looking for