How to find the next empty member to use it in the FIX statement?

Hi,
I need to create a HBR that, when launched, finds the first member that has a #MISSING value and updates this value with 1. I've tried to create similar code to those from Workforce, however with no success.
The value of 1 should be entered for the first empty child of "Transactions" in combination with account "A-1061800", "No Custom3", "No Custom4", "FY10", "E-00000", "BegBalance", "Robocza", "Budget", and "C2-00000".
The code I've developed looks like this:
SET CREATENONMISSINGBLK ON;
+FIX("BegBalance",[KHSA_PLAN2_CUSTOM3],[KHSA_PLAN2_CUSTOM4],"E-00000","FY10","Budget","Robocza",[KHSA_PLAN2_CURRENCY],HSP_InputValue)+
+"A-1061800"(+
IF(@MAXS(SKIPMISSING,@CHILDREN("Transactions")) == #MISSING)
+"C2-00000" = 1;+
ENDIF)
ENDFIX
The HBR however updates all children of "Transactions" with value of 1 - for two days I've been searching for a way to fix on a first empty child of "Transactions".
Maybe someone could help me, please?
Regards
Marcin Stawny

There isn't a built-in function to perform calculations on thable cells. What you can do is to retrieve thable cells values and calculate the average by yourself.
To retrieve a bunch of cells in a single instruction you can use GetTableCellRangeVals: prerequisite for this function to work correctly is that cells are all included in a Rect structure (shortly, a rectangle) and are all of the same data type. See the help for the function for some explanations and the link to an example of its usage. In Cell range parameter you can pass VAL_TABLE_ROW_RANGE (row) macro to retrieve an entire row. See here for details.
Once you have retrieved cell values in an array, you can pass it to Mean function to calculate the average.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

How do I write an excel file and check what the next empty column would be to put the data in?

I have somehow managed to write the portion of labview that prompts the user for a name. It checks a file to see if they are a new user or not and then assigns a number if they are. The program then acquires data that is to be put into a spreadsheet. Each subject will have ten trials which will have three columns. How do I get the information into the columns and then check each time to see which column it should go into (i.e. the next empty column for that subject). I have attached what I have thus far. I wrote this a long time ago and haven't touched it for some time so everything is a blur.
Attachments:
promptForSwimmerName.vi ‏76 KB
Swimmers.dat ‏1 KB
Main__dummy.vi ‏28 KB

To perform those operations in excel you will use ActiveX. I will attach some examples of using Excel in LabVIEW and you can use these to do exactly what you want.
These three examples show how to manipulate properties, write to excel and read from excel. Let me know if there is more I can do.
Allan S.
Applications Engineering
National Instruments
Attachments:
BorderExample.vi ‏102 KB
ActiveX_write_Rows_To_Excel2000.vi ‏90 KB
ReadExample.vi ‏80 KB

My MBA was stolen. I need to buy a replacement the next day bec I used it for work. I downloaded the Find iPhone apps and registered my stolen MBA. If I will erase MAC will it also erase the data of my new MBA?

My MBA was stolen. I need to buy a replacement the next day bec I used it for work. I downloaded the Find iPhone apps and registered my stolen MBA. If I will erase MAC will it also erase the data of my new MBA?

did you turn 'find my mac' ON your MBA BEFORE your it was stolen? if not, you will not be able to do anything to the stolen MBA
if you did turn it on before it was stolen, yes it will erase everything on the MBA

Preview: In a group of PDF files in the same window, going to the next or a previous PDF file displays the bottom of PDF by default, not the top. How do you change this?

Preview: In a group of PDF files in the same window, going to the next or a previous PDF file displays the bottom of PDF page by default, not the top of the PDF page. How do you change this? In Mac OS 10.9 and previous, going to the next or previous PDF file displays the top of the PDF by default. Is there a way to change this back? When I go to the next or previous PDF file, I want to first view the top of the page, not the bottom. This really doesn't make any sense. Any help? Thanks!
MacBook Air (13-inch, Mid 2012)
2 GHz Intel Core i7
8 GB 1600 MHz DDR3
500 GB Flash Storage
Preview Version 8.0 (859)
Mac OS 10.10.1

That to me seems like a bug in Yosemite.
Apple Feedback http://www.apple.com/feedback/
Bug Reporter https://bugreport.apple.com/

How to find out that particular structure is used in which tables

Hello Friends,
Most of the times through techinal information we come to know the table name for a particular field.And in se16 when i give that table name than system says its structure and not the table.So in se11 when i give that structure name in database table field, its shows all the field in that structure, but not the data stored in that field.
So my question is how to find out that particular structure is used in which tables,so that i can view data stored in that structure?
Thanking you guys in advance.
Regards,
Jitendra

Dear,
When you click on the technical information it will give the structure name and field, double click on the structure and it will take you the display structure screen, there you will have the where-used List icon (Ctrl + Shift + F3) at the top , click on that and it will show the options, select Database tables and execute, it will give the tables related to the structure, you can explore the list of tables and find where your required field is stored in them.
Thanks & Regards,
Vijaya Bhaskar A

Programmatically playing the "next" video in a playlist results in the old video playing as well

(Using OSMF v1.6)
When a video has finished playing, my player will automatically play the next video in a playlist, after doing the following:
var loadTrait:LoadTrait = myMediaElement.getTrait(MediaTraitType.LOAD) as LoadTrait;
loadTrait.unload();
myMediaContainer.removeMediaElement(myMediaElement);
myMediaPlayer.media = null;
--- proceeds to create the new mediaElement (ex: myNewMediaElement) with appropriate metadata, etc
myMediaContainer.addMediaElement(myNewMediaElement);
myMediaPlayer.media = myNewMediaElement;
Invariably this has resulted in the new video playing normally, but the *old* video also playing, I assume as an element/player/container behind the new one. So you get two simultaneous audio streams.
Executing the same sequence of commands with a user interaction (i.e. clicking a "next" button to play the next video) does not display this behavior.
I have done some searching and I cannot find anything else to try; does anyone have any ideas?
Thanks!

Hi jethroq,
please report an issue at https://bugs.adobe.com/jira/browse/FM providing a replication example code and asset links; it seems that you use also a youtube plugin, so it's hard for us to replicate your sutuation.

CD-ROM drive letter changed to the next available letter after an issue with the Storage appliance.

Server platform:Windows server 2008 R2 Enterprise.
Last time we experienced an issue with the storage device we are using to attach a disk to our server 2008 (virtual). This storage device is also providing storage to the ESX where the server 2008 is hosted.
The drive configuration in the server was:
System C:\
Tools D:\
Apps E:\
CD-ROM F:\
Some hours after the storage appliance issue, we realized the Application on the server was not working and then we restarted the server. After restarting the server we went to the file explorer and realized that the Apps volume had the drive letter F and
the CD-ROM had the E letter assigned.
I assume windows lost the Apps disk due to the SAN disconnection. Maybe the CD-ROM was also disconnected and when the Storage appliance was connected again the CD-ROM acquire the next drive letter it found, which was the letter E:. Then the Apps disk was
also discovered by Windows and it assigned the next available letter, F:.
I was looking for some MS knowledge base to see how Windows 2008 server assigns the letter to the CD-ROM and how we can permanently fix the letter assigned to the disks and the CD-ROM so that this issue won't happen again. As you know many applications use
the path including the drive letter.
I thought that when you set a CD-ROM drive letter, it remains forever as is, and that in case of a SAN disconnection Windows assigns the same letter the drive had before the disconnection.
Please advice if you have some documentation about this. And let me know if you have any thoughts about what really happened to prevent this in the future.
Thank you guys!!

Hi, for the APP's drive it could had been assigned a new letter if the system did seen it as a new disk/partition.
The partition was on your esx's LUN on the SAN ? (not an iSCSI connection from inside a VM?)
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Iphoto6: several issues: 1st my library is so messed up, everytime I delete a photo, in the next moment I look at a file the deleted photo has quadrupled, as with files, dates wrong

iphoto6: several issues: 1st my library is so messed up, everytime I delete a photo, in the next moment I look at a file & the deleted photo has quadrupled, as with files, dates are all wrong, missing a few years.............

Sounds like your database is damaged.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Next upcoming expert day Looking forward to the next Expert Day any estimated date of the event

next upcoming expert day Looking forward to the next Expert Day any estimated date of the event
it‘s great to be able to post in the forum and obtain help
my gratitude and appreciation is certainly provided; may I inquire
as to any estimate Is there another
Upcoming Expert Day Event
Since the designated Expert Day is stated as the event has now concluded for
Expert Day in English (Consumer) - April 18-19, 2012
Hopefully before September
Thanks
Respectfully

However if it is Sep I’ll gladly wait and that is still excellent the designated Expert Day’s are great
my gratitude and appreciation is certainly provided..

How do I change the settings on my ipod so that it plays continuous music. Right now, it plays the same song over and over, even if I select the shuffle icon. It used to show the continuous play icon, it doesn't anymore.

How do I change the settings on my ipod so that it plays continuous music. Right now, it plays the same song over and over, even if I select the shuffle icon. It used to show the continuous play icon, it doesn't anymore.

Right click on a movie(in iTunes), and click "get info" then go to album artwork and add the artwork that you want...
-Messymeese

HT5878 how to check the detail of font being used for reading the file received by an email

I received word file as an attachment with email on my iphone. I want to check the detail on font being used for reading the word file received as attachment in an email.
Thanks

You don't need to copy the cert out of your configuration. OpenSSL has an "s_client" subcommand which can open an SSL connection and verify the cert for you. It even knows how to do STARTTLS. Something like this ought to do it:
openssl s_client -starttls smtp -CAfile /path/to/ca/file -connect your.ironport:25
The /path/to/ca/file is necessary to provide openssl with a cache of root CA certs. You could use -CApath instead of -CAfile if you have a hashed directory of root CA certs instead of a single file containing them all.
You can also point this at your partner's SMTP server as well.

How can i know which index will be used when executing the query ?

1 ) I have query in which i have 3-4 tables but there multiple index on one column .
so how can i know which index will be used when executing the query ?
2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
3) Please Provide me some document of EXplain plan ?

Hi Jimmy,
Consider the below example
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
CREATE TABLE FIRST AS
SELECT * FROM all_objects;
UPDATE FIRST
SET object_name = 'TEST'
WHERE owner != 'SCOTT';
CREATE INDEX idx_first ON FIRST(object_name);
SELECT *
FROM FIRST
WHERE object_name = 'TEST';
It has not used index
Execution Plan
Plan hash value: 2265626682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
SELECT *
FROM FIRST
WHERE object_name = 'emp';
This has used the index
Execution Plan
Plan hash value: 1184810458
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
From this we can come to the conclusion that, whether to use one index or not by oracle
would also depend on the data which is present in the table. This has to be this way as
we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
scan, it would be a performance hit when it searches for the second query ie where object_name
='emp';
2.
If we have a query like below.
select * from emp
where upper(ename) = upper(:p_ename);
Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
Create index idx_ename on emp(upper(ename));
Regards,
Cool

Is there a way to list the next 5 appointments on my calendar in the notification area?

is there a way to list the next 5 appointments on my calendar in the notification area?

I had that on but it doesn't show anything the reminder only shows up if the event has a reminder set for a specific time. I want to straight up see the next 1,5,... Events in list form. This may not be possible but it would be great. Just like when you are in calendar and display by list.

How do i remove this feature? where using google maps the input box has this in it( Enter your address line 2 here)/In hotmailmail new email it reads (Enter your email here) e

how do i remove this feature? where using google maps the input box has this in it( Enter your address line 2 here)/In hotmail new email on the enter page it reads (Enter your email here) .
You have the remove these statements before entering an address , and before sending an email or with the email it will stay on the email , google maps will not work.

Try this -
<img src="assets/jpgs/Prodigy Logo Large 2014.jpg" width="180" height="180" alt="" style="display:block;">
What you are seeing as whitespace is the space reserved for glyph descenders on any element that is rendered within a text box (i.e., an inline element). By making the image "display:block" you eliminate that space because a block element doesn't have descenders. If that works to your satisfaction then you can give the logo an id, and create a CSS selector containing that block style.

Hi yours, and it will be sent to O iphone 5s Mobicom Co.? I want Mobicom LLC coming by? apple company iphone 5s faster sent to do Mobicom LLC. When Mobicom LLC phone 5s in the next, and it will send you in the gym did Mobicom LLC ready to send. :))

Hi yours, and it will be sent to O iphone 5s Mobicom Co.?
I want Mobicom LLC coming by? apple company iphone 5s faster sent to do Mobicom LLC. When Mobicom LLC phone 5s in the next, and it will send you in the gym did Mobicom LLC ready to send. :))

What the **** are you on about?
Do you have a proper question to ask? If so ask it in a proper and understandable way.
What you have typed here is just plain gibberish!!

How to find the next empty member to use it in the FIX statement?

Similar Messages

Maybe you are looking for