How to find the objects that are used for a particular BEx query
Hi ,
I am preparing the inventory for BEx queries. Means for a particular BEx query I want to know the correcsponding
1. Selection screen variables
2. Characteristics
3. Restrcited, Calculated and normal key figures.
I have checked all the BEx query related tabe but unable to find the proper relation between these tables to get the desired output.
Can you help for table joins to get the output as mentioned above.
Thanks in advance.
Regards,
Sai
Hi,
you want find the total information about query details use the T CODE - RSRTQ.
give the proper selection then execute.
please find the doc.
RSRTQ – Query Definition – Multipurpose T-Code on BEx Queries
Thanks,
Phani.
Similar Messages
-
How to find out which connection is used for access to Bex query?
Hello,
in our BO 4.0 environment we have a lot of different connections to Bex queries.
There exist more connections to one Bex query.
For example to Bexquery1 we can access with 2 connections, connection : BX1 (connection specific for one query) and connection DEVcubes(generic connection to all cubes)
How can I check in Webi report over Bex query which connection is currently used?
Thanks a lot !
RudolfHi Rudolf,
Your requirement can be achieved using QueryBuilder.
Please refer to following QueryBuilder step-by-step post by Manikandan:
http://scn.sap.com/community/bi-platform/blog/2012/10/11/businessobjects-query-builder-queries
In bove post, Go to Universe Queries section -> All webi report using one connection
In case you dont know how to use QueryBuilder, please refer to following post:
http://scn.sap.com/docs/DOC-42952
Please let us know if you get any doubt. -
To get all the objects that are used inside the class
Hi All,
All i wanna know is to get all the objects that are used inside the class.
Ex :
Class A{
Emp e;
public add(Dept d){
e.deptid = d.deptId;
in this class i have two objects, one Emp obj and another Dept object.
I wanna get the details abt this class Emp and Dept by simply parsing the file and by not loading this class in JVM.
Could any pls hel me out.??
thx.I wanna get the details abt this class Emp and Dept
by simply parsing the file and by not loading this
class in JVM.Your problem statement is vague and the constraint is IMO hypothetical. -
How to find the TCODE that is created for the table maintanance generator
Hi ,
How to find the TCODE that is created for the table maintanance generator of particular table,if we only know the table name.
Regards
Ramakrishna LHello,
I try it this way
1. Goto SE16 --> enter table TSTCP.
2. In the selection-screen displayed, enter
PARAM = *<ZTABNAME>*
You will get the t-code for the TMG.
BR,
Suhas
PS: Are you sure a t-code has been created for this TMG ? -
How to find the urls that are longer than 260 characters
Hi
I'm getting an error using Restore-SPSite thats most likely caused by URL's longer than 260 characters. How can I find out which URL's are too long? It's a huge site collection so it's not an option to search manually.
Regards
Jakobcheck this blog, allows you to take an inventory of all files in your web application and flag those files where the path (or URL) is longer than 260 characters.
Locating files and pages with URLs that are too long for SharePoint
Also check this: http://social.technet.microsoft.com/Forums/en-US/881d62e6-08c3-43b6-a9f1-96161ffa0201/how-to-write-a-powershell-script-to-find-the-url-path-length-of-all-the-files-and-folders-in?forum=sharepointdevelopmentprevious
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
How to get the Objects which are used in the webi Report.
Hi Expert,
I am trying to get the list of WebI reports and Objects which are present in the report at BO 4.0.
I can able to get details for only the list of reports and universes.
Could any one help me to get those details.
Regards,
Murali SWith 4.0, there is no longer a way to do this using just the .NET SDK because the ReportEngine SDK no longer exists for .NET. Instead, you'll have to look at using the RESTful Web Services SDK for Webi which runs in the Web Application Container Server on your report server (NOT on the web server!)
RESTful web services are platform-independent and don't require the installation of any SDK files. Everything is done through standard HTTP Get, Put, and Post commands and the results are returned in either XML or JSON format. You don't mention which service pack of 4.0 you're on, but the RESTful web services have evolved over the course of the 4.0 service packs, so more recent is definitely better.
You can find the documentation for this in the "Development Information" section at help.sap.com/bobip40. There is also a "space" on SCN for this at http://scn.sap.com/community/restful-sdk and there are some links on this page for various resources and sample code.
-Dell -
How to find the processor we are using in C code
I have to run a code on both solaris and linux.But before running the code i want to know which processor it is going to run and accordingly i can insert processor specific functions or code........is there are any preprocessors in c which can help to find it
By "processor" do you mean the computer chip compiling the code, the computer chip executing the application, or something else?
Standard C provides no way to find out what chip you are using, but most platforms provide a way, different for every platform. By "platform", I mean the combination of computer and operating system.
Using Sun Studio on Solaris, the compiler predefines some macros that tell you the class of computer being compiled for. See the C Users Guide for details. On a SPARC system, the compiler predefines the macro __sparc. If I'm compiling for 64 bits, it predefines the macro __sparcv9. On an x86 or Opteron system, it predfines the macro __i386. On an Operton system in 64-bit mode, it predefines the macros
__x86_64 __x86_64__ amd64 _amd64__
The Solaris OS provides ways to find out the architectural characteristics, mostly via command-line utilities such as prtconf, psrinfo, and others. Linux provides x86conf. -
How to Find the Queries that are not hitting the indexes..
Guys,
Hope you all doin well.
Would you guys please tell me any view , or any resource that can help me to identify those SQL Statements that are not hitting the indexes properly, Causing the system to slow down at peak times.
Thanks
Rgrds
Y.Vo.any resource that can help me to identify those SQL Statements that are not hitting the indexes properlyInteresting ! Is there any specific reason of looking only for those queries, which are not making proper use of indexes.
hare krishna
Alok -
Urgent-How to find the tables which are used in DB02 transaction
Hi,
Can anybody help me in finding the tables in Tablespaces tabstrip & Tables n Indexes tabstrip in DB02 transaction??Hi,
open the following link.
http://books.google.co.in/books?id=jTTrZjucb_QC&pg=PA37&lpg=PA37&dq=dbo2%2Bsap&source=web&ots=FgA9pC3u24&sig=sOG3EJRm5HGW2aFpkVVH_oxBjjo&hl=en#PPP1,M1
Master data load failure
Reward if Helpful
Jagadish -
How to change the sequence that VL10 use for sales order during DN creation
We are using VL10 for DN creation , VL10 is executed in background as a batch job ..... we have created a variant and have given range of shipping points for which we want to create the Deliveries.
What we want to understand is that how SAP standard code for VL10, sorts the sales orders for which the delivery are to be created using VL10?
we would like VL10 to process the sales order which belong to same shipping point in some order....so that delivery needs to be created for the first sales order rather than last sales order for a given shipping point....
Is there any sort order that SAP follows to pick which order it will consider for delivery creation ....first over the other sales order where the shipping happens to be same ? if yes then is there any way we can change it ?
Any guidance is appreciated
Thanks
RajeyWe are facing the same problem and are running at 4.7.
There are orders with the same goods issue date and if so, it should be sorted by order no.
Nevertheless, it does not sort it by order no but we could not find yet what the sort criteria is if it runs in the background and how to change these rules. -
How to identify the project in CMOD used for a particular data source
Hi
I had a Business Content Data source which is enhanced with ZZ fields and user exit is written in CMOD.
How can i find in which project used to write the code for that particular data source.....
When i check CMOD i can find nearly 10 to 20 different projects
ThanksHi,
One simple way is goto CMOD and give project names with Z* or Y*. First findout the naming convensions following in your project and see.
Then gibe projects one by one and select COMPONENTS option and click on Display, if you find the following Function Exits means it is our DataSource project
EXIT_SAPLRSAP_001
EXIT_SAPLRSAP_002
EXIT_SAPLRSAP_003
EXIT_SAPLRSAP_004
Thanks
Reddy -
How to find the instances that are running in a server?
i have a Solaris server and previous engineer did a custom install of multiple instances of oracles.
how can i find out the instances? such as instance name, port, database name, etc.
thanks.user1035690 wrote:
i have a Solaris server and previous engineer did a custom install of multiple instances of oracles.
how can i find out the instances? such as instance name, port, database name, etc.
thanks.For currently running instances:
ps -ef | grep ora | grep pmonPort is for listener configuration and 1 listener can serve to multiple instances. You should check listener.ora file.
Teymur Hajiyev
Oracle 10g Certified Master
http://teymur-hajiyev.blogspot.com
http://dba.az -
Used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10. Now with V11, cant find the button that compares two libraries and finds the songs that are different. Anyone know how to do this now?
Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter? -
I was having trouble migrating the Master and Work repositories from my QA to my Prod environment. I was getting an error message that the internal id's were alike so I changed the internal id in my Prod Master repository. Then I tried to migrate the Work repository and was getting a similar error. I did a search on the internet for the error message and it recommended that I renumber the Work repository so I did. My concern now is how these changes affect the objects that are already in the repositories? Will those objects continue to run? Also do these changes take affect immediately or do you need to cycle the ODI agent?
Well I cannot completely assure you but so far I have not faced any issues after a renumber. It will affect the exist object only when you have imported the object in synonym_update mode. I believe you have the daily backup of your production repository.
Bhabani
http://dwteam.in -
How do you easily find the movies that are on sale?
How do you easily find the movies that are on sale? I can't seem to easily find any of the $9.99 HD movies or the $5- $6 non-HD movies.
Go to Settings>iTunes & App Store and turn Videos off under Show All.
Maybe you are looking for
-
Ipad 2 not getting wifi @ home like it use to.. Much weaker signal
Ipad 2 wifi @ home gets weak singalong other apple devices , MacBook Pro not a problem... Just started happening, does it have to do with iOS upgrade, how can I get service back.. I am limited to being almost next to my router
-
How to update the r_ord for r_name (A & B)?
hello experts, i having a below table @tbl, DECLARE @TBL TABLE (UID INT, R_ID INT, R_NAME VARCHAR(5), R_ORD INT) INSERT INTO @TBL VALUES (1, 25, 'A', 11), 2, 25, 'B', 13), 3, 25, 'X', 5), 4, 20, 'A', 9), 5, 20, 'x', 2), 6, 21, 'A', 17), 7, 21, 'B', 1
-
Go easy on the web dev rookie here,.... I am using studio MX 2004 and I would like to incorporate a drop down menu on my nav table. (By this I mean if a user hovers over a link in the nav table, a drop down menu would be displayed to make further cho
-
error 0xc18a0001, what does this mean?
-
Ever since i have upgraded to IOS6 My connection to my BT Hub 3 wifi router keeps dropping out whenever i am streaming video. I have an Apple TV connected as well which is fine as are other devices, its just the Ipad since the move to IOS6. It is rea