How to find the Variable

Hi,
I searched in google i could not get proper anser.
my question is
how to find the varient is created are not. and also i am intrested to learn how to creat the variant...
Thanks and regards,
Kesava.

hi ,
i am intrested to learn how to creat the variant...
For creating varient just run ur program,
And enter the values into the inpur parameters or select-options.
then press the save button,
after it will display another screen which will ask about the varient name and its discription, fill it and save it,
your varient will created.
Same way u can create another varient also
how to find the varient is created are not
please refer below blogs:
[Blog1|Create variants through ABAP;
[Blog2|How to set up standard variant in ABAP report;
thanks,

Similar Messages

How to find the Variable in the form

I am having in which it is populating one forms "Display Variable"........but I don't know from where it is getting populated......Since Because there are lots of procedures and Trigger written and there are around 150 items on the forms...............i feel it litle inpractical to search for each and every item in the form..................
Please help me in searching .......how to find where that item is getting popultaed from?

I am having in which it is populating one forms "Display Variable"I could not understand this sentence...please make it clear...
but I don't know from where it is getting populated.And also this one. when it is getting populated. At the time of query or when you are opening form?
Anyway if you want to search for specific item in you code then go to Edit>Find in SQL / PL SQL and enter the field name which you want to search in your code. It will show you all the triggers where you mentioned that item in your code.
By the way hi ;)
-Ammad

How to find the variable in the Query?

Hi Expert,
I test the BEx query by the tfcode RSRT1, after exectued, Go to "Info" tab and we can see the "Variable Values" colum, however, the variable values dont show all variable defined in Query, do you know which type of varible will show in this colum? Thanks very much.
Best Regards,
Andrew

Hi,
The reason you are not able to see all the variables in query designer while they are there in RSRT1 is that:
1. Their might be some condition used in your report which need user input
2. Their might be a restricted Key Figure with restriction based on user input
In order to see all the variables in query designer available in RSRT1 report. Go to properties tab on the rightmost side in BI7 and select the Query. Now click on variable screen tab here you will see list of all the variables used in the report.
Regards
Shubh
Edited by: Shubh Karan Rathore on Nov 16, 2010 10:57 AM

How to find the value of a variable in other program

How to find the value of a variable in other program say I am in a FM and this FM is being called in from other program and I want to know some of the variable details of the program from the FM itself. Imagine if this is a txn. and I need to know the details from some of the programs while executing the same transaction
Regards
Vin

Hi Vinayak,
 you will be having your first program values in internal table or some variables,
 when you are calling the second program you wii use like this,
 SUBMIT <Second Program Name> USING SELECTION-SCREEN '1000'
 WITH s_emp(second program select-options) IN t_emp(first program variables)
 WITH p_chk EQ t_chk
 WITH p_r1 EQ t_r1
 WITH p_month EQ t_month
 WITH s_cust1 IN t_cust1
 WITH p_r2 EQ t_r2
 WITH s_cust2 IN t_cust2
 WITH s_week IN t_week
 AND RETURN.
you have pas like this to get your first program details.

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
 O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
 /↑\ Fks
 O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
 ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
 child.constraint_name fk,
 child.table_name child,
 child.r_constraint_name pk,
 father.table_name father
 from all_constraints father, all_constraints child
 where child.r_owner = father.owner
 and child.r_constraint_name = father.constraint_name
 and father.constraint_type in ('P', 'U')
 and child.constraint_type = 'R'
 and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
 and child.table_name = aux.child
 and father.constraint_name = aux.pk
 and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, IN RED):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
 identified by philips';
select granted_role bulk collect
 into cRoles
 from user_role_privs
 where username = user;
for i in cRoles.first .. cRoles.count loop
 execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
 constraint root1_id_pk primary key(root1_id)
 enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
 before delete or insert or update on philips.root1
 begin
 null;
 end;
create table philips.root2(root2_id number,
 constraint root2_id_pk primary key(root2_id)
 enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
 before delete or insert or update on philips.root2
 begin
 null;
 end;
create table philips.node1(node1_id number,
 root1_id number,
 node2_id number,
 node4_id number,
 constraint node1_id_pk primary key(node1_id)
 enable,
 constraint n1_r1_id_fk foreign key(root1_id)
 references philips.root1(root1_id) enable,
 constraint n1_n2_id_fk foreign key(node2_id)
 references philips.node2(node2_id) enable,
 constraint n1_n4_id_fk foreign key(node4_id)
 references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
 before delete or insert or update on philips.node1
 begin
 null;
 end;
create table philips.node2(node2_id number,
 root1_id number,
 node3_id number,
 constraint node2_id_pk primary key(node2_id)
 enable,
 constraint n2_r1_id_fk foreign key(root1_id)
 references philips.root1(root1_id) enable,
 constraint n2_n3_id_fk foreign key(node3_id)
 references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
 before delete or insert or update on philips.node2
 begin
 null;
 end;
create table philips.node3(node3_id number,
 root2_id number,
 constraint node3_id_pk primary key(node3_id)
 enable,
 constraint n3_r2_id_fk foreign key(root2_id)
 references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
 before delete or insert or update on philips.node3
 begin
 null;
 end;
create table philips.node4(node4_id number,
 node2_id number,
 constraint node4_id_pk primary key(node4_id)
 enable,
 constraint n4_n2_id_fk foreign key(node2_id)
 references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
 before delete or insert or update on philips.node4
 begin
 null;
 end;
-- out of the relational model
create table philips.node5(node5_id number,
 constraint node5_id_pk primary key(node5_id)
 enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
 before delete or insert or update on philips.node5
 begin
 null;
 end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
 aExportTablesPhilips utl_file.file_type := null; -- file to write DDL of tables
 aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
 aExportIndexesPhilips utl_file.file_type := null; -- file to write DDL of indexes
 aExportGrantsPhilips utl_file.file_type := null; -- file to write DDL of grants
 aExportTriggersPhilips utl_file.file_type := null; -- file to write DDL of triggers
 sDirectory varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
 cTables udt_tables; -- collection to store table names for the relational depth
begin
 -- omits all referential constraints:
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
 -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
 -- append a SQL terminator (; or /) to each DDL statement:
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
 -- create/open files for export DDL:
 aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
 aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
 aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
 aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
 aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
 select d.table_name bulk collect
 into cTables -- collection with the names of tables in the schema philips
 from all_tables t, philips.dictionary d
 where owner = 'PHILIPS'
 and t.table_name = d.table_name;
 -- execution
 sp_seeks_ddl(aExportTablesPhilips,
 aExportReferencesPhilips,
 aExportIndexesPhilips,
 aExportGrantsPhilips,
 aExportTriggersPhilips,
 cTables);
 -- closes all files
 utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips in utl_file.file_type,
 aExportReferencesPhilips in utl_file.file_type,
 aExportIndexesPhilips in utl_file.file_type,
 aExportGrantsPhilips in utl_file.file_type,
 aExportTriggersPhilips in utl_file.file_type,
 cTables in out nocopy udt_tables) is
 cDDL clob := null; -- colletion to save DDL
 plIndex pls_integer := null;
 sTableName varchar(30) := null;
begin
 for i in cTables.first .. cTables.count loop
 plIndex := i;
 sTableName := cTables(plIndex);
 * Retrieves the DDL and the dependent DDL into cDDL clob *
 * for the selected table in the collection, and writes to file.*
 begin
 cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportTablesPHILIPS, cDDL);
 exception
 when dbms_metadata.object_not_found then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportReferencesPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportIndexesPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportGrantsPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportTriggersPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
 cDDL in out nocopy clob) is
 pLengthDDL pls_integer := length(cDDL);
 plQuotient pls_integer := null;
 plRemainder pls_integer := null;
begin
 * Register variables to control the amount of lines needed *
 * for each DDL and the remaining characters to the last row. *
 select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
 into plQuotient, plRemainder
 from dual;
 * Join DDL in the export file. *
 * ps. 32766 characters + 1 character for each line break. *
 -- if the size of the DDL is greater than or equal to limit the line ...
 if plQuotient >= 1 then
 -- loops for substring (lines of 32766 characters + 1 break character):
 for i in 1 .. plQuotient loop
 utl_file.put_line(aExport, substr(cDDL, 1, 32766));
 -- removes the last line, of clob, recorded in the buffer:
 cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
 end loop;
 end if;
 * If any remains or the number of characters is less than the threshold (quotient = 0), *
 * no need to substring. *
 if plRemainder > 0 then
 utl_file.put_line(aExport, cDDL);
 end if;
 -- record DDL buffered in the export file:
 utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

How to Find the Current Instance Id in Oracle 10g

Hi,
how to find the current instance id in oracle 10g studio,
I have the below code :
if (InstanceScreenFlow.processInstance.id.id.indexOf(text : ins.id) < 0) {
/// do something
it is saying that "'processInstance' is not a function"
Thanks,
Brijesh Kumar Singh.

Why not just pass in the "id" predefined variable into your screenflow? Once you do that you'll be able to refer to it as "id.id" anywhere inside your screenflow.
Dan

How to identify the variable processing type

Hi Experts,
How to find the details of the variable whether it is filling with user exit or replacement path
Say i have a variable xxx , how to identify the above details.
Thanks,

use RSZGLOBV table in VNAM give your variable and VPROCTP will give you processing type

How to find the BADI'S in Web Dynpro ABAP

Hi Experts,
I'm new to Web Dynpro ABAP. Can any one tell me, how to find the BADI'S for standarad components like i.e DEMO_ROADMAP .Please tell me, steps/procedure to find the BADI'S in WDA.
Thanks ,
Chaitanya
Moderator message: wrong forum, please have a look in the "Web Dynpro ABAP" forum.
Edited by: Thomas Zloch on Jun 18, 2011 4:30 PM

Hi Nagaraju,
There is another fool-proof method to find BADIs while executing a transaction -
1. Goto transaction SE80
2. Select "Class / Interface", type in the class name CL_EXITHANDLER and 'Enter"
3. On the method GET_INSTANCE, create a Breakpoint just after the call to cl_exithandler=>get_class_name_by_interface at the following line -
CASE sy-subrc.
Once the breakpoint has been set, call the transaction you wish to find the BADI for and you will notice that the debugger opens everytime a BADI is about to be called. You could get the name of the BADI from the the value of the variable "EXIT_NAME".
CL_EXITHANDLER is a service class that is called by standard SAP code everytime a BADI is about to be called. So, setting a breakpoint here should let you know exactly which BADIs are called.
Hope this helps!
Thanks,
Rohini.

Reg - how to find the purpose of methods in a class

hi everyone,
           can u plz help me with how to find the purpose of methods in a class???????
a description abt the methods in a class??????
                    thx in advance,
regards,
balaji.s

Hi Balaji
Pls find some stuff.
reward pts if help.
The following statements define the structure of a class:
·        A class contains components
·        Each component is assigned to a visibility section
·        Classes implement methods
The following sections describe the structure of classes in more detail.
Class Components
The components of a class make up its contents. All components are declared in the declaration part of the class. The components define the attributes of the objects in a class. When you define the class, each component is assigned to one of the three visibility sections, which define the external interface of the class. All of the components of a class are visible within the class. All components are in the same namespace. This means that all components of the class must have names that are unique within the class.
There are two kinds of components in a class - those that exist separately for each object in the class, and those that exist only once for the whole class, regardless of the number of instances. Instance-specific components are known as instance components. Components that are not instance-specific are called static components.
In ABAP Objects, classes can define the following components. Since all components that you can declare in classes can also be declared in interfaces, the following descriptions apply equally to interfaces.
Attributes
Attributes are internal data fields within a class that can have any ABAP data type. The state of an object is determined by the contents of its attributes. One kind of attribute is the reference variable. Reference variables allow you to create and address objects. Reference variables can be defined in classes, allowing you to access objects from within a class.
Instance Attributes
The contents of instance attributes define the instance-specific state of an object. You declare them using the DATAstatement.
Static Attributes
The contents of static attributes define the state of the class that is valid for all instances of the class. Static attributes exist once for each class. You declare them using the CLASS-DATA statement. They are accessible for the entire runtime of the class.
All of the objects in a class can access its static attributes. If you change a static attribute in an object, the change is visible in all other objects in the class.
The technical properties of instance attributes belong to the static properties of a class. It is therefore possible to refer in a LIKE addition to the visible attributes of a class through the class component selector or through reference variables, without prior creation of an object.
Methods
Methods are internal procedures in a class that define the behavior of an object. They can access all of the attributes of a class. This allows them to change the data content of an object. They also have a parameter interface, with which users can supply them with values when calling them, and receive values back from them The private attributes of a class can only be changed by methods in the same class.
The definition and parameter interface of a method is similar to that of function modules. You define a method meth in the definition part of a class and implement it in the implementation part using the following processing block:
METHOD meth.
ENDMETHOD.
You can declare local data types and objects in methods in the same way as in other ABAP procedures (subroutines and function modules). You call methods using the CALL METHOD statement.
Instance Methods
You declare instance methods using the METHODSstatement. They can access all of the attributes of a class, and can trigger all of the events of the class.
Static Methods
You declare static methods using the CLASS-METHODSstatement. They can only access static attributes and trigger static events.
Special Methods
As well as normal methods, which you call using CALL METHOD, there are two special methods called constructor and class_constructor that are automatically called when you create an object or when you first access the components of a class.
reward pts if help.
deepanker

How to find the database table behind the xtags varibles?

if in xtags we find that some varibles are not having the right data coming from xml -> database tables so how can we find out the names of database table behind it .

now how to find the database table and the column name of database table from which the value of id msds is coming
Here they have stored the name of pdf file . from this code pdf file is displayed

Hi,
Thanks for your response. It is PM related. When I run a T Code - IK18, the field Total Counter Reading field appears. I am looking for that particular fields actual table name and field name. I think I have found it in IMGR table. Now I want to get IMRG-READG in my report, but there is no common fields in neither MKPF or MSEG table. So what can I do to connect IMRG table with either of them ?

How to find the profit center group for a profit center?

How to find the profit center group for a profit center?

Hi,
try this also
In order to pass the setid parameter of the FM, you have to concatenate the following things
Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
In my example below, I have declared as constants and concatenating to gv_setid.
gc_01016 is the set id for profit centers
gc_kokrs is the controlling area
gp_pprct is the Profit Center group entered in the selection screen.
You will get KOKRS value from the cepc-kokrs.
data :   gc_0106(4)   TYPE c VALUE '0106',
           gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
           gv_setid          LIKE sethier-setid,
           gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
CONCATENATE gc_0106 gc_kokrs gp_pprct INTO gv_setid.
CONDENSE gv_setid.
CALL FUNCTION 'G_SET_TREE_IMPORT'
    EXPORTING
      client                    = sy-mandt
      fieldname                 = 'RPRCTR'
      langu                     = sy-langu
      setid                     = gv_setid
      tabname                   = 'GLPCT'
      no_table_buffering        = 'X'
    TABLES
      set_values                = gt_set_values_1
    EXCEPTIONS
      set_not_found             = 1
      illegal_field_replacement = 2
      illegal_table_replacement = 3
      OTHERS                    = 4.
By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
Regards,
Venkatesh

How to find the customer exits for a particular transaction

hi
how to find the customer exits for a particular transaction

Hi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens

How to find the last executed date of any program?

<<Frequently asked questions. So search>>
How to find the last executed date of any program?
is there any system variable or function module?
Edited by: Matt on Oct 5, 2010 12:48 PM

check the transaction STAD.
Prabhudas

How to Find the Year to Date ?

Dear Experts
How to find the Year to date in BI 7.0 i.e(1st April of Current year to Tilldate) is there any Standard Variable is there ,Please let me know .as we are needed in our project.
Thanks in Advance
Satish

Hi,
I hope Stadard variables(Cumilated upto current fiscal year-0FYTCFP) will be avalable for this kind of requirement. Try to create a restricted key fig by make use of the standard variables...
This is just my assumption.
Message was edited by:
Kameswari Ponnuri

How to find the Variable

Similar Messages

Maybe you are looking for