How to find which profiles created with SU02 have a specific company code

We just added another company code.
We have company code 10 & 20
We're trying to find out which profiles created with SU02 have company code 0010 or * for BUKRS
I know that you can get that information with SUIM for field text BUKRS and it will show you all the roles or I can browse table agr_1252,
But how do I get the same information for profiles created with SU02
I just want to make sure that users that have company code 0010 cannot access company code 0020 and vice versa
Thanks a lot in advance, this will be very helpful for me
Thanks again
Joe

Hello Joe,
Solution is to be found in SUIM->Profiles by complex selection criteria. In the selectin screen uncheck the field 'Generated Profiles'
(t-code=S_BCE_68001409)
Total Questions:         58 (34 unresolved)
Please clean up your threads....
Thread locked as per forum rules.
b.rgds, Bernhard

Similar Messages

  • Profiles created with SU02 and transporting them

    We have a lot of profiles that were created with SU02.
    When I change them in our Development system and then create a transport and move the transport to our quality system and our production system the changes do not get updated.
    I manually go to each system with SU02 and make the changes again and activate them.
    Is there another way or am I missing something.
    Thanks
    Joe

    Julius,
    The TCD field isn't causing confusion.  Look to the left at that Z:MC40 or whatever.  That's the auth object, which has a field called TCD.  In other words, there isn't S_TCODE with field TCD, there's this Z:MC40 or whatever, with field TCD and the tcode in that filed is MC40 or whatever.
    Anyway, if I go through my data for S_TCODE, then I find that in the profile, it refers to the following.  Note that these are the only two profiles in my UST10S table that refers to S_TCODE.  I need to figure out how to reconstruct the rest of the profiles into roles so that the unlimited access in these profiles below can be removed and the balance of the profiles can be given relevant transactions.
    X:TCODE        S_TCODE     &_SAP_ALL
    X:TCODE             S_TCODE     S_TCD_ALL
    X:TCODE             S_TCODE     S_TCD_ANW
    X:TCODE             S_TCODE     S_TCD_BC
    X:TCODE             S_TCODE     S_TCD_CUST
    X:TCODE:ALL     S_TCODE     &_SAP_ALL
    X:TCODE:ALL     S_TCODE     S_TCD_ALL
    X:TCODE:ALL     S_TCODE     S_TCD_ANW
    X:TCODE:ALL     S_TCODE     S_TCD_BC
    X:TCODE:ALL     S_TCODE     S_TCD_CUST
    Edited by: Santosh Krishnan on Jun 30, 2010 1:23 PM
    Edited by: Santosh Krishnan on Jun 30, 2010 1:24 PM

  • How doI find which version of jave I have

    how do I find out which updates of Java SE Runtime Environment 6.0 I have installed and where do I get the latest update for my macbook pro with OS X 10.7?

    How to Check Your Java Version (MAC)

  • How to find which Restricted Key Figures are using a specific hierararchy??

    HI Experts,
      I am updating a very important hierarchy which is used in many queries and in many Restricted key figures. Is it possible to find in which Restricted Key Figures this specific hierarchy is used??
    Thanks in advance.
    Meyling.

    Hi
    I was able to find a solution
    I built a new dataset in report builder using the same table as before but tried out the "Group and Aggregate" function and for the case_ship
    field I chose "Sum" as my aggregate.... In essence this gave me a very cool and easy daliy sum of the shipped cases. 
    When I used this new dataset and built my matrix report I was able to easily get the max daily shipment for each product by week, month and
    year.
    Tom

  • How to find all Custom tables (transp) that have a custom transaction code?

    My client has asked us to provide a list of all Z (custom) tables and the associated transaction codes for maintaining them.
    I know I can manually do this with a Z* search in se11 and then do a where used on each table to find out if a view (transaction code) exists for the table - BUT THIS WOULD TAKE HOURS IF NOT DAYS TO DO AND BE LIABLE FOR HUMAN ERROR.
    Does anyone know the way we could code a search for this information (ABAP) and know what tables to use?
    Thanks.
    Scott

    Hi
    You can search in table TSTCP for custom tables that have a maintainance view and a transaction associated, which is a call to SM30. To do this, just select the table with TCODE starting with 'Z' and PARAM starting with '/*SM30'.
    But you can also have some Z tables updated by an module pool program. This is more complex to find, because you don't know if you simply have the field used in the screen for some other use in a transaction, or if it is in that screen just to update the table. In this case, you need to analyze each screen.But I hope the first tip help you to solve your problem.

  • How to find Which one is my Message Server in AIX with DB2

    Hi SAP Guru's
    PS1 is my Production system(R/3)
    in this we have 5 Applications Servers
    how to find which one is my Message Server/ Central Instance.
    Note : Enqueus Reside in MainFrame Server
    OS: AIX
    DB: DB2
    R/3: 4.7   620 Kernal Version.
    you need more information Plz. let me know
    I appriciate who gives more explanation
    Thanks & Regards,
    Kishore Reddy

    Hi Ruchit,
    cpaiss51     cpaiss51_PS1_06      PS1_D06_CPAISS51
                                 DrainBatch           15   -   -   3   5   1   -  24
                                 Normal Operations    10   5   -   3   5   1   -  24
                                 Specialbatch         10   5   -   3   5   1   -  24
                                 THDNIGHTLYBATCH      10   5   -   3   5   1   -  24
    cpaiss54     cpaiss54_PS1_06      PS1_D06_CPAISS54
                                 DrainBatch           46   -   -   3   5   1   -  55
                                 Normal Operations    34  12   1   3   5   1   -  55
                                 Specialbatch         34  12   1   3   5   1   -  55
                                 THDNIGHTLYBATCH      34  12   1   3   5   1   -  55
    cpaiss56     cpaiss56_PS1_06      PS1_D06_CPAISS56
                                 DrainBatch           46   -   -   3   5   1   -  55
                                 Normal Operations    34  12   1   3   5   1   -  55
                                 Specialbatch         34  12   1   3   5   1   -  55
                                 THDNIGHTLYBATCH      34  12   1   3   5   1   -  55
    cpaiss89     cpaiss89_PS1_06      PS1_D06_CPAISS89
                                 DrainBatch           46   -   -   3   5   1   -  55
                                 Normal Operations    34  12   -   3   5   1   -  55
                                 Specialbatch         34  12   -   3   5   1   -  55
                                 THDNIGHTLYBATCH      34  12   1   3   5   1   -  55
    cpaiss90     cpaiss90_PS1_06      PS1_D06_CPAISS90
                                 DrainBatch           46   -   -   3   5   1   -  55
                                 Normal Operations    34  12   1   3   5   1   -  55
                                 Specialbatch         34  12   1   3   5   1   -  55
                                 THDNIGHTLYBATCH      34  12   1   3   5   1   -  55
    Thanks & Regards,
    Kishore REddy

  • How to find who has created the condition records

    hi all,
    in POF1 condition records were created.for material and plant.how to find who has created condition records for the material and plant.
    is there any way to find who has created please help me out.
    thanks
    sunny

    Hi,
    There are two ways of finding the who has created the ondition record.
    01. This is through the sales order-> Item details level-> condtion Tab----> Select the condition type and click on dispaly condition record below in the same creen. Then  Goto tab on the menu and select the overview of the condition record. After do so you will have the details of diffrenr tabs. In this you need to select the Administrative data for the person who had created the condition record.
    02. Goto T. Code VK13 and give your condition type for which you need to find the person created the record. Select the header details tab for the person who had created the record.
    Hope this is fine with you.
    Bye & Enjoy SAP.
    Koganti

  • How to find which datasource is using table JCDS?

    How to find which datasource is using table JCDS?

    Hi,
    Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
    For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
    u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
    u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
    u2022     Requires the Order planned end date which is dependent on the operation  planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
    u2022     Required characteristic data and attributes of the Functional location  is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
    u2022     Required standard class  of the functional location is updating from other DSO where the  classification  data is staging with the help of different data flow.
    2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
    Status Data Flow Details:
    The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
    To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
    Required status change dates  are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
    The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
    JCDS     MANDT     =     JSTO     MANDT
    JCDS     OBJNR          =     JSTO     OBJNR
    T000     MANDT     =     JCDS     MANDT
    This DS has enhanced for the below  two fields
    1.     Order Number
    2.     Operation/Activity Number
    The Logic to populate the above two fileds is as below.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
    regards
    BVR

  • How to find which model of iPhone 5 I am using? and is that GSM or CDMA?

    How to find which model of iPhone 5 I am using? A1428 or A1429 ? Is there any short code you can dial in and check the model number ?
    And which is GSM or CDMA out of this model.

    If you purchased the phone in the US with an AT&T contract then you have the locked CDMA A1428 version of the iPhone 5. 
    At the moment and if the contract is a new contact, then you won't be able to get the phone unlocked at the moment and no, you won't be able to use it in your home country.  You will also have LTE 4G compatibility issues too and your phone will only work on 3G and also you need to remember that iPhones are only covered by country specific warranty, so it is only covered in the US, so if you go home and then have a problem with your phone, you will have to come back to the US to get it repaired.
    You need to approach AT&T about whether they will unlock your phone for you as they are the ONLY ones that can do it, but the answer to your question is no and if you had wanted to use your phone at home, then you should not have purchased it in the US.  The best that you can hope for at the moment is to use it on international/roaming.
    If you purchased your phone in the US, then it will be a CDMA phone.  You don't have a GSM phone, but GSM phones are unlocked anyway and these are the ones that are selling in Canada and the UK.
    If you have your phone on an AT&T contract then ultimately, AT&T are the only ones who can help you with any questions regarding unlocking and they are the only ones who can unlock it for you, noone else.

  • [CS6] How can I move shapes (created with paths)?

    [CS6]
    I created shapes with the pen tool.
    Then I selected the path selection tool and selected a path.
    Clicked right mouse key, choosed "Fill Path..." or "Fill Subpath"
    (don't know what it means). After filling with a color I get an object in
    the form of the path and I can move the path to another place.
    But I can't move the object in the shape of the path.
    I can't move it with "Path selection tool" because it's no path.
    Then I tried the "Move Tool" but I also can't select the object with it
    instead the whole canvas is moving.
    How can I select and move shapes which were
    created with the pen tool?

    You've drawn a Path then filled a region of a pixel layer.
    To make Shape layers, use the Pen Tool in "Shape" mode set in the Options bar.
    If you really do want to draw a Path and use it to create moveable pixel shape then do the fill with an empty layer targeted.

  • How to find which authentication used to site collection and site using powershell

    Hi,
    How to find  how-many web app, sitecollection, site used Windows authentication,claim authentication and classic, secure store authention , adfs authentication using powershell code in sharepoint 2013.
    If sites are used adfs authentication how to find which email id used for that.
    Thanks,

    Authentication is only defined at the Web Application level, and the only valid auth methods are Classic (Windows (Basic/NTLM/Kerberos)), Claims (Windows (Basic/NTLM/Kerberos)), FBA Claims, , SAML Claims (ADFS), and Anonymous.
    You can find out what authentication scheme(s) are enabled via:
    $wa = Get-SPWebApplication http://webApp1$wa.IisSettings["Default"] #replace with the zone name you're interested in
    The output will look similar to this:
    PS C:\Users\trevor> $wa.IisSettings["Default"]
    AuthenticationMode : Forms
    MembershipProvider : i
    RoleManager : c
    AllowAnonymous : False
    EnableClientIntegration : True
    ServerBindings : {Microsoft.SharePoint.Admini
    stration.SPServerBinding}
    SecureBindings : {}
    UseWindowsIntegratedAuthentication : True
    UseBasicAuthentication : False
    DisableKerberos : True
    ServerComment : SharePoint
    Path : C:\inetpub\wwwroot\wss\Virtu
    alDirectories\spwebapp180
    PreferredInstanceId : 42768054
    UseClaimsAuthentication : True
    ClaimsAuthenticationRedirectionUrl :
    UseFormsClaimsAuthenticationProvider : False
    FormsClaimsAuthenticationProvider :
    UseTrustedClaimsAuthenticationProvider : False
    UseWindowsClaimsAuthenticationProvider : True
    OnlyUseWindowsClaimsAuthenticationProvider : True
    WindowsClaimsAuthenticationProvider : Microsoft.SharePoint.Adminis
    tration.SPWindowsAuthenticat
    ionProvider
    ClaimsAuthenticationProviders : {Windows Authentication}
    ClaimsProviders : {}
    ClientObjectModelRequiresUseRemoteAPIsPermission : True
    UpgradedPersistedProperties : {}
    So on this Web Application in the Default Zone you can tell I have Windows Claims enabled, not using Kerberos (so using NTLM), and Trusted (SAML/ADFS) is not enabled, neither is Forms or Anonymous.
    Trevor Seward
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to Find Which Programs running in my Domain Computers

    How to Find Which Programs running in my Domain Computers.

    In addition, there are other third tools you can use. Here is a script from the TechNet Scripting Gallery:
    List All Installed Software
    Returns a list of all software installed on a computer, whether or not by Windows Installer. This script reads installed applications from the registry. (See Richard Mueller's comment on how to output it to a CSV file)
    http://gallery.technet.microsoft.com/scriptcenter/8035d5a9-dc92-436d-a60c-67d381da15a3/view/Discussions
    Of course that's just running it against one computer. There's also a script in the above link (scroll to the bottom) that will find installed software of a list of computers in a network and also detect the defined forbidden installed software, and
    another script that will uninstall that software remotely.
    Overall however, if you want to do this network wide with much a much easier method (although more complex to setup), I agree with using SCCM or Spiceworks. There is also Altiris, and a number of other third party solutions that you can use.
    Maybe if you can provide more specific information on the end result of the solution you are looking for, we can provide more specifics to help you.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • How to find which query taking more cpu

    Hi,
    How to find which query taking more CPU
    at a particular point of time .
    Chhers,

    Take a look at Server Standard Reports. It has a few CPU usage oriented reports.
    You can also track CPU usage by server-side tracing:
    http://www.sqlusa.com/bestpractices/createtrace/
    Glenn Berry's CPU usage query:
    SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime],
    qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count,
    ISNULL(qs.execution_count/DATEDIFF(Second, qs.cached_time, GETDATE()), 0) AS [Calls/Second],
    qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count
    AS [avg_elapsed_time], qs.cached_time
    FROM sys.procedures AS p WITH (NOLOCK)
    INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
    ON p.[object_id] = qs.[object_id]
    WHERE qs.database_id = DB_ID()
    ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
    LINK:
    http://dba.stackexchange.com/questions/52216/sql-server-2008-high-cpu-historical-queries
    Query optimization:
    http://www.sqlusa.com/articles/query-optimization/
    Kalman Toth Database & OLAP Architect
    SELECT Video Tutorials 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Why iCloud only allows store documents created by Pages, Numbers or Key Note ? How can I "iCloud" documents created with Word Mac or Excel mac??

    Why iCloud only allows store documents created by Pages, Numbers or Key Note ? How can I "iCloud" documents created with Word Mac or Excel mac??

    Oscar66 wrote:
    Why iCloud only allows store documents created by Pages, Numbers or Key Note ? How can I "iCloud" documents created with Word Mac or Excel mac??
    iwork for ios accepts for upload and also happily opens all your Microsoft office files, from Office97 standard doc/xls/ppt to the 2011 versions of docx,xlsx,pptx and various other of these format extensions.
    Notice : the upload feature in www.icloud.com is only active if you in fact own these apps on your iPhone/Pad/pod. it is not a feature of iWork for the Mac ( iwork09 ) which itself is not icloud capable at all.

  • How to find who has created the determination records for packaging instruc

    how to find who has created the determination records for packaging instructions in POF1.
    need to find the user details from POF3.
    can any one plz suggets me.

    Sunny,
    Go to POF1 click on determined record -> Display -.> enter-> F8 then -> double click on the record for which you want to see the responsible person ->click on admin. data tab here u will find the responsible person. hope u got the right answer.
    Ravi Thapliyal
    IdhaSoft

Maybe you are looking for