How to "fix" RV180/180W Certificate Errors

When I access setup on a RV180 or RV180W with Internet Explorer the following message always displays:
"There is a problem with this website's security certificate.
The security certificate presented by this website was not issued by a trusted certificate authority.
The security certificate presented by this website was issued for a different website's address."
I access the router by clicking on "Continue to this website (not recommended)."
This also happens anytime a URL filter is triggered by a client. I.e., clients do not see the "Blocked by Cisco Firewall" message unless they also click on the "Continue to this website (not recommended)." option.
What do I need to do to prevent both certificate errors?
Thanks,
Ed Ruth

Hello Mr. Ruth,
Small Business Support Community is limited to Cisco Small Business Products and this is a Microsoft Issue, not related to our Cisco small business Products. Anyway, let me share with you some information that might be helpful.
In order to fix this issue on IE, please follow the next steps:
Enter      the address below in their browser and press the “Enter”      key https://www.entrust.net/downloads/binary/entrust_2048_ca.cer
Click      the “Open” button on window below:
Click      the “Install Certificate…” button on window below:
Click      the “Next” button on window below:
Click      the “Next” button on window below:

Similar Messages

  • How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

    How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

    Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

  • Help! How to fix "Acrobat quit unexpectedly (error code: 0x00000004)"?

    Help! How to fix "Acrobat quit unexpectedly (error code: 0x00000004)"?
    Customer service ask me uninstall - restart PC - CC cleaner tool - restart PC again - reinstall, but still useless.
    Who also facing this problem?

    I already check the permission, but still can't run.

  • How to fix "1801-Microcode Update Error" in HP Compaq dc7700p Convertible Minitower

    Hello, 
    i've been reading and reading this post for a several times and i'm not sure will this work on my PC so i must ask, how to fix "1801-Microcode Update Error" in HP Compaq dc7700p Convertible Minitower i've upgraded it with E7200 instead of the original E6300
    here's Product Number: p/n RN120ET#UUZ
    I'm able to boot up and start windows i don't know is it working normaly or not, i'm just annoyed with the boot message: 
    Please HELP and Thank You in advance !!!
    This question was solved.
    View Solution.

    Hi:
    You will need to update the BIOS to its latest version to get rid of the microcode error, and the processor will only run at half the FSB speed because the BIOS update was not written to make the E7xxx processors work correctly.
    You will need to run this software each time you get into windows and change the multiplier to the max.
    Or you can run that batch file listed on the below webpage for it to run automatically.
    http://crystalmark.info/software/CrystalCPUID/index-e.html
    If I were you, I would just install a Conroe E6700 and have a problem-free upgrade.
    You will need to use the DOS based flash because I don't think there is a BIOS update written for W7.

  • How do I remove the certificat error everytime I try to access the Cisco Unified CM Administration web-page?

    Hi,
    Every time I want to have access to the Cisco Unified CM Console (System version: 7.0.1.11000-2), I use the https://10.10.x.x/ccmadmin/showHome.do homepage on my client computer, but when I open the page, I get a SSL certificate error, stating no trust to this webpage security certificate and if I those "continue to this page (not recommended)", I get access to the Cisco Unified CM Console web page.
    I have tried to add the https://IP-adress to secure web pages in Internet Explorer 7, but this to no avail, it does not help.
    How do I add this certificate to a trusted something, so I do not get this warning every time I open the page?
    Kind regards,
    Carl-Marius

    Hi Michael,
    It worked when I change the IP-address to the name that was written in the certificate, and imported the certificate to Internet Explorer.
    Thank you for your fast and very precise help!
    Kind regards,
    Carl-Marius

  • How to Fix Encore "No Disk Error"?

    When trying to start Encore CS5.0 I get an "Encore.exe - No Disk" error box.  The box says "There is no disk in the drive.  Please insert a disk into drive\Device\Harddisk8\DR8".  There are 3 buttons: "cancel", "try again", and "continue", none of these get rid of the error box and I can't open Encore.
    I've reinstalled Encore, no effect.
    I disabled a device in location 8 and the error box message changed to "There is no disk in the drive.  Please insert a disk into drive\Device\Harddisk4\DR4."  I re-enabled the device and the error box reverted to the original "...\DR8." 
    Appreciate any help on how to fix this.  Thanks.
    --Dave

    Encore "No Drive" Error http://forums.adobe.com/thread/569230 may help
    Also... Things and Software to AVOID when authoring/burning a DVD
    Start --> http://forums.adobe.com/thread/608660
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941
    Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
    Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
    When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no DVD player is required to read a burned disc, having a "good" one from a high quality blank will help

  • How to fix the field level Error(Invalid Date)

    Hi All,
    Error: 1 (Field level error)
      SegmentID: ACK
      Position in TS: 5
      Data Element ID: ACK05
      Position in Segment: 5
      Data Value: 162014
      8: Invalid Date
    can anyone help me out, How to fix above error? i searched about this but only information about the error  is given and no where it is mentioned how to fix it  and how is it generated please help me out.
    Thanks,
    Nitish

    Are you sending or receiving the EDI?
    Either way, "162014" is simply not a valid EDI data format.  Dates in x12 are expressed as CCYYMMDD so December 30, 2013 would appear as 20131230.
    If you are receiving, you need to contact the sender and have them correct the output.
    If you are sending, you need to property format that date value.  For example:
    myDateVar.ToString("yyyyMMdd");

  • HT201210 how to fix restore iphone 5 error (1)

    when i restore iphone 5 with ios 7.0.4 error (1) how to fix ???

    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • How to fix this infopath template error?

    Hi all,
    While trying to Infopath upgrade template facing this:
    "Failed to find the XML file at location '15\Template\Features\FT-01-484dec52-5c4f-8f59-0014-1f4274e530b0\feature.xml'"
    How to fix this, thanks in advance!

    Hi,
    As I understand, you encountered the issue when you upgraded template in InfoPath.
    This error can occur when the Central Admin service is on a separate server from the Web Front Ends. You can reinstall the SharePoint solution including feature with PowerShell, then
    reset IIS.
    The PowerShell script below is to reinstall SharePoint solution:
     Install-SPSolution -Identity <SPSolutionPipeBind such as Bamboo.UI.Licensing.wsp
    > -GACDeployment -AllWebApplications -CompatibilityLevel <your SharePoint level such as 15>
    The article below gives you the details about the PowerShell command “Install-SPSolution”
    https://technet.microsoft.com/en-us/library/ff607534.aspx
    The article below gives you the details about the issue.
    http://store.bamboosolutions.com/KB/Article.aspx?id=12474
    Best regards
    Sara Fan
    TechNet Community Support

  • How to fix when restore. it error 4013?

    hey guy. help me please. when i try to restore it error 4013 how to fix it please.

    See this discussion: https://discussions.apple.com/message/23183544#23183544

  • How to fix ASA problem with Error message id 713231, 713232 ?

    Dear all,
    It's been two day with this problem and it's not possible to stablish vpn with peer yet. ASA is reporting error with messages id: 713231 & 713232. Before this the vpn was working perfectly. I did a reload of the ASA, but the problem continues:
    713232    Group = x.x.158.254, IP = x.x.158.254, SA lock refCnt = 0, bitmask = 00000000, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 1, qm_secret_key_cb = 0, qm_encrypt_cb = 0
    713231    Group = x.x.158.254, IP = x.x.158.254, Internal Error, ike_lock trying to unlock bit that is not locked for type SA_LOCK_P1_SA_CREATE
    ASA 5510 version 8.3 (1)
    Is there anybody who knows how to fix this?
    Thanks in advance.

    Firstly ASA version 8.3 isn't that stable. I would advice you to upgrade to 8.4(5).
    Did you do a search in google? This is wat I found:
    http://www.cisco.com/en/US/docs/security/asa/asa80/system/message/logmsgs.html#wp4776301
    Posted by WebUser Erik Boss from Cisco Support Community App

  • How to fix "offline" and other errors on Photosmart B210a from OSX 10.7?

    I have a Photosmart Plus B201a printer connected to my network wirelessly.  I am able to print to it and scan from it via the OS using three different Windows 7 machines, but I am unable to print to it or scan from it via the OS on my MacBookPro (running Snowleopard - 10.6).  I can see it on Bonjour when I add it as a printer, but when I try to print I either get a miscellaneouse printer error, or the Mac thinks that it is offline.  I am able to access it via its webserver and can even scan there.  I am also able to print to it via the eprintcenter ... just not via the OS.  I have called Apple and they say it is a printer problem.  HP says it is an OS issue.  Anyone have any ideas?

    Dean,
    I checked the F/W
    Current Firmware Version : 1.35NA
    Current Firmware Date : 2010/11/12
    Check Online Now for Latest Firmware Version :Check Now
            This firmware is the latest version.
    I changed my wireless to "2.462 GHz - CH 11"
    I did a "Reset Printing System" and then tried to readd my printer.  In order to get this to work, I had to go to use the printers webserver and disable Bonjour, apply, and then enable Bonjour, apply.  After this I was a ble to readd the printer and print a document.  I then tried to print a second document, and I got "printer ofline".  So I tried the disable/enable Bonjour trick and then paused and then restarted the printer and my second document printed.
    I do not want to have to go through all of those steps to get each document to print so I hope that with this information you might have an idea of how to fix this.
    BTW, thanks for the help and attention so far ... I do appreciate it.
    - Lowell

  • How to fix "1801-Microcode Update Error" in HP Compaq dc7600 Minitower

    Dear Sir,
    I am using hp compaq dc7600U  with pentium (R) 4 3.00 GHz. processor. When I changed the processor with Pentium D 3.4 GHz. processor I found a message " 1801 Microcode Update error" Press F1 to continue. After pressing F1 computer works normally. I want to know that how I can remove this error message. 

    Please see my reply to your other post at the link below...
    http://h30434.www3.hp.com/t5/Desktop-Hardware/how-to-fix-quot-1801-Microcode-Update-Error-quot-in-HP...

  • How to fix this Designer Workflow error?

    Hi All,
    I am facing below error while trying to publish designer 2010 worflow:
    (0, 0) Activity 'ID18' validation failed: An IfElseActivity must have at least one child of type IfElseBranchActivity.)
    How to fix this issue?
    Thanks in advance!

    Hi Sam,
    This error is due to the if - else branches. Hope you might be using in your workflow.
    Designer workflow doesn't accept multiple Else If conditions. Modify the workflow to have 'If - Else If' and then try to publish. In other words 'If' condition should have only one 'Else If' condition.
    Note: 
    after modifying the workflow, save and close the designer. Clear the cache at the following folders and then open designer and publish the workflow.
    C:\Users\loggedin-id\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache  OR  
     %AppData%\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache<o:p></o:p>
    C:\Users\loggedin-id\AppData\Local\Microsoft\WebsiteCache   OR
        %AppData%\
    AppData\Local\Microsoft\WebsiteCache
    C:\Users\loggedin-id\ Roaming\Microsoft\Web Server Extensions\Cache   OR    %AppData%\Roaming\Microsoft\Web
    Server Extensions\Cache
    Thanks
    Senthu
    please mark as 'Answer' if it resolves your query or 'Vote' if this post is helpful

  • How to fix Itunes message Windows Error 126

    Can someone tell me how to fix this problem. Tried to upgrade itunes and keep running into problems with this Windows Error 126. I have uninstalled, reinstalled and same thing over and over.  Can someone give me an easy fix please?  I'm trying to sync my Ipad and this is very frustrating.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Maybe you are looking for