How to fix wireless apple keyboard that ceased pairing with imac at the same time the keyboard on my ipad2 disappeared right after I updated osx vs. 10.8.5 sent out by Apple

I updated to OSX vs. 10.8.5 sent out by Apple on Oct 4,2013. My wireless
Apple keyboard is no longer paired to my imac and at the same time I noted that the keyboard on my ipad2 no longer exists. At first I thought it was an icloud issue but am wondering if anyone else has experienced this problem.

I downloaded 10.8.5 Supplementary and this time there was a picture of my keyboard with the suggestion that I power it on, which I did many times. Finally re-booted my imac and shut down BlueTooth on my ipad. I now have a keyboard back on the ipad and my wireless keyboard on the imac is working.

Similar Messages

  • I recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

    i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue continues, take the device to Apple for evaluation and possible replacement.

  • How can I verify credit of an itunes card that has already been redeemed?  My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

    How can I verify credit for an itunes card that has already been redeemed?  My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

    Have you checked the account's purchase history to see if anything could have used up the balance : See your purchase history in the iTunes Store - Apple Support ?
    If there aren't any purchases then try logging out and back into the account (e.g. on your iPad tap on your id in Settings > Stores and then log back in) and see if a balance then shows on it. My account's balance shows at the top right of the store's page on my computer's iTunes, by clicking on my name towards the top right of the iTunes screen, and by logging in to view my account via the Store > View Account menu option. On my iPad devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > Stores and it should show on the screen that you are taken to)

  • How to use at the same time the audio sounds of a keyboard & the midi sounds with mainstage

    Hello! hope you can shed some light on my problem! I want to be able to use at the same time the real sounds of korg sv-1(stage keyboard, but it could be any stage piano with USB midi) and use other sounds from mainstage. Of course i switch between patches and sets with a footpedal so i can be quick with my changes of sounds so I try to keep my hands on the keys.
    My question is: Is there a way that one moment for example i have a silend patch (from mainstage) and the real sound i want passing through audio and the next moment silence from korg and the next patch a sound from mainstage? Or even combine them. I mean in general how am I able to integrate the sounds I prepared and organised in patches in mainstage with the beautiful piano & rhode sounds of my sv-1?
    thanx in advance for your response!

    Yes. To have a silent Mainstage patch, simply do not create any instrument channel strips. To have the SV-1 silent on a patch you should be able to set and save the volume for that patch to 0. As an alternative you could turn local off on the SV-1( this function will reset to local on after the SV-1 has been turned off). With local off you can determine with each Mainstage patch whether or not you want to transmit MIDI to the external instrument(SV-1) channel strip. If you have local on, be careful not to create a MIDI feedback/loop with the SV-1. This is a lot of info to digest at once, so take it slowly, step by step. Snapshots below are somewhat in order.
    Click on the cog wheel in the upper right corner of the channel strips section to get to this menu. Select add external instrument channel strip.
    The external channel instrument strip will look like this.
    Click on the MIDI output box to show the display below and choose your external keyboard destination(SV-1).
    In the channel strip inspector you can send patch changes to the SV-1.
    Here is where you select the MIDI input for routing MIDI to the SV-1. If want no SV-1 sound for this Mainstage patch, select none.
    You'll need to play with these parameters to get the desired results. Stepping through the MS patches with a footswitch can be done, too, but that can wait for now. Post another question when you master these steps.

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

    When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

    Have you ever even used skype on an iphone or ipod?  We tried it and there is no way to type to each other while you are video chatting.  You can do the typing during the video on a COMPUTER, but not on an iphone or ipod.

  • Apple Wireless Keyboard won't pair with iMac...

    I just bought a new 27" iMac and had customized and shipped from Apple (didn't buy it off the shelf in the Apple Store).
    When the new iMac got here today, I connected it to my aftermarket (wired USB) keyboard and trackball. It works fine.
    My problem is that I need to use my old iMac for several days while I get files off of it, etc. (don't want to use migration assistant). My old iMac is last year's 24" model.
    When I start my old iMac, it comes on and brings up a "Bluetooth Setup Assistant" window and starts automatically searching for a bluetooth keyboard. I read the instructions online, and powered-on the Apple Wireless Keyboard that came with my new iMac. I powered on this new keyboard, and my old iMac starts to recognize it (it says "Attempting to connect to keyboard"), but then says there has been an error, and doesn't recognize it.
    The instructions online say that when I power on my Apple Wireless Keyboard, the green light on it should start blinking. It doesn't. It just comes on for about three seconds and goes off.
    What's wrong? I need to get my old iMac to recognize this keyboard. I can't even safely shut if off if it doesn't. Could it be that it was already paired to the iMac it came with? I've replaced the batteries, and still it doesn't work. Please help!
    Thanks!

    Well, of course that had occurred to me. But I need to use both computers at once for a while, and I only have one wired, USB keyboard.
    Anyway, I eventually got it to work. I still don't know what the problem was.

  • Connecting bluetooth keyboard that is used with imac to macbook

    is it possible to connect my wireless keyboard and mighty mouse to my macbook when the wireless keyboard and mouse have been paired with my imac? if not, how do i reset the keyboard and mouse to be recognized with my macbook?

    Sure. Just pair the keyboard and mouse to the MacBook using the Bluetooth Setup Assistant, just like you did when you got the iMac.

  • Wireless Keyboard Will Not Pair With iMac

    After installing Security Update 2007-007 and Pro Applicatiion Support 4.0.1 my wireless keyboard stopped being recognized by my computer. When I run my Bluetooth Setup Assistant it sees my keyboard but I can not pair it. I even installed new battteries in it thinking that was the problem. I had a brand new never used wireless keyboard in the closet which i got out and installed batteries in it and it will also not pair with my iMac. Any sugggestions will be greatly appreciated since I am stumped! Oh, my wireless mouse is working fine.

    The model number is M9270LL/A (its the one that comes with the iMac). When the screen comes up and asks for you to enter a set of numbers to pair with the computer and I type the nembers on the keyboard I then receive an message that an error has occured. I try and try again to pair the keyboard to the computer with the same results. Thanks.

  • While downloading many videos at the same time, the download window shows that the video has completed downloading while it has actually downloaded only a little of each. How can i correct it??

    The download bar will be full while the video has still not downloaded fully. Downloading will be stopped and whatever content downloaded can be viewed.

    @kalos
    Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
    No pulseaudio --kill command so I couldn't run.
    Checked systemd journal and there is no mention of PA this time.
    Checked top, and grepped ps aux and there is no PA there either.
    I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
    _ vlc Videos/anime/fmab/01.mp4
    VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
    [0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
    [0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    [0x7fb604001248] main vout display error: Failed to resize display
    But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
    @nomorewindows
    I see. That's too bad. At least we're not alone.
    Last edited by Greduan (2014-11-14 01:34:29)

  • How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

    How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

    Hello, lustige luka. 
    Thank you for visiting Apple Support Communities. 
    The Personal Hotspot feature using USB  should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled.  Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue. 
    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/ht4517
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756
    Cheers,
    Jason H. 

  • Problems with magic mouse and wireless keyboard at the same time

    I have a Macbook pro 15" mid 2009, with lion 10.7.3, i bought a magic mouse and small wireless keyboard Apple, but when i'm working with both devices at the same time, the magic mouse begin to do something wrong, the left click work as left click, and  i have to turn off the keyboard, wait for a while and then the mouse work good, the keyboard work good alone and mouse too, but at the same time no.
    What do you think about rarely issue?
    Thanks.

    Hello:
    Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
    Barry

  • How to let user download multi files at the same time in WebDynpro ABAP?

    hi all:
    As you know, WeyDynpor has provided upload/download UI element, but it seems that it only support one file upload/downlaod at the same time.The following is the API method to download one file in Webdynpro:
        cl_wd_runtime_services=>attach_file_to_response(
         EXPORTING
           i_filename      = lv_filename
           i_content       = lv_content
           i_mime_type     = lv_mine_type
           i_in_new_window = abap_true
           i_inplace       = abap_false
    *      EXCEPTIONS
    *        others          = 1
    but if when use click one button, we want to provide user a html file plus 2 icons files which are used as this html file's resource file, then how to let user download these 3 files together at the same time?
    one simple way is calling the download api (cl_wd_runtime_services=>attach_file_to_response) 3 times,
    but it is very ugly that three popup windows are shown to let user select every file's download path, which is unaccepted.
    So anyone know more convienient way to handle it?
    thanks.

    Hi,
    I suggest you to zip the files and attach it to the response. Do the add file part for each of your files
         "References
         DATA lr_zip TYPE REF TO cl_abap_zip.
         "Variables
         DATA lv_zip_xstring TYPE xstring.
         DATA lv_zip_name TYPE string.
         DATA lv_file_content TYPE xstring.
         DATA lv_file_name  TYPE string.
         "Create instance
         CREATE OBJECT lr_zip.
         "Add file
         lr_zip_attachments->add(
           EXPORTING name = lv_file_name
                  content = lv_file_content ).
         lr_zip_attachments->save( RECEIVING zip = lv_zip_xstring ).
         "Attach zip file to response
         cl_wd_runtime_services=>attach_file_to_response(
           EXPORTING i_filename      = lv_zip_name
                     i_mime_type     = 'ZIP/APPLICATION'
                     i_content       = lv_zip_xstring ).

  • How do i start video and audio at the same time in ios

    How do i start video and audio at the same time in ios?
    I have tried a lot of different ways but i cant figure it out?
    I can get the sound and animation (timeline) to start playing.
    There is no problem to start the video and the animation at the same time.
    But i cant get both the video and the audio to start playing when i press a button.
    It works great in OSX and on windows?
    Here is an example:
    // insert code for mouse click here
    // Play an audio track
    sym.$("_1")[0].play();
    // Play a video track
    sym.$("host")[0].play();
    // Play the timeline at a label or specific time. For example:
    // sym.play(500); or sym.play("myLabel");
    sym.play("marker1");

    If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

  • How to play more than 2 audio at the same time in a page

    I worked for interactivity book's page in Hype and I inserted two audio in a page
    One is background music played when page opend, Other is effect audio that played when touch the object.
    i added this widget in ibooks author.
    In ibooks-author on mac, i can hear two sound well. but in ibooks on ipad i got the problem..
    When i touch the object and play effect sound, background audio is stopped.
    Moreover, after effect sound ended then bgm is not played.
    i hope to hear two sound at the same time on ibooks, if not, play bgm continue after effect audio over.
    plz answer this problem.. T.T

    I got the same problems! I can't play multi audio at the same time. Would you mind letting me know the detail of how to deal with this problems.
    Regards,

Maybe you are looking for