How to Flash f/w with Windows 7 32 bit

Hi,
If you have windows 7 and want to flash the phone with latest firmware then do the following.
Now you have to select the properties of flasher exe file and make it run in Windows xp service pack 3 compatibility mode and then do the below mentioned it works soomth.
Source: http://wiki.maemo.org/Updating_the_tablet_firmware
In order to flash directly from the XP/Vista/Windows 7 command line, follow these steps:
Download and install the latest version of Flasher e.g. maemo_flasher-3.5_2.5.2.2.exe
Download the latest firmware (.bin) file and save it to %ProgramFiles%\maemo\flasher-3.5\ (the default installation path for Flasher) or to the custom path of your choice.
Ensure the battery is at least half full.
Unplug charger cable and switch off the device.
Open the Command Prompt (Start then Run or Windows Logo key + R) and type cmd then press Enter.
Change the directory to the Flasher's path (TIP: Use the TAB key to auto-complete the commands and file-names)
cd "%ProgramFiles%\maemo\flasher-3.5"
Hold the u key on the keyboard and connect the USB cable at the same time (details on the wiki)
Run the following command:
flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin -f -R
Replace RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin with the firmware you wish to update.

srinivas wrote:
Sorry for confusion ,
My question is what changes i need to do in code or while making the installer to make the existing program work with other Windows operating system
You need to make sure the machine have the corresponding NI-VISA installed. Check in the NI software pages for the right version.
Also make sure that the com port's can be selected when you first start the application. Eg. if you refer to VISA "COM1" on the XP machine It might be "COM2" on the Win7 machine.
Br,
/Roger

Similar Messages

WHY is it that you cannot fix (completely so you never have to come back to it again) how adobe flash player works with windows 8.1?

Hi,
I would like to start a discussion on how one of the "leading" software companies in the WORLD cannot provide a better way for their software (which I assume they want everyone to use) to be used in conjunction with windows 8.1. ADOBE no longer provides support for those who don't pay to be here, they don't have a reasonably intelligent way to fix problems for non computer minded people, they want you to go through and change this setting or that (ya, I've seen the page and done the crap they tell you to do to fix the flash player so it works and... it works... for a little while then you wind up with a fkn green screen after another day or two... this is complete BS you shouldn't have to unfk things so they work every few days... you shouldn't have to deal with crap like this... I AM GOING TO USE VLC PLAYER OR SOMETHING ELSE TO TAKE CARE OF MY VIDEO PLAYER NEEDS IN MY DIFFERENT BROWSERS FROM NOW ON... YOU GUYS SUCK, YOU HAVE NO SUCH THING AS SUPPORT ANYMORE AND YOU ARE OBVIOUSLY MOVING BACK INSTEAD OF FORWARD IN THE INNOVATION DEPARTMENT!!!!)
1. this should be simple, install the software, install an update if the software is installed and up to date it should work... don't make me fiddle with all the extra bs, your the software developer why cant' you do that????
2. you tried to make it easier by making it so flash player is imbedded in my browser, congratulations you made it screwed up... think of it this way, now I have to get rid of your software to have something malleable I can deal with... your software doesn't work half the time, i'm sick and tired of dealing with it... i'm not going to deal with it anymore, I have changed the settings as directed on your help page and it worked.... for a freakin DAY, then I get green screens when I try to use it the very next day... so... I undo the changes I made the previous day... and redo the changes AGAIN and it works AGAIN.... FOR A FKN DAY!!! WTFO!!!! this is complete and total bs, your idea to make things simpler made things more complicated, more labor intensive, and more of a pain in the azz for the rest of the world... SO I am going to find a way to not have to deal with ADOBE anymore!!! screw you adobe, screw your software, screw your lack of support. you have nothing to offer me that I cannot get elsewhere with less drama, I hope your business crashes like your software... have a nice day!

One of my programs needed Flash Player and downloaded it for me! So, Problem solved. Thanks to all who are reading this. I would delete it if I could.

How does adobe encoder work with windows 8? I can't get it to work.

How does adobe encoder work with windows 8? I cant get it to work.

Flash Media Live Encoder doesn't work with Windows 8.
The best it gets is Windows 7 64 bit.

How do I install itunes with Windows 7?

how do I install itunes with Windows 7? I always get a Windows Installer error or administrator error __

Have tried: download but do not install iTunes, then turn off virus protection and firewall, restart computer, login as admin, then run the iTunes insallation. After it installs, restart virus protection and firewall and logout and back in as standard user.
Windows leaves installers running or still resident which conflict with the iTunes installer.

How do i install indesign with windows 8 on a pc

how do i unstal indesign with windows 8 on a pc?

Visit this page please: http://www.adobe.com/products/indesign/buying-guide.html and then on the right hand panel of the page you will find InDesign Annual plan to Join Adobe Creative Cloud to leverage the most updated features of InDesign CC. When you've purchased it, you'll be able to download the software through Adobe Download Assistant as a electronic download that you can save to your desktop or any other location. You can then doubleclick the installer executable to proceed with installation and activation later on as the installation completes. If you're having another version of InDesign (older version ) then please let me know if you already downloaded the installer and then waiting to install it on your Windows 8 PC.

How to open pages documents with windows vista

Does anyone know how to open pages document with windows vista? i saved it onto a usb stick but when i tried to open it on the computers in my university which support windows vista, it didnt reconise the file and opened with a page of question marks!!!! Im panicking now!!!!!
Id appreciate any help!!! thanks!!!!!

beckstarr wrote:
Does anyone know how to open pages document with windows vista? i saved it onto a usb stick but when i tried to open it on the computers in my university which support windows vista, it didnt reconise the file and opened with a page of question marks!!!! Im panicking now!!!!!
You cannot open it on Windows Vista. The only application in the world that opens a Pages document is Pages, and it is Mac OS X only.
Your options:
1. Find a Mac with Pages installed, and save the document as doc or pdf, which you can open on Vista.
or, if that is impossible,
2. Open the files in a texteditor like Notepad.exe on Windows and try to piece text fragments together to get at least part of your original text back. The images should also be available somewhere, even though all formatting is gone.

HT1600 how to connect appel tv with windows 7?

HI how to use appel tv with windows 7???

Turn on home sharing in iTunes and stream (same network and apple id). If you want to mirror your pc you need a programme like reflectorapp or airparrot (www.airparrot.com) to do it, a third party app.
regards
jules

How can I run MP350 with Windows 8.1 computer? Works OK with Windows 7 machine. Need drivers.

How can I run MP350 with Windows 8.1 computer?
It works OK with Windows 7 machine, using drivers from original CD.
Windows 8,1 machine doesn't find those drivers (which I copied to its C drive).
It doesn't find needed drivers on the internet.

Hi Larry-R,
I see that you made a later post regarding this. Please refer to the answer on that post regarding your inquiry.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I currently have a PC with Windows Outlook. If I add an iPad to the mix, how does the iPad interface with Windows Outlook?

I currently have a PC with Windows Outlook. If I add an iPad to the mix, how does the iPad interface with Windows Outlook?

Isn't Outlook simply an email client or a software application on a computer? You can add an email account - whatever email provider that you use - right on the iPad. You can sync your Outlook contacts and calendar if that is what you are asking about, but Outlook itself has nothing to do with the iPad.
Message was edited by: Demo

HOW TO DUAL BOOT W540 with windows 8.1 / 7

I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for PLC programming software which only support windows 7). so i need to have a windows 7. i prefer to keep my windows 8 and have dual boot system with windows 7 added. But i can't install windows 7. initially due to disk type (GPT), then i changed it to MBR without losing my files (which only was possible if i had deleted the recovery partition- now my recovery is on my flash drive). But there are already 4 partitions on the system (1 for C: drive and 3 for recovery and system files which came originally with the product) , how can i install a windows 7? i can't add another partition because that makes my disk a Dynamic disk (which i don't really know what is). all in all, i really need windows 7 on my system ASAP. If anyone know how to fix this please reply. Thanks guys.
Solved!
Go to Solution.

You are limited to four PRIMARY partitions on an MBR disk.
But other than the "active" partition (i.e. the small 100MB "system reserved" partition where Boot Manager is placed from doing a cold Windows install on an empty drive, or the 1.4GB equivalent Boot Manager partition that Lenovo provides along with other tools and utilities), all other partitions on the drive can be "logical". They are not required to be PRIMARY, although Lenovo delivers its partitions that way. But you can change that.
You can have up to 120 LOGICAL partitions on a drive (all of which live inside an originally PRIMARY partition which gets converted to an "extended partition" which houses all of the logical partitions. So if you have at least one logical partition (and thus have to give up one primary partition in order to build that required "extended partitions"), that means you can have up to three remaining primary partitions and up to 120 logical partitions... all on an MBR disk. No "dynamic", and no GPT.
Yes, that means even the Windows system partition itself (i.e. "C") can be on a LOGICAL partition. It's only that one "active" partition (where the BIOS goes to find Boot Manager and its menu, and kick off the rest of the system boot process) which truly must be PRIMARY. That's the only requirement.
So, if you want to use MiniTool's Partition Wizard to carve out sufficient free space for your second Windows 7 partition (by shrinking your existing Win8 partition), you can create one or more logical partitions inside that new free space, and do the Win7 install to one of those empty logical partitions. You can then use a second logical partition in that same free space for "data", if you want.
Note that Partition Wizard can even convert one of your existing primary partitions to logical (i.e. convert it to an "extended partition", inside of which will be then be the original primary partition now converted to logical). You can then shrink or move/resize the partitions on the drive (both primary and logical) however you want, to perhaps make room for additional "logical" partitions inside of that now present "extended partition" which can hold up to 120. You can even convert ALL of your primary partitions except for the one "active" partition (which MUST BE PRIMARY) to logical partitions, which gives you maximum flexibility in having even more than just two bootable OS's along with one or more data partitions, etc., up to 120 logical partitions... plus the one "active" primary Boot Manager "system reserved" partition which must be kept.

Flash Player integrated with Windows 8 has stopped working...can't seem to upgrade to newer version Flash Player ?

One day watched videos with no problem. Next day, can't watch videos! Site says I need Flash 10.0 or higher. When I try to check what version I have, it says that Flash player is integrated with Windows 8, no need to install Flash Player. I am thinking that there are newer versions of Flash Player than what is integrated with Windows 8, but it's like I'm going around in circles, can't seem to upgrade to a newer version.

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

How do i find ITunes with windows 8. i went to the website to download itunes and it says thank you for downloading but i can not find it in my computer

I have gone to itunes and downloaded it for my computer. My computer runs windows 8. the web site tells me thank you for downloading but my computer doesnt not have it nor can i locate it. it didnt even ask for my permission like it does with everything else that i download. Question is how to I get it with windows

Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

How to use trackpad gestures with Windows 8 Developer Preview?

I have installed a Windows 8 Developer Preview on my MacBook via BootCamp Assistant. I found that it isn't support the trackpad gestures! (ex: two-fingers tap to right-click)
So how can I use the trackpad gestures with Windows 8?
Thank you for all reply.

The BootCamp drivers that you can download and burn to a disc via the Boot Camp application in Mac OS can be installed in Windows 8 (run setup.exe from the disc while in Windows 8, preferably by right-clicking and choosing "Run as Administrator") and will allow you to use all of the current features of the touchpad (including two finger clicking/tapping). Once you have installed the drivers as described above, you can then click on the arrow in the System Tray and right-click on the black triangle that is for the BootCamp control panel. In those settings you can change how the touchpad responds to your taps, clicks, etc.

How to do HTTP getRequest() with windows NTLM authentication from OBPM..??

Hello All,
Please share your expert ideas how me can do HTTP getRequest() with windows NTLM authentication from OBPM..??
I am not sure even whether its possible or not, if not what could be the alternative way to do integration with MS SharePoint ??
Version : Oracle BPM v 10.3.1
Cheers
Parveen Jaswal

You are only as secure as web browsing to the LogMeIn website is (which appears to use HTTPS). If your login on that site is compromised, they will have a list of your computers that they can attempt to connect to. As long as you don't save the login credentials, they would then also need to know what username and password to use to connect to the computer. Granted, a little social engineering, and they could probably get some good ideas what to try for those, but if you chose to make your computers secure with complex and hard to guess passwords then it should be fine.
I've been using LogMeIn from my Mac to my mom's Windows XP system from July 2009, and to my wife's Thinkpad running Win 7 since Oct 2009. None of the computers involved have had any security issues at all, let alone any caused by LogMeIn. For my wife's PC, it sits behind our NAT Firewall in our LinkSys Router (although I did have it behind a CheckPoint VPN Edge router for a while). My Mom's PC sits behind a Netgear Router providing its NAT Firewall. When my Mac isn't at home, it's generally behind that CheckPoint VPN router at my office now. It all works nicely from behind one router to behind another. The Piece that you install on the PC will log it into the LogMeIN website and that is how it gets through the router to the PC. You login to the website, select the PC to control, then login to that PC.

How to install ubuntu along with windows 7

I have HP 15-r062TU. In that i am install windows 7 64bit os. Now i would like to install ubuntu 12.04 or 14.04 LTS os along side windows 7.
For first booting from usb/cd-rom it shows along side with windows after hitting continue button it reboots from the begin and starts all stages and shows without alongside with windows option during installation.
Please help me. Thanks in advance.
I made a mistake that i was completely removed ubuntu operating system includeing HP_Tool hard disk partion also from pre installed ubuntu os.

Hi,
Please use the following instructions:
http://www.dedoimedo.com/computers/dual-boot-windows-7-ubuntu.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to Flash f/w with Windows 7 32 bit

Similar Messages

Maybe you are looking for