How to force the bookmark tree to autoexpand upon open

If I add bookmarks to a PDF via Acrobat, the PDF opens with all bookmarks expanded (on the bookmark panel).
Now, I am using LCES AssemberServices to build a PDF with bookmarks. Everything works fine but that PDF opens will the bookmark tree collapsed to the first level.
Is there a trick, a special parameter/property/attribute on the DDX or Bookmarks so the result PDF opens with the bookmark tree fully expanded? I could not find anything in the documentation.
TIA
Julio

I did some further research on the behavioral differences between an Assembler build PDF bookmarks and ones added thru AcrobatPro and noticed something very strange.
When I open the Assembler built PDF with Reader (9), the Bookmarks Action->"Expand Top levels bookmarks" does nothing, nothing gets expanded. It works when you manually expand a node, but not when you ask Reader to expand them all.
If I take the exact same PDF with AcrobatPro (9) and add a new bookmark deep down into one of the bookmarks tree branch I get this:
- the document opens with the entire tree containing that bookmark already open
- the expand/collapse top level actions work only on that part of the tree and even weirder, the tree opens to the new bookmark level, no matter how deep it is
- it is as if none of the Assembler built bookmarks bear any 'level' info, and are thus ignored by the expand/collapse commands.
Does that indicate something I'm not doing right?
cheers,
julio

Similar Messages

How do I restore the Recent Tabs item to the Bookmarks tree? I accidently deleted it.

How do I restore the Recent Tags item to the Bookmarks tree? I accidentally deleted it.

See:
*https://support.mozilla.org/kb/Restore+the+default+Smart+Bookmarks+Folders
Or create a new bookmark:
Name: <b>Recent Tags</b>
Location: <b>place:type=6&sort=14&maxResults=10</b>
Close and restart Firefox.

How to construct the component tree in my custom component?Help!

Hi, i am writing a custom component like this:
public class HtmlCategory extends HtmlPanelGrid
     public void processRestoreState(javax.faces.context.FacesContext context,
            java.lang.Object state)
          setColumns(1);
          HtmlCommandLink link=new HtmlCommandLink();
          link.setValue("Let's Bingo");
          MyUtil.setActionListener(context,link,"#{temp.mytest}");
          UIParameter param=new UIParameter();
          param.setName("name");
          param.setValue("Robin!");
          link.getChildren().add(param);
          param.setParent(link);
          getChildren().add(link);
          link.setParent(this);
          super.processRestoreState(context,state);
}         you see, i want to construct the compont tree at Restore View phase this way,because the structure of the component tree will always be the same, so i don't the user to write extra code.
But the children of the component are not rendered,the renderer of the HtmlCategory component just extends the HtmlGridRenderer(myfaces) directly,and always calls the "super" methods in the encode methods of the renderer.
I got a message from the console:
Wrong columns attribute for PanelGrid id0:id4: -2147483648
but i have set the columns attribute in the code above, so what's happening? or please give some advice about how to render the component tree by myself in Restore View with the tree constructing code in the custom component class code,just lke the code above.
Best Regards:)
Robin

Well, i don't know if i have got my question clear.
usually, according to the tags you use in the jsf page, a component tree will be created at the Restore View phase,for example:
<f:form>
<h:panelGrid ...........>
          <h:dataTable ................>
          </h:dataTable>
   </h:panelGrid>
</f:form>but because i am writing a component for my web app, all the child components and their attributes are not likely to change. so i want to reduce the tags into one custom tag, and construct the component tree internally by myself.But it is not the case of backing bean.So i wrote the the code in the method:
public void processRestoreState(javax.faces.context.FacesContext context,java.lang.Object state)as it is shown in my orginal message.But it seems that it is not right way to construct my component tree.So where should i put the code that construct the component tree?Overriding the method :
public void processRestoreState(javax.faces.context.FacesContext context,java.lang.Object state)is not the right way?
Best Regards:)
Robin

How to delete the bookmark in chm lite apps in iPad air iPad, iOS 7

How to delete the bookmark in chm lite apps in iPad air
iPad, iOS 7

This is a Safari Bookmark?
Bring up the list of bookmarks
tap edit, from the bottom right of list
tap the - sign next the the bookmark you want to delete.

How to delete the bookmarks in chm lite apps in iPad air

How to delete the bookmark in chm lite apps in iPad air

This is a Safari Bookmark?
Bring up the list of bookmarks
tap edit, from the bottom right of list
tap the - sign next the the bookmark you want to delete.

How to force the "Bluetooth Communications Port" to be one of COM1 to COM8 ports?

Dear Lenovo Community, Happy Holidays to you all and wish you a great happy new year. Recently purchased a Bluetooth OBDII device and have difficulty making it to work with its provided software on my T61 (running original XP Home). My short story and question/problem is that I can open "My Bluetooth Places" and pair with the OBDII device as an "OBDII SPP Dev", but my T61 assigns serial port COM19 to it. The OBDII software which came with the device only can let user set to one of the COM1 to COM8 ports and in the properties of Bluetooth pairing, there is no way that I can select which COM port to use. I looked at the Device Manager and I do see these COM port assignments: COM4,5,6,7: Sierra Wireless (the HSDA modem in the laptop which I have never used BTW) COM 9,10,11,12,13,14,15,16,17: Bluetooth Serial Port COM 18, 19: Bluetooth Communications Port and I don't see anything for COM1,2,3, and 8 My question is how to force the computer/OS to assign one of the COM1 to COM8 ports to my device upon pairing? Can I disable the Sierra Wireless model from the COM ports list and hope this will happen? Thanks for your help and inputs beforehand. Regards, AL

Hi, AL_K
Have you attempted to change the port number in device manager itself? If you navigate to Device Manager and open the list of Ports, you can right-click on the device you wish to assign a different port number. After right-clicking, click Properties. There should be a tab called Port Settings. In here, you should find a setting to manually assign a port number.
Good luck, and let me know how it goes,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

How to get the current tree element (node/childnode/childnode/...) ?

Hello!
I'm trying to create a kind of a navigation tree for my application.
It should represent some elements of an XML structure and some other nodes for other options.
The binding with the context is not a problem, I can create the tree up to all the levels I want to.
The problem now is, that I don't know, how to get the "current tree element", when there is any action.
For example:
public void onActionSelect(...) {
String test = wdContext.currentTreeNodeElement().getText();
wdThis.wdGetContext().currentContextElement().setSelectedElement(test);
With this method I can get the text of the "first level nodes". If I want to get the "second level node", I can do
String test = wdContext.currentTreeNodeElement().currentChildElement.getText();
..and for the next levels so on.
Isn't there any general method to get the information of the selected element without knowing before, whether it is a nodeElement or a nodeElement.currentChildElement or a nodeElement.currentChildElement.currentChildElement, ...?
Greetings,
Ramó

Hi,
if you following that pdf ,
i think your not implemented the below code in DomodifyView method
if (firstTime) {
      IWDTreeNodeType treeNode = (IWDTreeNodeType) view.getElement("TheNode");
      /* The following line is necessary to create parameter mapping from parameter "path" to parameter "selectedElement".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onAction event. Parameter "selectedElement" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onAction. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
      treeNode.mappingOfOnAction().addSourceMapping("path", "selectedElement");
      /* The following line is necessary to create parameter mapping from parameter "path" to parameter "element".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onLoadChildren event. Parameter "element" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onLoadChildren. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
      treeNode.mappingOfOnLoadChildren().addSourceMapping("path", "element");
please cross check once.
Thanks,
Ramesh

How to refresh the ALV Tree

Hi,
I have an ALV Tree report developed using the OOPS. In my ALV Tree output, I have some buttons which will update the database after clicking. The data is correctly updating in the database. But, it is not getting updated in the ALV Tree display. That means, it is not REFRESHing the ALV Tree display. We have to again execute the program in order to see the updated output.
Could anyone please suggest me how to Refresh the ALV Tree display..?
We can't use the method 'REFRESH_TABLE_DISPLAY' as it is a PRIVATE method is the class CL_GUI_ALV_TREE.
Please share your valuable thoughts.
Thanks & Regards,
Paddu.

Hi paddu.
please check out the link mentioned below,this will help u.
How to Refresh data on ALV tree
Regards
Theres

How to make the APEX tree in the "Expand All" shape by default?

Could anybody please enlighten me on how to make the APEX tree in the "Expand All" shape by default please? I created an APEX tree and by default it's in the "Collapse All" shape. I am using APEX 4.1.0.00.21

Hi,
you can check the view source of html and check the onclick code written on that plus sign(Expand All), just copy that onclick javascript code and put it on page javascript event.
Thanks,
Jaydip Bosamiya
+91-76000 23053
http://jbosamiya.blogspot.com

How to force the Netscape Browser to open the "Open or Save" dialog box?

Hi, I tried to force the browser to open the "Open or Save" dailog box for downloading a file.
response.setContentType(context.getMimeType(file.getName()));
response.setHeader("Content-Disposition", "attachment; filename=\"" + file.getName() + "\"");
This works fine with IE for all file types( Even though he prompts twice to Open the file directly). but Netscape opens the file directly in the browser with showing any dialog box for text and html files. Anyone knows how to force the netscape in this case or for any file type? Any help will be appreciated.
Thanks

any one has the solution for this issue ? I tried the search and I didnt find any answer.
when your trying to open a pdf file as attachment is seperate window, it works well in IE but in netscape it opens up in the same browser, it doesnt open a seperate window
res.setContentType( "application/pdf" );
res.setHeader("Content-Disposition","attachment; filename=\"" + cofcFileName+"\"");

How to Force the Good Plan present in dba_hist_sql_plan for an SQL_ID

Hi Folks
Here i have a question on how to fix the query execution plan for which we are facing the problem. The current execution plan of the SQL ID is bad , but the execution plan in dba_hist_sql_plan or v$sql_plan is showing good one's.
So how to force the plan_hash_value present in dba_hist_sql_plan or v$sql_plan to the current sql. Where in we cannot try using any kind of hints in the SQL so my question here , is there any way to update manually to update the plan_hash_value for the SQL_ID so that it can use the execution plan which we want to force.
Regards,
Phani.

But my question is i have the good plan for the SQL_ID which is now running with the bad plan ( I am able to see the good plan in dba_hist_sql_plan view ) , my challenge here is how to force >the SQL_ID to take good plan PLAN_SQL_HASH_VALUE. Once the query is parsed and in memory I'm not aware of any way of changing the plan :(
A day later a similar situation came up with one of our clients. I'm still not aware of any way to manually change the execution plan of an already parsed SQL but suspect histograms and/or bind peeking may be a way to explain this phenemenon
Edited by: riedelme on Jun 18, 2010 6:13 AM

How to remove the bookmark from the table of contents?

Hi everyone, I have a question:
How to remove the bookmark from the table of contents in Captivate 6?
Regards...

Doug, your frustration is making you "bug" gun trigger happy. LOL
LOL, I suppose I have.
I believe the answer you are looking for is in the publishing preferences: under LMS advanced settings, look for the option: never send resume data.
[can someone please confirm this - I am not at a desktop now]
Anyhow, selecting this option will stop resume data - so the lesson will treat even returning learners as new. Hopefully, this will work for you.
This works! Thank you again!
*but* Why isn't Captivate asking the learner to make the choice of whether to start over or resume. It does this correctly if the lesson is published stand-alone.
Thanks again!

I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.

I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.

A couple of suggestions that may help:
- Make sure you've made the left-hand column as wide as possible by grabbing the divider between the column and the Library grid view.
- You can hide a parent folder from the display by right-clicking it and selecting Hide This Parent. This will shift all the child folders to the left.

How to force the Netscape browser to use Java Plug-in 1.3.0_02?

For Analyzer 6.2.1, how to force the Netscape browser to use Java Plug-in 1.3.0_02?

Change the classid in the object tag here is some info.This applies to JRE's 1.3.1 and greater.How do I know what Class ID to use for a specific JRE?CAFEEFAC-0013-0001-0004-ABCDEFFEDCBACAFEEFAC = This tells the browser to force a specific JRE0013-0001-0004 = JRE version number 1.3.1_04 (1.3.1_08 would be 0013-0001-0008)ABCDEFFEDCBA = Just needs to be there.1.3.0_02 = E19F9331-3110-11d4-991C-005004D3B3DB, it seems like they did not implement the standard until v.1.3.1Any good JRE Version = 8AD9C840-044E-11D1-B3E9-00805F499D93, this class id will just look for any good JRE.http://java.sun.com/j2se/1.4.1/docs/guide/plugin/developer_guide/version.html

I cannot figure out how to hide the bookmark/reading list column

I UPDATED MY OSX ON 09/26/14 TO THE NEW 10.9.5. AT THE SAME TIME I UPDATED MY SAFARI SERVER TO 7.1. HOW DO I DO CHANGE FOR THE FOLLOWING NEW ISSUE? THE SIZE OF THE FONTS HAVE CHANGED UNDER MY DESKTOP FOLDERS. WINDOWS DO NOT OPEN TO FULL SCREEN AND I CANNOT FIGURE OUT HOW TO HIDE THE BOOKMARK/READING LIST COLUMN TO THE LEFT OF THE WINDOW WHICH IS HIDING THE WINDOW UNDERNEATH,
<Re-Titled By Host>

did your CAPSLOCK get stuck on too? ccc

How to force the bookmark tree to autoexpand upon open

Similar Messages

Maybe you are looking for