How to force waveform graph cursors to show Y value on more than one plot?

Hello
Is it possible to show more than one Y value on waveform graph cursors?
Thanks in advance.
Pawel

Hi Dennis
That is correct, on graph woth multiple plots I want to display multiple Y values of plots at the same X value.
I know I can use property node to access cursor list etc. and this is how I have done it, but my question was rather if it is possible to force the cursor legend to display more than one Y value (as a native display). As a default it displays one value and you can choose which plot you want to stick to, but it would be a great feature to have possibility to expand cursor legend to display more than one value.
The question has nice consequences. If it was possible, you could use a property node to export image of the graph, control sizes, or even simple "copy" data from the popup menu. Otherwise we need to "artificially" glue the exter
nal controls displaying Y values if we want to export pictures, etc.
But since you did not answer that I supose it is not possible, as I thought.
thanks anyways.
kind regards
Pawel

Similar Messages

  • Something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it?  I have had it for more than one year without any problem

    something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it?  I have had it for more than one year without any problem

    To turn on/off retail mode, go to settings, general, legal.
    Do not open legal, just put the cursor there.
    Then, on the remote, type this sequence : right - right - left - center.
    The AppleTV should reboot.

  • How to assign values for more than one field

    Hi,
    I have written following code
    constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
    constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
    constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
    field-symbols: <L_FIELD>  TYPE ANY.
    field-symbols: <L_FIELD1> TYPE ANY.
    field-symbols: <L_FIELD2> TYPE ANY.
          Assign (fieldname) to <l_field>.
          <L_FIELD> = 'ZB'. " value according to your requirement
          Assign (fieldname1) to <l_field1>.
          <L_FIELD1> = 'ZB'.
    while debugging <l_field1> is not assinging (fieldname1).
    Im able to assing for (fieldname).
    how to assign value for (fieldname1).
    plz suggest me to assign values for more than one field.
    Regards,
    Brahmaji

    Hello,
    Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
    It is KNA1-LIFSD

  • How can I represent more than one plot in an only one chart?

    Hello everyone,
    i got a code where I don't understand how to represent more than two plots, with different scales each, in the same waveform chart.
    As brief review:
    * 2 adquisition data wired to Bundle
    * wire from Bundle to waveform chart.
    * options of th chart: stack plots.
    I've tried to expand the Bundle but the problem is that I'm wiring a 3 element cluster to a 2element cluster chart. I don't understand how to upgrade the chart...
    (there's the two plots in each chart)
    (there's the code, where I've already tried expanding any bundle and wiring other signals, then wiring the bundle's output to the chart)
    I think if I could add more scales, it will be possible to plot three plots on the same chart.
    Thank you for your time
    Marcelo A J

    Since you are dealing with waveforms already, I think you actually want to have an array of waveforms to go into your chart.  You also need to map the plots to the scale that you want to use.  You can do that in the plot tab of the properties window.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How to display help text for Region in a page having more than one region

    Hi all,
    I want to display help text for each region in my page. I have 5 regions in my page.
    I have a big help text for each of my region so can any easy way is there to put the help text for each region more than 10 lines .I tried lot by searching forums but not able to implement. any document is there then please let me know.
    Thanks in advance,
    Amit

    i mean either if we click the region title name it should display some help text of near about 10 lines in a popup window.
    Or on moseover whenever we will put the cursor into the region title then it should displat the help text message of line 10.
    Hope you will get my qustion well.
    Thanks,
    Amit

  • How can I save a website as a favorite place under more than one file folder? I think I used to have this ability, now it'll only save it in one place.

    What this does for me is allow me to find rarely accessed websites by looking under different kinds of categories of favorite places. If I'm restricted to only one location for the data it makes it harder to find.
    Thanks in advance for any help you can give. It may still be possible to do this, and I just don't know how. In the past, if I created a new file folder and saved a webpage to the new folder, it would persist even after I saved it a 2nd time to a different folder. Now, if I save it to a 2nd folder, it will disappear from the 1st folder.

    You can do a Copy & Paste in the Bookmarks Manager (Shift+Ctrl+B) to create a copy of a bookmark.<br />
    You can also drag the website's favicon on the left end of the location bar to a folder into the Bookmarks menu drop down list or to a folder in the Bookmarks side bar (Ctrl+B) or onto the Bookmarks Toolbar.<br />
    In the side bar you need to click to the left of the icon to prevent Firefox from opening the bookmark.
    *Old Add Bookmark Behavior: https://addons.mozilla.org/firefox/addon/8479

  • How do I enable Firefox 4 to do a search on more than one word (e.g. "yahoo mail") without receiving the error message "the URL is not valid and cannot be loaded"?

    After loading Firefox 4.0, I changed the address bar search engine to Google Search by Name, so I'd be taken straight to the most relevant webpage when I type in a word.
    It works fine when I type in one word, but if I use a search with more than one word (e.g. "yahoo mail" or "google maps") I get an alert saying "The URL is not valid and cannot be loaded". Is there any way I can fix the address bar to accept multiple word searches?
    I've tried disabling all my add-ons, but it didn't make any difference.

    Hi, this should sort out your problem:
    1. Type in "about:config" into the address bar, this will open the settings menu. Click on "I'll be careful, I promise!"
    2. Search for "keyword.URL" in the filter bar.
    3. Enter "http://www.google.com/search?btnI=I%27m+Feeling+Lucky&q=" into the value field.
    I'm no expert, but I had the same problem which got on my nerves after being so used to being able to type anything in, and following these steps fixed it.

  • How do I tell FiIrefox to only restore a sesson of more than one tab, and disregard the restore of a single tab session (ie. closing the browser)

    I am on the beta channel of Firefox (currently 17.0, by the about window) and I cannot seem to find a way to limit the size of a browsing session that is automatically restored when re-opening the browser. In the past, Firefox would only save sessions of more than one tab when closing the entire application, and ask me about restoring said session when restarted. Now, Firefox seems to treat a session of just a single tab the same, which is a preference I dislike, given that I use a blank start page to great effect.
    I am using a number of addons, including Tab Mix Plus, which specifically modifies tab behavior (although I have it configured to use Firefox's default session manager), but the problem persists even with all addons disabled.
    I cannot seem to find an option in about:config to change this behavior. Is this a permanent change within Firefox, and if so, is there or will there be an option to specify the number of tabs that constitute a session that will be automatically saved?

    Make sure that Firefox closes properly to prevent session restore from restoring a crashed session.
    *"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
    *"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
    Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.

  • How set value for more than one variable using a single prompt

    There is a way to set more than one variable with a single prompt?
    e.g. set @CurrentYear and @PasteYear using just a single prompt for @CurrentYear.
    Some hint?
    Thanks
    Luc

    Using repository variables you can set like that.
    Check this link http://gerardnico.com/wiki/dat/obiee/set_variable
    If helps pls mark

  • Maps - how to set up more than one destination

    In Mavericks 10.9.4, how do I use the system Maps application to set up more than one destination?  I saw no way to add a 2nd destination to my route.  I know I could set up several one-destination trips but that seems silly.

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • How to make an indicator takes more than one input

    Hello,
    I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gauge moves to different angles basesed on the logic structure and not only to one degree).
    Thanks in advance,
     

    YES, you got it right Coastal !
    This is what i want to do,
    I dont know how to establish this output in the software, i am still learning LabVIEW.
    I put a merge block to join the outputs but it didnt work.
    check it in the attached VI file.
    I am sure it is an easy thing but I dont know how to implement it.
    Any help you provide is appreciated,
    Best wishes 

  • HT201365 How do I change name of phone if I have more than one iPhone?

    How to change iPhone name for find iPhone where I have more than one iPhone?

    Settings > General > About > Name: Change the name.

  • How to show more than one record at a form-like style report?

    Hi All,
    I developed a form-like style report
    I want it to show more than one record at once (At the same page)
    I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
    but when I close the property palete and open it agian the value is returned to 1 !!!
    how to show more than one record at the same page?????
    Thank u

    Hi,
    there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
    Regards
    Rainer

  • When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?

    When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
    I've tried rebuilding the thumbnail database, but that hasn't helped.

    What version of iPhoto and system are you running?
    Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left.  Does that let more than one photo display in the window?
    OT

  • I have songs from icloud showing on more than one device but only want them on one so how do i delete them

    Can some tell me how i can not have the songs showing on more than one device for my account

    Krshrtr wrote:
    it wont let you swipe to the left on songs that have the cloud next to them
    That's correct - it only deletes them from your phone, not from iCloud
    If you go into Settings, Music and set Show All Music to Off, you will only see the songs that are actually on the phone.
    One other tip - once you've deleted the songs/lists you no longer want, restart the phone (hold the Home and Sleep buttons for about 10 seconds until the Apple logo appears) to make sure the songs are gone.

Maybe you are looking for