How to forward message to two different queue using jms proxy service

Hi all,
In my project I need to listen to one jms queue then forward the messages to two different queue.
Now I already made one proxy for listening to the queue then pass it to another queue using business service, It works.
But how to forward the messages to two different queue in same flow process using one proxy and bs??
or any other way?
Really thanks in advance.
Regards,
Kahlil

Hi,
I have a MQ queue and i created a Proxy to listen to the queue , but i dont see any activity in OSB logs ..how do i knw if OSB proxy is polling that MQ ( mq is the transport protocol that i am using ) .
Thanks
Prarthana.

Similar Messages

  • How to tranfer messages betwewen two different computers

    I am unable to tranfer messages between two different computers. Please help me. I am trying to simulate an Instant messenger.

    Hi Sid,
    If you could tell a bit more about what u r trying to do, then I might be able to help you.
    are you using Pub/Sub method or PTP and what MOM are you using?
    Regards,
    Sumeet
    I am unable to tranfer messages between two different
    computers. Please help me. I am trying to simulate an
    Instant messenger.

  • Sending Message from Topic1 to Topic2 using OSB proxy service

    Hi all,
    I have created a proxy service which listens to a topic and a business service which writes to a topic.
    In proxy service, in stage i have used publish action to call the business service.
    Through Test console if i test and able to write the message to Topic2.But, when i created a message in Topic1 from weblogic console i'm not able to send the message to Topic2.
    Am i missing any configuration in Topic?
    Please help.
    Thanks

    Thanks vlad and anuj for your replies.
    proxy service is listening to topic when i insert the message from other business service.
    If i directly enter the message in Topic from weblogic console it's not picking up the message.
    What can be the reason for this??
    I have one more doubt. can we call a asynchronous soa composite (BPEL) from OSB.Service callout specifies that it cannot invoke a one way process.Which component can we use to call a asynchronous process?
    Thanks.
    Edited by: 947423 on Jul 23, 2012 3:52 AM

  • How do you set up two different ipads on one computer ?

    I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system.  How do you set up two different uses on one computer.
    Thanks,
    Dave

    Other options not covered in the article:
    1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
    2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

  • How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

    How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

    mparker402 wrote:
    So, when the other iTunes account needs to be used, I should log out of Windows and have the other user log in under a different Windows account, correct?  
    M Parker, 
    Yes, since you are trying to keep things separate, that is exactly what you would do.

  • How do you set up two different icloud accounts on the same itunes account?

    How do you set up two different icloud accounts on the same itunes account?

    Don't know what you mean.
    Please explain.

  • We've had our MBP for a year, set up with my Apple ID. Got an iPad recently and set up with another Apple ID. Would now like to sync the two and set up iCloud/PhotoStream. How to do since have two different Apple IDs?

    We've had our MBP for a year, set up with my Apple ID. Got an iPad recently and set up with husband's Apple ID. Would now like to sync the two and set up iCloud/PhotoStream between the two. How to do since have two different Apple IDs? Thanks!

    Just out of curiosity, why did you elect to use a different id?.  That seems to always make things difficult.  If you have not had the pad for long, or have not bought a lot of stuff Nader the new id, you might want to think about erasing all content, turn off find my phone, wiping the pad and starting over.
    You can sync 2 different ids ( at least move pictures, books and music back and forth) if you are syncing through I tunes on your computer, but I don't think you can cross feed I cloud streams.

  • How to forward messages

    How to forward messages to some one ?

    Hold your finger on the message, wait for the popup, select more and then look down at the right corner of the screen where an arrow will allow you to forward what ever message segments you have selected.

  • How to list total number of message in specific Topic/queue using wlst comm

    Hi All,
    Message queue
    How to list total number of message in specific Topic/queue using wlst command

    aaaah sorry, I didn't notice you were looking for a SPECIFIC topic, bad me
    then do something like
    <pre>
    connect('weblogic','weblogic','t3://localhost:8001')
    servers = domainRuntimeService.getServerRuntimes();
    if (len(servers) > 0):
    for server in servers:
    jmsRuntime = server.getJMSRuntime();
    jmsServers = jmsRuntime.getJMSServers();
    for jmsServer in jmsServers:
    destinations = jmsServer.getDestinations();
    for destination in destinations:
    if destination.getName() == 'YOURQUEUE':
    print "Destination ", destination.getName(), " MessageCount ", destination.getMessagesCurrentCount()
    </pre>
    of course performance-wise this is a terrible script because you loop on all destinations, I am sure there is a way to lookup a specific destination, but I am too lazy to investigate....

  • Why can't two different users use Itunes on the same computer with different log ins

    Why can't two different users use Itunes on the same computer with different log ins

    Pmorgan5672 wrote:
    Why can't two different users use Itunes on the same computer with different log ins
    They can, but not at the same time.
    If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message.  If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
    If you are asking the technical reason why, it is something about context switching.

  • How to make message transfer to a topic from a business service synchrouns?

    hi,
    I am posting a message to a JMS queue using a business service (say A) and then I am fetching that message from that queue and using a proxy service (B) and a business service (C) for transferring that message to a topic, now I want that my business service A gets the same message that it initially posted as a response back from the topic to make the whole message transfer synchronous, but the problem is that as I select topic on my JMS transport configuration page of business service the text box where I need to specify the URI for the topic gets blocked,hence I am unable to get a response from the topic, can anybody help me out with this as I really want to make this synchronous.
    Edited by: user12826319 on Jul 21, 2010 4:36 AM

    yes u got it correct...v require a synchronous message transfer to happen i believe d alternative can be that i send the message to topic directly using a business service and expect a response from the topic itself in the form of the message i initially posted, that thing I would manage but the real problem is to get a response to the business service when i use topic, because as i select topic on JMS transport configuration page of business service the end point URI textbox gets blocked...

  • How do I move apps to different pages using my PC?

    Wondering how to move iPad apps to different pages using (a) my PC and (b) my iPad.  Thanks!

    See the following articles:
    http://ipadnotebook.wordpress.com/2012/12/10/how-to-use-itunes-11-to-arrange-app s/
    http://www.cnet.com/how-to/how-to-arrange-iphone-and-ipad-apps-using-itunes/

  • How to pass data between two internal sessions using ABAP memory?

    Hi,
    How to pass data between two internal sessions using ABAP memory?
    It would be fine if you could explain with an example.
    And also let me clear about the data passing between two main sessions and two external sessions with specific examples.
    Thanks.

    Hi ,
      check the example.
    Reading Data Objects from Memory
    To read data objects from ABAP memory into an ABAP program, use the following statement:
    Syntax
    IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
    This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
    You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
    In this statement, the system does not check whether the structure of the object in memory is compatible with the structure into which you are reading it. The data is transported bit by bit. If the structures are incompatible, the data in the target field may be incorrect.
    PROGRAM SAPMZTS1.
    DATA TEXT1(10) VALUE 'Exporting'.
    DATA ITAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
    DO 5 TIMES.
      ITAB-BOOKID = 100 + SY-INDEX.
      APPEND ITAB.
    ENDDO.
    EXPORT TEXT1
           TEXT2 FROM 'Literal'
      TO MEMORY ID 'text'.
    EXPORT ITAB
      TO MEMORY ID 'table'.
    SUBMIT SAPMZTS2 AND RETURN.
    SUBMIT SAPMZTS3.
    The first part of this program is the same as the example in the section Saving Data Objects in Memory. In the example, the programs SAPMZTS1 and SAPMZTS2 are called using SUBMIT. You can create and maintain the programs called using the SUBMIT statement by double-clicking their names in the statement. For further information about the SUBMIT statement, refer to Calling Executable Programs (Reports)
    Example for SAPMZTS2:
    PROGRAM SAPMZTS2.
    DATA: TEXT1(10),
          TEXT3 LIKE TEXT1 VALUE 'Initial'.
    IMPORT TEXT3 FROM MEMORY ID 'text'.
    WRITE: / SY-SUBRC, TEXT3.
    IMPORT TEXT2 TO TEXT1 FROM MEMORY ID 'text'.
    WRITE: / SY-SUBRC, TEXT1.
    Example for SAPMZTS3:
    PROGRAM SAPMZTS3.
    DATA JTAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
    IMPORT ITAB TO JTAB FROM MEMORY ID 'table'.
    LOOP AT JTAB.
      WRITE / JTAB-BOOKID.
    ENDLOOP.
    The output is displayed on two successive screens. It looks like this:
    and
    The program SAPMZTS2 attempts to read a data object TEXT3 from the data cluster "text", which does not exist. TEXT3 therefore remains unchanged. The existing data object TEXT2 is placed in TEXT1. In both cases, SY-SUBRC is 0, since the cluster "text" contains data.
    The program SAPMZTS3 reads the internal table ITAB from the cluster "table" into the internal table JTAB. Both tables have the same structure, namely that of the ABAP Dictionary table SBOOK.
    Pls. reward if useful.....

  • How to set expiry time for cached Subjects of authenticated proxy service.

    How to set expiry time for cached Subjects of authenticated proxy service in message level authentication.
    Because of this, password change does not effect immediatly in proxy invocation.
    I'm using Weblogic 10.3 and OSB3.0

    Hi,
    You can activate Time-Dependent Publishing Service on your XML form and once the Lifetime of Documents is over then the document is not visible to users.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/c87d3cf8ff3934e10000000a11405a/frameset.htm
    It is only invisible but not deleted!
    So to delete all expired XML Forms you should run Scheduler Tasks for Time-Dependent Publishing:
    <b>TimeBasePublishingUnpublish</b>
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/bc37b5789dee4eaa8005bff84f14cf/frameset.htm
    You can also create your own Scheduler Task which deletes/archieves all expired XML Forms.
    Greetings,
    Praveen Gudapati
    [Points are welcome for helpful answers]

  • How to restrict acess to a single user for a proxy service in OSB

    how to restrict acess to a single user for a proxy service in OSB

    A.     Go to Proxy Service and Click on the Security tab
    B.     Click on Transport Acess Control Policies to Edit.
    C.     Click on Add Conditions to Restrict the users.
    D.     In the Predicate List Select the User Category
    E.     Give the User Name to which you want to give access.

Maybe you are looking for