How to get an international English date format if I'm in a country where the date format is something else?

I'm physically in Malaysia and my iPad sets Malay as my default time format setting. How to get rid of the whole thing of using Malay as my date format and use English as default for everything including date and time ? Under setting> general > international, I have to choose something and English is not an option.

You need to choose an English-speaking country - I have Settings > General > International > Region Format set to United Kingdom (as I'm in the UK), so the first day of the week is monday and times are of the format 01:23 etc (there also options for US, Canada, Australia etc)

Similar Messages

  • How to get an international English keyboard?

    Does anyone know how to get a MBP with an international English keyboard instead of the US English one? I find the rectangular return key almost impossible to get used to after years of using an L-shaped one.

    The MBP  ships with a standard keyboard, though it may be possible to remap individual keys. However, you're going to still have a standard keyboard.
    You can change keyboards if you have a desktop Mac, and there are several options in a variety of languages. But a notebook is limited in this way.

  • How to render animation to a MP4 format or something else?

    Hello. I usually render my animation to uncompressed AVI because after it I have to render it again with different software for video motage. So there wasn't any problem. But today I have to render my animation directly from After Effects. So I can't render it to uncompressed AVI anymore. I try render to MP4 format but that doesn't exsist. Even after wathich that tutorial below, I don't have that option what we can see in this video:
    So I try to do something else. And I found different format as QUICKTIME with H.264. But after render, I can't see my animation (I can see only voice, there is no video). What is strange because movies from Adobe Premiere rendered to H.264 codec work perectly! The same codec but if I render videos from After Effects I can't see it in Windows. But from Adobe Premeire I can. Strange!
    So I render my animation to QUICKTIME -> Motion-A format. And it works, I can see a whole rendered video now. But... 5 sec is over 150MB! And this is way to heavy.
    Please, tell me what I have to do to render my animation in a good preset.

    MP4 is the best format for what you describe.
    After Effects never did a good job of rendering to that format.
    Instead of wasting development time trying to make AE better at it, the After Effects team chose to let the Adobe Media Encoder team work on encoding things and they would work on making After Effects perform better and have better features.
    So, either render an intermediate file from AE and use that in the Adobe Media Encoder or send your AE comp directly to AME. Either way, you will use the Adobe Media Encoder to make an MP4. That's how I did it even when AE could make MP4's because AE wasn't good at making them. You can get better quality at smaller file sizes with AME. Go with it.
    Here's the Adobe team's official word on it: using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects
    They explain the proper workflow and they explain why they removed H.264 and WMV encoding from AE.

  • How to get length of a data field

    Hi Experts,
    How to get length of a data field. For example data field /BIC/0COSTCENTER length is 9. and the entry in the table is /BIC/0COSTCENTER = 1000 only. How to get the lenth of value in the table.
    Any help greatly appreciated. Thanks.
    Best Regards,
    Suresh.

    Below is example  code
    Data: var1(10) type c value '2500',
          var2 type i.
    var2 = Strlen( var1 ).
    write var2.
    <b>Reward Points for helpful answers</b>
    Satish

  • How can get difference between 2 dates in the form of days

    how can get difference between 2 dates in the form of days

    Hi,
    Check the following program:
    REPORT ZDATEDIFF.
    DATA: EDAYS   LIKE VTBBEWE-ATAGE,
          EMONTHS LIKE VTBBEWE-ATAGE,
          EYEARS  LIKE VTBBEWE-ATAGE.
    PARAMETERS: FROMDATE LIKE VTBBEWE-DBERVON,
                TODATE   LIKE VTBBEWE-DBERBIS DEFAULT SY-DATUM.
    call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
      exporting
        i_date_from          = FROMDATE
        i_date_to            = TODATE
      I_FLG_SEPARATE       = ' '
      IMPORTING
        E_DAYS               = EDAYS
        E_MONTHS             = EMONTHS
        E_YEARS              = EYEARS.
    WRITE:/ 'Difference in Days   ', EDAYS.
    WRITE:/ 'Difference in Months ', EMONTHS.
    WRITE:/ 'Difference in Years  ', EYEARS.
    INITIALIZATION.
    FROMDATE = SY-DATUM - 60.
    Regards,
    Bhaskar

  • How to get current time and date??

    How to get current time and date from my PC time and date to the java application??
    i use java.util.* package but got error, that is:
    - java.util.* and java.sql.* class are match
    - abstract class cannot be instantiated
    so what can i do, pls guide...thanks...

    There is a method in the System class that will return the current system time. You could also instantiate a Date, Time, Timestamp, or Calendar object, all of which get created with the system time by default.
    Don't import *. Import the specific classes you need.
    Next time, post the actual text of the exceptions/compile errors. If you make people guess, most just won't bother.

  • How to get an email when data got inserted

    Hi All,
    Could you please let me know how to get an email when data got inserted into table by using sql/plsql
    Thanks in adavance

    Could you please let me know how to get an email when data got inserted into table by using sql/plsql
    Well that seems pretty straightforward - write some pl/sql to send you an email when that pl/sql inserts data into a table.
    See this Oracle-base article for an example of sending mail.
    http://www.oracle-base.com/articles/misc/email-from-oracle-plsql.php
    Post what you have tried so far. What part of what you have tried doesn't seem to be working?

  • How can get back my backup data from an external element ?

    How can get back my backup data from an external element ?

    See the section titled "restoring data from Time Machine backups" in this Apple support article; that should get you going.
    http://support.apple.com/kb/ht1427
    Regards.

  • How to get Po item Delivery Date ?

    who can tell me how to get PO Item Delivery Date ?
    Thank You!

    hi
    good
    go through these links,hope these ll help you to solve your probelm
    http://web.mit.edu/sapr3/windocs/bpors03m.htm
    http://www.sap.com/southafrica/services/education/pdf/BPP.pdf
    thanks
    mrutyun^

  • How to get days between two dates

    Hi ,
    How to get days between two dates.
    Regards,
    Ramesh.

    Hi Ramesh,
    REPORT ZDATEDIFF.
    DATA: EDAYS   LIKE VTBBEWE-ATAGE,
          EMONTHS LIKE VTBBEWE-ATAGE,
          EYEARS  LIKE VTBBEWE-ATAGE.
    PARAMETERS: FROMDATE LIKE VTBBEWE-DBERVON,
                TODATE   LIKE VTBBEWE-DBERBIS DEFAULT SY-DATUM.
    call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
      exporting
        i_date_from          = FROMDATE
        i_date_to            = TODATE
      I_FLG_SEPARATE       = ' '
      IMPORTING
        E_DAYS               = EDAYS
        E_MONTHS             = EMONTHS
        E_YEARS              = EYEARS.
    WRITE:/ 'Difference in Days   ', EDAYS.
    WRITE:/ 'Difference in Months ', EMONTHS.
    WRITE:/ 'Difference in Years  ', EYEARS.
    INITIALIZATION.
    FROMDATE = SY-DATUM - 60.

  • I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

    I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

    Hi, Abril_Perez17.
    This may be related to a new feature embedded in iOS7 that shows all purchased music by default.  Go to Settings > Music, then turn off Show All Music.  See if the issue ceases once the feature has been disabled.  This information is located on page 63 of the user guide below. 
    iPhone User Guide
    Regards,
    Jason H. 

  • Error Message:  I keep getting this error when I try to download apps or songs :  MZCommerce.CreditBalance Mismatch.Mobile_message   Can someone tell me how to get rid of this?  It is very aggravating when trying to use the IPAD.

    I keep getting this error when I try to download apps or songs :  MZCommerce.CreditBalance Mismatch.Mobile_message   Can someone tell me how to get rid of this?  It is very aggravating when trying to use the IPAD.

    Try to go to Settings and then Store. Tap to your Apple ID and select View Apple ID. Now choose to check your payment information and when you're done tap Done. I had to rewrite my three digit code of the credit card and now it works.
    Oh, I also activated Genius for Apps but I don't think it makes any difference.

  • I am getting some update that says I need to have geno as my home page and down load something else on the computer to run the maverick os system

    I am getting some update that says I need to have geno as my home page and down load something else on the computer to run the maverick os system. Is this you or some hacker

    Is your iMac running okay? Where are you getting this update from? Especially if it is an e-mail, I would not do what the 'update' is suggesting.
    Your profile shows you are running Mavericks. If everything is okay, then it would appear to me you don't need to download something to run Mavericks.

  • How to get a report in pdf format.

    Hi Experts,
    Could any one let me know that, how to get the report in PDF format.
    Once a report is generated it should be displayed in pdf format or downloaded in pdf format.
    Thanks in Advance,
    Regards,
    Irfan Hussain

    Hi,
    Check out this code:
    REPORT  zspooltopdf.
    PARAMETER: p_email1 LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_sender LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_delspl  AS CHECKBOX.
    *DATA DECLARATION
    DATA: gd_recsize TYPE i.
    * Spool IDs
    TYPES: BEGIN OF t_tbtcp.
            INCLUDE STRUCTURE tbtcp.
    TYPES: END OF t_tbtcp.
    DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
          wa_tbtcp TYPE t_tbtcp.
    * Job Runtime Parameters
    DATA: gd_eventid LIKE tbtcm-eventid,
          gd_eventparm LIKE tbtcm-eventparm,
          gd_external_program_active LIKE tbtcm-xpgactive,
          gd_jobcount LIKE tbtcm-jobcount,
          gd_jobname LIKE tbtcm-jobname,
          gd_stepcount LIKE tbtcm-stepcount,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc.
    DATA:  w_recsize TYPE i.
    DATA: gd_subject   LIKE sodocchgi1-obj_descr,
          it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_sender_type     LIKE soextreci1-adr_typ,
          gd_attachment_desc TYPE so_obj_nam,
          gd_attachment_name TYPE so_obj_des.
    * Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
          gd_destination LIKE rlgrap-filename,
          gd_bytecount LIKE tst01-dsize,
          gd_buffer TYPE string.
    * Binary store for PDF
    DATA: BEGIN OF it_pdf_output OCCURS 0.
            INCLUDE STRUCTURE tline.
    DATA: END OF it_pdf_output.
    CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
               c_no(1)     TYPE c   VALUE ' ',
               c_device(4) TYPE c   VALUE 'LOCL'.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    * Write statement to represent report output. Spool request is created
    * if write statement is executed in background. This could also be an
    * ALV grid which would be converted to PDF without any extra effort
      WRITE 'Hello World'.
      new-page.
      commit work.
      new-page print off.
      IF sy-batch EQ 'X'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
    *** Alternative way could be to submit another program and store spool
    *** id into memory, will be stored in sy-spono.
    *submit ZSPOOLTOPDF2
    *        to sap-spool
    *        spool parameters   %_print
    *        archive parameters %_print
    *        without spool dynpro
    *        and return.
    * Get spool id from program called above
    *  IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
        PERFORM convert_spool_to_pdf.
        if p_delspl EQ 'X'.
          PERFORM delete_spool.
        endif.
        IF sy-sysid = c_dev.
          wait up to 5 seconds.
          SUBMIT rsconn01 WITH mode   = 'INT'
                          WITH output = 'X'
                          AND RETURN.
        ENDIF.
      ELSE.
        SKIP.
        WRITE:/ 'Program must be executed in background in-order for spool',
                'request to be created.'.
      ENDIF.
    *       FORM obtain_spool_id                                          *
    FORM obtain_spool_id.
      CHECK NOT ( gd_jobname IS INITIAL ).
      CHECK NOT ( gd_jobcount IS INITIAL ).
      SELECT * FROM  tbtcp
                     INTO TABLE it_tbtcp
                     WHERE      jobname     = gd_jobname
                     AND        jobcount    = gd_jobcount
                     AND        stepcount   = gd_stepcount
                     AND        listident   <> '0000000000'
                     ORDER BY   jobname
                                jobcount
                                stepcount.
      READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
      IF sy-subrc = 0.
        message s004(zdd) with gd_spool_nr.
        gd_spool_nr = wa_tbtcp-listident.
        MESSAGE s004(zdd) WITH gd_spool_nr.
      ELSE.
        MESSAGE s005(zdd).
      ENDIF.
    ENDFORM.
    *       FORM get_job_details                                          *
    FORM get_job_details.
    * Get current job details
      CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
           IMPORTING
                eventid                 = gd_eventid
                eventparm               = gd_eventparm
                external_program_active = gd_external_program_active
                jobcount                = gd_jobcount
                jobname                 = gd_jobname
                stepcount               = gd_stepcount
           EXCEPTIONS
                no_runtime_info         = 1
                OTHERS                  = 2.
    ENDFORM.
    *       FORM convert_spool_to_pdf                                     *
    FORM convert_spool_to_pdf.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    * Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
    *       FORM delete_spool                                             *
    FORM delete_spool.
      DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
      ld_spool_nr = gd_spool_nr.
      CHECK p_delspl <> c_no.
      CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
           EXPORTING
                spoolid = ld_spool_nr.
    ENDFORM.
    Regards,
    Gayathri

  • How to get  sales area text data ( line1) from XD02

    hi sap gurus,
    how to get table name for sales area text xd02 (like marking, remarks , tag ) or we have to use function module to fetch it in the report.
    thanks ,
    Amit Ranjan .

    Table names for all texts are STXH,STXL but from table u cannot fetch them as in the table these texts are stored in RAW format. To fetch this text in human readable format use the FM READ_TEXT. To use this Fm u have to pass text name, text id and object name..u can get all data by double clicking the editor for each text..it will goto the sapscript editor(line editor) then from menu path Goto->Header..u will get all the info....
    Regards,
    JOy.

Maybe you are looking for