How to get Application Error descriptions

Hi, all:
Our interface has ECC system involved.
The Message Monitoring in local integration engine shows that there are many messages with application errors.
I would like to export all messages with application error:
include message ID and error text.
Right now, I can export the data from Message monitoring window, but I can not get application error from exported spreadsheet. anyone has idea how to do it ?
Thanks in advance !
Liang Ji

Hi, venkata:
Thanks for you reply.
Our scenario is
ThirdPartySystem ---> SOAP ---> XI ---> ECC (ABAP Proxy)
Technically, the scenario is running perfect.
After go-alive, there are many application errors because of the data problem, e.g.:
Cannot create order. Service order number already exist
We know these problem are caused by conversion, now I would like to track each message, so I exported to spreadsheet from Message monitoring.
But the exported spreadsheet does not include Application Error text, this is the reason I post the question here, do you have idea about it ?
Thanks
Liang

Similar Messages

How to create the Error description?

Hi Experts,
Scenario : Webservice -> XI -> JDBC (Synh)
Pass the EmpId as a webservice request and get the corresponding Emp address as a response.
Q: How to set the error description/error message, If we don't have address info. for the requested EmpId?
Regards
Sara

Hi Sara,
You would have mapped the response mapping from the result of the JDBC select to the outbound message type.
In the response mapping, if you can check if the value of the resultset is "null", which means there is no address for the ID. In that case you can change the result to be some custom error message.
You would be needing to use the standard boolean function "if" and a standard "Constant" function, where you would enter your custom error message and map the output of the if condition to the source/outbound element node.
regards
krishna

How to get those Char Description when i record please give a solution

Hi Experts
when i try to extend using BDC the meterial all data is getting copied to new plant but in MRP3 Configure varients is not getting copied in bdc i am getting all the values from parent plant but these values are not getting displayed in new plant for only *MRP3 Configure varients
how to get those values please give a solution
and
when i am trying to make the BDC recording of creation of meterial in this process
in MRP3 when i give configurable meterial = Lamp or CT or VOLTMETER and when
i go for configurevariants button it's not displaying any Char Description for the perticular meterial
but in general when i creat a material process there Char Description are coming where i can give the values
how to get those Char Description when i record please give a solution

Hi Maen Anachronos
i am Getting popup where i can give any value
but in creation of meterial for a perticular config meterial there is will be 1 templete in which we will get some constant Char Description where we'll have some options to give the value
but when it 's done in BDC Recording it's not displaying any values Char Description then how can we decide the values to what to give when Recording

How to get the Error message from hr_contact_rel_api.create_contact

Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Js

user12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein

How to get Application Component in RSA1

Hi Experts,
I am not find any Application Components (RSA1) all my Data Sources are under the tree of Unsigned Nodes.
How to get Application Component for my application, I am developing HCM application under that E-Recruiting.
Can anyone help me regarding this.
Regards
Vijay

Hi
Whatever you have on infosource,will have same components.
Goto RSA1 then source systems. double click on source system then right click on ypur R/3 source system then say display datasource tree.
Chandu.

Keep getting Application Error

Keep getting "Application Error 523 Reset" on home screen. Need help please!

Try resetting the device by removing the battery for 1 minute then replacing it. See if it reboots.
Usually with a 523 error you'll need to reload the OS on your device.
First download and install the Desktop Manager from here (4.6 without Media Manager is recommended): https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Next download and install the handheld software from here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Afterwards try reloading the OS by connecting the device to your computer, open the Desktop Manager, then go into the Application Loader. This will open a wizard that steps you through reloading the OS onto your device. More detailed steps can be found here:
http://www.blackberry.com/btsc/KB03485
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Can't open Lightroom. Keep getting application error - unable to start correctly (0xc000007b).

Keep getting application error - unable to start correctly (0xc000007b). Have uninstalled and reinstalled twice with no change.

...07b Problems http://forums.adobe.com/thread/1355374?tstart=0

HT201210 please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen

please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen

Is the iPod jailbroken? Googling shows that error 11 appears if it has been jailbroken.

How to get an error icon with tool tip in a displaying table in a particu

How to get an error icon with tool tip in a displaying table in a particular field..
Thanks.

Hi,
In the context create an attribute of type string .
Create the attribute in the node which you bind for table.
In the layout .
1.create a Table UI element.
2 create binding for UI element.
3Right click on the Table UI and select insert table column.
4.once the table column is inserted right click on table column and select insert cell editor.
5.create the cell editor of the type image.
6.Bind the source property of the image to the attribute in the node which you have created.
so depending on what image(type of icon) needs to be displayed set the attibute accordingly.
refer to the link for image :
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d1/af8841349e1909e10000000a155106/frameset.htm]
Priya

RRB-How to get the activity description instead of WBS element in the bill

Dear All,
I am using RRB DIP profile to do my Resource related billing
RRB-How to get the activity description instead of WBS element in the billing
document.Now iam able to get the cost and the quantity used as line items but instead of getting the respective line items in the invoice iam still getting the WBS
element description for all the activities.Can some body guide me to overcome this problem.
Assured reward points for your suggestions and help.
Thanking you,
Best regards,
R.Srinivasan

Dear All,
Please can any body help me for the same.IT is urgent.I will award you points.
thankyou,
Best regards,
R.Srinivasan

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

Java - Axis2: How to get an error code / error message from the Javascript via SOAP

Hi
In our Java applicsation we call a Javascript in a Indesign CS Server using the following code:
--- SNIP BEGIN ---
// calls the remote service on the indesign server
try {
// create service
ServiceStub oIndsgnSrvStub = new
ServiceStub(sIndesignServer);
// create service parameter
ServiceStub.RunScriptParameters
oIndsgnSrvRSParams = new ServiceStub.RunScriptParameters();
// create arguments with source- and target-file for parameter
ServiceStub.IDSPScriptArg[] oIndsgnSrvSArgs = new ServiceStub.IDSPScriptArg[2];
oIndsgnSrvSArgs[0] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[0].setName("xml-input");
oIndsgnSrvSArgs[0].setValue(sSourceFile);
oIndsgnSrvSArgs[1] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[1].setName("output-file");
oIndsgnSrvSArgs[1].setValue(sTargetFile);
// define service parameter
oIndsgnSrvRSParams.setScriptArgs(oIndsgnSrvSArgs);
oIndsgnSrvRSParams.setScriptFile(sScriptFile);
oIndsgnSrvRSParams.setScriptLanguage("javascript");
oIndsgnSrvRSParams.setScriptText("");
// create runscript
ServiceStub.RunScript oIndsgnSrvRS = new ServiceStub.RunScript();
// set parameter
oIndsgnSrvRS.setRunScriptParameters(oIndsgnSrvRSParams);
//$$$ there should be an answer returned by the InddSrvr
// execute SOAP call
ServiceStub.RunScriptResult oIndsgnSrvRes = oIndsgnSrvStub.RunScript(oIndsgnSrvRS);
if(oIndsgnSrvRes.getErrorNumber() == 0) {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_SUCCESS);
bOK = true;
} else {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_FAILURE);
bOK = false;
//$$$ should be set, if there is something returned by inddsrvr
//oServerProdJob.setErrorMsg(sErrorMsg);
} catch(Exception e) {
sError += e.getMessage() + "\n";
bOK = false;
--- SNIP END -----
The problem is that we don't get the error code and/or the error message from the Javascript in oIndsgnSrvRes. The error code is always 0 if I set an Integer value as return in the Javascript. If I set a String, there is an Exception in the Java application.
Here is the Java script we use:
--- SNIP BEGIN ---
main();
main()
var sError = "";
var sXMLInput = "";
var sLayoutPath = "";
// get the SDKCodeSnippetRunner object
var cbpAdapter = app.cbpCbpadapterObject
if (cbpAdapter) {
sXMLInput=app.scriptArgs.get("xml-input");
sLayoutOutputFile=app.scriptArgs.get("output-file");
sError = cbpAdapter.doProcess(sXMLInput, sLayoutOutputFile);
return sError; // This give an Exception; if I return an Integer the ScriptResult is always 0
--- SNIP END -----
If I try this with the test application from Adobe I get the error code correctly. But in the Java application, using SOAP, I can't get the error code.
What could be wrong?
Any ideas?
Thanks a lot for the support.
Kind regards
Hans

user11340104 wrote:
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Well, let google be your friend,
http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
There are many threads I guess talking about the same issue.
HTH
Aman....

How to get application path in java bean

hi all,
We will be using <%= application.getRealPath("/") %> for getting the application path in jsp. is there any similar way to find the path using a bean. Please do help....
thanx
Message was edited by:
end

I try to use application.getRealPath("/") in my .java file, but gets an error "application can't be resolved". Do you need to include any library in order to use "application.getRealPath("/")"?
Thank you.

How to get ORA errors in alertlog file using shell script.

Hi,
Can anyone tell me how to get all ORA errors between two particular times in an alertlog file using shell script.
Thanks

Hi,
You can define the alert log as an external table, and extract messages with SQL, very cool:
http://www.dba-oracle.com/t_oracle_alert_log_sql_external_tables.htm
If you want to write a shell script to scan the alert log, see here:
http://www.rampant-books.com/book_2007_1_shell_scripting.htm
#!/bin/ksh
# log monitoring script
# report all errors (and specific warnings) in the alert log
# which have occurred since the date
# and time in last_alerttime_$ORACLE_SID.txt
# parameters:
# 1) ORACLE_SID
# 2) optional alert exclusion file [default = alert_logmon.excl]
# exclude file format:
# error_number error_number
# error_number ...
# i.e. a string of numbers with the ORA- and any leading zeroes that appear
# e.g. (NB the examples are NOT normally excluded)
# ORA-07552 ORA-08006 ORA-12819
# ORA-01555 ORA-07553
BASEDIR=$(dirname $0)
if [ $# -lt 1 ]; then
echo "usage: $(basename) ORACLE_SID [exclude file]"
exit -1
fi
export ORACLE_SID=$1
if [ ! -z "$2" ]; then
EXCLFILE=$2
else
EXCLFILE=$BASEDIR/alert_logmon.excl
fi
LASTALERT=$BASEDIR/last_alerttime_$ORACLE_SID.txt
if [ ! -f $EXCLFILE ]; then
echo "alert exclusion ($EXCLFILE) file not found!"
exit -1
fi
# establish alert file location
export ORAENV_ASK=NO
export PATH=$PATH:/usr/local/bin
. oraenv
DPATH=`sqlplus -s "/ as sysdba" <<!EOF
set pages 0
set lines 160
set verify off
set feedback off
select replace(value,'?','$ORACLE_HOME')
from v\\\$parameter
where name = 'background_dump_dest';
!EOF
`
if [ ! -d "$DPATH" ]; then
echo "Script Error - bdump path found as $DPATH"
exit -1
fi
ALOG=${DPATH}/alert_${ORACLE_SID}.log
# now create awk file
cat > $BASEDIR/awkfile.awk<<!EOF
BEGIN {
# first get excluded error list
excldata="";
while (getline < "$EXCLFILE" > 0)
{ excldata=excldata " " \$0; }
print excldata
# get time of last error
if (getline < "$LASTALERT" < 1)
{ olddate = "00000000 00:00:00" }
else
{ olddate=\$0; }
errct = 0; errfound = 0;
{ if ( \$0 ~ /Sun/ || /Mon/ || /Tue/ || /Wed/ || /Thu/ || /Fri/ || /Sat/ )
{ if (dtconv(\$3, \$2, \$5, \$4) <= olddate)
{ # get next record from file
next; # get next record from file
# here we are now processing errors
OLDLINE=\$0; # store date, possibly of error, or else to be discarded
while (getline > 0)
{ if (\$0 ~ /Sun/ || /Mon/ || /Tue/ || /Wed/ || /Thu/ || /Fri/ || /Sat/ )
{ if (errfound > 0)
{ printf ("%s ",OLDLINE); }
OLDLINE = \$0; # no error, clear and start again
errfound = 0;
# save the date for next run
olddate = dtconv(\$3, \$2, \$5, \$4);
continue;
OLDLINE = sprintf("%s %s",OLDLINE,\$0);
if ( \$0 ~ /ORA-/ || /[Ff]uzzy/ )
{ # extract the error
errloc=index(\$0,"ORA-")
if (errloc > 0)
{ oraerr=substr(\$0,errloc);
if (index(oraerr,":") < 1)
{ oraloc2=index(oraerr," ") }
else
{ oraloc2=index(oraerr,":") }
oraloc2=oraloc2-1;
oraerr=substr(oraerr,1,oraloc2);
if (index(excldata,oraerr) < 1)
{ errfound = errfound +1; }
else # treat fuzzy as errors
{ errfound = errfound +1; }
END {
if (errfound > 0)
{ printf ("%s ",OLDLINE); }
print olddate > "$LASTALERT";
function dtconv (dd, mon, yyyy, tim, sortdate) {
mth=index("JanFebMarAprMayJunJulAugSepOctNovDec",mon);
if (mth < 1)
{ return "00000000 00:00:00" };
# now get month number - make to complete multiple of three and divide
mth=(mth+2)/3;
sortdate=sprintf("%04d%02d%02d %s",yyyy,mth,dd,tim);
return sortdate;
!EOF
ERRMESS=$(nawk -f $BASEDIR/awkfile.awk $ALOG)
ERRCT=$(echo $ERRMESS|awk 'BEGIN {RS=" "} END {print NR}')
rm $LASTALERT
if [ $ERRCT -gt 1 ]; then
echo "$ERRCT Errors Found \n"
echo "$ERRMESS"|nawk 'BEGIN {FS=" "}{for (i=1;NF>=i;i++) {print $i}}'
exit 2
fi

How to get mysql error as a message on java

hi,
can any one please tell me how we can get the error generated by Mysql database during runtime as a message on a java program form.
thanks

try
aSQLMethod();//this method is capable of throwing an SQLException
catch(SQLException exc)
String errorMessage=exc.getMessagae();//I don't understand what you want to do with this error message
}

How to get Application Error descriptions

Similar Messages

Maybe you are looking for