How to get blank data in alv?
hi
im finding the difference between 2-dates...
below is my code......
my problm is wn there is no data in the gstri field then v_dat1 should be blank...but im getting zeros...
how to get blank instead of zero?
IF <fs_final>-gstrp is not INITIAL and
( <fs_final>-gstri is not INITIAL ) .
CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
EXPORTING
date1 = <fs_final>-gstrp
date2 = <fs_final>-gstri
IMPORTING
datediff = v_dat1
EXCEPTIONS
invalid_datetime = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
IF ( <fs_final>-gstrp GT <fs_final>-gstri ) AND
( NOT <fs_final>-gstri IS INITIAL ) .
v_dat1 = -1 * v_dat1.
ENDIF.
Regards
Smitha
Hi,
If you are using FM 'REUSE_ALV_GRID_DISPLAY' then In your fieldcatalog there is one component called 'no_zero' make it to 'X' like :
WA_FLDCAT-TABNAME = 'IT_FINAL'.
WA_FLDCAT-COL_POS = 1.
WA_FLDCAT-SELTEXT_L = 'BOQ.Amt'.
WA_FLDCAT-FIELDNAME = 'ZAMT'.
WA_FLDCAT-NO_ZERO = 'X'.
WA_FLDCAT-DATATYPE = 'CURR'.
WA_FLDCAT-INTLEN = '20'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR : WA_FLDCAT.
That's it,it will not display if the field value is zero.
Hope this helps,
Thanks & Regards,
Rock.
Similar Messages
-
How to get changed data in ALV in Web Dynpro for ABAP
METHOD on_data_check .
DATA:
node_spfli TYPE REF TO if_wd_context_node,
node_sflight TYPE REF TO if_wd_context_node,
itab_sflight2 TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
IMPORTING
table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AMHi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
lr_table_settings->set_data_check(
IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
lr_table_settings->set_data_check( IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values. -
How to get blank data wn one date is initial?
hi
im finding the difference between 2-dates...
below is my code......
my problm is wn there is no data in the gstri field then v_dat1 should be blank...but im getting zeros...
how to get blank instead of zero?
IF <fs_final>-gstrp is not INITIAL and
( <fs_final>-gstri is not INITIAL ) .
CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
EXPORTING
date1 = <fs_final>-gstrp
date2 = <fs_final>-gstri
IMPORTING
datediff = v_dat1
EXCEPTIONS
invalid_datetime = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
IF ( <fs_final>-gstrp GT <fs_final>-gstri ) AND
( NOT <fs_final>-gstri IS INITIAL ) .
v_dat1 = -1 * v_dat1.
ENDIF.
Regards
SmithaHI,
The type defination of date difference is P whose default value is 0. for that reason you are getting 0 in v_dat1. and thats why it can't be blank.
if you using the v_dat1 for futher processing than you can first check whether v_dat1 is 0 or not then you can proceed with your logic...
OR
other think you have to delcare another variable of type char, assign your v_dat1 and then SHIFT <char var> LEFT DELETING LEADING '0'.
Hope it helps -
How to get check box in alv output
hi gurus
can anyone explian me how to get check box in alv output
it should not be a pop up window
i want to get in output itself
tahnk you
regards
kals.Hi
by using rs_selfield
ty to call dynamic subroutine..
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
read table rs-selfield with key cond = 'X'
endform.
see the below example
REPORT Z_GET_REFRESH no standard page heading.
type-pools : slis.
tables : makt,
mara.
data : i_fieldcat type slis_t_fieldcat_alv.
CONSTANTS :
gc_refresh TYPE syucomm VALUE '&REFRESH'.
data : begin of i_makt occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of i_makt.
data : v_repid like sy-repid,
g_user_command type slis_formname value 'USER_COMMAND',
g_status_set type slis_formname value 'SET_PF_STATUS',
lt_event_exit TYPE slis_t_event_exit,
ls_event_exit TYPE slis_event_exit.
DATA:LC_GLAY TYPE LVC_S_GLAY.
select-options s_matnr for mara-matnr .
start-of-selection.
select matnr maktx from makt into table i_makt
where matnr in s_matnr.
end-of-selection.
Fill the fieldcatlog
perform fill_field.
Call the FM
perform call_fm.
*& Form fill_field
text
--> p1 text
<-- p2 text
FORM fill_field.
data wa_fieldcat type slis_fieldcat_alv.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-outputlen = '18'.
wa_fieldcat-seltext_l = 'Material #'.
wa_fieldcat-col_pos = '1'.
append wa_fieldcat to i_fieldcat.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MAKTX'.
wa_fieldcat-outputlen = '40'.
wa_fieldcat-seltext_l = 'Material Desc'.
wa_fieldcat-col_pos = '2'.
append wa_fieldcat to i_fieldcat.
ENDFORM. " fill_field
*& Form call_fm
text
--> p1 text
<-- p2 text
FORM call_fm.
v_repid = sy-repid.
LC_GLAY-EDT_CLL_CB = 'X'.
CLEAR ls_event_exit.
ls_event_exit-ucomm = gc_refresh. " Refresh
ls_event_exit-after = 'X'.
APPEND ls_event_exit TO lt_event_exit.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = g_status_set
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS = LC_GLAY
IS_LAYOUT =
IT_FIELDCAT = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT = lt_event_exit
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_makt
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_fm
FORM USER_COMMAND *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
data i_RSPARAMS like RSPARAMS occurs 0.
CASE R_UCOMM.
WHEN '&IC1'.
read table i_makt index rs_selfield-tabindex.
SET PARAMETER ID 'MAT' FIELD i_makt-matnr.
if not i_makt-matnr is initial.
call transaction 'MM02' and skip first screen.
endif.
when '&REFRESH'.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
CURR_REPORT = v_repid
IMPORTING
SP =
TABLES
SELECTION_TABLE = i_RSPARAMS
EXCEPTIONS
NOT_FOUND = 1
NO_REPORT = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
submit z_get_refresh with selection-table i_RSPARAMS.
rs_selfield-refresh = 'X'.
ENDCASE.
MOVE '&REFRESH' TO r_ucomm.
ENDFORM.
FORM set_pf_status *
FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
DELETE Rt_extab WHERE fcode = gc_refresh.
SET PF-STATUS 'STANDARD_FULLSCREEN' OF PROGRAM 'SAPLKKBL'
EXCLUDING Rt_extab.
*SET PF-STATUS 'STANDARD' EXCLUDING rt_extab.
SET TITLEBAR sy-tcode.
ENDFORM. -
How to get check box in alv grid list output
hi gurus,
can anyone inform me
how to get check box in alv output it should not be a pop up window
thank you
regards
kals.or
hi go through the fallowing code.
code*&----
*& Report YGS_ALV_BOM *
REPORT YGS_ALV_BOM .
TABLES : MAST,STKO,STPO.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF TY_MAST,
CHECK_BOX,
MATNR TYPE MAST-MATNR,
WERKS TYPE MAST-WERKS,
STLAN TYPE MAST-STLAN,
STLNR TYPE MAST-STLNR,
STLAL TYPE MAST-STLAL,
END OF TY_MAST.
TYPES : BEGIN OF TY_STKO,
STLTY TYPE STKO-STLTY,
STLNR TYPE STKO-STLNR,
STLAL TYPE STKO-STLAL,
STKOZ TYPE STKO-STKOZ,
BMENG TYPE STKO-BMENG,
BMEIN TYPE STKO-BMEIN,
END OF TY_STKO.
TYPES : BEGIN OF TY_STPO,
LIGHTS,
STLTY TYPE STPO-STLTY,
STLNR TYPE STPO-STLNR,
STLKN TYPE STPO-STLKN,
STPOZ TYPE STPO-STPOZ,
IDNRK TYPE STPO-IDNRK,
MENGE TYPE STPO-MENGE,
MEINS TYPE STPO-MEINS,
END OF TY_STPO.
DATA : IT_MAST TYPE TABLE OF TY_MAST,
WA_MAST TYPE TY_MAST,
IT_STKO TYPE TABLE OF TY_STKO,
WA_STKO TYPE TY_STKO,
IT_STPO TYPE TABLE OF TY_STPO,
WA_STPO TYPE TY_STPO.
DATA : lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_layout TYPE slis_layout_alv,
ls_event TYPE slis_alv_event,
lt_event TYPE slis_t_event,
it_sortinfo type slis_t_sortinfo_alv,
ls_header TYPE slis_listheader,
lt_header TYPE slis_t_listHEADER.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS : S_MATNR FOR MAST-MATNR.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELDCAT USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form GET_DATA .
REFRESH : IT_MAST.
SELECT MATNR
WERKS
STLAN
STLNR
FROM MAST
INTO CORRESPONDING FIELDS OF TABLE IT_MAST
WHERE MATNR IN S_MATNR.
endform. " GET_DATA
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'MATNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'MATNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'WERKS'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'WERKS'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
form BUILD_LAYOUT .
CLEAR LS_LAYOUT.
LS_LAYOUT-BOX_FIELDNAME = 'CHECK_BOX'.
LS_LAYOUT-BOX_TABNAME = 'IT_MAST'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_MAST
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'YSTATUS' OF PROGRAM SY-REPID
EXCLUDING RT_EXTAB.
ENDFORM.
FORM USER_COMMAND USING RF_UCOMM TYPE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM.
WHEN '&NEXT'.
PERFORM GET_DATA_BOM .
PERFORM BUILD_FIELDCAT_BOM USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT_BOM.
PERFORM DISPLAY_DATA_BOM.
ENDCASE.
ENDFORM.
*& Form GET_DATA_BOM
text
--> p1 text
<-- p2 text
form GET_DATA_BOM .
CLEAR : WA_STPO,
WA_MAST.
REFRESH : IT_STPO.
DATA : IT_CHECK TYPE TABLE OF TY_MAST.
LOOP AT IT_MAST INTO WA_MAST.
IF WA_MAST-CHECK_BOX EQ 'X'.
APPEND WA_MAST TO IT_CHECK.
ENDIF.
ENDLOOP.
SELECT STLTY
STLNR
STLKN
VGKNT
IDNRK
MENGE
MEINS
FROM STPO
INTO CORRESPONDING FIELDS OF TABLE IT_STPO
FOR ALL ENTRIES IN IT_CHECK
WHERE IDNRK EQ IT_CHECK-MATNR.
CLEAR WA_STPO.
LOOP AT IT_STPO INTO WA_STPO.
SELECT SINGLE * FROM MAST WHERE MATNR EQ WA_STPO-IDNRK.
IF SY-SUBRC = 0.
WA_STPO-LIGHTS = '2'.
ELSE.
WA_STPO-LIGHTS = '1'.
ENDIF.
MODIFY IT_STPO FROM WA_STPO.
ENDLOOP.
endform. " GET_DATA_BOM
*& Form BUILD_FIELDCAT_BOM
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT_BOM USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'STLTY'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLTY'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLKN'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLKN'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 4.
L_FIELDCAT-FIELDNAME = 'IDNRK'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'IDNRK'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 5.
L_FIELDCAT-FIELDNAME = 'MENGE'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'MENGE'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT_BOM
*& Form BUILD_LAYOUT_BOM
text
--> p1 text
*<-- p2 text
form BUILD_LAYOUT_BOM .
CLEAR : LS_LAYOUT.
LS_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
LS_LAYOUT-LIGHTS_TABNAME = 'IT_STPO'.
endform. " BUILD_LAYOUT_BOM
*& Form DISPLAY_DATA_BOM
text
--> p1 text
<-- p2 text
form DISPLAY_DATA_BOM .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_BOM'
I_CALLBACK_TOP_OF_PAGE = 'TOP9'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_STPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA_BOM
FORM TOP9 .
CLEAR LS_HEADER.
REFRESH LT_HEADER.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'BILL OF MATERIALS'.
APPEND LS_HEADER TO LT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LT_HEADER
I_LOGO = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
ENDFORM.
FORM USER_COMMAND_BOM USING RF_UCOMM_BOM LIKE SY-UCOMM
SEL_FIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM_BOM.
WHEN '&IC1'.
SET PARAMETER ID 'MAT' FIELD WA_STPO-IDNRK.
SET PARAMETER ID 'WRK' FIELD WA_MAST-WERKS.
SET PARAMETER ID 'CSA' FIELD WA_MAST-STLAN.
CALL TRANSACTION 'CS03' AND SKIP FIRST SCREEN.
ENDCASE.[/code] -
How to get all data from nokia to i5s
how to get all data from nokia E71 to i5s???
if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.
-
How to get the data from multiple nodes to one table
Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
IndraHI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM. -
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).
Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
strtab
USING
'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*& Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
USING ittab TYPE any.
DATA:
h_zaehler TYPE i,
line_str TYPE string,
l_tabellenname(10) TYPE c,
l_arbeitsbereichsname(10) TYPE c,
h_string TYPE string,
h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
<l_arbeits> TYPE ANY,
<feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
CLEAR: h_zaehler, line_str.
line_str = ittab.
DO.
ADD 1 TO h_zaehler.
ASSIGN COMPONENT h_zaehler OF
STRUCTURE <l_arbeits> TO <feldzeiger>.
IF sy-subrc <> 0. EXIT. ENDIF.
WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED. "#EC *
h_string = h_char.
CONCATENATE line_str separator h_string INTO line_str.
ENDDO.
APPEND line_str TO strtab.
ENDLOOP.
ENDFORM. "data_to_string -
How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.
If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/ -
How to get the date of first day of a week for a given date
Hi gurus
can any one say me how to get the date of first day(date of Sunday) of a week for a given date in a BW transformations. For example for 02/23/2012 in source i need to get 02/19/2012(Sunday`s date) date in the result. I can get that start date of a week using BWSO_DATE_GET_FIRST_WEEKDAY function module. But this function module retrieves me the start date as weeks monday(02/20/2012) date. But i need sundays(02/19/2012) date as the start date. So it would be really great if anyone sends me the solution.
Thanks
RavHi,
The simplest way would be to subtract 1 from the date date which you are already getting in transformation routine, but instead of doing that subtraction manually which might need bit of errort, you can simply use another FM to subtract 1 from given date.
RP_CALC_DATE_IN_INTERVAL
Regards,
Durgesh. -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
How to get the date for the first monday of each month
Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AMUse IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
select add_months(date '2013-1-1',level-1) dt
from dual
connect by level <= 12
select dt first_of_the_month,
trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY. -
How to get the Date in a particular format?
Hi,
How to get the Date in the below format? I will be passing the year in my method..
2/10/2003 9:46:52 PM
D/M/YYYY H:M:S A
public Date getDate (String year) {
Here i want to get the Date in this format
2/10/<Passed Year> 9:46:52 PM
ThanksThis is my code
public static Date getCalendar(Calendar calendar,int getYear) {
String formatted_date="";
int year = getYear;
int month = calendar.get(Calendar.MONTH+1);
int day = calendar.get(Calendar.DATE);
int hour = calendar.get(Calendar.HOUR);
int min = calendar.get(Calendar.MINUTE);
int sec = calendar.get(Calendar.SECOND);
int am_pm =calendar.get(Calendar.AM_PM);
formatted_date = month+"/"+day+"/"+year+" "+hour+":"+min+":"+sec+" PM";
System.out.println("formatted_date is "+formatted_date);
o/p : formatted_date is 1/4/2006 1:44:21 PM
SimpleDateFormat dateFormat = new SimpleDateFormat("dd/MM/yyyy");
// DateFormat dateFormat =DateFormat.getDateTimeInstance(DateFormat.SHORT, DateFormat.SHORT);
Date passdate = new Date();
try {
passdate = dateFormat.parse(formatted_date);
} catch (ParseException e) {
System.out.println("Invalid Date Parser Exception "+e.getLocalizedMessage()+"DateFormat is "+dateFormat);
System.out.println("The Date inside the function is "+passdate+"and the year passed is "+year);
o/p : The Date inside the function is Sat Apr 01 00:00:00 IST 2006and the year passed is 2006
return passdate;
Expected O/P is 3/1/2006 1:44:12 PM
}
Maybe you are looking for
-
Select statement on table of objects
My table is like this :- CREATE OR REPLACE TYPE VALUE_T AS OBJECT ( PROPERTYVALUE VARCHAR2(4000) ); CREATE OR REPLACE TYPE PROPERTY_T AS OBJECT ( PROPERTYNAME VARCHAR2(128) , PROPERTYVALUE VALUE_T ); CREATE TABLE TEMP ( SESSIONID , PROPERTY PROPERTY_
-
Hi All, I want to know the output type of SAPscript form F110_FR_CHEQUE. Could anyone help me in this regard?
-
Acrobat Forms - Capital Letters throughout
I have a form in which each field needs to be completed in capital letters, and wanted to force this through validation scripting - but I cannot work out how. Can someone help me please?
-
How to upgrade from OSX 10.5.8 to 10.6 and above?
Need help upgrading from Mac OS X 10.5.8 to new version like 10.6 and above so I can access the Apple App Store and get other version software updgrades.
-
Videos freeze but counter keeps going repeatedly?
Whenever I watch a video online, either using Wi-Fi or LTE, videos seem to freeze but the counter that keeps track of where you are in the video, continues counting for about seven seconds, then stops and then resets and does the same seven seconds,