How to get Configuration (internal object number) during MM01
Hello Masters,
Does anyone know how to get the value of Configuration (internal object number) during MM01 so I can use the function VC_I_GET_CONFIGURATION to get the configurable variant values. I tried to check the MM01 exit EXIT_SAPLCUKO_001 include ZXCUCU02 and it' there but I need to know how to get it so I can use it because in other exits it's not included in the local variable.
Thanks,
Alfred
pl. share the answer with us. U can copy and paste that answer.......so that, some one get the solution, who r hving the same issue.
thanq
Similar Messages
-
How to get the right Serial Number during Pick Release
Please we need your help to get the right serial number => Auto-Allocate on YES, Pick Confirm with NO.
A problem is occurring during the Pick Release process. Custom code has been added to the hook INV_DETAIL_SERIAL_PUB to provide the Pick Release process with the serial number to pick for the item being pick released. The hook works and the Pick Release process picks the correct (specified) serial number. However, at some point later in the Pick Release process the lot number is chosen and the process seems to pick the first lot number it finds available for the item – it does not take into account the serial number provided by the hook. This causes the Pick Release process to fail when the lot number chosen is not the lot number linked to the serial number. Has anyone else encountered this same issue?
An example:
Item ABC123
Serial SER001 – Lot LOT001
Serial SER002 – Lot LOT002
Serial SER003 – Lot LOT003
Item ABC123 is being pick released.
The customised hook provides the Pick Release process with serial SER002.
The Pick Release process correctly uses SER002, but chooses lot LOT001.
thanks!
FranciscoHi,
I guess you have added the code at slightly different place.
Pick Release Process will always allocate lots based on Inventory Picking Rule (or WMS Pick Strategy if you are using WMS).
So if you want to override that you much first delete the MTLT record (inv_trx_util_pub.delete_lot_ser_trx), then insert MTLT with your Lot number (inv_trx_util_pub.insert_lot_trx)..then insert MSNT (inv_trx_util_pub.insert_ser_trx) with your serial number.
Ensure that transaction_temp_id on MSNT should match with SERIAL_TRANSACTION_TEMP_ID on MTLT table.
Thanks,
Hrishi -
Get '500 Internal Server Error' during SIP INVITE - cause 44
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Get ‘500 Internal Server Error’ during SIP INVITE - cause 44
Have you ever seen anything like this before? It usually works, but intermittently, we see calls get rejected. It somehow seems related to high loads on the router. We reduced the occurrences by changing our code to throttle the number of SIP INVITEs we send, but this doesn’t scale well. Once it occurs, the only way to clean it up is to do a shut/no shut on the voice-port associated to SIP INVITE.
Any suggestions on how we can proceed to debug this issue?
BACKGROUND:
Cisco 2811 running (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T3, RELEASE SOFTWARE (fc2)
NAME: "2811 chassis", DESCR: "2811 chassis" PID: CISCO2811
NAME: "9 Port FE Switch on Slot 0 SubSlot 1", DESCR: "9 Port FE Switch" PID: HWIC-D-9ESW
NAME: "WIC/VIC/HWIC 1 Power Daughter Card", DESCR: "9-Port HWIC-ESW Power Daughter Card" PID: ILPM-8
NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 2", DESCR: "Two port E1 voice interface daughtercard" PID: VWIC-2MFT-E1=
NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 3", DESCR: "Two port E1 voice interface daughtercard" PID: VWIC-2MFT-E1=
NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "High Density Voice2 Network module with on board two port interface on Slot 1", DESCR: "High Density Voice2 Network module with on board two port interface " PID: NM-HDV2-2T1/E1
NAME: "2nd generation two port EM voice interface daughtercard on Slot 1 SubSlot 0", DESCR: "2nd generation two port EM voice interface daughtercard" PID: VIC2-2E/M
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 2", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 3", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 5", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
WIRESHARK:
No. Time Source Destination Protocol Info
2 0.057246 10.194.154.136 171.68.115.156 SIP Status: 100 Trying
Frame 2 (471 bytes on wire, 471 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 100 Trying
Message Header
Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
To: <sip:[email protected]:5060>
Date: Wed, 08 Sep 2010 20:47:49 GMT
Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
CSeq: 1 INVITE
Sequence Number: 1
Method: INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
No. Time Source Destination Protocol Info
3 0.071428 10.194.154.136 171.68.115.156 SIP/SDP Status: 183 Session Progress, with session description
Frame 3 (1109 bytes on wire, 1109 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 183 Session Progress
Message Header
Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
To: <sip:[email protected]:5060>;tag=48645D8-1175
Date: Wed, 08 Sep 2010 20:47:49 GMT
Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
CSeq: 1 INVITE
Sequence Number: 1
Method: INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
[Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
[Message: Unrecognised SIP header (Remote-Party-ID)]
[Severity level: Note]
[Group: Undecoded]
Contact: <sip:[email protected]:5060>
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-12.x
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 264
Message Body
Session Description Protocol
Session Description Protocol Version (v): 0
Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 8759 6996 IN IP4 10.194.154.136
Owner Username: CiscoSystemsSIP-GW-UserAgent
Session ID: 8759
Session Version: 6996
Owner Network Type: IN
Owner Address Type: IP4
Owner Address: 10.194.154.136
Session Name (s): SIP Call
Connection Information (c): IN IP4 10.194.154.136
Connection Network Type: IN
Connection Address Type: IP4
Connection Address: 10.194.154.136
Time Description, active time (t): 0 0
Session Start Time: 0
Session Stop Time: 0
Media Description, name and address (m): audio 18710 RTP/AVP 18 101
Media Type: audio
Media Port: 18710
Media Protocol: RTP/AVP
Media Format: ITU-T G.729
Media Format: DynamicRTP-Type-101
Connection Information (c): IN IP4 10.194.154.136
Connection Network Type: IN
Connection Address Type: IP4
Connection Address: 10.194.154.136
Media Attribute (a): rtpmap:18 G729/8000
Media Attribute Fieldname: rtpmap
Media Format: 18
MIME Type: G729
Sample Rate: 8000
Media Attribute (a): fmtp:18 annexb=no
Media Attribute Fieldname: fmtp
Media Format: 18 [G729]
Media format specific parameters: annexb=no
Media Attribute (a): rtpmap:101 telephone-event/8000
Media Attribute Fieldname: rtpmap
Media Format: 101
MIME Type: telephone-event
Sample Rate: 8000
Media Attribute (a): fmtp:101 0-16
Media Attribute Fieldname: fmtp
Media Format: 101 [telephone-event]
Media format specific parameters: 0-16
No. Time Source Destination Protocol Info
4 0.089917 10.194.154.136 171.68.115.156 SIP/SDP Status: 200 OK, with session description
Frame 4 (1116 bytes on wire, 1116 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Message Header
Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
To: <sip:[email protected]:5060>;tag=48645D8-1175
Date: Wed, 08 Sep 2010 20:47:49 GMT
Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
CSeq: 1 INVITE
Sequence Number: 1
Method: INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
[Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
[Message: Unrecognised SIP header (Remote-Party-ID)]
[Severity level: Note]
[Group: Undecoded]
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-12.x
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 264
Message Body
Session Description Protocol
Session Description Protocol Version (v): 0
Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 8759 6996 IN IP4 10.194.154.136
Owner Username: CiscoSystemsSIP-GW-UserAgent
Session ID: 8759
Session Version: 6996
Owner Network Type: IN
Owner Address Type: IP4
Owner Address: 10.194.154.136
Session Name (s): SIP Call
Connection Information (c): IN IP4 10.194.154.136
Connection Network Type: IN
Connection Address Type: IP4
Connection Address: 10.194.154.136
Time Description, active time (t): 0 0
Session Start Time: 0
Session Stop Time: 0
Media Description, name and address (m): audio 18710 RTP/AVP 18 101
Media Type: audio
Media Port: 18710
Media Protocol: RTP/AVP
Media Format: ITU-T G.729
Media Format: DynamicRTP-Type-101
Connection Information (c): IN IP4 10.194.154.136
Connection Network Type: IN
Connection Address Type: IP4
Connection Address: 10.194.154.136
Media Attribute (a): rtpmap:18 G729/8000
Media Attribute Fieldname: rtpmap
Media Format: 18
MIME Type: G729
Sample Rate: 8000
Media Attribute (a): fmtp:18 annexb=no
Media Attribute Fieldname: fmtp
Media Format: 18 [G729]
Media format specific parameters: annexb=no
Media Attribute (a): rtpmap:101 telephone-event/8000
Media Attribute Fieldname: rtpmap
Media Format: 101
MIME Type: telephone-event
Sample Rate: 8000
Media Attribute (a): fmtp:101 0-16
Media Attribute Fieldname: fmtp
Media Format: 101 [telephone-event]
Media format specific parameters: 0-16
No. Time Source Destination Protocol Info
7 1.661867 10.194.154.136 171.68.115.156 SIP Status: 100 Trying
Frame 7 (469 bytes on wire, 469 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 100 Trying
Message Header
Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
To: <sip:[email protected]:5060>
Date: Wed, 08 Sep 2010 20:47:51 GMT
Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
CSeq: 1 INVITE
Sequence Number: 1
Method: INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
No. Time Source Destination Protocol Info
8 1.676056 10.194.154.136 171.68.115.156 SIP/SDP Status: 183 Session Progress, with session description
Frame 8 (1107 bytes on wire, 1107 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 183 Session Progress
Message Header
Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
To: <sip:[email protected]:5060>;tag=4864C1C-10F8
Date: Wed, 08 Sep 2010 20:47:51 GMT
Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
CSeq: 1 INVITE
Sequence Number: 1
Method: INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
[Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
[Message: Unrecognised SIP header (Remote-Party-ID)]
[Severity level: Note]
[Group: Undecoded]
Contact: <sip:[email protected]:5060>
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-12.x
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 264
Message Body
Session Description Protocol
Session Description Protocol Version (v): 0
Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 7991 6854 IN IP4 10.194.154.136
Owner Username: CiscoSystemsSIP-GW-UserAgent
Session ID: 7991
Session Version: 6854
Owner Network Type: IN
Owner Address Type: IP4
Owner Address: 10.194.154.136
Session Name (s): SIP Call
Connection Information (c): IN IP4 10.194.154.136
Connection Network Type: IN
Connection Address Type: IP4
Connection Address: 10.194.154.136
Time Description, active time (t): 0 0
Session Start Time: 0
Session Stop Time: 0
Media Description, name and address (m): audio 17660 RTP/AVP 18 101
Media Type: audio
Media Port: 17660
Media Protocol: RTP/AVP
Media Format: ITU-T G.729
Media Format: DynamicRTP-Type-101
Connection Information (c): IN IP4 10.194.154.136
Connection Network Type: IN
Connection Address Type: IP4
Connection Address: 10.194.154.136
Media Attribute (a): rtpmap:18 G729/8000
Media Attribute Fieldname: rtpmap
Media Format: 18
MIME Type: G729
Sample Rate: 8000
Media Attribute (a): fmtp:18 annexb=no
Media Attribute Fieldname: fmtp
Media Format: 18 [G729]
Media format specific parameters: annexb=no
Media Attribute (a): rtpmap:101 telephone-event/8000
Media Attribute Fieldname: rtpmap
Media Format: 101
MIME Type: telephone-event
Sample Rate: 8000
Media Attribute (a): fmtp:101 0-16
Media Attribute Fieldname: fmtp
Media Format: 101 [telephone-event]
Media format specific parameters: 0-16
No. Time Source Destination Protocol Info
10 1.700567 10.194.154.136 171.68.115.156 SIP Status: 100 Trying
Frame 10 (471 bytes on wire, 471 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 100 Trying
Message Header
Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100f04-2fde97a9
From: <sip:[email protected]:5060>;tag=82f4d30-9c7344ab-13c4-45026-41c-5c20b753-41c
To: <sip:[email protected]:5060>
Date: Wed, 08 Sep 2010 20:47:51 GMT
Call-ID: 80e5320-9c7344ab-13c4-45026-41c-7fbe4865-41c
CSeq: 1 INVITE
Sequence Number: 1
Method: INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
No. Time Source Destination Protocol Info
11 1.726376 10.194.154.136 171.68.115.156 SIP/SDP Status: 200 OK, with session description
Frame 11 (1114 bytes on wire, 1114 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Message Header
Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
To: <sip:[email protected]:5060>;tag=4864C1C-10F8
Date: Wed, 08 Sep 2010 20:47:51 GMT
Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
CSeq: 1 INVITE
Sequence Number: 1
Method: INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
[Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
[Message: Unrecognised SIP header (Remote-Party-ID)]
[Severity level: Note]
[Group: Undecoded]
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-12.x
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 264
Message Body
Session Description Protocol
Session Description Protocol Version (v): 0
Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 7991 6854 IN IP4 10.194.154.136
Owner Username: CiscoSystemsSIP-GW-UserAgent
Session ID: 7991
Session Version: 6854
Owner Network Type: IN
Owner Address Type: IP4
Owner Address: 10.194.154.136
Session Name (s): SIP Call
Connection Information (c): IN IP4 10.194.154.136
Connection Network Type: IN
Connection Address Type: IP4
Connection Address: 10.194.154.136
Time Description, active time (t): 0 0
Session Start Time: 0
Session Stop Time: 0
Media Description, name and address (m): audio 17660 RTP/AVP 18 101
Media Type: audio
Media Port: 17660
Media Protocol: RTP/AVP
Media Format: ITU-T G.729
Media Format: DynamicRTP-Type-101
Connection Information (c): IN IP4 10.194.154.136
Connection Network Type: IN
Connection Address Type: IP4
Connection Address: 10.194.154.136
Media Attribute (a): rtpmap:18 G729/8000
Media Attribute Fieldname: rtpmap
Media Format: 18
MIME Type: G729
Sample Rate: 8000
Media Attribute (a): fmtp:18 annexb=no
Media Attribute Fieldname: fmtp
Media Format: 18 [G729]
Media format specific parameters: annexb=no
Media Attribute (a): rtpmap:101 telephone-event/8000
Media Attribute Fieldname: rtpmap
Media Format: 101
MIME Type: telephone-event
Sample Rate: 8000
Media Attribute (a): fmtp:101 0-16
Media Attribute Fieldname: fmtp
Media Format: 101 [telephone-event]
Media format specific parameters: 0-16
No. Time Source Destination Protocol Info
13 1.727645 10.194.154.136 171.68.115.156 SIP Status: 500 Internal Server Error
Frame 13 (526 bytes on wire, 526 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 500 Internal Server Error
Message Header
Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100f04-2fde97a9
From: <sip:[email protected]:5060>;tag=82f4d30-9c7344ab-13c4-45026-41c-5c20b753-41c
To: <sip:[email protected]:5060>;tag=4864C50-3C3
Date: Wed, 08 Sep 2010 20:47:51 GMT
Call-ID: 80e5320-9c7344ab-13c4-45026-41c-7fbe4865-41c
CSeq: 1 INVITE
Sequence Number: 1
Method: INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=44
Reason Protocols: Q.850
Cause: 44(0x2c)[Requested circuit/channel not available]
Content-Length: 0
Thanks!
-JohnSince it appears you are a Cisco Employee, my recommendation is that you use the many internal resource available to you (including, but not limited to) , like TAC access, internal forums, team leaders, etc.
This not to give the casual reader, the impression that the best source of support at Cisco is a customer's public forum. -
How to get a service notification number for given serial number
Please, someones know how to get a service notification number based on serial number.
In our process the notification can be created as first step (IW51) or can be created starting from service order (IW32).
Thanks in advance.
LucaHi pooja,
actually standard service request numbers are configured in spro->crm->transactions->Settings for Service Requests->Number Ranges. here they are maintain service request,incident,problem number ranges..
so when ever your creating any service request then that number range will appear in that object id.
you have to get that object id in your custom field get_method and based on that you have to change your number..
example:
current = me->bo.
current->get_property_as_string( EXPORTING iv_attr_name = 'OBJECTI_ID' RECEIVING rv_result = lv_id ).
here you will get object_id based on that you have to write your own logic to display custom value.
" write your custom logic to populate custom field. pass that custom field value into returning parameter.
value = custom_value.
Thanks & Regards,
Srinivas. -
How to get an initialised Object according to it's name?
How to get an initialised Object according to it's name?
For example I have 5 HashSets (initialised, with data) hs1 hs2 hs3 hs4 and hs5
Sometimes I want to get one of them according to it's number : "hs"+number
How this can be done (method class.forName is dedicated to antoher thing).
ThanksI forgot to write that I do not want to use a Map :)
(sure, it' possible via Map, no question).
But in Perl, for example, I could simply write
$ab="col" + "or";
$color="Beidge";
and than I can use address to a variable $color in
such a way : $$ab
... So if a Map is an only way... than it will be a
Map... pity..I do not really know Perl so I can not comment on it; but, are there any compiled languages (at least compiled to the degree of Java) that support this construct? All of the programming languages that I can think of that have this construct are more along the lines of scripting languages.
Just curious. -
How to get an ArrayList Object in servlet from JSP?
How to get an ArrayList Object in servlet from JSP?
hi all
please give the solution for this without using session and application...
In test1.jsp file
i am setting values for my setter methods using <jsp:usebean> <jsp:setproperty> tags as shown below.
After that i am adding the usebean object to array list, then using request.setAttribute("arraylist object")
---------Code----------
<jsp:useBean id="payment" class="com.common.PaymentHandler" scope="request" />
<jsp:setProperty name="payment" property="strCreditCardNo" param="creditCardNumber" />
<%-- <jsp:setProperty name="payment" property="iCsc" param="securityCode" /> --%>
<jsp:setProperty name="payment" property="strDate" param="expirationDate" />
<jsp:setProperty name="payment" property="strCardType" param="creditCardType" />
<%--<jsp:setProperty name="payment" property="cDeactivate" param="deactivateBox" />
<jsp:setProperty name="payment" property="fAmount" param="depositAmt" />
<jsp:setProperty name="payment" property="fAmount" param="totalAmtDue" /> --%>
<jsp:useBean id="lis" class="java.util.ArrayList" scope="request">
<%
lis.add(payment);
%>
</jsp:useBean>
<%
request.setAttribute("lis1",lis);
%>
-----------Code in JSP-----------------
In testServlet.java
i tried to get the arraylist object in servlet using request.getAttribute
But I unable to get that arrayObject in servlet.....
So if any one help me out in this, it will be very helpfull to me..
Thanks in Advance
EdwardHi,
Im also facing the similar problen
pls anybody help..
thax in advance....
Litty -
How to get the UserTransaction object in stateless session bean
Hi, I am using jboss server and jdk5 version and using EJB.
My Application flow :
JSP à Action(Struts) à Service Locator à Session bean à Entity Bean(cmp) à DB.
I tried to get the UserTransaction object in my Action. Its my code.
InitialContext ctx = new InitialContext();
UserTransaction uTrans = (UserTransaction) ctx.lookup("java:comp/UserTransaction");
After used uTrans.begin(),uTrans.commit() and uTrans. rollback () also.
Its working fine .
But, I used the the same code inside in my session bean its not working.
Stateless Session Manager Bean code :
public class SampleManagerBean implements SessionBean {
public void ejbCreate() throws CreateException { }
public void ejbRemove() { }
public void ejbActivate() { }
public void ejbPassivate() { }
public void setSessionContext(SessionContext sessionContext) {
this.sessionContext = sessionContext;
public void createSample() throws EJBException
try{
InitialContext ctx = new InitialContext();
UserTransaction ut = (UserTransaction) ctx.lookup("java:comp/UserTransaction");
}catch(Exception e) {
System.out.println( Exception === > +e)
Its throws the error ie: javax.naming.NameNotFoundException: UserTransaction not bound
How to get the UserTransaction object in my session bean. Kindly give solution the above errors.
- Thendralfirst of all, you could just use sessionContext.getUserTransaction(). however, that would only work if your bean is using bean-managed transactions. the default is container-managed transaction, in which case you cannot get a UserTransaction object. if you want to manage transactions, you need to add the TransactionManagementType.BEAN annotation to your ejb.
-
How to get the view Object in UserDefined Action
Hi All,
Any body tell me how to get the view object , like the view object avilable in the wdDoModifyView() method as parameter.
I have requirement like, i want to change the , no of rows displaying in the table should be changed at the runtime based onthe no of rows selected in the dropdown box.
The action which i created will be assigned to that dropdown box, on select of the available option, i will get the view object and change the properties of the "maxrows" of the table .
so for getting the view object in the the Action methods tell me what is the procedure for getting the current view object.Hello Vishal,
Simply create a value attribute (say rowCount) of type 'integer' and bind it to the 'visibleRowCount' property of your table. Then, in the actionHandler get the value from the UI element (in your case, I guess it is drop down) and set it to the attribute 'rowCount' like this.
wdContext.currentContextElement.setRowCount(
wdContext.current<nodeElement>.set<AttributeBound toDropDown>);
Bala -
How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "?
Hello SAP Guru's,
How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "? We have implemented SAP ECC 6.0 EHP4 version in the organization. If anybody have any idea, need help .
Thanks in Advance.
Prashant KunjirHave a look at the following note:-
Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed. Otherwise, you need to raise an OSS message with SAP.
G. Lakshmipathi -
How to get the current month number
Hi everyone,
Does anybody know how to get the current month number in Oracle Discoverer Worksheet calculation?
I try to use EUL_DATE_TRUNC(CURRENT_DATE, 'MM'), but instead I got 01-AUG-00.
If I change the data display format to MM, it will give me "08" but if I use TO_NUMBER function to convert it to number I get error "invalid number"
Is there anyway to get the current month value in number? ThanksScott,
Thank you so much! It works perfectly! :)
Hope you have a great day ahead!
Cheers,
Angeline -
How to get the profile object in simple java class (Property accessor)
Hi All,
Please guide me how to get the profile object in simple java class (Property accessor) which is extending the RepositoryPropertyDescriptor.
I have one requirement where i need the profile object i.e i have store id which is tied to profile .so i need the profile object in the property accessor of the SKU item descriptor property, which is extending RepositoryPropertyDescriptor.
a.I dont have request object also to do request.resolvename.
b.It is not a component to create setter and getter.It is simple java class which is extending the RepositoryPropertyDescriptor.
Advance Thanks.Iam afraid you might run into synchronization issues with it. You are trying to get/set value of property of a sku repository item that is shared across various profiles.
Say one profile A called setPropertyValue("propertyName", value).Now another profile B accesses
getPropertyValue() {
super.getPropertyValue() // Chance of getting value set by Profile A.
// Perform logic
There is a chance that profile B getting the value set by Profile A and hence inconsistency.
How about doing this way??
Create PropertyDescriptor in Profile (i.e user item descriptor), pass the attribute CustomCatalogTools in userProfile.xml to that property.
<attribute name="catalogTools" value="atg.commerce.catalog.CustomCatalogTools"/>
getPropertyValue()
//You have Profile item descriptor and also storeId property value.
// Use CustomCatalogTools.findSku();
// Use storeId, profile repository item, sku repository item to perform the logic
Here user itemdescriptor getPropertyValue/setPropertyValue is always called by same profile and there is consistency.
-karthik -
How to get the unoccupied material number in a number range
How to get the unoccupied material number in a number range.for example, I wang to get a number between 1500000 and 1599990 which is unoccupied as my material number to be created. Is ther any FM or codes?
Dear,
You can get this information from Tcode SNUM or you can access database table NRIV. -
How to get the 4 digit number associated with a SAP icon ( ICON_MAIL )
Hi Friends,
Could anyone please tell me how to get the 4 digit number associated with a SAP icon ( ICON_MAIL ).
eg: - For ICON_GREEN_LIGHT the four digit id code is '@08@' (which you can get from ICON table )and the associated 4 digit number is'1003'.
Similarly I want to get the 4 digit number for ICON_MAIL(e-mail icon)
<b><REMOVED BY MODERATOR></b>
Ashiq
Message was edited by:
Alvaro Tejada GalindoYou can use this report...It's not mine...
REPORT zdummy_atg_2.
TABLES: ICON.
INCLUDE <ICON>.
FIELD-SYMBOLS: <F>.
SELECT * FROM ICON.
ASSIGN (ICON-NAME) TO <F>.
WRITE: /(5) <F>, 20 '@',21 ICON-ID+1(2),23 '@',ICON-OLENG,
ICON-BUTTON,ICON-STATUS,ICON-MESSAGE,ICON-FUNCTION,
ICON-NAME.
ENDSELECT.
Greetings,
Blag. -
How to get the iphone serial number in application?
hello, everyone
i really want to konw how to get the iphone serial number in aplication ? As it's different from uniqueIdentifier ....
thank youMichele is correct - sneep will help you get the serial from the running domain on the M3000 ,
and it is a good idea to install STB on your machines.
If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
I believe that on this platform, sneep gets the serial from the output of prtconf.
There is a minor correction to be made :
After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
man -M /opt/SUNWsneep/man sneep
with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
that you will find on the physical serial tag.
The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command. -
How to get customer-specific objects into PCUI ?
Hello,
we want to get an Z-table as tab page of the business partner-application into PCUI. It should 'only' be possible to create new entries - today there is no need to modify or delete records.
Does there exist something like a "cookbook" on this task or has anyone of you experience how to get customer-specific objects (without using EEWB) into PCUI ?
Thanks in advance
MartinOption 1:
If you are good in ABAP.
You can add new tab in which create a new Field group. Assign it to a model access clas in which handle the table update.You can get the details in PCUI cookbook itsel.
Option 2:
If you are good at java
Develop an FM to update the table.
Call the FM from webdynpro
Include this webdynpro as HTML viewer in PCUI.
Regards,
Abdul Raheem S
Maybe you are looking for
-
Small Business SPA504G over VPN?
Hello, i recently installed a PPTP server on the PBX machine to connect, i was wondering how to make our SPA504G phones to connect to it, i just have no clue, any windows machine can setup a network connection, but with the IP Phone im completely at
-
HELP!: JBO-33001 bc4j.xcfg not found against oc4j 9.0.3
I'm using JDev 9.0.2. Make BC4J project and BC4J JSP application. Then I deployed to remote OC4J server. BC4J JSP works on remote OC4J 9.0.2 but fails on remote OC4J 9.0.3 by JBO-33001. Why?? Of course, I set up the BC4J runtime on both version of OC
-
My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?
-
How do I install Lightroom on my new MacBook?
I have "trashed" it on my old computer, but I still can't download it from "My downloads". Tech support was NOT helpful at all. They told me to trash the application on my old computer so now I don't have access at all! Please help!
-
Ok, so I need to reset my security questions because when I redeemed my itunes gift cards, It suddenly pops up with 'You need to enter your security questions' and I'm about three seconds away from table flipping because this the most stupidest syste