How to get downoloaded annimation working what do I need to install
Please watch my short screencast. I downloaded a number of annimations from video blocks and I'm not sure what I need to import in AE cs6 windows 7 to get this annimation up and running. I should have no problem replacing text and so but I need a step by step of how to make this work Please Help. http://www.screencast.com/t/81vWPKuk6VG0
I looked at their "Instructions" I talks about compatability, logo placement , sountrack, text changes--nothing that indicates what to import!
felt there was no need to show them as I assumed people would realize that's the first thing I would look at b4 asking for help--guess I was wrong
Similar Messages
-
Satellite L500 - How to get FN keys working on Windows 7 64bit?
Hi
I needed to reinstall Windows 7 on a Satellite L500 but I can't get the FN keys to work. Would anyone here be able to give any ideas on how to get this to work?
casHello
You need Toshiba Value Added Package and Flash Cards Support Utility. Both you can download here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Use also the forum search, this question was asked 100 times before. -
My itunes store won't open. Any suggestions on how to get this to work? I've already downloaded the newest version of itunes. I'm also not sure what Mac operating system I have..
To find the version of Mac OS X on your computer, all you have to do is click the Apple logo and then About this Mac. For more info, take a look at this doc -> Finding your OS X version and build information
Do you see an error when you try to open the iTunes Store on your Mac?
This Apple doc is a good place to start -> iTunes: Advanced iTunes Store troubleshooting -
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
D-Link DCS 900W - how to get it to work on my Mac?
i'm new to network cameras - but i need to set up a surveillance system in my home to monitor my home while i am away. i recently returned a D-Link DCS 950G because this latest model didn't work with any other browser but IE6. Now i've got a DCS 900W, and ancient model which took me 2 days of frantic phone calls to locate, because this model appears in the list for both Evocam and Security Spy.
i am none the wiser on how to get it set up - i think i need to initialise it right (duh?)? and i am drowning in the sea!
can any hero help this dumb maiden set up the network cameras from step one to hey presto?i'm a little crazy now... i've got 4 macs..
1) problems setting up camera:
i've tried to set up my camera to work with two of my macs but could only get it running on the powermac g4 (adsl modem Aztech305). i've tried to get it going on my iBook g3 (Linksys routerWRT54G) but to no avail. i tried the same things but still nothing happened in the iBook. i couldn't logon to the IP of my camera to set it up on the iBook but the powermac g4 was ok. my g4 has an adsl modem and uses a different internet service provider from my iBook which is hooked up to a wireless router using a network shared by my 2 other macs. i was hoping to get the camera running wirelessly (hence the 900W).
2) with the camera set up & running on the powermac g4, i can view everything on the g4 of course, buti can't view it remotely from my other macs.
i think i am doing something wrong here but i don't know what? -
How to get showDocument to work
I tried to pop up a broswer to show an image using showDocument. However, I tried it with the 2 methods as in the attachment, and they both failed. (those 2 methods were tried at different times)
Besides, I found in the Java Doc (http://java.sun.com/j2se/1.4.2/docs/api/java/applet/AppletContext.html) saying under the showDocument that An applet viewer or browser is free to ignore .
Can you please kindly tell me what that mean? And can you teach me how to get the showDocument works? Thank you very much.
public class ccdApp extends Applet
public void init()
try
try {
// Method 1
URL url = new URL(getDocumentBase(), "http://10.1.100.120/png/DSC01400.png");
getAppletContext().showDocument(url,"_blank");
// Method 2
getAppletContext().showDocument
(new URL( "http://10.1.100.120/png/DSC01400.png"), "_blank");
catch (MalformedURLException e) {
e.printStackTrace();
}Help, I tried to get this code to work I found on how to use showDocument()?
import java.applet.Applet;
import java.net.*;
import java.awt.*;
import java.awt.event.*;
* <applet code=ShowDocApplet.class width = 300 height=300> <parame
* name="target" value="b"> <parame name="url" value="http://www.yahoo.com">
* </applet>
public class ShowDocApplet extends Applet {
public void init() {
final Button act = new Button("Show Doc");
// For Testing purpose
final String url = "http://java.sun.com";
final String target = "_blank";
* //For ur Application final String url = getParameter("url"); final
* String target = getParameter("target");
act.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
try {
getAppletContext().showDocument(new URL(url), target);
System.out.println("Made it to try block");
} catch (MalformedURLException e) {
showStatus(url + " NOT FOUND");
add(act);
Note: I am using Eclipse 3.2 and I got it to compile and to run as an applet, but when I push the button nothing at all happens. Help -
How to get Messages to work with a proxy server?
at work we use a proxy server.
some icloud programs work, but Messages does not.
any idea how to get this to work through a proxy server?
thanks.Hi,
Now I feel really silly.
I remember the pane looking like this though:-
As there used to be two iChat forums here at Apple Support Communities and the older iChat 2.1 one has disappeared I am not sure how many threads might be available for scrutiny on this matter.
AS I said I don't ever recall someone reporting that they got it to work.
During early version of iChat it was found that the AIM server would accept a login on almost any port.
It became popular to suggest port 443 as this was a well known port known to be open on most routers "out-of-the-box" and likely to be open in campus situations where students may not have any control over what ports were open.
An AIM Login can also do "Direct IMs" for which is switches to port 5190 on the UDP Protocol.
At this point the chat is peer to peer.
It does this if you send a pic in the Chat or send a file.
It uses port 5190 for this no matter what is used for the Login.
7:27 PM Thursday; May 9, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help
It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1 -
I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.
-
i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!
Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control. -
Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)
Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it
-
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
Maybe you are looking for
-
Apple ID is not working in mac app store
When I try to sign in and/or buy at the Mac App Store on my Mac desktop, I get an "An Unknown Error Has Occured" every time (after restarts, password reset, etc). My Apple ID works on my iPhone, iPad, iTunes, here on Apple Communities, and I can see
-
Hello, First the setup procedure seems to work, but the control files (system.dbf, undo.dbf, sysaux.dbf, users.dbf) are not created. Here my config: - Windows XP prof. SP2. - Logged in locally with admin rights and installing locally (no Domain). - t
-
Installing drivers for Windows XP leads to "fatal system error"
Hello, I am trying to install the drivers for Windows XP on my new MacBook, using boot camp from my Mac OS X install cd (version 10.6.3). The option comes up for me to either "repair" or "remove" drivers. I clicked on repair, and after about 5 min of
-
We are on version 11.1.1 of HFM and we are trying to use the feature where you can batch reports. We can get the batches set up and they run but it seems that when we try to use the bursting options, we can't get any emails to go out. We followed the
-
I have purchased Acrobat X1 Pro, I have downloaded and have received an order number by email but no email giving a serial no. Also can sign in and find account details but can't find My Adobe to access the serial no