How to get Duotone Mode Ink List Names?

Hi All,
I need to get the list of Ink Names in the duotone mode of the document
Using the Java Script / Windows / Photoshop CS3
(Example: PMS 185, PMS 230....)
Please give suggestion......
Regards
William

How big are your eps files? Where are they located?
The script should not take long unless your system's disk I/O is slow - such as a slow network server.
On my system reading a 18mb Photoshop EPS file with a 8bit preview on a local drive takes less than a second to display the inks used.
At any rate I don't know if there is another way to find the inks using Photoshop. That info does not seem to be part of the Document's descriptor. If the duotones where created in Photoshop the inks are also in the Photoshop resource section of the file. It might be possible to write a script to parse that section so the script could work with psd as well as eps duotones but I don't think it would be any faster.

Similar Messages

How to get alternative strings in list of strings.

Hi experts,
how to get alternative strings in list of strings.
eg
'country1, italy, country2, india, country3, paris, country4, scottland, country5, rome'
from the above list i need to fetch all the countries and their names separately.
like country1, country2, country3, country4, country5
italy, india, paris, scottland, rome
i am trying the above one in the below fashion
SELECT SUBSTR
          ('country1, italy, country2, india, country3, paris, country4, scottland, country5, rome',
           1,
             INSTR
                ('country1, italy, country2, india, country3, paris, country4, scottland, country5, rome',
                 1,
                 1
           - 1
FROM DUAL
can you please any one help me

If you want the data to be more stuctured, and useful:
col col_name for a20
col col_value for a20
var inlist VARCHAR2(2000)
exec :inlist := 'country1, italy, country2, india, country3, paris, country4, scottland, country5, rome';
exec :inlist := replace(:inlist,' ')
select max(decode(mod(lvl,2),1,value)) col_name
      ,max(decode(mod(lvl,2),0,value)) col_value
from   (select substr(:InList,start_pos+1, end_pos-start_pos-1) value
              ,lvl
        from   (select :InList
                      ,case when level = 1 then
                         0
                       else
                         instr(:InList,',',1,level-1)
                       end start_pos
                       ,case when instr(:InList,',',1,level) = 0
                         then length(:InList)+1
                       else
                         instr(:InList,',',1,level)
                       end   end_pos
                     ,level lvl
                from   dual
                connect by level <=length(:InList)-length(replace(:InList,','))+1
group by ceil(lvl/2)
order by 1;
COL_NAME             COL_VALUE
country1             italy
country2             india
country3             paris
country4             scottland
country5             rome
Untested on 10g
Then you could stragg the rows together ...

Unable to get the SharePoint 2013 List names using Client object model for the input URL

Please can you help with this issue.
We are not able to get the SharePoint 2013 List names using Client object model for the input URL.
What we need is to use default credentials to authenticate user to get only those list which he has access to.
clientContext.Credentials = Net.CredentialCache.DefaultCredentials
But in this case we are getting error saying ‘The remote server returned an error: (401) Unauthorized.’
Instead of passing Default Credentials, if we pass the User credentials using:
clientContext.Credentials = New Net.NetworkCredential("Administrator", "password", "contoso")
It authenticates the user and works fine. Since we are developing a web part, it would not be possible to pass the user credentials. Also, the sample source code works perfectly fine on the SharePoint 2010 environment. We need to get the same functionality
working for SharePoint 2013.
We are also facing the same issue while authenticating PSI(Project Server Interface) Web services for Project Server 2013.
Can you please let us know how we can overcome the above issue? Please let us know if you need any further information from our end on the same.
Sample code is here: http://www.projectsolution.com/Data/Support/MS/SharePointTestApplication.zip
Regards, PJ Mistry (Email: [email protected] | Web: http://www.projectsolution.co.uk | Blog: EPMGuy.com)

Hi Mistry,
I sure that CSOM will authenticate without passing the
"clientContext.Credentials = Net.CredentialCache.DefaultCredentials" by default. It will take the current login user credentials by default. For more details about the CSOM operations refer the below link.
http://msdn.microsoft.com/en-us/library/office/fp179912.aspx
-- Vadivelu B Life with SharePoint

Sharepoint Workflow : how to get document full path + file name into variable?

Hi,
Anybody knows how to get document full path + file name into a variable in Sharepoint 2010 workflow?
Example http://sp1:80/InvoiceQueue/Shared Documents/123.pdf
I am using List Workflow which links to a document library.

Hi SAMSUNG,
According to your description, my understanding is that you want to get the full path of a document in a list workflow.
You can set the variable to the Enconded Absolute URL of the document. The screenshot is my testing. In my testing (in the red area), when the title of a document was equal to the tile of the current item, set a variable to the Enconded Absolute URL of the
document. I used ‘Log to history list’ to check the value of the variable in Workflow History .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to get the dynamic Crosstab header name ?

Hi ,
The crosstab resaults shows as below ,How to get the dynamic Crosstab header name ?
| Countryname |
| Province1 | Province2 |
| here to get CountryName | here to get CountryName |
how to get the Countryname in data ceil?
thanks

Could you please elaborate on your requirement?
You want header to be dynamic?

How to get/capture log-on user name on PC (work station)

Hi,
Colud anyone give me how to get/capture log-on user name on my PC (work station)?
I need to get the infomation by using a function module.
Kind regards,
Hisao

Hi,
TH_USER_INFO shows me terminal ID, IP address and other information. howerver it does't show me log-on user name of OS.
Kind regards,
Hisao

How to get project GUID from project name?

How to get project GUID from project name in Campaign mgmt ?

hello,
have a look in table CGPL_PROJECT.
regards,
Frédéric

I just downloaded 3 podcast items into my iPod shuffle but don't know how to listen to it. It plays the music list but don't know how to get to my podcast list to play it..

I just downloaded 3 podcast items into my iPod shuffle but don't know how to listen to it. It plays the music list but don't know how to get to my podcast list to play it..

jfromnj wrote:
I purchased and downloaded the Family Pack of IWork. I recently purchased another computer (MacBook Pro) and I want to be able to use IWork on the new
computer but don't know how to go about it. The only thing on the Apple home page is to purchase either the item or trial pack. I don't think I should have to purchase anything since a family pack covers 5 computers in the same household. Please, if someone knows how to go about this and what I need to do so please let me know. Thank you.
You didn't keep the download for future use?

How to get data from subsites list of SharePoint 2010 in ssrs

Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
Kishore

Hi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT

How to get items from a list that has more items than the List View Threshold?

I'm using SharePoints object model and I'm trying to get all or a subset of the items from a SharePoint 2010 list which has many more items than the list view threshold (20,000+) using the SPList.GetItems() method. However no matter what I do the SPQueryThrottledException
always seems to be thrown and I get no items back.
I'm sorting based on the ID field, so it is indexed. I've tried setting the RowLimit property on the SPQuery object(had no effect). I tried specifying the RowLimit in the SPQuerys ViewXml property, but that still throws a throttle exception. I tried using the
ContentIterator as defined here:http://msdn.microsoft.com/en-us/library/microsoft.office.server.utilities.contentiterator.aspx,
but that still throws the query throttle exception. I tried specifying the RowLimit parameter in the ProcessListItems functions, as suggested by the first comment here:http://tomvangaever.be/blogv2/2011/05/contentiterator-very-large-lists/,
but it still throws the query throttle exception. I tried using GetDataTable instead, still throws query throttle exception. I can't run this as admin, I can't raise the threshold limit, I can't raise the threshold limit temporarily, I can't override the lists
throttling(i.e. list.EnableThrottling = false;), and I can't override the SPQuery(query.QueryThrottleMode = SPQueryThrottleOption.Override;). Does anyone know how to get items back in this situation or has anyone succesfully beaten the query throttle exception?
Thanks.
My Query:
<OrderBy>
<FieldRef Name='ID' Ascending='TRUE' />
</OrderBy>
<Where>
<Geq><FieldRef Name='ID' /><Value Type='Counter'>0</Value></Geq>
</Where>
My ViewXml:
<View>
<Query>
<OrderBy><FieldRef Name='ID' Ascending='TRUE' /></OrderBy>
<Where>
<Geq><FieldRef Name='ID' /><Value Type='Counter'>0</Value></Geq>
</Where>
</Query>
<RowLimit>2000</RowLimit>
</View>
Thanks again.

I was using code below to work with 700000+ items in the list.
SPWeb oWebsite = SPContext.Current.Web;
SPList oList = oWebsite.Lists["MyList"];
SPQuery oQuery = new SPQuery();
oQuery.RowLimit = 2000;
int intIndex = 1;
do
SPListItemCollection collListItems = oList.GetItems(oQuery);
foreach (SPListItem oListItem in collListItems)
//do something oListItem["Title"].ToString()
oQuery.ListItemCollectionPosition = collListItems.ListItemCollectionPosition;
intIndex++;
} while (oQuery.ListItemCollectionPosition != null);
Oleg
Hi Oleg, thanks for replying.
The problem with the code you have is that your SPQuery object's QueryThrottleMode is set to default. If you run that code as a local admin no throttle limits will be applied, but if you're not admin you will still have the normal throttle limits. In my
situation it won't be run as a local admin so the code you provided won't work. You can simulate my dilemma by setting the QuerryThrottleMode property to SPQueryThrottleOption.Strict, and I'm sure you'll start to get SPQueryThrottledException's
as well on that list of 700000+ items.
Thanks anyway though

How to Get checkbox value when List value changed in classic report

hi ,
i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
take value of checkbox item and show it in message .
SQL for report
SELECT
'<INPUT TYPE="checkbox" NAME="f01" VALUE="'
||SEQ
||'">' SEQ,
ID,
DEPT_NO,
EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
i create JavaScript on the page
function test(pThis) {
var f01_value = $('select[name="f01"]').value;
alert('#SEQ : '+ f01_value);
</script>
I call this javascript function when list change but the value undefined..
My Question :
How can get this value Or any value of item in reports
regards
Ahmed

Hi Ahmed,
>
i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
take value of checkbox item and show it in message .
SQL for report
SELECT
'<INPUT TYPE="checkbox" NAME="f01" VALUE="'
||SEQ
||'">' SEQ,
ID,
DEPT_NO,
EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
>
You should not create checkboxes like this. Either use the APEX_ITEM.CHECKBOX2 API or change the Column Type to Simple Checkbox.
>
now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
i create JavaScript on the page
function test(pThis) {
var f01_value = $('select[name="f01"]').value;
alert('#SEQ : '+ f01_value);
</script>
>
name="f01" returns an array, what you need is single element value.
Try
<script type="text/javascript>
function test(pThis) {
var f01_value = $v(pThis);
alert('#SEQ : '+ f01_value);
</script>
{code}
{quote}
I call this javascript function when list change but the value undefined..
My Question :
How can get this value Or any value of item in reports
{quote}
Depends in how you are invoking/triggering the change event. Are you using DA or have you written an "onchange" event on the element?
Cheers,

Phpmysql server behaviour (How to get date from dropdown list day & month)

Hi,
Appreciate if someone can help me on this. I already create form and in my form there is date selector to select day,month and year. But how to use insert record funtion to get the date as below.
thanks.
<form id="form1" name="form1" method="post" action="">
<table width="60%" border="0" align="center" cellpadding="3" cellspacing="3">
    <tr>
      <td width="85">Date</td>
      <td width="4">:</td>
      <td width="381"><input name="name" type="hidden" id="name" value="<?php echo $user ?>" />
        <input name="department" type="hidden" id="department" value="<?php echo $department ?>" />
        <select name="day" id="day" >
          <option value='01'>01</option>
          <option value='02'>02</option>
          <option value='03'>03</option>
          <option value='04'>04</option>
          <option value='05'>05</option>
          <option value='06'>06</option>
          <option value='07'>07</option>
          <option value='08'>08</option>
          <option value='09'>09</option>
          <option value='10'>10</option>
          <option value='11'>11</option>
          <option value='12'>12</option>
          <option value='13'>13</option>
          <option value='14'>14</option>
          <option value='15'>15</option>
          <option value='16'>16</option>
          <option value='17'>17</option>
          <option value='18'>18</option>
          <option value='19'>19</option>
          <option value='20'>20</option>
          <option value='21'>21</option>
          <option value='22'>22</option>
          <option value='23'>23</option>
          <option value='24'>24</option>
          <option value='25'>25</option>
          <option value='26'>26</option>
          <option value='27'>27</option>
          <option value='28'>28</option>
          <option value='29'>29</option>
          <option value='30'>30</option>
          <option value='31'>31</option>
        </select>
        <select name="month" value=''>
Select Month
          <option value='01'>January</option>
          <option value='02'>February</option>
          <option value='03'>March</option>
          <option value='04'>April</option>
          <option value='05'>May</option>
          <option value='06'>June</option>
          <option value='07'>July</option>
          <option value='08'>August</option>
          <option value='09'>September</option>
          <option value='10'>October</option>
          <option value='11'>November</option>
          <option value='12'>December</option>
        </select>
        <input type="text" name="year" size="4" value="2011" />
        <label for="date"></label>
        <input type="hidden" name="date" id="date" /></td>
    </tr>
    <tr>
      <td>Start Time</td>
      <td>:</td>
      <td><select name="start_time" id="start_time" >
        <option value="8:45">8:45 AM</option>
        <option value="9:00">9:00 AM</option>
        <option value="9:30">9:30 AM</option>
        <option value="10:00">10:00 AM</option>
        <option value="10:30">10:30 AM</option>
        <option value="11:00">11:00 AM</option>
        <option value="11:30">11:30 AM</option>
        <option value="12:00">12:00 PM</option>
        <option value="12:30">12:30 PM</option>
        <option value="13:00">1:00 PM</option>
        <option value="13:30">1:30 PM</option>
        <option value="14:00">2:00 PM</option>
        <option value="14:30">2:30 PM</option>
        <option value="15:00">3:00 PM</option>
        <option value="15:30">3:30 PM</option>
        <option value="16:00">4:00 PM</option>
        <option value="16:30">4:30 PM</option>
        <option value="17:00">5:00 PM</option>
        <option value="17:45">5:45 PM</option>
      </select></td>
    </tr>
    <tr>
      <td colspan="3" align="center"><input type="submit" name="button" id="button" value="Submit" /></td>
    </tr>
</table>
</form>

kelah_merah wrote:
... but I have problem on edit the records. How to get the dropdownlist display the current day,month and year
I *knew* you´re going to ask this question
The attached screenshot "screen_update_query" shows how to...
a) utilize some of MySQL´s Date and Time Functions to extract the day, month and year from a datetime column (here named "col_datetime")
b) extract the hh:mm via a DATE_FORMAT pattern
All four information units would be pretty much useless without defining a Column Alias (e.g. AS day)
The second screenshots shows how to tie the values of one of your dynamic lists (e.g. the list of days) to the respective Column Alias by using the "select value equal to" feature.
That´s it !

How to get rid of Reading List and why my add page going in there?

My + on the toolbar is now adding pages to the reading list instead of the bookmark.. How do i change that/get rid off reading list? I want stuff to go to bookmark. I tried to change the setting in in Safari>Preferences>Bookmark but I dont have a bookmark option.. Very annoying. I updated to 10.9.1 version. Help!

Click and hold the button to add a bookmark.

How to get current logged-in user name in data access driver or in universe

In universe, to get the current log in user is via @Variable('BOUSER').
Right now, I need to be able to get the user name in the data access driver. I am writing a customized data access driver because we need to patch some where clause on the the query generated by the universe based on the logged-in user info. I only think of using end_sql parameter or adding an universe level filter to patch the @Variable('BOUSER') to the query, which would not work if user want to use customized query.
Can anyone tell me how to get currentBO user name from connection server ? or how @Variable('BOUSER') is translated into the logged-in user name in the universe?

I do not know your EJB Service. But you should pass the credentials of the current logged on portal user to your service. That's not by default I think.
I had a similar problem with CAF developed webservices. I had to turn on permission checks in my web service and passed the credentials via logon ticket.
Regards, Bernd

How to get the full path or name of the Layer to which Filter is applied?

Hi All,
I have created a layer using some background image as source. How to get the name or ful path of the background image?
I checked the documentation and found GetPathNameProc(SPPlatformFileSpecification*) function, but I couldn't get the parameter SPPlatformFileSpecification*.
Is there any other way to get the file path of background layer in my custom filter?
Thanks,
Dheeraj

If this is a client side application then I'd say look into drag-n-drop tutorials.
i.e. drag file to your application, action listener fires, create File object giving you full name and path of users action.
If this is a web application then look into the "multipart/form-data" content type specifications on how to upload files.
i.e. user specifies file from <input type='file' ... /> type, submits, servlet receives data and recreates file locally on application server side.
If you are thinking that all you need to send a file to a program is the full path and name in a textbox its a little bit more complicated then that.
Good luck, hope that helps!

How to get Duotone Mode Ink List Names?

Similar Messages

Maybe you are looking for