How to get Expanded View of SAP Menu and Favorites Structure Tree ?

Hi All,
Pls refer the image below, which is the initial screen of SAP Easy Access.
I like to expand the highlighted ones in a single shot and want to convert the same into Word / PDF for reference.
Can anyone guide me…
Figure - 1.
Thanks With Regards,
Dinesh Kumar V.

I do not exectly understand what you want to do ...
If you want the entire SAP Menu Structure downloaded for further processing, check out Report SSM_LIST
Regards,
Uli

Similar Messages

How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).

Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
    strtab
USING
    'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*&      Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
                    USING ittab TYPE any.
DATA:
    h_zaehler TYPE i,
    line_str TYPE string,
    l_tabellenname(10) TYPE c,
    l_arbeitsbereichsname(10) TYPE c,
    h_string TYPE string,
    h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                 <l_arbeits> TYPE ANY,
                 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
    CLEAR: h_zaehler, line_str.
    line_str = ittab.
    DO.
      ADD 1 TO h_zaehler.
      ASSIGN COMPONENT h_zaehler OF
        STRUCTURE <l_arbeits> TO <feldzeiger>.
      IF sy-subrc <> 0. EXIT. ENDIF.
      WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
      h_string = h_char.
      CONCATENATE line_str separator h_string INTO line_str.
    ENDDO.
    APPEND line_str TO strtab.
ENDLOOP.
ENDFORM.                    "data_to_string

How to get the last page SAP Script form

How to get the last page SAP Script form.
I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
Regards

Hi
You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
From SAP Help:
This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
/: IF &NEXTPAGE& = '0'
Last page
/: ENDIF
Max

How to get the view Object in UserDefined Action

Hi All,
Any body tell me how to get the view object , like the view object avilable in the wdDoModifyView() method as parameter.
I have requirement like, i want to change the , no of rows displaying in the table should be changed at the runtime based onthe no of rows selected in the dropdown box.
The action which i created will be assigned to that dropdown box, on select of the available option, i will get the view object and change the properties of the "maxrows" of the table .
so for getting the view object in the the Action methods tell me what is the procedure for getting the current view object.

Hello Vishal,
Simply create a value attribute (say rowCount) of type 'integer' and bind it to the 'visibleRowCount' property of your table. Then, in the actionHandler get the value from the UI element (in your case, I guess it is drop down) and set it to the attribute 'rowCount' like this.
wdContext.currentContextElement.setRowCount(
wdContext.current<nodeElement>.set<AttributeBound toDropDown>);
Bala

How to get rid of the SAP BPC "three globes" startup screen?

Hi,
I am trying to figure out how to get rid of the SAP BPC "three globes" startup screen when we start BPC. I do not want it to pop up.
I looked at VBA behind the workbooks but could not find anything. Could not make the sheet invisible.
Is there a way to get rid of the screen? This is the screenshot
www.flickr.com/photos/chalinka/3471310254/
Thanks!

Just found the answer on this very forum!
Re: How to change the logo, (3 Globes) on the launch page
Posted: Mar 18, 2009 12:46 PM in response to: David Fletcher Reply
OK then, now v7sp03 for microsoft has hit the shelves, you can change the logo !!!
It is quite easy.
Have the logo file ready in either BMP, GIF or JPG format.
Put it in your "Server Install -> DataWebFolders[Appset]" folder (so where you keep your files).
In ApplicationSet parameters, add the parameter COMPANY_LOGO and in the options type the name of the file you just put on the server.
Now if you restart BPC for Excel, the second excel page that pops up should be showing your new logo or graphic (mine did).
The use of the logo has been documented in the admin manual -> working with appset parameters
Some tips.
I wanted not to clutter the filesystem so i put my logo in the appsetpublications folder and added the path accordingly in the parameter (so now it reads appsetpublicationslogoname.jpg instead of just logoname.jpg).
If you do not supply a name (only the parameter), your second Excel window (normally holding the graphic) will not appear. That could be an alternative too if you find that whole thing annoying.
Hope this helps you build great BPC apps,
Edwin van Geel

How to get internal table from SAP Data Provider C#

Hello.
ABAP:
   DATA: lt_t001 TYPE TABLE OF t001.
   DATA: url(1000) TYPE c.
SELECT * INTO TABLE lt_t001 FROM t001.
CALL FUNCTION 'DP_CREATE_URL'
    EXPORTING
      type                 = 'APPLICATION'
      subtype           = 'X-R3TABLE'
    TABLES
      data                 = lt_t001
    CHANGING
      url                    = url
    EXCEPTIONS
      OTHERS           = 4.
C#:
using SAPDataProvider;
using SAPTableFactoryCtrl;
public void SetDataFromUrl(string url)
            SAPDataProviderClass p = new SAPDataProviderClass();
            p.SetDataFromURL("APPLICATION", "X-R3TABLE", url);
            ISapDPR3Table tbl = p.GetDataAsR3Table("APPLICATION", "X-R3TABLE");
            SAPTableFactoryClass tf = new SAPTableFactoryClass();
            Table tb = (Table)tf.NewTable();
            tb.ISAPrfcITab = tbl.DataTable; // Exception !!!!!!
How to get internal table from SAP Data Provider ?

Hi Sergey,
I'm trying to do the same, have you found a solution to solved it?
thanks for your help.
Regards.
Jonathan

How to add new folder in sap menu visible to all users

I want to add a new folder in sap menu. i can do it for my user id as it is user specific. I wanna know that how to add a folder so that every user able to see the same i.e irrespective of user-ids.

Hi Ramya,
This can be done in SAP menu instead of User Menu, provided all your users are using SAP menu. If a folder is created in User menu it would be visible only to the user. If it is created in SAP menu and if all the users are using the SAP menu then the folder would be visible to all...
Hope this clarifies your query...
Reward me points...
Regards
Prasanna

How do you get timeline view on imovie 08 and speed up a clip on imovie 08

how do you get timeline view on imovie 08 and speed up a clip on imovie 08

Hi
You can not - Nobody else (if not a very selected few at Apple dev.group)
TimeLine was lost in iMovie'08 and 09 and a very simple one re-introduced in iMovie'11
Speed Change - Was omitted in iMovie'08 - and returned in iMovie'09 - BUT has to be used in a certain way - the glider/slide if used - will destroy the audio (a Known BUG - in both iM'09 and iM'11) but use of pre-set fixed no. 25% 50% 100% 200% etc. will work.
Yours - still using iMovie HD6 - and LOVE it - Bengt W

Can anyone tell me how to get rid of the side menu in Safari ios8? Thatnk you.

Can anyone tell me how to get rid of the side menu in Safari ios8?

Click at the top of the browser where it looks like an open book that should do it.

How to get the data of Open Opportunities and Closed Opportunities

Hi Guys,
i'm studying about Sales Opportunities in SAP BusinessOne.
i'm able to get the data about Sales Opportunities(i enterd), Opportunities Report and Lost Opportunities.
But i dont know how to get information about Open Opportunities Reports and Closed Opportunitiesn Reports.i'm unable to find even their names of tables.
plz send a reply.................
   with regards,
santh

Thanq Alexey for ur Helpful Answer,
   i'm aware about execution of a query in the Query Analyzer of SQL Server.but i dont know how to move to ShowDebugInformation Menu.
   can i find it in the SAP Business One Tool. or do i need
to check any data base help given by B1(Ex:- REFDB2004).
    plz give answer for this also............
with regards,
santh

How to hide display details in sap gui and create ad-hoc request in UWL?

Hi,
how to hide display "details in sap gui" and "create ad-hoc request" in UWL?
Please telme the step-by-step procedure to hide "details in sap gui" and "create ad-hoc request".
Thanks,
Rashmi

Hi,
Thanks for the information. It was very helpfull.
Can you please tellme where can we fine UWL iView? I tried to find this out in two ways.
1) Portal Content -> Content Provided by SAP -> End User Content -> Standard Portal Users -> Views -> com.sap.coll.iviews -> Universal Worklist (finally i got this iView). Here i dint find any property called "List of UWL Actions to exclude". In the link which you had given, its written that we can modify the iView and add the name of the actions under the Actions to exclude from the UWL property.
Which iView do we need to modify and where can i find that property?
2) I downloaded the xml file and then tried to find this property "List of UWL Actions to exclude" or " Actions to exclude from the UW". But i couldnt find both the properties in xml file.
Thanks,
Rashmi

Table for SAP Menu and Favourites

hi
when we logon to SAP in the left hand side pane there is SAP Menu and our Favorite Transactions that we have added can somebody tell me where these are stored, what is the table name.... i have some requirement of finding this out user wise.
i hope u guys understand...
abhishek suppal

Abhishek,
Try table SMEN_BUFFC to get your Favourites.
Hope this helps.
Pat.
PS. Kindly award Reward Points accordingly.

How to get the values of all elements and sub elements from following xml

how to get the values of all elements and sub elements from following xml...
<?xml version="1.0" encoding="UTF-8" ?>
<List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
<TransactionID>TransactionID</TransactionID>
<Match>
<Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
<List_Matched_Field>
<FSFM_Matches>
<NUMBER>NUMBER</NUMBER>
<TERROR>TERROR</TERROR>
<TU>TU</TU>
<NAMEU>NAMEU</NAMEU>
<DESCRIPT>DESCRIPT</DESCRIPT>
<KODCR>KODCR</KODCR>
<KODCN>KODCN</KODCN>
<AMR>AMR</AMR>
<ADDRESS>ADDRESS</ADDRESS>
<SD>SD</SD>
<RG>RG</RG>
<ND>ND</ND>
<VD>VD</VD>
<GR>GR</GR>
<YR>YR</YR>
<MR>MR</MR>
<CB_DATE>CB_DATE</CB_DATE>
<CE_DATE>CE_DATE</CE_DATE>
<DIRECTOR>DIRECTOR</DIRECTOR>
<FOUNDER>FOUNDER</FOUNDER>
<TERRTYPE>TERRTYPE</TERRTYPE>
</FSFM_Matches>
<OfacMatchDetails>
<UID>UID</UID>
<TITLE>TITLE</TITLE>
<SDNTYPE>SDNTYPE</SDNTYPE>
<REMARKS>REMARKS</REMARKS>
<ID_UID>ID_UID</ID_UID>
<IDTYPE>IDTYPE</IDTYPE>
<IDNUMBER>IDNUMBER</IDNUMBER>
<IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
<ISSUEDATE>ISSUEDATE</ISSUEDATE>
<EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
<ADDRESS1>ADDRESS1</ADDRESS1>
<ADDRESS2>ADDRESS2</ADDRESS2>
<ADDRESS3>ADDRESS3</ADDRESS3>
<CITY>CITY</CITY>
<STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
<POSTALCODE>POSTALCODE</POSTALCODE>
<COUNTRY>COUNTRY</COUNTRY>
</OfacMatchDetails>
</List_Matched_Field>
</Match>
</List_AML_Finacle>

avoid multi post
http://forum.java.sun.com/thread.jspa?threadID=5249519

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

I have a new MacAir and don't know how to get info from my USB stick and my SD photo card. Can anyone help me please?

I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?

Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt

How to get Expanded View of SAP Menu and Favorites Structure Tree ?

Similar Messages

Maybe you are looking for