How to get full image from adress book contact

I'm trying to get the full image out of an address book contact. All my basic code is working. The problem that I am having is that for all contacts with images the returned image size is 320x320.
Playing around I have edited contacts, through Contacts.app, by setting a full 320x480 image. I set such an image on my own contact and called my iPhone from a different number. Sure enough when the phone rings the phone displays the full screen original image as I picked it.
So the contact seem to have the full 320x480 image associated with it. But, when I use the ABAddressBook functions to get this same image from the contact, the returned image data says the image is 320x320. And if I display this image data into a view it appears as a square with the top and bottom 80 pixels chopped off.
Has anyone else run into this? Any ideas?

Hey Rick,
I am also working on the same feature. I was also able to retrieve everything fromt eh addressboook. But I have not worked for image as I am not able to design the same GUI for Add New Record, or Info page as present in iPhone. I am facing a problem of adding UIImageView in the design of grouped table cell. and Give the big gap between the UIImage and Table cell where First,Lat Name and Occupation is being present.
Plz help in design view.
Thanx
Message was edited by: a1technology

Similar Messages

  • Can I get tel number from adress book(contacts)

    hi all
    is there any api for get the phone number or name from phone memory
    thanks
    muratti32

    hi
    You can find the sample code and the discussion in the Forum it self.Search for that
    lakshman

  • How to get all images from folder in c#?

    I am trying to get all images from folder. But it is not executing from following:
     string path=@"C:\wamp\www\fileupload\user_data";
                string[] filePaths = Directory.GetFiles(path,".jpg");
                for (int i = 0; i < filePaths.Length; i++)
                    dataGridImage.Controls.Add(filePaths[i]);
    Please give me the correct solution.

    How to display all images from folder in picturebox in c#?
    private void Form1_Load(object sender, EventArgs e)
    string[] files = Directory.GetFiles(Form1.programdir + "\\card_images", "*", SearchOption.TopDirectoryOnly);
    foreach (var filename in files)
    Bitmap bmp = null;
    try
    bmp = new Bitmap(filename);
    catch (Exception e)
    // remove this if you don't want to see the exception message
    MessageBox.Show(e.Message);
    continue;
    var card = new PictureBox();
    card.BackgroundImage = bmp;
    card.Padding = new Padding(0);
    card.BackgroundImageLayout = ImageLayout.Stretch;
    card.MouseDown += new MouseEventHandler(card_click);
    card.Size = new Size((int)(this.ClientSize.Width / 2) - 15, images.Height);
    images.Controls.Add(card);
    Free .NET Barcode Generator & Scanner supporting over 40 kinds of 1D & 2D symbologies.

  • Hi I have opened my trial of photoshop,but cant figure out how to get an image from my pictures in t

    I have opened my trial of photoshop,but cant figure out how to get an image in.

    Hi,
    The first video on https://helpx.adobe.com/creative-cloud/learn/start/photoshop.html shows you one way to do this: If you open Photoshop, just drag the image file from Explorer/Finder into the PS workspace (or even just to the PS icon).
    Another way is to open Photoshop, select File > Open from the menu, and navigate to your image.
    Hope this helps,
    Randy Nielsen
    Learning Content Manager, Creative Cloud Learn
    Adobe

  • How to get full SQL from an SQL HASH_VALUE

    Dear All,
    I am having Oracle 9.2.0.8 RAC on AIX . I am monitoring long running queries through gv$session_longops and also i use Stats Pack report to find the top CPU/ DB time consuming SQL in hourly basis .
    What is the best way to
    1 get full sql from top SQL HASH VALUE, which is from SP report.
    2.get full SQL of a currently running SQL.
    i use some views for the same but not always i get full SQL.
    Many Thanks in Advance
    Regards
    Edited by: user7699943 on Oct 10, 2011 1:49 PM

    user7699943 wrote:
    Dear All,
    I am having Oracle 9.2.0.8 RAC on AIX . I am monitoring long running queries through gv$session_longops and also i use Stats Pack report to find the top CPU/ DB time consuming SQL in hourly basis .
    What is the best way to
    1 get full sql from top SQL HASH VALUE, which is from SP report.
    2.get full SQL of a currently running SQL.
    i use some views for the same but not always i get full SQL.
    Many Thanks in Advance
    Regards
    Edited by: user7699943 on Oct 10, 2011 1:49 PMhave you tried:
    select sql_Text from v$sql where hash_value = &sql_hash_value

  • How to get pages document from mac book to iphone 5 to send in a email

    How can I transfer pages document from mac book pro to iphone 5. I want to email documnets from phone.

    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
    To delete the pics from your MBP, just drag to Trash and empty Trash.
     Cheers, Tom

  • How to get the image from web site

    Hi,
    Anybody know the coding that use to get or download the image from the web site when the image's url is given.
    Thanks

    http://www.exampledepot.com/egs/java.net/GetImage.html

  • How to get full row from F4 pop up window into selection-screen fields

    HI ,
    I had a selection screen having 3 fields (vbeln, posnr, ebeln )
    If i press F4 on field 1 i will get a pop up having all values.
    If i click on any one row in that popup, only the first field is getting filled with the value. But i want all the other fields to be filled with the corresponding values in the screen simultaneously.
    Please let me know is there any solution for this...
    Regards,
    Kanth....

    Hi
    U should base your selection-screen on a dictionary structure whith those three fields where you assign your search help exporting all values (VBELN, POSNR and EBELN).
    In this way you'll obtain what you need automatically
    Else you can manage it in POV event by your selef.
    Max

  • How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

    How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

    If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
    Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

  • I am downloading from a Canon 650D to Photoshop CS5.1 AND Adobe Bridge CS5.1  do i need to download a  DNG convertor? if so how do i get the images from the camera to the convertor?

    I am downloading from a Canon 650d  TO Photoshop CS5.1  and Adobe Bridge CS5.1  Do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

    Please check the list yourself and co,mare the necessary CR version with the one your version of Photoshop utilizes. 
    If the version os higher than yours you can use the free DNG Converter – as to how to use it please read up on that.
    Camera Raw plug-in | Supported cameras

  • How do I get full images of caller to appear on 5s using 7.1?

    Apparently it's no longer possible to see the full image/picture of the caller on the phone after the upgrade to 7.1. I believe this is a safety hazard while driving because you can't easily identify the caller. Is it possible to get full images of the caller with this latest version?

    SGfeedback wrote:
    Apparently it's no longer possible to see the full image/picture of the caller on the phone after the upgrade to 7.1. I believe this is a safety hazard while driving because you can't easily identify the caller. Is it possible to get full images of the caller with this latest version?
    I believe that you using your iPhone and looking at your screen while driving is a far more dangerous safety hazard than a small picture you should not be diverting your attention from the road/driving while trying to look at.
    My hands free device announces who is calling.

  • How do I remove images from Notes app?

    How do I remove images from Notes app?
    I sometimes find that, when cutting and pasting text from the web, an image is also copied (pretty much at all times I try and avoid this, but sometimes the selection process doesn't allow for fine enough control - e.g. a whole block of content may be selected, rather than just the few words I'm trying to copy).
    I then find, once it's part of my note, that I cannot select the unwanted image and remove it. Can anyone tell me if this is something that can be done, and if so... how?
    Thanks, Sebastain

    Hi Drew & Kilgore*
    Thanks for your replies. I also have and use Simplenote, although I went off it for a while, when it started crashing all the time on me. It seems to be more stable again now, so I'll start using it more regularly again, perhaps.
    I am, obviously, disappointed that one can't simply select ANY object within a Notes document and choose to delete it. As I rather suspected, the only solution is an annoying workaround. Apple stuff seems to get more like this as time goes by. At least in my experience.
    I solved the issue my own way in the end, but I guess it was close to your 1st idea DR, and your 2nd option, KT: I basically cut and pasted everything above, and then everything below, the image, and pasted both chunks of text into a new note. So it took two passes, and left me with the original note just displaying the image, which I then trashed.
    Tapping to the right of the image followed by deletion was what I hoped & expected would work. But instead the image stayed put and the text below the cursor would simply slide along the right hand side, moving upwards as I deleted! Most bizarre, to my mind at least.
    Anyway thanks for the feedback. But, for anyone else that might want to know how to do this, the answer is: NO, you can't select and delete an image once it's in one of your notes!
    * I quite recently watched the rather strange Bruce Willis / Nick Nolte 'Breakfast of Champions' movie... I think I still prefer the book to the film!

  • How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).

    Hi,
    My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
    Here is my question:
    How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
    Please help on this, also send me any documentation about this if you have.
    Thanks,
    Pavan.

    Hello,
    here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
    Regards
    Walter Habich
    REPORT habitest2 LINE-SIZE 255.
    TYPES:
      strtab_t TYPE TABLE OF string.
    CONSTANTS:
      separator VALUE ';'.
    DATA:
      it_s012 LIKE s012 OCCURS 0,
      wa_s012 LIKE s012,
      strtab TYPE strtab_t,
      strele TYPE string.
    SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
    PERFORM data_to_string
      TABLES
        strtab
      USING
        'S012'. "requires it_s012 and wa_s012
    LOOP AT strtab INTO strele.
      WRITE: / strele.
    ENDLOOP.
    *&      Form  data_to_string
    FORM data_to_string TABLES strtab TYPE strtab_t
                        USING  ittab TYPE any.
      DATA:
        h_zaehler TYPE i,
        line_str TYPE string,
        l_tabellenname(10) TYPE c,
        l_arbeitsbereichsname(10) TYPE c,
        h_string TYPE string,
        h_char(255) TYPE c.
      FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                     <l_arbeits> TYPE ANY,
                     <feldzeiger> TYPE ANY.
      CLEAR strtab.
      CONCATENATE 'IT_' ittab INTO l_tabellenname.
      ASSIGN (l_tabellenname) TO <l_tabelle>.
      CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
      ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
      LOOP AT <l_tabelle> INTO <l_arbeits>.
        CLEAR: h_zaehler, line_str.
        line_str = ittab.
        DO.
          ADD 1 TO h_zaehler.
          ASSIGN COMPONENT h_zaehler OF
            STRUCTURE <l_arbeits> TO <feldzeiger>.
          IF sy-subrc <> 0. EXIT. ENDIF.
          WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
          h_string = h_char.
          CONCATENATE line_str separator h_string INTO line_str.
        ENDDO.
        APPEND line_str TO strtab.
      ENDLOOP.
    ENDFORM.                    "data_to_string

  • How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    Hi Keith, and all others chiming in, I do have the correct option checked in advanced settings telling iPhoto to copy the images into the library. What is a refernced library? Perhaps this is where I am getting confused. I exported my entire photo library from an old iMac5 to my external hard drive, from there I attempted to import the entire library to my new iMac. Am I overlooking an obvious and easy way to import from the hard drive to the new iMac--I dragged the entire photo pholder from the hard drive to the open window of iPhoto on the new computer. Now, I only get preview file sizes in iPhoto, unless I have my external drive open. Perhaps I need to import the original images from the hard drive in a different way...?! (This is making me feel pretty stupid.)

  • How to get my images always order by file name, and not by time of captur, in all the folders in the library?

    How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
    Sorry for the poor english, but im portugues.
    In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
    It ´s possible?
    And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in  the other direction?

    The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
    The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
    If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

Maybe you are looking for