How to get HD Out of a low file size.

I wanna make HD for youtube with premiere cs3. I successfully uploaded a working file with a "watch in HD" button, but the 30 second file was 1.5 GB! What is the best render setting (Compressor, Format, File type,etc) for good hd but a reasonable file size.

FAQ:What are the best settings for YouTube?
Cheers
Eddie
PremiereProPedia   (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

  • How to Get In & Out of Match, Get your Downloads and Run

    How to Get In & Out of Match, Get your Downloads and Run 
    So you have read the marketing hype, and are thinking what you really want is to pay for the service to upgrade your low quality bitrate files to a bit better 256KBPS rate easily, as don’t fancy rebuying/ reimporting or other method
    This guide should show you the fastest route to achieve you upgrades
    It assumes you’re working from your main music library, and know something about IT, and have <25k of music files
    Backup your music files
    If you know how to do this, its simple right – so once done then move to step 2, if not read below so you don’t blame me for a loss
    Transfer Hardware
    your choice the transfer hardware, suggest offline harddrive via USB3.0 (blue USB connector/eSata/ 1494b/1GB NIC/etcetera but your call
    If you use USB2.0/ 100MB NIC/1394a or other lower transfer method, accept the time hit
    Don’t use Time Backup/local disk backup software unless you have RAID 5 setup or better (and if wondering what that is, you almost certainly don’t then)
    Don’t use  internet backup service unless you live next door to the hosting company, with stunning internet connection to envy 99.9% of the human race, remember this is the fast method folks)
    Transfer Software
    I am assuming you know how to do a copy n paste/ robocoby/xcopy/drag n drop or whatever method turns you on via finder/explorer/cmd window ect
    Caveat #01: If not sure how to do above, then stop now as you are not IT literate ready for this
    Find your music files and back them up
    Now keep the computer running, preferably with nothing else running from this point for ease of use bar an active internet connection, and power saving switched off
    If you know where the files are great, backup the files, but some don’t so for them as below
    Caveat #02: if you don’t know how to find them your most likely on default settings, or sitting with a legacy from a past upgraded machine - below should help but you might want to stop now if you have never been curious about the location before
    Within iTunes , go to [Edit/Preferences/Advanced] and note down the location shown for Itunes Media Location
    In the same location of preferences, hit [Keep iTunes Media Folder organised] and let the application do its stuff.  You will end up with the location in 1ciii a ready to copy location which for simplicity of topic, copy the whole folder and its subfolders.  You may end up with some extra copies of music files (an iTunes safety mechanism, but it won’t show in the folder location, and we can ignore later on)
    Enable Match (after paying for the service)
    Run Match
    Accept that the Apple iTunes process is not perfect, may crash/stop/pause and reboots will be needed, and we can move on so to speak. Key here is you cannot do an unattended script or assume no end user interaction needed L
    Turn on iTunes Match, notice the new ITunes Match on the left hand sidebar, click it, then hit the Start button – if it works and you eventually get to STEP 3 perfect.
    If it fails before getting to STEP 3, reboot and restart
    If this still fails to get to STEP 3, then create a new iTunes database (browse forums on how to do), read your media files from the location in 1civ
    Stop MATCH  (the upload process only, not the service)
    Once STEP 3 starts, CLICK STOP - ASAP, as all this does it upload data, and you don’t want to do this, just get your upgraded files (remember the title of this entry your reading!)
    This also avoids future issues with Album art lost
    Delete Matched low bitrate files
    Create a NEW SMART playlist, with two criteria
    Show all files with bitrate is less then 256
    Show all files where iCloud status is MATCHED
    In the new playlist, click it and it shows the files we want to blow away. 
    Click Edit / Select All then
    Click ctrl in windows/apple  (cmd) logo in mac, and press delete button, ensuring you do NOT tick the delete from iCloud Option.  Now want a few mins for it do do its stuff.
    Download Upgraded BitRate Files
    In the same location as 5, reselect all, and right click, and select the option to download all, and off it goes
    On the lefthand sidebar in iTunes, click Downloads, and you will then see in the middle bottom screen an option for simultaneous downloads (select it)
    Your done Just let the app now do its stuff. I would ignore the message saying you can get on with other things, and use anther machine, preferably not using the same internet connection.
    Optional Steps:
    Click randomly from the Itunes/Matched/256KBPS listed files, and play them.  Not all the files, one every 30 or so, and just the start, then last few seconds to check not dead or corrupt files.
    Update your Step 1 backup with the new files, which is going to take up more space, guess at 40%.
    Kill your iTunes Match account (both the recurring automatic subscription, and  the account if not continuing to use the store part of iTunes)

    bump

  • How to get graininess out of black areas?

    How to get grainiesss out of black or dark areas?

    you can't.
    a) too low light recording results in 'noise' due to in-camera amplification
    b) noise is handled by the compressors as 'content'; which results in blocky artefacts.
    for FCPX are plugins avail, as the famous Natress DeNoiser, which smoothen such pictures (very well). a $$$ solution.-
    next time more light …

  • HT203433 I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    Welcome to the Apple Community.
    The following article(s) may help you.
    Moving your iTunes library to a new computer

  • My 4gb SDHC flash mem card is stuck in DVD slot on my iMac 27". How to get it out?

    I misplaced my 4GB flash memory card (Canon camera) in the DVD slot (above the card slot) and it disappeared while I was trying to get it out. Naturally I inadvertently (spelled "stupidly") knocked it inside and could not figure out how to get it out. The dust rubber "shields" hide it and I've tried to find it with a toothpick and wedge it out, to no avail. Are there any ideas or suggestions others may have used to get it out (I know turning it on it side and shaking won't work). Why in the world did they design it like it is -- I've had it happen to me and others have also told me of their misadventures, but they also were able to gradually get it out. This time, it's in too deep. Can I ignore it and still use the CD/DVD slot without it blowing up?

    You might need to take to an Apple technician or apple dealer to let them take apart the iMac and remove the flash memory card. if you're very careful you might try a pair of needle nose pliers and a flashlight but it's easy to do damage to the DVD internal mechanical if you're not real careful.
    A good story to tell your grand kids maybe ;-)
    Good luck

  • How to get data out of XML?

    Hi,All.
    I am running SAX (JAXP1.01) in Applet to process XML file. My question is how to get data out of xml format according to the field name (@age,@rank etc)
    and write into string buffer seperated by comma.
    Should I use SAX or DOM? (file size is big)
    My xml as follow :
    <ROOT>
    <FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@team/relay}">
         <ObjectName>Field124</ObjectName>
         <FormattedValue>HUNTER</FormattedValue>
         <Value>HUNTER</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@age}">
         <ObjectName>Field125</ObjectName>
         <FormattedValue> 19</FormattedValue>
         <Value> 19</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@Rank}">
         <ObjectName>Field126</ObjectName>
         <FormattedValue>43</FormattedValue>
         <Value>43</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{results.athrel_name}">
         <ObjectName>Field127</ObjectName>
         <FormattedValue>1-1 NORRIE</FormattedValue>
         <Value>1-1 NORRIE</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2}">
         <ObjectName>Field128</ObjectName>
         <FormattedValue>1:54.75</FormattedValue>
         <Value>1:54.75</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1course}">
         <ObjectName>Field129</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1std}">
         <ObjectName>Field130</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2course}">
         <ObjectName>Field131</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2std}">
         <ObjectName>Field132</ObjectName>
         <FormattedValue>QT</FormattedValue>
         <Value>QT</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@points(left)}">
         <ObjectName>Field133</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@pointsdecimal}">
         <ObjectName>Field134</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:decimal" FieldName="{@points(right)}">
         <ObjectName>Field135</ObjectName>
         <FormattedValue>0</FormattedValue>
         <Value>0.00</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1}">
         <ObjectName>Field136</ObjectName>
         <FormattedValue>1:55.98</FormattedValue>
         <Value>1:55.98</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@Rank}">
         <ObjectName>Field137</ObjectName>
         <FormattedValue>43</FormattedValue>
         <Value>43</Value>
    </FormattedReportObject>
    Repeat...
    </FormattedReportObject>
    </ROOT>
    ------------------------------------------------

    For big files use SAX: quicker and less memory usage.
    The xerces parser from Apache has some examples. Basically what you do is scan the XML, remembering what tag you are and once you find the right tag, read the contents.

  • The headphone connector broke off inside my Ipod, any suggestions on how to get it out?

    The headphone connector broke off inside my Ipod, any suggestions on how to get it out?

    See this previous discussion:
    Broken headphone jack! 3.5mm dillemma....: Apple Support Communities

  • How can I print out a complete pdf file of PSE 10 user guide?

    This is worse than trying to deal with the government bureaucrats....I am simply asking how I can print out a complete pdf file of the user guide for PSE 10...I had one for version 9 but cannot get anything for version 10??? The address shown in the getting started manual doe snot go through??? HELP!!!

    Download from here:
    http://help.adobe.com/en_US/elementsorganizer/using/elementsorganizer_10_help.pdf
    for the Organizer
    and this faq:
    http://forums.adobe.com/thread/992825?tstart=0

  • In Mac how to get the Full name of a file Programmatically?

    Hi Friends,
             I am doing one Mac application for displaying the contents of a file. I can able to get some information about the file by using this code below...
      NSDictionary *dict=[fileManager attributesOfItemAtPath:myPath error:nil];
    Now I want to get the some other informations also like Full Name, copyRight, version... So Please suggest me how to get the full name of a file Programmaticallly?

    Your question doesn't make sense.
    First off, if you are going to get the attributes of a file, you need its full name before you can do anything. So that's part one taken care of.
    This function returns a dictionary full of typical file information (type, size, mod dates, etc.) as well as some HFS data (creator code, type code) which, I strongly suspect, are not "pulled out of the file" but rather generated on the spot. (See NSFileManager for the full list of attribute keys.)
    The other items you hoped of retrieving are not part of the regular file system. Sure, a Truetype font has a copyright string and a version, but what about an HTML file? A PNG? A text file you just created?
    There simply are no standard functions to retrieve copyright and version.

  • How to get the owner name for the file in ftp using abap ?

    Hi folks ,
    How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
    but doest work out me . Helping in this regard highly appreciated ...
    Thanks and regards,
    Swarupa Vanarchi

    Hi
    dont you  have used the os user while calling the FTP_CONNECT FM?
    Hope you are not talking about the user executing the FTP program.
    Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
    May be i am going too far with if and elses here as your question possesses no  clarity.
    Plz elaborate your requirement  before anybody can help.
    Regards
    sateesh

  • I pressed  some keys in iPhoto and the picture "icons" shrunk. How to get them back to their original larger size?

    I pressed  some keys in iPhoto and the picture "icons" shrunk. How to get them back to their original larger size?
    I read another post about this that suggested restoring preferences, but I don't know how to do this. I don't want to re-install iPhoto for sure.

    My bad. I didn't see the slider lower right (it was mentioned in the reply).
    Now can somebody tell me how to delete questions

  • How to get the content in embed swf file in Swf Loader on run time

    How to get the content in embed swf file in Swf Loader on run time
    [Bindable]
    [Embed(source="assets/index.swf")]
       private var SWFSRC:Class;
    <mx:SWFLoader id="_swfloader" source="{SWFSRC}" />

    Hi Flex harUI,
    Throw the error.
    Access of undefined property content

  • How to get summary columns in delimited text file

    How to get summary columns in delimited text file
    I am trying to generate a delimited text file output with delimited_hdr = no.The report is a Group above report with summary columns at the bottom.In the text file the headers are not getting repeated & thats ok.The problem is the summary data is getting repeated for each row of data.Is there a way where i will get all the data & summary data will get displayed only once.I have to import the delimited text file in excel spreadsheet.

    Sorry there were a typos :
    When I used desformat=DELIMITEDDATA with desttype=FILE, I get error "unknown printer driver DELIMITEDDATA". When you look for help, DELIMITED is not even listed as one of the values for DESTFORMAT. But if you scroll down and look for DELIMITER it says , this works only in conjuction with DESTFORMAT=DELIMITED !!!!!!??!! This is in 9i.
    Has this thing worked for anybody ? Can anyone please tell if they were able to suppress the sumary columns or the parent columns of a master-detail data for that matter ?

  • Need how to get the data from the external file in eCatt

    Hi ,
      Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
    Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
    But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
    Appreciate response on this

    Hi
    See the links they may be useful
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    Reward points for useful Answers
    Regards
    Anji

  • How to get the absolute path of a file from the local disk given the file n

    how to get the absolute path of a file from the local disk given the file name

    // will look for the file at the current working directory
    // this is wherever you start the Java application (cound be C: and your
    // application is located in C:/myapp, but the working dir is C:/
    File file = new File("README.txt"); 
    if (file != null && file.exists())
        String absolutePath = file.getAbsolutePath();

Maybe you are looking for