How to get Illustrator 10 to run on windows 7 ultimate and not in XP mode?

I have been running Illustrator 10 on windows 7 pro with no problems. I upgraded to a new computer with windows 7 Ultimate and Illustrator will only run in XP mode. It will not open my existing files stating that they were created in a newer version.
How can Illustrator be run in windows 7 Ultimate?

Actually, if you go to the program .exe file (usually in Program files(x86)\Adobe\Illustrator 10\Support Files\Contents\Windows).
Right click on it and select properties.
Select the Compatibility tab.
In the section "Compatibility mode".
Check the box "Run this program ...."
From the dropdown list select Windows 7
In the "Settings" section
Check "Disable visual themes" and "Disable desktop composition"
This will allow Illustrator to run normally in Windows 7 Pro and Ultimate 64bit systems.

Similar Messages

  • How to get i cloud to show phone numbers and not emails

    how to get i cloud to show phone numbers and not emails

    In the contacts app the information is as you have entered it.  You can include the added information you want for the contacts.  Open a contact and tap edit and add the information you want there and then tap done.  It soulds to me like Facebook friends who have email addresses only have been merged into your contacts

  • How to get 'clover.cmd' running as Windows service?

    Right now I have the InDesign instances all running great as services so on a server reboot they start up fine. The clover/lbq part is  just the .cmd script and it's not running as a service. I looked in the documentation but haven't found any info on getting clover to run as a Windows service.
    Anyone know how to set it to do this? I'm on InDesign CS6 (server).
    thanks.

    This information is in the Install Guide that comes with EAS.Running EAS as a Windows service is an option you can select when you install it. If you did not do that, you can set it up to run as service by doing the following: (From the EAS Install Guide)----------------------------------------Adding Administration Server as a Windows ServiceYou can add Administration Server as a Windows service, even if it was not installed as a Windows service.?To add Administration Server to the list of Windows services:1. From a command prompt, navigate to the following directory: EASPATH\eas\server\bin2. Run the following command: install_service.batAdministration Services installs the Windows service as Hyperion-Essbase_Administration_Server Windows service. A message displayed in the command prompt window indicates that the service is installed.3. Start the Hyperion-Essbase_Administration_Server Windows service. See ?Starting the Administration Server Windows Service? on page 49.The Hyperion-Essbase_Administration_Server Windows service is set to start automatically each time you reboot.

  • Need step by step instructions on how to get Lightroom to run in Windows

    First I downloaded Lightroom successfully using newest version of Creative Cloud. It would not run. Literally, nothing happens.
    Then I found some info online that says when Lightroom CC doesn't run, you must uninstall it and download it from the Adobe website instead of using Creative Cloud.
    When I try to download it in either Firefox or Chrome, I get this error message "Firefox/Chrome doesn't know how to open this address, because one of the following protocols (aam) isn't associated with any program or is not allowed in this context."
    After a lot of searching around, I discovered that I needed to download the Adobe Application Manger. I did so but it calls itself the Adobe Update Management Tool. Very confusing.
    Then I went back to the Adobe website and tried to download Lightroom again and got the same error message.
    Next, I ran the Adobe Update Management Tool and clicked on Get and Install Online Updates which seemed to be the only relevant choice. In the dropdown box under Select Product Type, there are many Adobe programs listed but Lightroom isn't one of them. I gave up on trying to download Lightroom directly from the Adobe website.
    I then re-downloaded Lightroom successfully using Creative Cloud. It still would not run.
    Next I found some info online that says you have to go into Appdata > Adobe > Local and rename the OOBE file to OOBE.old, so I did that. Lightroom still would not run. I rebooted. This time when I tried to run Lightroom, I got the screen where you have to accept Adobe's terms and conditions. I did so. Lightroom but still would not run.
    Is there anyone who has been through this and knows exactly what steps in what order I need to take to get Lightroom to run? I have Photoshop CC and it runs without any problems.

    You might reboot and try the other Solution #1/2 items, again.  Since you did so much hacking which may not have been related to the issue, there may be something else not right because of it. 
    You also might try uninstalling and reinstalling LR 5.5 from the cloud, again, or installing the LR 5.5 standalone update from the Adobe updates page:  http://www.adobe.com/downloads/updates/
    You also might try uninstalling your all Adobe software, running the CS Cleaner and installing, again:
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    You haven't said what other Adobe software you're running.
    Is this the very first time you've tried to run LR on this computer or have you upgraded from previous versions that worked ok?

  • How to get the current running activity , suspend it and then restart it?

    hi everybody,
    i'm new in the Bpel world so please try to help me ...
    So my question is how, while a bpel process is running, can i get the activity currently running...and if there is a problem while the execution i can get where exactly did the process stopped and i could restart it?
    i know these are lot of questions but any thing could help....
    thanks in advance

    i already tried JAVA BPEL PM API i wrote the code but i didn't test it yet...
    since i don't know yet how to write a hole project running in the oracle server i couldn't konw if my code is running or not???
    Locator locator = new Locator("default","bpel");
    WhereCondition where = WhereConditionHelper.whereActivitiesOpen();
    IActivityHandle[] activityHandles=locator.listActivities(where);     
    System.out.println("state of an activity "+ activityHandles[2].getState()+ " " +activityHandles[2].getLabel());
    but to know which activity was running when a problem occured...i'll give a look to the file you gave me about bpel fault policies....
    but to restart the process with java code from specific activity...i didn't find in the API something to do this..
    so may be you could help in this point???
    thanks in advance

  • How to get firefox to return to previous link and not reload it

    When viewing content from a page in a tab, clicking the back button causes the previous page to reload in stead of just returning to it. That makes it impossible (without opening the info in a new tab) to return to a page and click the next item you want to view because it is no longer there.
    Also, sometimes you get the message that the previous page is not available with a "try again" button.
    I just want the back button to return to the previous page and NOT reload it.
    I'm hoping there's an about:config setting that fixes this.
    Version 32.0.3
    TIA

    In order to change your Firefox Configuration please do the following steps :
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''' to continue to the about:config page.
    browser.cache.check_doc_frequency
    Set how often to check accuracy of cached documents
    * 0 : Once per session
    * 1 : Each time
    * 2 : Never
    * 3 : When appropriate/automatically

  • How to make jar files run using java.exe and not javaw.exe

    Hi ,
    I am developing a project in which there is an GUI which inturn will call a console . I have made it into an jar file now.
    Here comes the problem. When i run the jar files , i don't get a console. While going through this forum, i came to know that jar runs using javaw.exe and this stops it from bring the console up.
    Please suggest me a way of running the jar file through java.exe or any other method by which i can get an new console poping up.
    PS : i cannot start the application itself in a system console , because the Console mode is an added feature and it is not to be displayed every time but only when the user intends to.

    Thanks for the reply pbrockway2. But i think, i was not able to convey my problem properly.
    I am supposed to start my application in a GUI mode ( No console are should be present at this point of time). Within the GUI , i have a option for working in the console ( i.e if console is choosen, then i start giving my output and take inputs from the console. I am trying to do this by just calling the "System.out "and "System.in" methods. )
    Here is the problem. As i have started it through " jar " it would not have a associated console with it.
    PS: i cannot have launching .bat file because that would result in my application having a console displayed at the very start of the application. I want the console to be displayed only when the user wants to start in console mode.
    Please suggest me some ways of doing this. Can i create a console from my java program and then exit it.

  • How to get Google on my internet home page and not at&t

    when I go into the internet on my phone AT&T window comes up instead of Google. How do I get Google to be my home page?
    Any help will be appreciated.
    Thanks

    When in your browser, go to 'settings'.  There should be an option to set the home page, where you can change it to whatever you want.
    Out of curiosity, how did it get AT&T as a home page if you have a Verizon phone?

  • AdobeAcrobatPro: Downloaded pdf's are much smaller than scanned ones. How to get scanned ones to be fewer px and not lose quality?

    I have several accounts which post .pdf's to be downloaded. These are good quality and are small (kb) files.
    I find when I scan paper documents, they have huge pixelation... and as I make them smaller, they lose readability.
    I've tried to scan at 72px-300px. I've tried to save as .jpg which was then added to a .docx. I've tried to simply save as .pdf all from photoshop.
    Is there a way to get the quality of a downloaded .pdf document and it's low pixelation when starting from a paper document which must be scanned?
    I have a Canon CanoScan Lide 100. and I'm using Adobe Photoshop CC 2014 as well as Adobe Acrobat Pro.

    Generally, if you want best quality you don't start with a scan. It's just a HUGE picture.
    But you can try the "text recognition" feature of Acrobat ("OCR"). Be sure to experiment with the settings, they have huge effects on the result.
    For OCR to work you need good quality scans of good quality originals using common fonts in an expected way (e.g. a page from a magazine).

  • How to get contacts in my Mac Book Pro (and not only on iCloud)

    Hello. God Icould for contacts, works well between Mac Book pro (MBP) and Ipad .. but on the MBP I have only the "iCould" contacts and not the "on My Mac" contacts.
    So when I connect my blackberry to grab Mac contacts, none are transfered as the balckberry seems to locate only the contacts on the Mac Book (not the ones on iCloud).
    Thanks a LOT if you have any tip

    Go to users and groups and choose only your iCloud Contacts to display.
    Ensure that nothing is typed in the search field.
    Click to select the first contact and shift-click the last to select them all.
    Drag the list of contacts to your desktop.
    Make sure your On My Mac account is your default account (preferences > general).
    Select All On My Mac contacts from users and groups.
    Drag the file you previously dragged to your desktop back onto Address Book.
    You might want to back up all your contacts before you begin.
    Select All contacts in users and groups
    Click to select the first contact and shift-click the last to select them all.
    Drag the list of contacts to your desktop.

  • Why won't Illustrator 10 run in Windows 7?

    I thought that Windows 7 will run all programs that run under Windows XP, but I'm having a problem with Illustrator 10. I installed Illustrator 10 under Windows 7, and when I launch it, the logo appears in the center of the screen as it should, but the program suddenly quits launching before the Illustrator window appears. I successfully installed and am running Photoshop 7 and InDesign 2, which I purchased at the same time as Illustrator 10, about 10 years ago. But I'm having a problem with Illustrator 10. Any idea how to get Illustrator 10 to work?

    Not sure about the specs for AI 10.  However you mentioned that Windows 7 runs anything that XP runs.  Well, sort of.  In order for this to
    work you have to be running "Windows XP Mode" within Windows 7 which is basically a Virtual Machine that
    Microsoft developed specifically for Windows 7 that will run a full copy of Windows XP.  You don't have to worry about the license since you own a license of Windows 7.  It is only available in certain editions of Windows 7 and only available for certain types of motherboard hardware (I think the virtual machine settings need to be addressed within the BIOS of your computer and you might have to use hyperthreading, though I do not recall what the specifics are of the BIOS settings--refer to Microsoft's help and support for Windows 7 for the details).
    Hope this helps,
    -markerline

  • How to get Bluetooth Audio gateway in Windows 7 on Mac Mini?

    I just bought the 2012 2.3 GHz Mac Mini
    I have installed windows 7..
    I also installed Broadcom 6.0.2 driver that supports Bluetooth audio gateway , but it keeps saying Bluetooth device not found, where as the Mac mini has an inbuilt 4.0 bluetooth ready!
    How do I get the bluetooth audio gateway to work??
    I use bluetooth headsets of Motorola to answer Skype calls..
    Please help me..
    Thanks

    The GUI version of Disk Utility is very limited in what sort of RAID configurations you can create. It will only allow you to have a single partition on the disk and to make a RAID using that.
    Boot Camp requires creating additional partitions on the disk and hence it complaining.
    There is a commandline version of Disk Utility called diskutility (duh!). It has far more options available. Details for this command can be obtained by typing man diskutility in Terminal.app.
    It appears that in theory you might be able to do the following.
    Start off with both disks not setup for RAID
    Use Boot Camp to create the Windows partition. Repeat this on each disk.
    Then in Terminal.app manually convert the boot Mac partition to a RAID using diskutil appleraid enable
    Then add the matching partition on the second drive to make it a working mirror using diskutil appleraid add
    Then in Terminal.app manually create a RAID for the Windows partition using both drives and use FAT32 as the format using diskutil appleraid create
    Then boot and run the Windows installer and tell it to erase the Windows partition as NTFS
    I cannot gurantee the above will work and you should obviously have backups if needed. Another option would be to have the Mac partition covered by RAID but not the Windows partition, this would result in three volumes one Mac RAIDed volume, and two other non RAIDed volumes even though you have two physical disks.

  • HELP!! How to get the position of active windows in the desktop

    How to get the position of active windows in the desktop

    You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

  • I am not able to access ANSI character ALT 0165 Symbols font (infinity symbol) in Illustrator in CS (Windows 8.1) but I can access it in Illustrator 10 running on Windows XP. Any way to download the complete symbol character set under symbols to Illustrat

    I need to use the infinity symbol in Illustrator but it is not available in Illustrator in CS5 running on Windows 8.1. It is available in Illustrator 10 running on Windows XP. Is there any way to access the INFINITY character under fonts in Illustrator in CS5 (Windows 8.1)?

    Thank you for your suggestion. But I do not know how to access UNICODE. How do I download Unicode fonts?
    Also I have a problem working copying illustrations from Illustrator launched from CS5. The illustration does not copy correctly into FrameMaker 10 with Windows 8.1. However, the illustration copies correctly if I use Illustrator 10 in my computer with Windows XP. How do I solve this?
    When I called Adobe I was just told that they do not support CS5.

  • How to get the values from popup window to mainwindow

    HI all,
       I want to get the details from popup window.
          i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
       now i am able to display popup window with values.How to get the values from popup window now.
       I can anybody explain me clearly.
    Thanks&Regards
    kranthi

    Hi Kranthi,
    Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
    Regards,
    Uday

Maybe you are looking for