How to get iVIEW displayed when logged in a non administrator
Hello friends
I have configured EP in such a way when I login as a user with admin rights, it displays the right iview I want. But it also displays the CONTENT ADMIN, USER ADMIN, and SYSTEM ADMIN tabs also.
I want to create a user which displays the ivew I want but not these admin related tabs.
If I remove the role SAP_J2EE_ADMIN then the iview doesn't show up at all. I even tried just putting SAP_J2EE_GUEST role but didn't work.
Any suggestions?
Thanks in advance
Ram
Thanks a lot Santhosh for the response.
I have created a group that has the right roles defined.
I have created 2 users. One with admin rights and another without admin roles(SAP_J2EE_ADMIN)
When I login as the user with Admin rights I see the iview that i need.
However when i login as the other user with out Admin rights I dont see this iview.
As I said in the beginning both belong to the same group that has right roles defined. Only difference between the two user accounts are that one has SAP_J2EE_ADMIN role added and the other one don't.
So I would like to know why this other user, when logged in doesn't see the iview.
Hope I have explained it clearly. If you have any further questions please let me know.
THanks
Ram
Similar Messages
-
how do I delete.. when logging into my email.. it populates my entire email address.. how do I stop this ?????
Hi Roam.
Message understood.
I managed to delete me and substitute her as Administrator. Thanks.
you ask what machine I am now using, I am a Windows man, currently using XP Pro SP3 and have been for 10 years. A friend from the Education Dept gave me a phased out Mac with OS X in an endeavor to convert me.
At first I was very impressed but as time went on I found that the Mac was not as user friendly as I had thought. The terminology was foreign to me, and where Windows placed thing automatically into place, with Mac I had to physically pick up and re-locate programs.
But what really turned me off was that nearly every thing that I wanted to do I had to go to the net and try and find drivers or whatever to overcome my problems.
A point in question, I purchased an external USB dual layer DVD burner. When connected to XP, it was recognized instantly and within a few minutes I as up and going. With the Mac, it is not even recognized let alone getting it to work!
And then there are all the other little things like printing. In windows every thing from every page I can print, Ctrl + P. With the Mac, I am still trying to find out how to print a page from the Help menu.
Enough said. My daughter is interested and that is all that counts. Let her work it all out, she is smarter (an younger) than me.
Regards -
Not getting planning Applications when Log on Work space
Hi Dear Experts,
when log on Workspace to access Planning:
its show showing
Navigate ->Administration->User management
instead if Select Navigate > Applications > Planning
and iam not getting planning Applications when Log on Work space
I have Just Installed Essbase and Planning into my machine .. and i have opened work space area and
and i tried to create first application by using the following URL
http://localhost:8300/HyperionPlanning/AppWizard.jsp
iam getting not able create first application..
can you please guide me how can i work with planing applications..
thanks in advance
KishoreHi Kishore.
From config utility, did you create an instance before trying to access.
I mean "product instance registration" and "data source configuration"
You can find it in the installation doc
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com -
Xml: how to get node value when pasing node name as a parameter
Hi,
I've got some xml:
var xmlData:XML =
<1stNode>
<buttonID>first child node value</buttonID>
<imageID>second child node value</imageID>
<labelID>third child node value</labelID>
</1stNode>
Then I want to read specific node value based on a value passed to a function. .
var buttonID = new Button;
var imageID = new Image;
var labelID = new Label;
getNodeValue(buttonID); //the value here is set dynamically
private function getNodeValue (nodeName:String):void {
trace (xmlData.nodeName) //doesn't work
var str:String = "xmlData." + nodeName;
var xml:XMLList = str as XMLList //doesn't work
I'm don't know how to get the value when node name is dynamically changed.use:
getNodeValue(buttonID); //the value here is set dynamically
private function getNodeValue (nodeName:String):void {
trace (xmlData[nodeName]) -
I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages
Hello there, Minig1501.
The following Knowledge Base article has some information on the message you're receiving:
Unable to use Apple Push Notification service (APNs)
http://support.apple.com/kb/TS4264
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
How to get the path when i select a directory or a file in a JTree
How to get the path when i select a directory or a file in a JTree
import java.lang.*;
import java.io.*;
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.HeadlessException;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.util.Iterator;
* @author Frederic FOURGEOT
* @version 1.0
public class JTreeFolder extends JPanel {
protected DefaultMutableTreeNode racine;
JTree tree;
protected JScrollPane scrollpane;
final static int MAX_LEVEL = 1; // niveau max de descente "direct" dans l'arborescence
* Sous-classe FSNode
* @author Frederic FOURGEOT
* @version 1.0
private class FSNode extends DefaultMutableTreeNode {
File file; // contient le fichier li� au noeud
* Constructeur non visible
private FSNode() {
super();
* Constructeur par initialisation
* @param userObject Object
FSNode(Object userObject) {
super(userObject);
* Constructeur par initialisation
* @param userObject Object
* @param newFile File
FSNode(Object userObject, File newFile) {
super(userObject);
file = newFile;
* Definit le fichier lie au noeud
* @param newFile File
public void setFile(File newFile) {
file = newFile;
* Renvoi le fichier lie au noeud
* @return File
public File getFile() {
return file;
public JTree getJTree(){
return tree ;
* Constructeur
* @throws HeadlessException
public JTreeFolder() throws HeadlessException {
File[] drive;
tree = new JTree();
// cr�ation du noeud sup�rieur
racine = new DefaultMutableTreeNode("Poste de travail");
// cr�ation d'un noeud pour chaque lecteur
drive = File.listRoots();
for (int i = 0 ; i < drive.length ; i++) {
FSNode node = new FSNode(drive, drive[i]);
addFolder(drive[i], node); // on descend dans l'arborescence du lecteur jusqu'� MAX_LEVEL
racine.add(node);
// Gestion d'evenement sur JTree (on �coute les evenements TreeExpansion)
tree.addTreeExpansionListener(new TreeExpansionListener() {
public void treeExpanded(TreeExpansionEvent e) {
// lorsqu'un noeud est ouvert
// on descend dans l'arborescence du noeud jusqu'� MAX_LEVEL
TreePath path = e.getPath();
FSNode node = (FSNode)path.getLastPathComponent();
addFolder(node);
((DefaultTreeModel)tree.getModel()).reload(node); // on recharche uniquement le noeud
public void treeCollapsed(TreeExpansionEvent e) {
// lorsqu'un noeud est referm�
//RIEN
// alimentation du JTree
DefaultTreeModel model = new DefaultTreeModel(racine);
tree.setModel(model);
setLayout(null);
// ajout du JTree au formulaire
tree.setBounds(0, 0, 240, 290);
scrollpane = new JScrollPane(tree);
add(scrollpane);
scrollpane.setBounds(0, 0, 240, 290);
* Recuperation des sous-elements d'un repertoire
* @param driveOrDir
* @param node
public void addFolder(File driveOrDir, DefaultMutableTreeNode node) {
setCursor(new Cursor(3)); // WAIT_CURSOR est DEPRECATED
addFolder(driveOrDir, node, 0);
setCursor(new Cursor(0)); // DEFAULT_CURSOR est DEPRECATED
* Recuperation des sous-elements d'un repertoire
* (avec niveau pour r�cursivit� et arr�t sur MAX_LEVEL)
* @param driveOrDir File
* @param node DefaultMutableTreeNode
* @param level int
private void addFolder(File driveOrDir, DefaultMutableTreeNode node, int level) {
File[] fileList;
fileList = driveOrDir.listFiles();
if (fileList != null) {
sortFiles(fileList); // on tri les elements
// on ne cherche pas plus loin que le niveau maximal d�finit
if (level > MAX_LEVEL - 1) {return;}
// pour chaque �l�ment
try {
for (int i = 0; i < fileList.length; i++) {
// en fonction du type d'�l�ment
if (fileList[i].isDirectory()) {
// si c'est un r�pertoire on cr�� un nouveau noeud
FSNode dir = new FSNode(fileList[i].getName(), fileList[i]);
node.add(dir);
// on recherche les �l�ments (r�cursivit�)
addFolder(fileList[i], dir, ++level);
if (fileList[i].isFile()) {
// si c'est un fichier on ajoute l'�l�ment au noeud
node.add(new FSNode(fileList[i].getName(), fileList[i]));
catch (NullPointerException e) {
// rien
* Recuperation des sous-elements d'un noeud
* @param node
public void addFolder(FSNode node) {
setCursor(new Cursor(3)); // WAIT_CURSOR est DEPRECATED
for (int i = 0 ; i < node.getChildCount() ; i++) {
addFolder(((FSNode)node.getChildAt(i)).getFile(), (FSNode)node.getChildAt(i));
setCursor(new Cursor(0)); // DEFAULT_CURSOR est DEPRECATED
* Tri une liste de fichier
* @param listFile
public void sortFiles(File[] listFile) {
triRapide(listFile, 0, listFile.length - 1);
* QuickSort : Partition
* @param listFile
* @param deb
* @param fin
* @return
private int partition(File[] listFile, int deb, int fin) {
int compt = deb;
File pivot = listFile[deb];
int i = deb - 1;
int j = fin + 1;
while (true) {
do {
j--;
} while (listFile[j].getName().compareToIgnoreCase(pivot.getName()) > 0);
do {
i++;
} while (listFile[i].getName().compareToIgnoreCase(pivot.getName()) < 0);
if (i < j) {
echanger(listFile, i, j);
} else {
return j;
* Tri rapide : quick sort
* @param listFile
* @param deb
* @param fin
private void triRapide(File[] listFile, int deb, int fin) {
if (deb < fin) {
int positionPivot = partition(listFile, deb, fin);
triRapide(listFile, deb, positionPivot);
triRapide(listFile, positionPivot + 1, fin);
* QuickSort : echanger
* @param listFile
* @param posa
* @param posb
private void echanger(File[] listFile, int posa, int posb) {
File tmpFile = listFile[posa];
listFile[posa] = listFile[posb];
listFile[posb] = tmpFile; -
I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks
You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck. -
How to get a confirmation when your email is delivered or read ?
With Mail app ,How to get a confirmation when your email is delivered or read?
When I send mail with Mail app , there is flying letter pops up. But now I could not see anymore. Do you know how can I active that animation ?
Thanks for your help -
How to get and display current year
hi,
how to get and display current year
and need it to convert numeric format if it is orginally
in character format.Hi,
chk this FM.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
BUKRS = '1000' " Company Code
DATE = SY-DATUM " Date to find fiscal year for
IMPORTING
CURRM = w_currm " Current Fiscal Month
CURRY = w_curry " Current Fiscal Year
PREVM = w_prevm " Previous Fiscal Month
PREVY = w_prevy. " Previous Fiscal Year
rgds
anver
if hlped pls mark points -
How to get my writening history/log more than thre...
How to get my writening history/log more than three months behind
download SkypeLogView
nirsoft.net/utils/skype_log_view.html
and open the main.db file with it
C:\Users\Tamim\AppData\Roaming\Skype\tamim\main.db
can you see the history?
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others. -
How to get the tab when is it pressed?
I have the following situation:
I have an array of JTextField inside a scroollpane. The size of my array is nine or ten depends on some rules. But my window show just four JTextField. So I would like to know how to get the event when I press "tab", just to show the others JTextField while I'm pressing "tab". Because I need this event to scrooll down or scrooll up.
I tried the keylistener, but when I press "tab" any method(keypressed, keyreleased, keytyped) is called.
I also tried the focuslistener. If this event I could scrooll down or scrooll up, but I couldn't do both!!
Can somebody help me??
Thanks anyway!!
GinJTextField implements Scrollable interface, which provides information to the enclosing container such as JScrollPane.
Hence when the tab event is fired, you can compute the Rectangle area that should be visible and then call the 'scrollRectToVisible()' method in JTextField. This will inform the JScrollPane to scroll to the rectangle that you mention.
HTH -
How to get ALV Display with First column alone in sort
How to get ALV Display with First column alone in sort
HI,
You can build Internal Table and send this to the parameter "IT_SORT".
eg:
"the sorting Internal Table structure is as whown below.
DATA: t_sort_info type slis_t_sortinfo_alv.
"Build the Sort Internal Table
t_sort_info-fieldname = 'CARRID'.
t_sort_info-subtot = 'X'.
append t_sort_info.
t_sort_info-fieldname = 'FLDATE'.
t_sort_info-subtot = 'X'.
append t_sort_info.
Then pass this "IT_SORT_INFO" table to the Function module "Reuse_alv_*". (Note send the body of the Internal table only like "<b>IT_SORT = IT_SORT_INFO[]</b>".
Here i am making ALV output sorted on CARRID & FLDATE.
You can specify only the First Column name for sorting.
Regards,
Manju
Message was edited by:
MANJUNATHA KS -
How to get an email when data got inserted
Hi All,
Could you please let me know how to get an email when data got inserted into table by using sql/plsql
Thanks in adavanceCould you please let me know how to get an email when data got inserted into table by using sql/plsql
Well that seems pretty straightforward - write some pl/sql to send you an email when that pl/sql inserts data into a table.
See this Oracle-base article for an example of sending mail.
http://www.oracle-base.com/articles/misc/email-from-oracle-plsql.php
Post what you have tried so far. What part of what you have tried doesn't seem to be working? -
How to Get checkbox value when List value changed in classic report
hi ,
i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
take value of checkbox item and show it in message .
SQL for report
SELECT
'<INPUT TYPE="checkbox" NAME="f01" VALUE="'
||SEQ
||'">' SEQ,
ID,
DEPT_NO,
EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
i create JavaScript on the page
function test(pThis) {
var f01_value = $('select[name="f01"]').value;
alert('#SEQ : '+ f01_value);
</script>
I call this javascript function when list change but the value undefined..
My Question :
How can get this value Or any value of item in reports
regards
AhmedHi Ahmed,
>
i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
take value of checkbox item and show it in message .
SQL for report
SELECT
'<INPUT TYPE="checkbox" NAME="f01" VALUE="'
||SEQ
||'">' SEQ,
ID,
DEPT_NO,
EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
>
You should not create checkboxes like this. Either use the APEX_ITEM.CHECKBOX2 API or change the Column Type to Simple Checkbox.
>
now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
i create JavaScript on the page
function test(pThis) {
var f01_value = $('select[name="f01"]').value;
alert('#SEQ : '+ f01_value);
</script>
>
name="f01" returns an array, what you need is single element value.
Try
<script type="text/javascript>
function test(pThis) {
var f01_value = $v(pThis);
alert('#SEQ : '+ f01_value);
</script>
{code}
{quote}
I call this javascript function when list change but the value undefined..
My Question :
How can get this value Or any value of item in reports
{quote}
Depends in how you are invoking/triggering the change event. Are you using DA or have you written an "onchange" event on the element?
Cheers, -
How to get the display name of the dropdownlist?
How can i get the display name of the dropdownlist.
I want to have value as other data not the same as display name.
In that case is there any easy way to get the display name of the selection from the dropdownlist.I usually just use a hashmap to store the value and label, if I want to retrieve the label again later.
HashMap bleh = new HashMap();
bleh.put(dropDownValue, "Drop Down Label"); //Item value (any object), Item Label (String)
Iterator it = bleh.keySet().iterator();
while (it.hasNext()) {
Object key = it.next();
SelectItem selectItem = new SelectItem(key, bleh.get(key));
//And then later, when you want to retrieve the label
bleh.get(itemValue); //The item value of the label you wantThe value is easy to get because the selected item(s) from the list will be set to the value(s) the user selected. You should have a getter in your bean for that.
CowKing
Message was edited by:
IamCowKing
Maybe you are looking for
-
I usually buy apps from my computer but i am unable to send these on icloud. I use a windows 7 64-bit I upgraded my itunes and got the icloud control panel but i am not able to stream my photos or apps to it Can someone help.
-
Error in setting Pricelist/Currency code
I'm using Siebel Self-Services 8.1.1 and I always get the following error every for new session of the application: "Error in setting Pricelist/Currency code. Please contact System Administator". Anyone having an idea how to solve it? Thanks! /Jon-Er
-
Error in module RSQL of the datasource inter face
Hi All, We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module R
-
I have blackberry bold 9000 but I don't have internet from my provide. Now I have a simple question , why I can't login to my MSN on my blackberry via the WIFI ? I Keep receive this message service not enabled for the handheld, although I can use th
-
Can I use object methods in a class
I have a class ball and I am in the process of creating it's move method. I want this method to make the ball move depending on certain factors. One of these factors being where a bar has been stopped. I have a bar class which extends JProgressBar an