How to get loops to list hierarchially in browser like before?

I had a nice hierarchial list of my loop folders in the Loop Browser menu list for months, until I screwed it up today.
I had made main folders for my loops which contained subfolders, like this:
Beatnik (in gray lettering)
(indented) Drums
(indented) Percussion
(indented) Synths
and that whole section would be within divider marks, as a group. Then the next category, etc. etc. They were showing up in the browser menu that way, and I loved it. They were located in the root library/audio/Apple loops.
Unfortunately, I moved my stuff around today, and now I lost that nice hierarchial list. When I reindexed everything, now only the main folders, i.e. Beatnik, including the Jam Pack, are listed under the heading called "Other" instead of by itself like it used to be within dividers. My subfolders are not showing up anymore like they used to be.
I remember two things, vaguely: to get rid of stuff showing up in "Other" I had to get the folders out of the ~/...user loops, I think.
I remember there was a little trick I stumbled upon to get this hierarchy, like an extra nested folder, or something. In fact, I added a new folder this morning and had to place it within another folder, or something like that to still get the hierarchy, now I don't remember what but I remember I had to do it twice to get it to work. Without that trick, it didn't work, and unfortunately, I didn't write it down or commit it to memory. But I had a great list.
So, what causes the dividers to appear in the Apple Loop Browser Management list, so that folders will be listed hierarchially like they do in the finder? What is it that makes each section appear within the dividers? and show the hierarchy main folder/subfolder?
How can I get this back? Thanks.

Use the "Search Discussions" (upper right of this page) and use "question mark" as the search term. Limit the search to QuickTime.
Look for pages that have the green "Solved" star at the top of the page to find the answer.

Similar Messages

  • I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that  ! Do you get the idea ? Thanks !

    I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that  !
    Do you get the idea ?
    Thanks ever so much !

    the numbers manual can be downlaoded from this website under the Apple support area...
    http://support.apple.com/manuals/#numbers
    What your looking for is written out step by step for drop downs and all other special types of user input starting around page 96 in the '09 manual.
    Jason

  • How to get value from list item

    Hi all,
    How to get value from list item?
    I have a problem with the List Item object
    in the Oracle forms.
    How can I retrieve the selected item from
    a list ?
    I didn't find any function like 'list.GET_
    SELECTED_ITEM()'...
    thanks
    Bala

    Hello,
    You get the value as for any other Forms item:
    :value := :block.list_tem ;Francois

  • How to get Active users list in Essbase 6.5.6

    Hi Gurus,
    How to get Active users list in Essbase 6.5.6 version
    I dont find any Esscmd to find active users list....
    i used LISTLOGINS command in ESSCMD but its not helping me out....
    pls suggest me some approach to find active users list.
    Thanks in advance....

    Hi  ,
    Display sessions will give only active users details which are currently connected to the ESSBASE .
    if you need this list ? or  you need the  total list of   security  active users list ?
    if you need the currently connected to the ESSBASE
    if you check  one server  At a time  or you can check the application level also
    1)server level
    display  session all;
    2)application level
    display session on application  'application name ';
    go for the  run command ---> essmsh----->  login;----->enter user name ----> enter password----->enter host (like server name )  then you need to you   above  1 &2  commands
    Thanks,
    suresh

  • How to get the users list that can Add/Remove or modify Vendors in Oracle?

    How to get the users list that can Add/Remove or modify Vendors in Oracle?
    I need to generate a report like name and responsibility. Thanks

    That query gives the Supplier information.
    But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
    I assume it should be based on the Responsibility.

  • How to get Saved Selection list in javascript?

    Hello!
    Recently I met a little problem about save selection. I want to get saved selection list so that I can used in javascript. Now I have no ideals. Hope you tell me some useful information about how to get Saved Selection list in javascript!

    Mark is right, it's not possible.
    But do you know you can assign selection to a variable, and get back to it simply like this?
    var sel = app.selection;
    app.selection = null;
    /* your codes here
    app.selection = sel;

  • How to get page item list in  a page?

    how to get page item list in  a page?

    Have a look at ISpread::GetItemsOnPage().
    That should get you started.

  • How to get our company listed in 'Top Contributing Companies'

    Hi,
    How to get our company listed in 'Top Contributing Companies'?
    Regards,
    Murali.
    Message was edited by: Murali

    Hi,
    It's just a standard footer I'm using, preventing me to look up if a user is already on the map or not.
    The SDN admins are rather busy with TechEd, so ther might be a delay.
    Don't worry you will get your points.
    Eddy
    PS.
    Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
    Spread the wor(l)d!

  • How to get workflow task list ID?

    I created simple workflow in Office 365 SharePoint 2013 using SharePoint Designer 2013.
    The action Assign a task to user (Task outcome to Variable: Outcome |Task ID to Variable: TaskID) was used.
    The variable TaskID had a value something look like
    902aa0e9-0d58-47c0-a3ba-da96ebd47651, but I need ID from a task list.
    How to get the task list ID in SharePoint Designer Workflow?
    I am very grateful in advance for any help.
    bnossov

    I created dictionary and create two variables:
    Name: Accept; Type: string; Value:
     application/json;odata=verbose;
    Name: Content-Type ; Type: string; Value: application/json;odata=verbose;
    Output variable: JSonRequestHeader.
    I called HTTP web service:
    https://xxxxxx/_api/web/Lists/getbytitle('WorkflowTaskList')/items?$select=ID
    I used Count Items in Variables: JsonRequestHeader(Output to Variable: count)
    The output variable count had value equals 2.
    When I printed service url in browser it gave me xml with all the items ID in the
    WorkflowTaskList.  There were eight .
    How can I take data from web service and put them in dictionary?
    I would be grateful for any help.
    bnossov

  • How to make a select list editable or searchable like the combobox

    Does anybody know, How to make a select list editable or searchable like the combobox? Do we need a plugin here, where I can get it.

    Hi Nilesh,
    If this is what you are looking for http://apex.oracle.com/pls/apex/f?p=32395:3:1202144397644679
    get the combobox plug-in
    http://www.apex-plugin.com/oracle-apex-plugins/item-plugin/searchable-combobox.html
    I have not tried this though. Found it while searching for some other plug-ins.
    Regards,
    -Senthil

  • I have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending

    i have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
    Also the mail is acting very funny by not getting the rules work in a proper method.  Is ther a software to repair mail.

    i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check. 
    This problem just started for about 3 to 4 days now.  earlier it was working normally.

  • My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

    My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    kevinpowell1 wrote:
    how can i get it out of recovery mode?
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • How to Get details of list of SC from list of PO & vice versa ?

    Hello All,
    Can Please anyone tell me how to get the list of Shopping Carts from the list of PO. I have list of Purchase orders numbers. Can you please suggest any standard table or combination of standard tables from which I can get this report ?
    We have Stand alone system and do not have access to back end system.
    Thank you in advance.
    Digant

    you can use below code
    TYPES: BEGIN OF ty_po_guid_sc_guid,
                po_guid TYPE swo_typeid,
                sc_guid TYPE swo_typeid,
              END OF ty_po_guid_sc_guid.
    TYPES: BEGIN OF ty_sc_guid_sc_num,
                sc_guid TYPE guid,
                sc_num  TYPE crmt_object_id_db,
              END OF ty_sc_guid_sc_num.
    DATA: lt_po_guid_sc_guid TYPE STANDARD TABLE OF ty_po_guid_sc_guid,
             ls_po_guid_sc_guid TYPE ty_po_guid_sc_guid,
             lt_sc_guid_sc_num  TYPE STANDARD TABLE OF ty_sc_guid_sc_num,
             ls_sc_guid_sc_num  TYPE ty_sc_guid_sc_num.
    *Get the SC guid related to PO guid
    SELECT a~objkey AS po_guid c~objkey AS sc_guid INTO TABLE lt_po_guid_sc_guid
                  FROM srrelroles   AS a
                  JOIN bbp_pdbinrel AS b ON a~roleid EQ b~role_b
                  JOIN srrelroles   AS c ON b~role_a EQ c~roleid
                  FOR ALL ENTRIES IN lt_po_guid_sc_guid
                  WHERE a~objkey EQ lt_po_guid_sc_guid-po_guid.
           LOOP AT lt_po_guid_sc_guid INTO ls_po_guid_sc_guid.
             MOVE ls_po_guid_sc_guid-sc_guid TO ls_sc_guid_sc_num-sc_guid.
             APPEND ls_sc_guid_sc_num TO lt_sc_guid_sc_num.
           ENDLOOP.
           IF lt_sc_guid_sc_num[] IS NOT INITIAL.
    * Get the shopping cart number
             SELECT a~guid AS sc_guid b~object_id AS sc_num INTO TABLE lt_sc_guid_sc_num
             FROM crmd_orderadm_i AS a
              JOIN crmd_orderadm_h AS b ON a~header EQ b~guid
                  FOR ALL ENTRIES IN lt_sc_guid_sc_num
                  WHERE a~guid = lt_sc_guid_sc_num-sc_guid
                      AND b~object_type = 'BUS2121'.
           ENDIF.
    <removed>
    Please do not ask for points. Message was edited by: Zoltan Keller

  • How to get the whole list of Iview Templates

    Hi,
    when I navigate:
    Portal Content -> Content Provided by SAP -> Templates -> Iview Templates
    I get a long list of templates including Url Iviews etc
    But, when I try to create my own Iview, the list of potential templates is much smaller, mainly including only the SAP related templates, BSP, Query, ITS etc.
    Does anyone know how to make the full list of Iview Templates available for the Iview creation wizard ?
    Thanks,
    Tomas.

    Hi Tomas,
    which iView templates are offerd within the iView creation wizard is determined by SystemAdmin -- Permissions -- Portal Permissions -- Applications.
    Normally, you will have to have SuperAdminRole to see/change these settings.
    Hope it helps
    Detlev
    PS: Please consider to reward points for helpful answers. Thanks in advance!

  • How to get the material list displayed in CU50 transaction into ABAP report

    How to get the 'KMAT" type material list displayed in CU50 transaction into ABAP report?
    I am getting the entire BOM when i am using the FM CS_BOM_EXPL_MAT_V2 in to the table in the report.
    But I want only the material list displayed in CU50.

    Hi,
    Could you please tell us how you found a solution to your problem?
    Thanks & regards
    Hassan

Maybe you are looking for