How to get notified the AO profile has been finished

I am generationg an output analog profile usling the NI PCI-6014 DAQ (Windows2000/XP environment and VC++ 6 are used). My goal is to generate it once, but I do not want to make a synchronous call having a real-time application. So what I am doing is sending a waveform to the AO and stopping it on timer. Is there any possibility that driver notifies me at the end of the profile so that I could be more accurate time-wise?
Thank you in advance,
Mike Faynberg

From John: "Well, you managed to get in another posting while I was composing my reply. Do you have to use Traditional NI-DAQ?"
That's a great question- Mike, is there a specific reason you need to use Traditional NI-DAQ?
I have attached an example that outputs a single cycle of a buffer that you define; in my case I have built a 5000 point sine wave of amplitude 5V. I think you'll see that NI-DAQmx is much easier to program with and understand. It also offers increased performance.
Your card supports NI-DAQmx, so I would strongly suggest you consider using this API for programming. Please let us know if you have any additional questions.
Thanks-
Message Edited by Tom W. on 07-01-2005 01:08 PM
Tom W
National Instruments
Attachments:
aotest.zip ‏2433 KB

Similar Messages

How do I resolve the Activation Limit Has Been Reached on FrameMaker 10 message

I have 30 days to resolve this issue on my laptop, before I guess the software will stop working. I'm using FrameMaker 10 on my laptop, which had an upgraded hard drive. The previous hard drive has been destroyed. When I launched FrameMaker 10 today it indicated the version I have is still active on the previous hard drive. How do I DE-ACTIVATE that previous version if I no longer have the hard drive?

Hi,
You may have to contact Adobe Support using one of the below options and seek assistance for getting the product activated.
Phone - 800-833 6687 (IVR Options - 2 > 4 > 2)
Chat - Click here to contact Customer Care
For now, I was able to locate your account and have made the required changes. Please try it now and in case you face any issues, please contact support.
Regards,
Sharad

How do I identify the button that has been pressed?

Hi,
I have an application that has a single event handler which handles 8 different menu selection items (they happen to be sources for a scope display). Since handling any of these requires knowledge of all of these, it makes sense to handle all of them with a single event, rather than configure one event per button.
So, the question is, once I enter the event handler, how do I determine exactly which of the buttons (menu item, actually - sorry for the interchangeability) has been pressed? I have:
Source
Type
Time
CtlRef
OldVal
NewVal
as possible parameters, but none of these provide an identification as to which one was pressed. BTW, the reason for doing this is that if the change happens to result in an invalid configuration, I wish to reset the menu selection to the previous value.
Thanks,
Jason

As an alternate to searching refs, you can a) go the long way and just build one event per button or b) put the buttons into a cluster and search for the changed value that way.
An example of 'b' is attached (LV 6.1).
2006 Ultimate LabVIEW G-eek.
Attachments:
Which button event.vi ‏28 KB

How to get details Whenever an order has been blocked .

Dear friends,
                        Please provide me a functional spec for the below requirement. I dont have proper functional input So depending on SDN .
Need to write a program and schedule it so that ............
- Whenever an order has been blocked due to the following reasons
u2022     Credit limit
u2022     Outstanding balance
u2022     Order due
u2022     Balance credit limit
A output should be published with following details
u2022     Customer name
u2022     SAP order
u2022     Credit limit
u2022     Outstanding
u2022     Order due
u2022     Balance credit limit
Please help me with the table fields and the logic need to implement.
Your support is highly requested and rewards.
Thanks.

Hi,
In Sale order , you have delivery /Billing block.
LIFSK
FAKSK are the respective fields in VBAK table.
On the input screen ( Selection -screen)
Give date range and the sales area, Credit control area as input parameter.
Pick up all the sales orders (VBAK-Document Category should be ( VBTYP) should be 'C' and the delivery/ Billing block should be the required ones.
You will only find the code of the block in VBAK table. The description of the block will be in the table TVLS/TVLST.
You can get the sold to party also in VBAK table.
From the KUNAG in VBAK table, get the customer details ( Name Etc..) From KNA1.
The credit details of the customer( KUNAG) will be in the table KNKK and KNKA.
This program needs to be scheduled on daily basis and the output needs to be sent via E-mail to the concerned users.
( Use the FM SO_NEW_DOCUMENT_SEND_API to geneare the e-mail.).
Regards,
Sai

How to get notification that a mail has been read

Is there any way to use Java mail to tell if a mail that you sent has been read?

I think you are asking too much....
ok fine i will put that in a different way...see for sending mails you are using JavaMail right.... and u might be sending mails to other mail servers say yahoo.com or hotmail.com...or anithing else... so when the person at the other end reads the mail...say yahoo.com... yahoo server knows that the mail is read... so it is impossible to reply back automatically to the person who sent the mail...
yeah it is very much possible if this is with in the server...say withing your organisation like <[email protected]>...so that u are implementing both the parts i mean reading mails and writing mails... so the control is in your hand.
I hope I am very clear...
all da best
kiran

TS1398 My iPhone 4 is connected to wi-fi when i am home, but when i leave, i do not get any of my whatssapp messages. When i get back home again I get all the messages that has been send through the day. We do have 3G on network. Why is this?

MY iPhone4 is connected to wi-fi, and all is fine at home. When i leave home, i do not get any of my whatsapp messages. When i return home, i get all the messages than was send during the day. Why does my phone not use the cellular network to get my whatsapp messages as my Nokia N8 did?
This is my first iPhone, so i am having some troubles setting everything up!

Please make sure that you are connected to the internet. There sould be a "3G or LTE or 4G or E symbol on the top left corner of the screen, if data is available to you.
Whatsapp uses data services to send and receive messages. You need to be connected to the internet for that.

How to enable back the menu bar has been disable?

I has been disable the menu bar. and i want to enable back
== This happened ==
Every time Firefox opened
== when i disable the menu bar

'''ALT V
T
M'''
Be sure to do this in a blank tab.

How to get a report after blocks has been removed in MRBR

Hi,
After removing the blocks manually in MRBR. We can see the invoices with X mark which had blocked for (price, qty or date) block in MRBR report.
But when we remove the block automatically (i.e release block automatically), if we again go and check in MRBR their won't be any blocks (which shows "X" mark) in MRBR report.
Can anyone suggest me is there any report which shows the invoices which got automatically released and the blocked reason (price / qty / date block).
Thank you,
Vinay

I'm 99.9% sure there is no such report or even possibility.
Regards,
Nick

The database structure has been modified - how to check if it happend?

Hello,
I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
My question is - does anyone know how to check if database structure has been modified?
Regards,
Hmg

Hi Szymon,
I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
Satish.

How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.

How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.

i'm not quiet sure atm but should normally work like this:
connect to itunes store -> log out with ur account (upper right corner where ur apple id is displayed) -> sign in with ur wifes apple id -> activate computer (store->activate this computer)
normally it should work this way but ur wife wont be able to use apps or music within itunes library purchased with the other apple id

Downloaded 3.6 version of firefox and it changed my favorites, quicken, other files back to 1.5 yrs ago. How do I get back the info it has erased or hidden from me???

Question
Today downloaded 3.6 version of firefox and it changed my favorites, quicken, other files back to 1.5 yrs ago. How do I get back the info it has erased or hidden from me???

What do you mean by '''''"changed my favorites, quicken, other files back to 1.5 yrs ago"'''''? More detail please.
 
You have an item installed that is considered malware/spyware/adware. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Ask Toolbar Plugin Stub for 32-bit Windows
Unfortunately, it is becoming more and more common for these kinds of "extras" (toolbars, security scanners, etc.) to be added to your browser/system/desktop when adding or updating other software, some from very well-know software vendors. You must carefully read information before downloading any "free" software and be very alert during the install process for any opportunity to opt-out of "extras" being installed.
'''If you have the Ask Toolbar''' 
* First try to disable or uninstall the Ask Toolbar in Firefox via "Tools -> Add-ons -> Extensions". See: [[Uninstalling add-ons]] 
*In some cases, you may need to uninstall the Ask Toolbar using Windows Control Panel .
**See [http://support.mozilla.com/en-US/kb/Cannot+uninstall+an+add-on#Uninstall_from_Windows_Control_Panel Cannot uninstall an add-on - Uninstall from Windows Add/Remove Programs].
'''You '''MAY''' need to reset your homepage''' if an Ask search page opens when first starting Firefox. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
'''You ''MAY'' need to reset a preference''' if searches from the URL/location bar take you to an Ask search page. 
To reset the preference related to Ask search from the URL/location bar via about:config, specifically the keyword.URL preference - 
*Open a new tab or window.
*Type '''''about:config''''' in the URL/address bar and press the Enter key
*If you see a warning, accept it (promise to be careful)
*Filter = keyword.url
*Right-click on the preference below the Filter, and choose Reset
*Restart Firefox (File > Restart Firefox)
*See: http://kb.mozillazine.org/Keyword.URL for details.
Also see: 
* http://kb.mozillazine.org/Problematic_extensions#Ask_Toolbar
* http://kb.mozillazine.org/Uninstalling_toolbars
 
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe PDF Plug-In For Firefox and Netscape "9.3.3"
**New Adobe Reader X (version 10) with Protected Mode just released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Shockwave Flash 10.1 r82
*Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
**4 updates behind
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''. Note separate links for:
#**Plugin for Firefox and most other browsers
#**ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I thought the same too, looks like its not just me having this issue, hope Apple do something soon. Thanks for your help

HT5129 I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . . but I have not knowingly published any photos to MobileMe. How can I get this message to stop. It's getting annoying.

I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . . but I have not knowingly published any photos to MobileMe. How can I get this message to stop. It's getting annoying.
Also, how can I remove duplicate photos in an album without doing it manually?
Thanks!

When the prompt pops up next time you start iPhoto select Learn more. Then click on iPhoto preferences and select the Accounts tab. Delete your MM account and the quit iPhoto. Next time you open iPhoto the problem should be eliminated.

Can anyone tell me how i get to speak to someone in customer service? they are retiring Forms Cental and i really need to speak to someone about the renewl of my subscription. THe live chat has been unavailable for two weeks and there is no other option t

Can anyone tell me how i get to speak to someone in customer service? they are retiring Forms Cental and i really need to speak to someone about the renewl of my subscription. THe live chat has been unavailable for two weeks and there is no other option to get in touch with these people. Any ideas anyone?

Hi SwarovskiUK,
I'm sorry to hear that you've been having trouble contacting Customer Care. Live Chat is certainly available--are you not seeing the chat option on the Contact Customer Care page? Or are just not able to get through?
In any case, I should be able to help you myself. What can I do for you?
Best,
Sara

How to get notified the AO profile has been finished

Similar Messages

Maybe you are looking for