How to get only Active employees in Org Chart (ESS ? Emp search OrgChart)

Hello gurus,
The setting for the Who's Who service in ESS is set to retrieve only
active employees. The value in T77S0, group: ESS, Sem. ABrr is STAT2
and the value is 3. However, after searching, the Org Unit is a link
that you can click and it will take you to that Org Unit and display
the people that are in that Org Unit. However, this display will show
people that have a status of inactive.
Q:How to set the system to show only active employees.
ERP2004 -ESS
Thanks in advance, Abdul

abdul can you pl goto IT 0 and check the help on stat2 filed and find what doesn't the value 3 means.
pl reply with the same.

Similar Messages

How to get only active records from MDM.

Hi all,
How can i get only the active records from MDM table.Now i am getting all the records in MDM table in my Master Report Iview.Only some of the records r active.can i get just the active records.If yes,how can i do that.
regards
kukku

closing

In Table Control How to get only a single row .

Hi
In Table Control How to get only a single row .I am able to decrease it its height to 4 but then 2 rows is getting dsplayed .I want only one row to be display and 2nd row should be deactivated or not visible.
regards
Avik
Edited by: Julius Bussche on Jan 30, 2009 1:10 PM
Removed friendly greeting from the subject title

Hi Avik
use this code it will help you.
MODULE passdata OUTPUT.
READ TABLE it_revision INTO wa_rev INDEX tab_clc-current_line.
IF sy-subrc = 0.
    LOOP AT SCREEN.
      IF screen-group1 = '111'.      " 111 IS THE GROUP NAME
        screen-input = 1.          " input mode
        screen-active = 1.         " input mode.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 = '111'.       "GROUP NAME
        screen-input = 0.           " display mode
        screen-active = 1.          " DISPLAY MODE.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDMODULE.                 " PASSDATA OUTPUT
Make sure in group tou are passing the field name that you want in input mode on the base of other field
Hope it will help you.
Thanks
Arun Kayal.

Nakisa OrgChart 3.0 SP1- Staged extracting only active employee

Hi Experts,
We have OrgChart 3.0 SP1 Staged environment. It extracts only active employees. Itu2019s not extracting other employee having other employment status (say inactive- employee who are on maternity leave for example).
How we can set extraction so that we can see all the employee in organization irrespective to the employment status?
Thanks
Dave

Luke is right about STAT2 being employment status and how to remove it. But rather than simply removing it, then confirm your requirement more clearly by looking at the various employment statuses you have defined and which ones you can need (or can exclude).
Also you might need to extract PA2001 (Absences) if you have a requirement around maternity leave (although I would still expect these to be 3 - "Active" employees!) and write some explicit logic in the joinconfiguration.xml to include employees you wish to see in the OrgChart and exclude those you don't.
Regards,
Stephen

How to get only current exception message from tables

Hi
In my sceanario , I want to have the list of Current MRP exception messages list from table
I understand that MRP detailed lists, including all exception messages, are stored in transparent table MDKP and cluster table MDTC.
I can tell ABAPer to write a report for me , to read the data from these tables , but I guess these tables contain old exception message also , which are not currently appearing in MRP list
How to get only current exception message
Rgds,
sandeep

Sandeep,
MDTC contains only data from the most recent MRP run. So, all messages you see are those which are currently valid.
The messages might have first appeared during a previous run, but they still need to be addressed.
Before you invest a lot of time and effort into writing and debugging a custom report, you should probably try to use the standard SAP functionality found in MD06. On the Processing indicator tab, you can select "Only with new exceptions". Here you can tag a material/plant as 'processed', and thereafter, the exceptions that existed there before you tagged the part will not be re-displayed.
Best Regards,
DB49

HR employee data (ONLY ACTIVE EMPLOYEES) needs to be sent from one SAP syst

Requirement: HR employee data (ONLY ACTIVE EMPLOYEES) needs to be sent from one SAP system to another SAP system.
E.g. of process followed u2013
Tcode - PA30 - Action type u2018Hireu2019 is created for employee A, B, C & D for a specific date. Later another action u2018Retirementu2019 is created for the employee C. So in the current system employee A, B and D are active employees wherein employee C is an inactive employee.
Data filtering is set in the Distribution Model wherein only active employees should be passed when an IDOC is created using PFAL.
The IDOC which is created has all the employees A, B, C & D. The only difference being that for Employee C the segment which has the status u2018Retirementu2019 is discarded and hence this does not satisfy the requirement.
Is there any way in which the Inactive employee (e.g. retired) is restricted from being sent to the IDOC.
Please advise.
Rasika

Hi Darek,
Thanks for your response.
I cannot use this as the requirement does not allow customised development. I want to know whether the filter can be done solely by customising.
Regards,
Rasika

How to get Smartfilter Activation certificate?

I am not sure if this is a place to ask this question. But after no luck i thought of posting it here to get an answer.
I am using Content Engine 565 with ACNS. The CD accompanied with this product contains Smartfilter console and server. The documentation says that Cisco also provides an activation key via which product can be activated at www.securecomputing.com.
Please let me know how to get that activation key to get a license for Smartfilter.
Thank you.

Pankaj,
SmartFilter licenses are obtained directly from Secure Computing. You can find more information here:
http://www.securecomputing.com/cisco/index_sf.cfm
~Zach

CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?

CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?

Error "The serial number is not valid for this product" | Creative Suite

How to get only the first result in extract function

do you know how to get only the first element of the function extract.
v_result := p_response.doc.extract('//'||p_name||'/child::text()').getstringval();
if i have 5 responses like '100','100',100','200','200' e get '100100100200200' and i want only '100'.
thanks in advance

Two ways .....
1. Use Javascript E4X instead ...there are nice functions for getting children of parents.
2. Cycle through all of the form1.nodes and look for objects that have a className of "subform". For loops are useful for this task.
Make sense?
Paul

How to get the active application users IP address in R12 by sql command

Hi ,
I need to know how to get the active application users IP in R12 by sql command
in order to kill any session by the IP address ?
Am working on 12.1.3 Application
And 11.2.0.3 Oracle Database
Thanks

936921 wrote:
Am still couldn't found the IP address for the connected Application users.
If there any select statement can help me with that?
Really? Then how do you explain me finding the following docs from the links I referenced above?
How To Find The IP Address Of The Client Machine From Where A Particular Forms User Is Connected ? (Doc ID 879092.1)
How to Track IP Address of the Form Session in Oracle application 11i (Doc ID 878931.1)
Where to find the Client IP Address for a Client in E-Business Suite? (Doc ID 1258415.1)
How To Get The terminal ID For The Machine From Which A User Is Logged To E-Business Suite Applications (Doc ID 751658.1)
Thanks,
Hussein

RRB-How to get the activity description instead of WBS element in the bill

Dear All,
I am using RRB DIP profile to do my Resource related billing
RRB-How to get the activity description instead of WBS element in the billing
document.Now iam able to get the cost and the quantity used as line items but instead of getting the respective line items in the invoice iam still getting the WBS
element description for all the activities.Can some body guide me to overcome this problem.
Assured reward points for your suggestions and help.
Thanking you,
Best regards,
R.Srinivasan

Dear All,
Please can any body help me for the same.IT is urgent.I will award you points.
thankyou,
Best regards,
R.Srinivasan

How to get PERNR from employee search(teamviewer) iView in to a WD-4-ABAP.

Hello All,
I had developed a new Web Dynpro for ABAP (WD4A) component for updating a custom Infotype. This application is meant for the manager to maintain some specific data through portal for his employees in the team.
WD4A application is built based on the employee number it receives from the portal.
     How could I get PERNR from employee search(teamviewer) iView in to my WD4A component?
In portal I had developed a test page by copying the standard page from MSS com.sap.pct.erp.mss.general_information, and added my WD4A application through an iView into this page.
Then I hided all the other iVews in the page except (1) employee search and (2)my WD4A iVew. On the preview everything appears fine.
During the preview of this page it triggers the WDDOINIT of WD4A component main view and then the WDDOMODIFYVIEW. When I select an employee from the employee search, then it triggers only WDDOMODIFYVIEW in the WD4A application and not the WDDOINIT anymore.
In my WDDOMODIFYVIEW I had inserted the following code:
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_portal_manager TYPE REF TO if_wd_portal_integration.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_portal_manager = lo_api_component->get_portal_manager( ).
DATA lo_api_controller TYPE REF TO if_wd_view_controller.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_portal_manager->subscribe_event
    EXPORTING
      portal_event_namespace = 'urn:com.sap.mss.employeesearch'
      portal_event_name      = 'selection_changed'
      view                   = lo_api_controller
      action                 = 'GET_SELECTED_PERNR'.
And in the action: 'GET_SELECTED_PERNR'
METHOD onactionget_selected_pernr .
DATA lv_str_pernr TYPE string.
DATA lv_strlen TYPE i.
DATA lv_pernr TYPE pernr_d.
DATA lv_offset TYPE i.
wdevent->get_string(
EXPORTING
name = 'PORTAL_EVENT_PARAMETER'
RECEIVING
value = lv_str_pernr ).
lv_strlen = STRLEN( lv_str_pernr ).
lv_offset = lv_strlen - 8.
lv_pernr = lv_str_pernr+lv_offset(8).
ENDMETHOD.
This is not functioning form me. The action is not getting trigged with the code in WDDOMODIFYVIEW.
I had gone through several threads in u2018SDN say:
     Pass pernr to WebDynro
     MSS - General Information - Related Activities Links persnr.
     SAP Note: 1112733.
Most of the threads are answered but incomplete. In some threads people shared document personally which had been helpful.
I am stuck with this scenario of handling the employee number from employee search iView. Helpful suggestions will be rewarded for sure.
Thanks in advance.

Do i understand you correctly that you are not getting the portal event ?
This can be several reasons ?
Both portal system and WDA server has to be in same domain and same proptocol to communicate with Portal event.
Please check in that direction and search posts on this topic.

How to get top 10 employees in BEx Report

Hi all,
I am trying to get top 10 employees who have worked over 50 hrs of overtime in any pay period i choose in query.
How do i get it ??
right now my report gives me total of over 50hrs overtime in all chosen pay period employees list.
Any suggestions ??
Thank You,
KSmith

CAN SOMEONE PLEASE HELP ME SOLVE THIS PROBLEM ??
Hi all,
The problem I have is even though i tried condition for top 10 employees who worked more than 50 hrs.
My report right now shows all employees overtime under "OT" key figure for each pay period. --> I just want to show employees and overtime which is > 50 for each different pay period
The condition works only if i display just one pay period...and user dont want it that way. they want to get more than one pay period displayed on the report and should have list of employees who work more than 50 hrs over time. HOW DO I GET THAT ??
Also there is another key figure count meaning if out of those chosen pay periods there are 3 periods when an employee worked more than 50 hrs of over time then it should show "3". if there 2 pay periods when employee work more than 50 hrs count should display 2 ---> right now i am not able to get that also.
Please can some one suggest something ??
Thank You,
KSmith
Edited by: Keral Smith on Jul 25, 2008 2:49 PM
Edited by: Keral Smith on Jul 25, 2008 3:08 PM

How to get the activity of a user?

Hi Experts,
How can we get the activity of a user i.e. Which transaction a particular user has gone or some activity log on a particular date? Any table, FM or Tcode. I have already checked the STAD and SM20 transactions. Some authorization problem. So anything except these Tcodes would be helpful. Thanks in advance.
Regards,
Prashant.

>
santhosh kumar wrote:
> Hi,
>
> I guess if it is not updated or traced under STAD means, i.e. related to authorization failures etc.. kind of stuff will be saved at runtime only in the SAP memory.
>
> As it is stored in the buffer, can not be traced in any of the transaction.
> You should request the user to save and send the screen shot of the SU53 of the user whenever he gets some authorization issue.
>
> Based on that, by looking into the SUIM transaction, it can be known whether he is authorized or not, which roles have been assigned etc.. kind of details.
>
> Regards,
> Santhosh.
Hi Santosh,
Actually I am doing a root cause analysis for which I need to know whether a particular user has used a particular TCode. I guess the STAD will display only the current data, is there a TCode to display historical data related to user accessing a particular data. Note: I don't have basis authorization.
Regards,
Prashant

How to get only column names from different tables as single table columns

Hi All,
I have one requirement in which we want only column names from different tables.
for example :
I have three tables T1 ,T2, T3 having
col1 clo2 clo3 --> T1 ,
col3 col5 ,clo6 --> T2 ,
Clo6 col8 col9 --> T3
columns i want to get only all Column names from all table as single Resultset not any data from that how can i get that empty resultset
because this empty result i want to bind in datagridview(front end) as Empty resultset
Please tell me anyways to do this
Niraj Sevalkar

If I understand you want an empty result set, just with metadata. SET FMTONLY do the trick:
SET FMTONLY ON
SELECT Col1, Col2, Col3, ....., Coln
FROM
T1 CROSS JOIN T2 CROSS JOIN T3
SET FMTONLY OFF
Another alternative is to include an imposible contition
SELECT Col1, Col2, Col3, ....., Coln
FROM
T1 CROSS JOIN T2 CROSS JOIN T3
WHERE 1 = 0
If you are using a SqlDataAdapter in your client application. You can use the FillSchema method. the select command may be any select statement that returns the columns you want. Under the covers FillSchema will call SET FMTONLY ON.
If you are using SqlCommand.ExecuteReader you can pass SchemaOnly to CommandBehavior argument. SET FMTONLY ON is called under the covers. Again the select command may be any select statement that returns the columns you want.
"No darás tropezón ni desatino que no te haga adelantar camino" Bernardo Balbuena

How to get only Active employees in Org Chart (ESS ? Emp search OrgChart)

Similar Messages

Maybe you are looking for