How to get out the E+ from the axis in Diadem Report?

Hallo
on the photo you can see numbers written like 10E+5 etc.  Like I have done the 10^5 shall be written in front of the unit and not after the numbers.
The channel is created with Diadem Analysis
Thank You

Hi,
You can sclae the channel by 10^-5 if you're already considering that portion in the unit. You can do this in a script using the following. Otherwise it's in the basic mathematics portion of Analysis.
Call ChnLinScale("Group/Channel","/LinearScaled",1E-05,0)
Hope that helps!

Similar Messages

  • How to get out program information from JVM?

    I want to develop a program, in which a listener listen to JVM's operations. When a property of an object had changed, the listener can get out the property's name and value from JVM. That means I would like to monitor what JVM had done using some API.
    I kown that JDI can do this, but I don't know how to code it. I would like to get a piece of example code!
    thanks.

    have a look here:
    http://robocode.alphaworks.ibm.com/docs/jdk1.3/guide/jpda/jvmdi-spec.html
    you need to write a native application (a shared object or a dll) in order to listen to the VM

  • How to get out the business card from cd pocket on macbook pro ??? please help !!

    my child put a business card to the cd pocket !! please let me know if there is any way to get it out ???

    Oh... don't forget to send your kid the bill 
    The other thing to try is to wrap double sided tape on a tooth pick and try to insert carefully and try to get the card to stick to the double sided tape, then extract.

  • My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

    My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    kevinpowell1 wrote:
    how can i get it out of recovery mode?
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • How to get all the values from the dropdown menu

    How to get all the values from the dropdown menu
    I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
    How do I get number of item is selection dropdown?
    How do I extract a ?name? for each value, one by one?
    How do I change a selection by referring to particular index of the item in a dropdown menu?
    Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
    RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
    Message was edited by: testtest

    The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
    <Select Name=ProdType ID=testProd>
    </Select>
    I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
    Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
    If I want to search by id I could do the following:
    Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
    Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
    You can use the FindElement to grab links, text boxes, etc.
    The next example grabs from a link on a page
    Home
    Set x = RSWApp.om.FindElement("Home","A","innerText")
    I hope this helps clear it up.

  • For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

    For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

    contact itunes support

  • My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

    my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

    It sounds like you destroyed your boot partition and the recovery partition.  Depending on it's age, your MacBook Air might be able to do a net boot.  Plug and ethernet connection into it and attempt to boot.  If it has the right firmware, it will find a net boot configuration on the net and boot that.  Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML.  If your computer came with Snow Leopard, then even the net boot won't work. 
    At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD. 
    An Apple Store, if there is one nearby, MAY be able to get you going again.  However, whatever is on the SSD now will be toast too.

  • How to find out the metachian from subchain

    hello friends,
    could you please let me know , how to find out the meta chain from subchian .
    I know the subchain name and wanted to check that this chian is included in which meta chian ,
    actaully here so many chain , so its confusing .
    Is there any way ?

    Hi,
    Pls chk this links,
    Re: Meta chains - how to create n example scenerios
    Re: How to create process chains, infopackage groups & Meta chains
    Hope this helps,
    regards
    CSM reddy

  • How to find out the batches released from ASCP

    hello gurus,
    Please let me know how to find out the batches which is released from the ASCP in the OLTP OPM instance, like for the Discrete in the WIP Order in the others tabe we can see that there will be a message like " Job mass loadded on......". So is there any way that we can findout whether the batch is released from the ASCP or is it manually created.
    Thanx & Regards

    Hi,
    You can check it in SM59 if there are any RFC destinations for the above systems.
    Alternatively ,check the table RFCDEST if any entries are maintained
    Regards,
    Lakshman.

  • How to find out the BI Publisher Version from the Excel output file

    Hi,
    Can any one tell me How to find out the BI Publisher Version from the Excel output file generated using BI publisher.

    Take a look at it in notepad or a text viewer... it's just a MIME/HTML file...
    Example:
    From: "Created by Oracle BI Publisher 10.1.3.4.0" <>
    Subject: Created by Oracle BI Publisher 10.1.3.4.

  • How to find out the BI Publisher Version from the Excel output generated.

    Hi
    Can any one tell me How to find out the BI Publisher Version from the Excel output file generated using BI publisher.
    Edited by: 781689 on Aug 1, 2010 10:22 PM

    Hello,
    This forum is the "Oracle Reports" OTN Forum.
    The "BI Publisher" OTN Forum is here :
    BI Publisher
    Regards

  • How to find out the tables effected information from oracle from

    can any one tell me how to find out the tables effected information from oracle form

    Hi,
    Please refer to the following documents.
    Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i
    Note: 241628.1 - How to Find the Query That Succeeded Recently?
    Regards,
    Hussein

  • How can i get out the reading list???

    how can i get out the reading list?

    This really needs to be posted in the Safari forum but I will answer it here.
    What do you mean by get out? You want to see the list? Clicking on the pair of glasses controls the display of the list. The glasses are in the gray bookmark bar. Click once to open and click again to close the reading list.

  • I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form".  I can't figure out how to get to the page that you choose which form you want

    I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form".  I can't figure out how to get to the page that you choose which form you want. How would I do that?

    Pct,
    In the Numbers spreadsheets window where all your documents are shown as icons, tap the Plus Sign.
    Choose Create Spreadsheet
    Select the template you want to use
    Jerry

  • From my session how to find out the version of my oracle client ?

    From my session how to find out the version of my oracle client ?
    Thanks in advance

    Client version?
    BTW, trying all forums?

Maybe you are looking for

  • Bug with SET_LOV_COLUMN_PROPERTY Built-In (or FORMS_SUCCESS). FRM-41364.

    Hi everyone, I have an in-house pll library which supports the translation of custom forms into multiple languages. By and large, this code works perfectly fine. One of the tasks of the code is to analyse a given custom-form, and create a list in a c

  • ALC-WKS-007-027 problem

    Hi, I met a ALC-WKS-007-027. Here's server log. It seems a invokation exception. Could anyone help on this? Thanks in advance. xception: ALC-DSC-003-000: com.adobe.idp.dsc.DSCInvocationException: Invocation error. incomingMessage: Flex Message (flex.

  • Advise for a pseudo-data warehouse?

    Hello: We are looking into setting up a database that is a mirror of our production environment for querying only. Running of queries in our production environment has proven to be too much of a strain on resources. I have been researching setting up

  • Making an iweb multi-media site Compatibe for the many windows OS folks

    I really wonder how I can build my site so that the many poor folks stuck on Windows, (God Help Them) can readily view my videos, and listen to my music? Streaming Videos: Will my Videos play on a windows media player, or will they need to download a

  • Problem with share calendar/tasks/notes on outlook 2010

    Hello, The problem I have is with outlook 2010 and 2007 that connect to Exchange 2013 ( The problem happening outside the domain) When I am trying to share calendar/tasks/contacts I get this massage " Error while preparing to send sharing message" Af