How to get purchasing data from SAP R/3 to Flat files
Hi,
Please can anyone help me to get the data from Purchasing extractors (2LIS_02_ITM, 2LIS_02_SCL, 2LIS_02_S012) to flat files? Here we dont want to load data from R/3 to BW for reporting, wanted to load data from flat files to OWB (Oracle warehouse builder) for reporting. So Is there anyway to generate data into flat files from Purchasing extractors (Full and deltas)?
Thanks,
Pavan.
Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
strtab
USING
'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*& Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
USING ittab TYPE any.
DATA:
h_zaehler TYPE i,
line_str TYPE string,
l_tabellenname(10) TYPE c,
l_arbeitsbereichsname(10) TYPE c,
h_string TYPE string,
h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
<l_arbeits> TYPE ANY,
<feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
CLEAR: h_zaehler, line_str.
line_str = ittab.
DO.
ADD 1 TO h_zaehler.
ASSIGN COMPONENT h_zaehler OF
STRUCTURE <l_arbeits> TO <feldzeiger>.
IF sy-subrc <> 0. EXIT. ENDIF.
WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED. "#EC *
h_string = h_char.
CONCATENATE line_str separator h_string INTO line_str.
ENDDO.
APPEND line_str TO strtab.
ENDLOOP.
ENDFORM. "data_to_string
Similar Messages
-
How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).
Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
strtab
USING
'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*& Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
USING ittab TYPE any.
DATA:
h_zaehler TYPE i,
line_str TYPE string,
l_tabellenname(10) TYPE c,
l_arbeitsbereichsname(10) TYPE c,
h_string TYPE string,
h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
<l_arbeits> TYPE ANY,
<feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
CLEAR: h_zaehler, line_str.
line_str = ittab.
DO.
ADD 1 TO h_zaehler.
ASSIGN COMPONENT h_zaehler OF
STRUCTURE <l_arbeits> TO <feldzeiger>.
IF sy-subrc <> 0. EXIT. ENDIF.
WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED. "#EC *
h_string = h_char.
CONCATENATE line_str separator h_string INTO line_str.
ENDDO.
APPEND line_str TO strtab.
ENDLOOP.
ENDFORM. "data_to_string -
How to extract required data from a column to a flat file
my ssis package is working OK. However, I want to refine one of the column extraction.
when data is extracted to the flat file, I just want to the initials, firstname, lastname e.g.
FZ = Ben Smith, Add1, add1, etc
the only bit that i want is Ben Smith
how can i state in the package to just give me the name and exclude the rest
sukaiAdd a derived column task to extract Name part alone and give expression as below
LEFT([ColumnName],FINDSTRING([ColumnName],",",1)-1)
If before SSIS 2012 use SUBSTRING
SUBSTRING([ColumnName],1,FINDSTRING([ColumnName],",",1)-1)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
How to get internal table from SAP Data Provider C#
Hello.
ABAP:
DATA: lt_t001 TYPE TABLE OF t001.
DATA: url(1000) TYPE c.
SELECT * INTO TABLE lt_t001 FROM t001.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'APPLICATION'
subtype = 'X-R3TABLE'
TABLES
data = lt_t001
CHANGING
url = url
EXCEPTIONS
OTHERS = 4.
C#:
using SAPDataProvider;
using SAPTableFactoryCtrl;
public void SetDataFromUrl(string url)
SAPDataProviderClass p = new SAPDataProviderClass();
p.SetDataFromURL("APPLICATION", "X-R3TABLE", url);
ISapDPR3Table tbl = p.GetDataAsR3Table("APPLICATION", "X-R3TABLE");
SAPTableFactoryClass tf = new SAPTableFactoryClass();
Table tb = (Table)tf.NewTable();
tb.ISAPrfcITab = tbl.DataTable; // Exception !!!!!!
How to get internal table from SAP Data Provider ?Hi Sergey,
I'm trying to do the same, have you found a solution to solved it?
thanks for your help.
Regards.
Jonathan -
How to retrieve the data from SAP database.
Hi Pals,
How to retrieve data from SAP R/3 System to my third party software. I will make my query little bit more clear. There is a list of assets entered and stored in the SAP system. For example 3 mobile phones.
1) Mobile 1- Nokia
2) Mobile 2 - Samsung
3) Mobile 3 u2013 Sony
Now think I do not know what all assets is there. I have to retrieve the data and get it on my third party software. Just display the list of assets. Lets say SAP XI is also there. Now how will I map it and get the details.
Please give me step by step method.
N.B: Just to read the data from SAP database.
Please make the flow clear step by step.
Thanking you
AKHi,
You can use RFC or ABAP Proxy to make synchronous call with SAP.
Under RFC or ABAP Proxy Program you can get the data from SAP tables. Direct access to SAP Database is not preferrable even if its possible.
The better way to go for RFC or PROXY.
You will send the request from Third party system and the it will be as input parameters from RFC/ Proxy it will response based on it.
This got it all..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
HTTP to RFC - A Starter Kit
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Refer
Thanks
Swarup
Edited by: Swarup Sawant on Jun 4, 2008 9:32 AM -
How to get all data from nokia to i5s
how to get all data from nokia E71 to i5s???
if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.
-
How to get the data from multiple nodes to one table
Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
IndraHI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM. -
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
How to extract PS data from sap r/3 to bw
Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya -
How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.
If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/ -
How to retrieve the data from SAP-BAPI by using VB Code
Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
oZEmp_Header.Value("ADDR1") = txtAddr1.Text
oZEmp_Header.Value("ADDR2") = txtAddr2.Text
oZEmp_Header.Value("CITY") = txtCity.Text
oZEmp_Header.Value("PHONE") = txtPhone.Text
boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
x = oreturn.Value("Message")
If x = "" Then
MsgBox "Transaction Completed!..."
Else
MsgBox x
End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
SapConnection.logoff
SAPLOGIN = False
Exit Sub
LogoutFehler:
If Err.Number = 91 Then
Exit Sub
Else
MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
Set FunctionCtrl = CreateObject("SAP.Functions")
Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
SapConnection.Client = "010"
SapConnection.Language = "EN"
SapConnection.System = "PR1"
SapConnection.SystemNumber = "00"
'SapConnection.Password = ""
SapConnection.GroupName = "PR1"
SapConnection.HostName = "168.9.25.120"
SapConnection.MessageServer = "168.9.25.120"
If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
Set SapConnection = Nothing
DoCmd.Hourglass False
MsgBox "No connection to SAP R/3 !"
SAPLOGIN = False
SAPLOG = False
Exit Function
End If
SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
If Not SAPLOGIN Then
If Not SAPLOG() Then
MsgBox "No connection to SAP !", 16
SAPLOGOUT
Exit Function
End If
End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
If func1.exception <> "" Then
MsgBox "Communication Error with RFC " & func1.exception
End If
DoCmd.Hourglass False
SAPLOGOUT
Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
MatDescr = "PART NO. NOT FOUND"
End If
End Function -
How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............
Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay. -
How to get purchased song from iphone to itunes on computer
how to get purchased song from iphone to itunes on computer
Open itunes, connect iphone, Click File>Transfer Purchases
Maybe you are looking for
-
Am attempting to link a Stored Procedure into a new Crystal report using an ODBC datasource. Receiving the following Oracle/ODBC error : ora-01456: may not peform insert/delete/update operation inside a READ ONLY transaction. Database is an Oracle 10
-
My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all th
-
Replace function - only for characters?
When I'm using the replace function below, I get an error message stating: replace(char,char) in java.lang.String cannot be applied to (java.lang.String,java.lang.String) Does anyone know why this happening? Shouldn't this function work for strings?
-
i am doing a project for school and i need to know what region apple targets and what age group and what religion and what race and ethnics group. if you can answer any of these plz respond thanks
-
Hi I am using Numbers '08. I have a document/ template with about 10 sheets that i have created. It doesn't have a lot of data in it yet, just formulas and conditional formatting ready for when i start imputing my data. It takes around 5 mins to open