How to get rid of AME folder defaults

Can somebody please tell me how to change the default folder setting that Adobe Media Encoder use when rendering my after effects projects?
Right now, whenever I add my after effects project to the AME Render Queue, I can see that AME is creating its own folder inside my project
folder. It inherits the project folder name and adds _AME and that's where the video file gets rendered.
I'd rather not clutter up my HD with these auto generated folders. How do I switch this default off and just get the rendered video files to
land in the same folder as my project? I've looked for where to change these settings but it eludes me.
Thanks in advance.

Upon closer inspection Rick, it seems like I just wasn't paying attention. As soon as I ticked that box and specified a folder it got rid of the dreaded default AME folders?
But, rather than specifying a folder, I much preferred it when AME used to default to rendering my video files in the same folder as my project. No folder specification required.
I'm pretty sure that this was the original default state when I first installed AME, ever since I starting messing around with these settings I either have to go with the annoying
AME generated folders or one that I have to specify.
Did I remember wrong and I'm actually going daft?
Cheers
Gavin

Similar Messages

How to get rid of 802.1x 'Default Authentication'?

Hi All,
Everytime I close my MBP's lid, put it to sleep, or simply turn it on... My wifi is no longer connected.
this all started ever since I decided to 'Turn Off Wifi' the very first time since I got my MBP this year 2011, in June.
Whenever I do any of the above (put MBP to sleep etc) then get back to working.. My Safari says I'm not connected to the internet.
And I see my Wifi signal "blinking" and trying to connect. So I go to my Network preferences and see this:
There's that '802.1X: Default Authenticating' that appears below my wireless network's name..
After which i have to Disconnect from twice - 1 time, before it tries to "authenticate" again.. and then a 2nd time.. and then it stops completely,
Then i have to proceed to click and choose my network again and re-enter my password just to get the Airport/Wifi working again..
Someone please give me a solution to get my Wifi to automatically connect whenever I switch on my MBP - and to get rid of this annoying 802.1X which does nothing and just continues to try and "authenticate" with no result.
It would be very very much appreciated! Thank You!
PS. I did read somewhere online about 802.11g newer wirelss network cards and how they may have issues with an 802.1x network etc..
Don't really understand it though. Please explain if you could. Cheers

Realized that OSX Lion as re-prioritized my Wi-Fi to the bottom of the list.
What I had to do was place it in first priority again in Network settings.
Quite a disappointment from OSX Lion since in OS Snow Leopard that was the default setting - and certainly a hassle for newbie Mac users like myself who may be clueless when faced with these "issues"
Also attached above is the picture that for some strange reason disappeared in the original post..

How to get rid of PhotoShop as default

I use a different program as a default when I load pictures from my camera. Since I've installed PhotoShop Starter - it automatically pops up to download camara photos. My other program still downloads programs as well. I can't seem to find any options to make PhotoShop stop acting as the default. I use Windows XP. I don't want to uninstall the program, as I use it. I just don't want it as the default reader.

I had the same problem when I upgraded to Photoshop Album Starter Edition 3.0 and unfortunately lost the majority of the photos downloaded from my camera through them becoming 'Missing Files.' The photo's I 'lost' were never to be repeated events - my husbands last fishing trip with his Dad before his Dad passed away, a friends wedding and the birth of our Labrador pups. Luckily I realised there was a problem within 4 to 6 weeks of downloading the upgrade, otherwise I would've lost a lot more. The photos we've lost are heartbreaking enough!
I contacted Adobe by phone and even though they couldn't help me to locate my 'Missing File' photos, they were able to tell me how to turn their camera downloader off.
Follow these steps in order to stop Adobe from overiding your usual photo download programme:-
In the bottom right-hand corner of your screen (near the date) you will see a camera icon. Hover your mouse over it and it should say -Adobe Photo Downloader. Click on this icon and then click on Disable. Once you have done this the camera should come up with a red cross on it.
I hope this helps.

How to get rid of the weblogic.kernel.Default errors and warning?

Hi there,
When i'm running my application deployed on WLS8.1 SP3 and the application is running fine, but the following error and warnings were thrown.
2004-08-05 11:26:30,453 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] ERROR com.bea.wlw.runtime.core.util.Config - Failed to obtain connection to datasource=cgDataSource, using generic DB properties
<Aug 5, 2004 11:26:30 AM SGT> <Error> <WLW> <000000> <Failed to obtain connection to datasource=cgDataSource, using generic DB properties>
2004-08-05 11:27:12,281 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.default.elementattributes
2004-08-05 11:27:12,282 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.default.elementattributes', using defaults.
2004-08-05 11:27:12,308 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.system.groupIdCache.elementattributes
2004-08-05 11:27:12,308 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.system.groupIdCache.elementattributes', using defaults.
2004-08-05 11:27:12,386 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.region.CodeTableCache.elementattributes
2004-08-05 11:27:12,386 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.region.CodeTableCache.elementattributes', using defaults.
2004-08-05 11:27:13,527 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN com.bea.wlw.netui.script.el.NetUIReadVariableResolver - Could not create a ContextFactory for type "com.bea.netuix.servlets.script.PortalVariableResolver$PortalContextFactory" because the ContextFactory implementation class could not be found.
May i know why this is so? How to get rid of these error and warnings?
Thanks
Derek
Message was edited by derekchan at Aug 4, 2004 8:41 PM
Message was edited by derekchan at Aug 4, 2004 8:42 PM

you didnt seem to have configured the datasource / connection pool / database control with proper db properties
you should check your configuration to see if you have done it right and then you should check your application and the properties settings in the controls to ensure they are right.

How to get rid of the default playlists?

Hello! I'm using an iPhone 4S on iOS 8.3 and I went into iTunes on my desktop computer and removed the default playlists (90's Music, Recently Added, Recently Played, Top 25 Most Played) and for some reason they won't go away on my phone. Before today they weren't on there and must have added themselves after I synced my new music. The playlists are not on iTunes anymore and there is no way to remove them via my iPhone. Does anyone know how to get rid of them???

Type about:config in as URL
Then search for "yahoo" in the long list that you see. I found 3 references. Right click each one and "reset". That stopped my problem of yahoo search showing up in each new tab. I too got dumped on by a so called safe installer and ended up with unwanted programs.

I tried creating a new folder and quickly moving Newsstand into it, but Newsstand is grayed out, and could not be moved. Any other ideas how to get rid of it?

I tried creating a new folder and quickly move Newsstand into it, but it is grayed out and cannot be moved. Any other ideas how to get rid of it?

You cannot

How to get rid of Yahoo which has replaced itself as the search engine on safari . I have tried going to safari and changing the default search engine to google and the homepage to no avail can anyone PLEASE help

After updating Firefox . I notice Yahoo has taken over as the search engine on safari . I have gone into safari and changed the default browser and home page to google but yahoo is still there . Can someone Please tell me how to get rid of Yahoo . peter

Since I looked everywhere for this answer and never found it I decided I needed to help!
1. GO TO THE TOOL BAR WHERE IT SAYS SAFARI AND CLICK TO BRING DOWN THE MENU OF OPTIONS, CLICK ON PREFERENCES
2.INSTEAD OF JUST CLICKING ON THE GENERAL TAB AND CHANGING THE SEARCH ENGINE LIKE EVERY OTHER STUPID SUPPORT TELLS YOU TO DO LOOK AT THE TAB THAT SAYS EXTENSIONS.
3. Chances are you downloaded something that was made by a third party to "enhance" your web experience but really they just screwed you over, YOU CAN CHOOSE TO SIMPLY UNINSTALL ANY EXTENSIONS PUT ON YOUR COMPUTER BY CLICKING INSTALL, BUT TO BE SURE THAT THIS IS THE ROOT OF YOUR PROBLEM IN THE SECOND COLUMN SIMPLY CLICK ON THE UNDERLINED NAME OF WHO THE EXTENSION IS MADE BY IF CLICKING THE LINK BRINGS UP A YAHOO PAGE THIS IS THE SOURCE OF YOUR ISSUES AND SIMPLY UNINSTALLING THIS WILL RID YOU OF THIS DUMB PROBLEM!!
HOPE THIS HELPS!!!!

How can i get rid of other folder on ipad

how can i get rid of other folder on ipad

You can't remove the "other" section on your iPad, iTunes and the iOS need this folder to store data during syncing for example, damaged data and for all things, that you can't access on your device.
You can reduce the size by restoring, if the folder grows to more than 1GB due to problems when you sync or download apps or photos.

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so it goes to Default. thanks

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so all photos goes to Default or as shot. thanks

Go to the develop module and highlight all of the images in the filmstrip at the bottom of the screen. Then activate Auto-sync and click on the Reset button. That should reset all of the images to your camera default settings.

Since upgrading to 10.7.2 to use iCloud, i keep getting a message with ubd wants to use the login keychain, anyone for help to how to get rid of this...

since upgrading to 10.7.2 to use iCloud, i keep getting a window message with ubd wants to use the login keychain, i put the right password but it keeps coming back, anyone for help to how to get rid of this...

This is what I did and it seems to have worked so far. While that little annoying box is up you need to open the Keychain access by:
going to applications -> open utilities folder -> click to open Keychain Access
Now here is the stupid part, you have to continue to press the cancel button on the "ubd wants to use login keychain" box for the kaychain window to open. Once you have keychain access open go to:
the top of your monitor and select "Keychain Access" right next to the little apple logo -> click preferences in the options panel-> the preference box will open now -> click "Reset My Default Keychain" -> another box will pop up that says "Please enter your login password. This password will be used to create your new keychain" (of course this is assuming that you use a login password to access your mac) -> enter your login password and a box shows up that says "created a new empty 'Login' keychain"
After that you should be good to go. This new keychain you created with your login password overides the old keychain. The old keychain is still available in the Keychain's folder but is not being used and therefor can be deleted. All you have to do now is press ok, and your good. If the "ubd wants to use login keychain" box is still there after you reset your keychains just hit cancel and it should be gone for good or you can enter your login password.
Is this a fixall that will work forever? I have no idea but doing this has allowed me to access my network at work and all the servers I need to get to.
Oh and one more thing. You may need to press cancel on the ubd box throughout this entire process, I just gon in the habit of clicking a button hitting cancel on the ubd box and the new window would pop up.
I hope this helps you! Sorry if it's long, I was trying to be as detailed as possible to make it easier. Let me know how it goes.

How to get rid of reopen window box on shutdown

I want to have my Mac default to not opening windows previously opened and I want to get rid of the anoying default "reopen windows" box when I shut down. How do I do this?

A permanent replacement for the "Reopen windows when logging back in" checkbox is as follows:
1. Close all apps you don't want to open at startup.
2. Open your user Library folder. It is normally invisible, so press the Option key while selecting the "Go" menu in the Finder then select "Library" to open it.
3. Use the Get Info dialog "Locked" checkbox to lock this plist:
~/Library/Preferences/ByHost/com.apple.loginwindow.*.plist
where "~" is your home folder and "*" is a sequence of characters (12 in my case). No need to lock the corresponding lockfile.
This plist is where the System stores "reopen windows" info, so the System can't change/delete it if it is locked. This won't change the "Reopen windows..." checkbox setting, but that setting will no longer have any effect.

How to get rid of Safari !!!!!

I must have missed the message to install Safari during one of the many iTunes updates and now I'm stuck with it on my computer taking up 60GB of space! I've tried removing it through Control Panel -> Uninstall Programs, but get the message that I don't have administrator privilages - which I do. Thinking I may have had this installed while I was logged in under my main administrator name, I logged off and logged back in under my only other user name and tried again - same message. So I went to the Safari folder and changed all security privilages to full access for both accounts and it still won't uninstall. How can this program claim I don't have administrator privilages when I used the only two user accounts on my computer?? So in a fit of defiance and desperation, I deleted the Safari folder and then ran the name "safari" in Vista's search box under the Start menu (I even included the wildcard .* to catch all examples). Guess what? Rather than find all traces of safari on my computer so I could delete them manually, Safari started running again!! I cancelled the program before it finished loading and went to recheck the Program Files folder and Safari was back there with a full 60GB of files again! I CAN'T GET RID OF IT!!
Safari is a malicious software program as bad as any Malware or Adware I have ever seen! How can I get rid of it??
(and no, I really do not want Safari - I don't care if you think its the greatest thing since sliced bread - I make the choices on my computer, not some software engineer or marketing division and I DON'T WANT SAFARI!!)
Any suggestions on how to get rid of it? Did I miss something?
Thanks all,
LH

The Safari update is not clear what it is and provided no explanation of what it was - it simply states "Safari". For all I know it could have been an indexing file for iTunes. There was no explanation as to what is was and the install checkbox was already checked so the unsuspecting may quickly and accidentaly hit install along with the iTunes update, thinking it was a required part of iTunes. Regardless of how it got there, I'm trying to get rid of it and it won't uninstall.
Now you may fancy yourself as some kind of wunderkind software expert, but you apparently do not know Vista because it really does take up 60 GB and every time I delete it, it tries to reinstall itself. These are not multiple installations and I am the only user on this computer. You haven't offered me any help - only insults. If you aren't willing or able to offer help or assistance in the most sincerest form this request was intended, than stay out of this thread. Your actions and insults reinforce the prevailing belief that Apple users are unkind, rude, self-important snobs.

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

How to get rid of title bar of a quicktime window?

The main problem:
I want to display the title info etc about each track as they play in iTunes. How can I do that on an otherwise black screen (desktop) (I don't want to use the visualizer with its psychedelic patterns).
Background:
I want to play music from iTunes (many pieces in a row - for like a full day). While this is happening I want the title etc of the tune to be displayed on the screen, like white smallish text against a black background in the lower right hand corner. At the same time I want slides to be displayed on the screen.
So, with iPhoto I can run a slide show but only while one piece of music is playing.
Instead I can have the desktop slowly change (from system preferences) with images from a folder every 5 seconds. That's not too bad. Looks good, actually, except for that annoying menu bar at the top! Well, black tape can hide that one (or a second display and move it over there). Now iTunes can play away all day.
As to how to get the title etc of the song playing displayed I was thinking about somehow extracting it from iTunes with applescript, then paste it into the text track of a quicktime movie, and display that little movie in a small window. I have figured out how to get rid of the controller from the window. But, I can not figure out how to get the title bar of the quicktime window to go away - that is I want a window with nothing around it, neither controllers nor title bar nor anything. How do I create such a window. Any good ideas out there?
Or is there a totally different way of obtaining the same effect?
Thanks.
G4 Mac OS X (10.4.8)

Hi,
You could try posting at the QuickTime discussion area. There might be an iTunes visualizer that allows you to make a slideshow with track info. It has been a while since I tried making a SMIL file, but I think you could do what you want with that. Not sure how you create a streaming text of track information. I would have to do some reviewing.
gl,

How to get rid of the "time out" when using DAQ AI in the example program

I try an example file called "AcqVoltageSamples_IntClkDigRef" (Visual C++ .NET). It works great. However, if the program has not recieved the data, it sent out a timeout message. How to get rid of the "time out"? I cannot find anywhere in the code. Is this a property I have to reset somewhere else?
Thank you,
Yajai.

Hello Yajai,
The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
I hope this help. Let me know if you have any further questions.
Regards,
Sean C.
Attachments:
SetTimeout.bmp ‏2305 KB

How to get rid of AME folder defaults

Similar Messages

Maybe you are looking for