How to get select statment in debug mode

hi all
i make debug in forms 10g and in debug mode and in a specified point , i want to see tha last select statment in debuger
thanks

in the debug-console, show globals and system-variables (second icon from the right), open the tab system and check the value of "last_query"

Similar Messages

How to get selected value from selectOneRadio ???

Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
Plzzzzzzzz i need help

You have a datatable in which each row is a question, correct?
Also in each row you have 5 possible answers that are in a radio, correct?
So,
You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
ex:
<h:selectOneRadio value="#{notas.selectedString}" id="rb">
<f:selectItem itemValue="#{notas.valuesList}"/>
</h:selectOneRadio>
Search the web for examples like yours.

How to get selected value from OADefaultListBean.

Hi All,
How to get selected value from OADefaultListBean ?
Thanks,

Hi,
To identify the user's selection(s) when the page is submitted, you would add the following logic to your processFormRequest() method:
OADefaultListBean list =
(OADefaultListBean)webBean.findChildRecursive("positionsList");
String name = list.getName();
String[] selectedValues = pageContext.getParameterValues(name);
To retrieve all the values in the list box, call list.getOptionsData().
--Prasanna

How to get selected row index of a Table ?

hi gurus,I'm new to Webdynpro for abap
I'm displaying just Flight details in a Table so
how to get selected row index of a Table and need to be display in Message manager.

Hi,
For getting the row index use the following code.
DATA lo_nd_node TYPE REF TO if_wd_context_node.
DATA lo_el_node TYPE REF TO if_wd_context_element.
DATA index TYPE i.
* navigate from <CONTEXT> to <NODE> via lead selection
lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_node ).
lo_el_node = lo_nd_node->get_lead_selection( ).
index = lo_el_node->get_index( ).
node is the name of the node which is binded to the table.
For printing the message u can use code wizard.
Press ctrl-F7. Now Select generate message.
IN this select the method REPORT_SUCCESS
In the code now u can give index to Message text Exporting parameter. Comment receiving parameter.
Write the whole code in onLeadSelect of the table.
Regards,
Pankaj Aggarwal

How to get selected row keys from RichSelectManyCheckbox

Adf Table has getSelectedRowKeys but SelectManyChekcbox does not has anything similar. Can you tell me how to get selected row keys programmatically for RichSelectManyCheckbox?

Hi User,
selectManyCheckbox component's value property holds the selected items values. Bind this property to some bean variable(of type list) so that you can get the selected values by accessing the bean property.
Sireesha

How to get out of full screen mode in Firefox 4?

How to get out of "Full Screen Mode" in firefox 4 ?

Pressing the F11 should do it.

How to get transacted session in direct mode with jmsra adapter

Hi,
I use MQ 4.4u1 release with GF in EMBEDDED mode. I configured several connection factories with NoTransaction/LocalTransaction/XATransaction support. In my app I get a connection factory from JNDI tree, create connection/session/producer and send several messages to queue. Everything works fine when I don't use transactions. But, when I want to send messages in one transaction, the connection always provided to me non-transacted session. The session created via
Session session = connection.createSession(true, Session.SESSION_TRANSACTED);
request. I check the session transacted state and acknowledge mode right after i get it:
log.fine("Session: " + session + "; transacted: " + session.getTransacted() + "; ackMode: " + session.getAcknowledgeMode());
The log shows me that the session is not transacted and ackMode is 0 (DUPS_OK_ACKNOWLEDGE). If I try to commit the session after messages were sent I get the correct exception:
javax.jms.IllegalStateException: MQJMSRA_DS4001: commit():Illegal for a non-transacted Session:sessionId=3361979872663370240
Does anyone know how to get transactional session in direct mode?
Thanks, Denis.

I mentioned LOCAL because I misread your post and thought you were suggesting that LOCAL mode behaved differently.
If you want to send messages in a transaction from within a Servlet then I think you're expected to use a UserTransaction: Here's an example that worked for me:
        Connection connection = outboundConnectionFactory.createConnection();
        Session session = connection.createSession(true, Session.SESSION_TRANSACTED);
        userTransaction.begin();
        MessageProducer producer = session.createProducer(outboundQueue);
        int numberOfMessages = 10;
        for (int i = 0; i<numberOfMessages; i++) {
            Message message = session.createTextMessage("Hello world");
            producer.send(message);
        userTransaction.commit();
        connection.close();I obtained the UserTransaction with this resource declaration:
    @Resource(name = "java:comp/UserTransaction")
    private UserTransaction userTransaction;The EJB spec explicitly states that local transactions aren't supported in EJBs; I haven't found such an explicit statement for Servlets but suspect that JMSRA is taking the same approach.
As for imq.jmsra.direct.disableCM property - this appears to disable connection pooling and from your post changes other behaviour as well. How did you find out about it (other than by examining the code)? As far as I can see this is not a documented feature and is not necessarily tested or supported.

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

How to run trigger/procedure into debug mode

Hi,
I have created trigger. i would like to run this into debug mode. Please suggest that how to do through sqldeveloper or sql command prompt.
Regards,
Venkat

- install PL/SQL developer (trial available at www.allroundautomations.com)
- connect to your DB
- in the tree on your left right click your trigger and select "Add debug information"
- open a new test window (file - new - test window)
- -- Created on 20-2-2012 by RMARTENS
declare
-- Local variables here
i integer;
begin
-- Test statements here
insert into table (col1, col2) values ('cal1', 'val2');
end;- now click the "Start debugger" button and you'll be able to step into all the steps.
- the idea is that you do a "step into" on your insert statement (which offcourse you need to alter according to your table)
good luck!
Regards,
Richard
blog: http://blog.warp11.nl
twitter: @rhjmartens
If this question is answered, please mark the thread as closed and assign points where earned..
Edited by: rima on 20-feb-2012 11:37

How to get selected values from selectManyCheckbox ?

Hi,
I am a SOA developer and using 'Auto generated adf form' of Human Task. I did some customization in the form. I need to show one dynamic list (contains multiple string values) on a form, from which user will select desired values. For this I have used <af:selectManyCheckbox> adf component.
It has generated code as follows...
<af:selectManyCheckbox value="#{bindings.Response.inputValue}"
                                         label="#{bindings.Response.label}"
                                         id="smc1">
                    <f:selectItems value="#{bindings.Response.items}" id="si9"/>
</af:selectManyCheckbox>
I am able to show list on a form and can select multiple values also.
Now, I want the multiple selected values back in my BPEL process. I need only those values which are selected by user.
Currently I am getting complete list as it is back in BPEL process.
Please help me out..!
Thanks..
Suraj

Unwinding ADF: How to retrieve Selected Items from selectManyCheckbox using ValueChnageListener

How to get selected values from tableSelectMany

Hi all,
I have a view object which displays all column names of a table. I created a tableselectmany table with the view object.
the user has to select some rows (for mining function).
how to get the selected rows from tableselectmany table?
what should be in 'action' and 'actionlistener' ?
thanks in advance.

test(Set<Key> empKeys){
System.out.println("Inside function");
for(Key keys:empKeys){
Row[] row = getCollectionsView1().findByKey(keys,1);
EewCollectionsViewRowImpl vo = (CollectionsViewRowImpl)row[0];
In the action just call this method(test)
and pass the argument as #{applicationScope.managedBean.firstProperty.selectionState.keySet}
I hope this works for you.

How to get selected values from Select Many Choice List

Hello All -
I am using Select Many Choice List and wish to get the selected values in the bean. I have created method binding for valueChangeListener for the choice list, but not sure how to get the selected values.
I am facing problem in getting values from valueChangeEvent.getNewValue(). For Select One Choice List this returns int, but some list type object for Select Many Choice List.
When I try to print the value it comes something like:
ArrayList newVal = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
System.out.println(newVal);
[Ljava.lang.Integer;@870ad8
Could anyone please suggest how to type cast and use the return of valueChangeEvent.getNewValue() to get the selected values.
Regards -
Rohit

Hi Timo -
Thanks for the suggestion. I could get the values as below:
public void multiOpUnitValChange(ValueChangeEvent valueChangeEvent) {
// Add event code here...
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding opUnitIter = (DCIteratorBinding)bindings.get("OperatingUnit2VOIterator");
Integer[] values = (Integer[])valueChangeEvent.getNewValue();
for (int i=0; i<values.length; i++){
Row row = opUnitIter.getRowAtRangeIndex(i);
System.out.println(row.getAttribute("OpUnitId"));
Thanks -
Rohit

How to get selected value from one choice list

Hi All,
i want to get selected value in onechoice list.how to achive this
Regards,
Smaran

check these
http://groundside.com/blog/DuncanMills.php?title=adf_the_list_binding_value_problem&more=1&c=1&tb=1&pb=1
http://blogs.oracle.com/jdevotnharvest/2010/12/reading_the_selected_value_of_an_adf_bound_select_list_in_java.html
http://www.oracle.com/technetwork/developer-tools/jdev/listbindingvalue-088449.html

Dvt:pivotFilterBar - how to get selected values from filter

Hi all,
I have a question: how to programmatically get selected values from pivot table's filter bar?
I have tried to use
pivotTable.getDataModel().getDataAccess().getValueQDR(startRow, startCol, DataAccess.QDR_WITH_PAGE);but for page edge dimensions it returns BAD DATA, it seems that it returns some cached values.
Environment: JDev 11.1.1.3.0 without any patches.
thanks,
Miroslaw

Hi,
You can retrieve the selected value in the PivotFilterBar through the model of PivotFilterBar, instead of dataaccess:
// get the model from the pivot filter bar instance
QueryDescriptior queryDescriptor = (QueryDescriptor)pivotFilterBar.getValue();
// retrieve a list of criterion, each one is used to populate each lov within the pivot filter bar
ConjunctionCriterion conjunctionCriterion = queryDescriptor.getConjunctionCriterion();
List<Criterion> criterionList = conjunctionCriterion.getCriterionList();
for (int i=0; i<_criterionList.size(); i++) {
AttributeCriterion criterion = (AttributeCriterion)criterionList.get(i);
// _selected is the currently selected value
Object selected = criterion.getValues().get(0);
System.out.println(_selected);
Hope that helps,
Chadwick

EVS - how to get selected values back into model?

Hi all!
I am new to WebDynpro but Ive got a closer look to the tutorials but since I didnt found a hint for my problem I try it this way! The situation is the following:
I am using selector fields to support the user with some constants to choose from but it is still possible to enter the data directly into the input field.
I followed the tutorial for this purpose with the difference that I initialized the selector fields with data coming from the model. This happens in the wdDoInit() of the view controller.
The problem is how to get the selected value back into the model without forcing the user to use the F4-Help or trigger a onEnter event on the input field.
Due to the modification of the data type at runtime I cant bind the attribute of the view context holding the selected value to another one of a custom controller context.
I hope there is a simple solution because I am just asking for a common functionality on a web site.
Thanks in advance!
Frank

Reiner,
I cannot fully understand your requirements, but probably my solution described in blog post <a href="/people/valery.silaev/blog/2006/03/10/minus-evs-plus-ovs-value-help-smart-input">Minus EVS, Plus OVS == value help + "smart" input</a> will help you.
My idea was to use OVS instead of EVS with pair of calculated "proxy" attribute and real attribute. Real attribute has enumeration, proxy attribute used for input. In my solution real attribute is always synchronized with proxy attribute...
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

How to get select statment in debug mode

Similar Messages

Maybe you are looking for