How to get the change document Number.

Hi,
We have a scenario where the any customer master changes need to be send to the agent. I thought of using CDHDR,CDPOS.I've checked the FMS CHANGEDOCUMENT_READ and position header FMS too.even for these we need to provide the object class.
But for them we need to have the document number and object class. They can be changed from any transactions. We have many Z transactions through which he can change the customer master data too,but finally master tables only get updated. Is there any FM to find the document numbers.
Thanks,
Bharathi.

Hi Bharti,
In such situation, you can create the event based on the CDHDR table entries. In fact, based on the object ID and object class, the recent change document can be picked up. If standard change object does not work, a Z change document can be created. This practice can help in picking the change in selected fields as the master tables can be updated in many fields which are not relevant for the requirement.
Do let me know in case you need more help on it.
Thanks,
Jyoti

Similar Messages

  • How to get the Change Document Header details for a given date

    Hi All,
    Can anyone help me on this Change Document Header details(CDHDR).
    Better way to pull the information of Change Document Header details(CDHDR). No Index is maintained for the tables.
    So please suggest better Optimising techniques to get the Change Document Header details(CDHDR).
    Using this Function module : CHANGEDOCUMENT_READ_HEADERS how to import the DATE_OF_CHANGE.
    Thanks in advance
    Regards
    Chakri

    HI,
    Go through the documenattion of the FM u can get the details.. and also where used list
    Regards,
    Nagaraj

  • How to get the Material-Document-Number wie the delivery-Number+Position???

    Hi,
    we want to connect mseg and likp+lips.
    But therefore we need the Material-Document-number concerning this
    delivery and in likp+lips isn't a Material-Document-Number!
    Could anybody help me to connect likp+lips with mseg!

    ok, NICE!!! But how should I get with these information a unique Material-Document-Number for a delivery+deliveryposition?

  • How to get the final document number?

    Hi,
    How do I retrieve the document number of a document (e.g. delivery note) that is just added?
    Currently, I use the following event listener:
    [B1Listener(BoEventTypes.et_FORM_DATA_ADD, false)]
    in which I retrieve the document number by reading out the text field on the form:
    EditText text = (EditText)form.Items.Item("8").Specific;
    string deliveryNoteNumber = text.Value;
    This works perfect if only one person is adding documents.  But if two persons are posting a document, they both see the same (temporary) document number in the form while entering the data.  The latest person who finalizes his document, will get another number than the one that was displayed in the form (because the first person already used that number).  So, how can I retrieve the number of a document that is just finalized?
    Thank you very much for your help.
    Regards,
    Pieter Verhaeghe

    You can use the "ObjectKey" property of the BusinessObjectInfo object returned by the form_data_add.
    Catcth the event with BeforeAction = false - after the add event has successfully happened. Then you will see the ObjectKey property of the BusinessObjectInfo object will have an XML string in it. Inside that XML you can find the DocEntry of the newly added document, you will just need to parse it properly!

  • How to get the current month number

    Hi everyone,
    Does anybody know how to get the current month number in Oracle Discoverer Worksheet calculation?
    I try to use EUL_DATE_TRUNC(CURRENT_DATE, 'MM'), but instead I got 01-AUG-00.
    If I change the data display format to MM, it will give me "08" but if I use TO_NUMBER function to convert it to number I get error "invalid number"
    Is there anyway to get the current month value in number? Thanks

    Scott,
    Thank you so much! It works perfectly! :)
    Hope you have a great day ahead!
    Cheers,
    Angeline

  • How to get the Change node in Production Server!!!!!

    Hi Guys,
    Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
    Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
    Regards
    Ansuman Mohanty.

    Hi Mr!
    If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
    Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
    Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
    All the best:-)
    Kind Regards,
    Saisree.S

  • How to get the unoccupied material number in a number range

    How to get the unoccupied material number in a number range.for example, I wang to get a number between 1500000 and 1599990 which is unoccupied as my material number to be created. Is ther any FM or codes?

    Dear,
    You can get this information from Tcode SNUM or you can access database table NRIV.

  • How to get the 4 digit number associated with a SAP icon ( ICON_MAIL )

    Hi Friends,
                   Could anyone please tell me how to get the 4 digit number associated with a SAP icon ( ICON_MAIL ).
                   eg: - For ICON_GREEN_LIGHT the four digit id code is '@08@' (which you can get from ICON table )and the associated 4 digit number is'1003'.
                  Similarly I want to get the 4 digit number for ICON_MAIL(e-mail icon)
    <b><REMOVED BY MODERATOR></b>
    Ashiq
    Message was edited by:
            Alvaro Tejada Galindo

    You can use this report...It's not mine...
    REPORT zdummy_atg_2.
    TABLES: ICON.
    INCLUDE <ICON>.
    FIELD-SYMBOLS: <F>.
    SELECT * FROM ICON.
       ASSIGN (ICON-NAME) TO <F>.
       WRITE:   /(5) <F>, 20 '@',21 ICON-ID+1(2),23 '@',ICON-OLENG,
                ICON-BUTTON,ICON-STATUS,ICON-MESSAGE,ICON-FUNCTION,
                ICON-NAME.
    ENDSELECT.
    Greetings,
    Blag.

  • How to create the change document functionality for a dependent objects?

    May I please know how to create the change document functionality for a dependent objects?
    I have done it follow the same process as for business process objects. But when i try to test it in BOBT, there is no records under "FIELD_CHANGE_WITH_FILTER". It seems the change hasn't been recorded.
    If the way I did to create change document for dependent object is correct, please also kindly advise the possibilities for why there is no record during testing.
    thanks in advance.

    I also have some doubts about the business object.In this case,one abstract BO hase a subnode wihich is root extended.I added the change document for this node under the category "root_extended" and then tested the function in BOBT.I got some error message "can't find the root key".Shall i redefine the method /BOFU/IF_CDO_CREATION~IS_CDO_CREATION_ACTIVE so as to solve the problem?
    Thx.

  • Confition type FRC1- how to get the change log,

    Hi,
    When  the condition type FRC1 automatically gets deleted (deletion flag),. and we are not able to see the change log for the same.
    how the Conditions are deleted. Or if at all any one has deleted, how to get the change log,

    Check in
    m/06
    go to utilities
    change log
    If not found  consult BASIS consultant

  • How to get the changes during ABENDED replicat process

    Hi,
    I am working on Oracle GG bi-directional DML replication. I m stuck in one place.
    My target replicat process was ABENDED due to Error :- ORA-01403: no data found. I restarted my replicat process again by runing the below command
    GGSCI (db1) 30> alter replicat rep2 begin now
    GGSCI (db1) 30> start replicat rep2
    After restart the replicat process I can't see the changes on target server which I had applyed on source server during target replicat was ABENED.
    My doubt is.
    1. Is my command is correct for start the ABENDEND replicat process?
    2.How to get the changes on target server which applyed on source during ABNDED of targer replication?
    3.How to avoid the ABENDED replicat process on production server?
    4.how to track the ABENDED process in production server?
    Please HELP:(
    Edited by: NaveenK on Aug 29, 2012 3:32 AM

    NaveenK wrote:
    Hi,
    I am working on Oracle GG bi-directional DML replication. I m stuck in one place.
    My target replicat process was ABENDED due to Error :- ORA-01403: no data found. I restarted my replicat process again by runing the below command
    GGSCI (db1) 30> alter replicat rep2 begin now
    GGSCI (db1) 30> start replicat rep2
    After restart the replicat process I can't see the changes on target server which I had applyed on source server during target replicat was ABENED.
    My doubt is.
    1. Is my command is correct for start the ABENDEND replicat process?
    2.How to get the changes on target server which applyed on source during ABNDED of targer replication?
    3.How to avoid the ABENDED replicat process on production server?
    4.how to track the ABENDED process in production server?
    Please HELP:(
    Edited by: NaveenK on Aug 29, 2012 3:32 AMHi Naveen. SQL Error 1403 means row not found. Your data is out of sync and you should fix this.
    By doing begin now when this happens, you are skipping all the transactions that were "in-line" since the process ABENDED.
    You have more than one way to deal with these things, first of all you should synchronize your data! This should get rid of the 1403 errors.
    Then you can write rules using REPERROR to tell the replicat how to behave in case of errors should come up.
    Using logdump, you can read the exact row which failed and find out the next RBA to skip that specific one if required. You should also configure a DISCARDFILE to get details about errors when they happen.
    Greetings,
    N K

  • How to get the iphone serial number  in application?

    hello,  everyone
       i  really want to konw how to get the iphone serial number in aplication ?  As it's different from uniqueIdentifier ....
    thank you

    Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
    and it is a good idea to install STB on your machines.
    If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
    I believe that on this platform, sneep gets the serial from the output of prtconf.
    There is a minor correction to be made :
    After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
    man -M /opt/SUNWsneep/man sneep
    with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
    that you will find on the physical serial tag.
    The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

  • How can I get the sales document number in CRM??

    Hello,everybody
    I want to create a document flow report in CRM.
    But I donnot know how to get the documen id which is in ERP (for example: Sales, Billing)
    Is there anyone who can give me some advice?
    Thanks.

    Do you have ERP documents in CRM ? I mean does ERP documents are getting replicated in CRM? or you want transaction no from ERP only ? Which version are you working on?
    Thanks,
    Nitin

  • How to findout the clearning document number based on the reference

    Hi all
    we  need to findout the clearning document number based on the reference number in financial transaction code.
    basically we know how to retrieve the data from table level using BKPF without non primary key as XBLNR but
    we  want to know is this any function module to retrieve the document number based on the reference number like XBLNR.
    Please confirm.
    Thanks
    K.Gunasekar

    you can get it from BSAD too. but again its not a primary key

  • How to populate the sales document number in FD10N or FBL5N report

    Hi Gurus,
    In the reports FBL5N and FD10N i am able to see the Billing document field(VBELN) populated with the number but The sales document number (AUBEL) is not populated with the number.
    How to get this number updated to the FBL5N or FD10N report.
    Thanks in advance.

    Hai
    Goto Settings Special Fields and add the required fields and save and come back and exceute again.
    Regards
    Raghavendra.M
    SAP-Practice

Maybe you are looking for

  • How to get main class name in running program?

    How can I get classname, which main method is executed? Of course in running program? Please help, Chris

  • Snow leopard and cd-r issues

    I have been trying to burn some songs from iTunes to a CD-R.  I have a large pkg of these that I had no issue with before but neither my iMac or my MBP are accepting these now.  I know the drive is fine and the info is not corrupted as I burned the i

  • Webservice date format

    I have used "clientgen" Ant task to generate the client library. The WSDL indicates that certain fields are of type xsd:date. The web service client sends sends "2009-08-04T13:55:46.237-04:00". However, the server expects "2009-08-04". In the WSDL fi

  • I yest bay a ipod shuffle and ido not know how to set it up

    i need help to set up my ipod

  • BPEL Assign activityafter copying data, loosing namespace

    Hello Guys, in BPEL, using assign activity to copyList data from one payload to another payload, when i look the audit trail, namespace are missing, take an example. input: <inputVariable> <part  name="payload"> <ns1:personsElement  manager="Manager