How to get the entire result into an XMLDocument??

Hello,
I would like to get the result of a DB Query as XMLDocument. Here's the code I use:
ResultSet rset = stmt.executeQuery();
OracleResultSet orset = (OracleResultSet) rset;
while (orset.next()) {
XMLType poxml = XMLType.createXML(orset.getOPAQUE(1));
Document doc = poxml.getDOM();
The problem is, that I can only get a XMLDocument per table row, but not an XMLDocument of the entire result.
Regards,
Dominik

I got the answer myself:
In the xsql-query, use the xmlagg() function to group the all records into one record.
Use the same Java code.
Regards,
Dominik

Similar Messages

How to get the fixed result in a DES/CBC mode with fixed input data and fix

How to get the fixed result in a DES/CBC mode with fixed input data and fixed key. Below is my program , I tried to get the checksum of the DESInputData with the DESKeyData, but each time the result is different.
below is my code:
byte[] DESKeyData = {(byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01, (byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01 };
byte[] DESInputData = {(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31,(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31 };
SecretKeySpec skey = new SecretKeySpec( DESKeyData, "DES" );
Cipher cipher = Cipher.getInstance("DES/CBC/NoPadding");
cipher.init( Cipher.ENCRYPT_MODE, skey );
byte[] result = cipher.doFinal( DESInputData );

Use class javax.crypto.spec.IvParameterSpec to specify IV for CBC mode cipher:
// Create CBC-mode triple-DES cipher.
Cipher c = Cipher.getInstance("DESede/CBC/PKCS5Padding");
// Specify IV.
IvParameterSpec iv = new IvParameterSpec(new byte[] { (byte)0x01, (byte)0x23, (byte)0x45, (byte)0x67, (byte)0x89, (byte)0xAB, (byte)0xCD, (byte)0xEF });
// Initialize cipher with proper IV.
c.init(Cipher.ENCRYPT_MODE, yourKey, iv);
// Encrypt and decrypt should work ok now.
For more info about cryptography, search the Internet for IntroToCrypto.pdf from mr. Phil Zimmerman. This document is also part of PGP (http://www.pgp.com).
An excellent book is 'Applied Cryptography' from Bruce Schneier (http://www.counterpane.com/applied.html).
Regards,
Ronald Maas

How to get the query result of improvement (Before and After ) using sql de

how to get the query result of improvement (Before and After ) using sql developer.

Check
http://www.oracle.com/technetwork/articles/sql/exploring-sql-developer-1637307.html

How to get the full result of a google search?

How to get the full results of a google search?
Nov 23, 2006 2:28 AM
Hi, Friends,
I want to build a URL collector as a seamless and integrated part of my desktop application in java language which can access the full search results of google, but i am not sure the right way? what is the best way to do that in java?
Where to find the relevant materials for the problem?
thanks a lot

Cross post - http://forum.java.sun.com/thread.jspa?threadID=788627&messageID=4481369#4481369

How to get the entire database from remote server to my server

Hi,
I am running a web application with sample data. Now i need to access the original data through this application. But the original data is located in the other server which is located in Mumbai.
Now i need the copy of that database to my system(Chennai). with minimum effort.
It is very urgent...
Thanks in advance...
Chaitanya.

Hi
Nicolas is right. You can also take advantage of exp/imp utility. That would not only get the entire db in one file but also the size will be a fraction of the entire db size.You can search for DataPump (that uses expdp and impdp) utility to expedite the export/import process.
For simple exp/imp you can do the following.
From Remote site(MUMBAI) issue
ORACLE_HOME\BIN\exp file=c:\fulldbexp09sept05.dmp log=c:\fulldbexp09sept05log.log FULL=Y userid=system/pwd@connectstringOfyourdb
Get a copy of fulldbexp09sept05.dmp and place it on your local drive in Chennai
On Local Site (Chennai)
ORACLE_HOME\BIN\imp file=fulldbexp09sept05.dmp log=fulldbimp09sept05 FULL=Y userid=system/pwd@connectstringOfyourlocaldb
By this you can take advantage of having a different db name on remote and local sites. This is a fairly easy exercise. You just need to be sure that in your TNSNAMES.ORA you have correctly defined the connectString for your db.
PS: Create a database on local server with default settings.
Make use of following to create appropriate tablespaces and users if you desire ie.
1. On Remote Site open SQLPLUS session and issue this command to find out the tablespaces, datafiles and their sizes
SQL>SELECT SUBSTR(file_name,1,60) FILE_NAME, tablespace_name, bytes
FROM dba_data_files
GROUP BY tablespace_name, file_name;
Now create the tablespaces on local sites using the result of the above query.
2. On Remote Site open SQLPLUS session and issue this command to spool user creation script.
SQL>spool c:\createuserscript.lst
SQL> SELECT 'CREATE USER ||' IDENTIFIED BY VALUES '||'"'||PASSWORD||'"'||' DEFAULT TABLESPACE '||DEFAULT_TABLESPACE||' TEMPORARY TABLESPACE '||TEMPORARY_TABLESPACE||';'
FROM dba_users
WHERE username NOT IN ('SYS','SYSTEM')
ORDER BY username;
SQL>spool off
Now edit this createuserscript using any editor and replace " with '. Copy this file to the local server and run it using @. This will create appropriate users.
Let me know if you have any problems.
Regards
Adnan Mashhadi
Nicolas I am not sure as how to eliminate the " in my script. Any comment will be appreciated.

How to get the section value into configurator developer page

Hi,
I am working on configurator developer, Can I get the section value into the configurator developer page by any setup. If possible means please help me on that.
Thanks advance,
Gopi

I thought the same.Thanks for confirming...I tried with loop approach.but i am unable to get decimal part...
eg if my values are 12.25 and 123.12....my below code ignores decimal points..i know since i am using Number, it is happening..but could you please let me know how can i get decimal values also..
OAViewObject vo = (OAViewObject) am.findViewObject("XXXXInvDistributionsVO1");
vo.first();
Number grossamount = 0;
for (int i=0;i< vo.getRowCount();i++) {
// BigDecimal grossamount1 = new BigDecimal((vo.getRowAtRangeIndex(i).getAttribute("Amount")));
grossamount = ((oracle.jbo.domain.Number)vo.getRowAtRangeIndex(i).getAttribute("Amount")).intValue();
System.out.println("grossamount "+grossamount); // it ignores and prints decimal points
BigDecimal grossamount1 = new BigDecimal(grossamount.intValue());
System.out.println("grossamount1 "+grossamount1); // it ignores and prints decimal points
vo.next();
Thanks
Raj

How to get the tag name into javascript

Hi,
Is there any way to get the tag name into java script when user clicks on.
For eg: if i use netui:anchor tag, how can I pass the tag id to the javascript when user clicks on the link using onClick attribute. This tag id needs to be evaluated at run time.
Ex code is given below.
function fun1(){
// how to get the tag name;
<%
String st="hai";
%>
<netui:anchor action="x" onClick="fun1()" tagId="<%=st%>>
I want to get this tagId (st) to the java script function fun1() when user clicks on this link. How can I do that. can you please help in this issue.
Thanks,
Satish.

Hi,
You can set the java variable as a js variable at run time:
<script>
var anchorName = <%=getNetuiTagName%>;
function fun1()
var anchorID = getNetuiTagName(anchorName);
alert(anchorID);// this will show the rendered ID for the anchor specified
</script>
this works because the jsp variable will be rendered before the js.
Thanks,
Steve

How to get the best results using the refine edge tool?

how to use the sliders in the refine edge tool? how do you get the best results using the fine edge tool?

You should ask in the forum for the (un-named) program you are using
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How to get the record set into array?

Hi,
I want to get the record set into array in the procedure and do the processing of the array later in procedure.
below is the stored procedure i am working on:
procedure bulk_delete_group(p_group_id in Array_GroupListID) as
begin
for i in p_group_id.first..p_group_id.last loop
--Here I have to get the list of user id before deleting group
SELECT user_id into *<SOME ARRAY>* FROM group_members WHERE group_id = p_group_id(i);
DELETE group WHERE group_id = p_group_id(i);
--Process the user id array after group deletion..
end loop;
end bulk_delete_group;
Thanks in advance
Aditya

Something like this ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.20
satyaki>
satyaki>
satyaki>select * from emp;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      9999 SATYAKI    SLS             7698 02-NOV-08      55000       3455         10
      7777 SOURAV     SLS                  14-SEP-08      45000       3400         10
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-81       4450                    10
      7788 SCOTT      ANALYST         7566 19-APR-87       3000                    20
      7839 KING       PRESIDENT            17-NOV-81       7000                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
13 rows selected.
Elapsed: 00:00:02.37
satyaki>
satyaki>create type np is table of number;
2 /
Type created.
Elapsed: 00:00:03.32
satyaki>
satyaki>Create or Replace Procedure myProc(myArray np)
2 is
3    i   number(10);
4    rec emp%rowtype;
5 Begin
6    for i in 1..myArray.count
7    loop
8      select *
9      into rec
10      from emp
11      where empno = myArray(i);
12
13      dbms_output.put_line('Employee No:'||rec.empno||' Name:'||rec.ename);
14    end loop;
15 End myProc;
16 /
Procedure created.
Elapsed: 00:00:00.88
satyaki>
satyaki>
satyaki>declare
2    v np:=np(9999,7777);
3 begin
4    myProc(v);
5 end;
6 /
Employee No:9999 Name:SATYAKI
Employee No:7777 Name:SOURAV
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.30
satyaki>Regards.
Satyaki De.

How to get the Overall result and Avg in Query

Hi
I am facing a problem to find Overall result and Avg for the keyfigure.
Here is the scenario.
I have a fiscalperiod ,qty in query column and material in row, when user enters the fiscalperiod(004.2006 to 006.2006)
the output should come as
   0406 0506 0606 Avg
M1 10 20   40     35
M2 20 40   30     45
res 30 60 70
i can able to get the overall result not avg,
if i change the properities of keyfigure 'Calicuate Result as 'Average of all values'',then i am loosing the overall result.
eitherway i can able to get one result,not both.
anybody can help.
Thanks
Madhu

You have 2 key figures and you have put Material in the ROWS.
Remove Material from ROWS and instead use 0FISCYEAR in the row selection.
You can create 12 Key figures for each month and use either Filer or Free Characteristic using 0CALMONTH to restrict the month for the selection Variable.
For the Key Figures use "Calculate Single Value as" Average.
Create another formula as KF1KF2....+KF12 to get the sum of average.
Regs
Gopi
Assign points if it helps...

How to get the entire trace with dbms_utility.format_error_backtrace

Hi,
I made 35 procedures where test35 is
calling test34 and test34 is calling test33 etc.
division-by-zero is in test1 and format_error_backtrace shows the trace up to test31.
Just curious, is it possible to get the entire trace?
Thanks
An example
SQL> BEGIN
2 EXECUTE IMMEDIATE 'create or replace procedure test1 as a number; begin a:=1/0; end;';
3 FOR i IN 2..35 LOOP
4   execute immediate 'create or replace procedure test'||i||' as begin test'||(i-1)||'; end;';
5 END LOOP;
6 END;
7 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2    test35;
3 EXCEPTION WHEN OTHERS THEN
4   dbms_output.put_line(dbms_utility.format_error_backtrace);
5 END;
6 /
ORA-06512: at "ANTS.TEST1", line 1
ORA-06512: at "ANTS.TEST2", line 1
ORA-06512: at "ANTS.TEST30", line 1
ORA-06512: at
"ANTS.TEST31", line 1
ORA-06512: at line 2

Out of interest, do you get any further back if each error message is shorter (e.g. a shorter procedure name)? From a quick test, SQLERRM is limited to 510 characters (doubtless documented somewhere though I can't find it just now) - the documentation says FORMAT_ERROR_BACKTRACE is not subject to the same size limitation, but that doesn't mean there is no size limitation.

How To Get The Smart Form Into The PDF File

Hello Friends,
Can Any One Tell How To Get Smart Form in PDF.
I used this RSTXPDFT4 Program.
It is asking The Spool Number.
How to get the Spool Number.

the steps are
SmartForms Output to PDF
There is a way to download smartform in PDF format.
Please do the following:
1. Print the smartform to the spool.
2. Note the spool number.
3. Download a PDF file (Acrobat Reader) version of the spool by running Program RSTXPDFT4 and entering the
noted spool number.
how to get spool number
The simplest method is to read the spool table directly, table TSP01
example code
REPORT zsuresh_test.
* Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
W_bin_filesize TYPE i, " Binary File Size
w_FILE_NAME type string,
w_File_path type string,
w_FULL_PATH type string.
* Internal tables declaration
* Internal table to hold the OTF data
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
* Internal table to hold OTF data recd from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
* Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
* This function module call is used to retrieve the name of the Function
* module generated when the SMARTFORM is activated
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Calling the SMARTFORM using the function module retrieved above
* GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
* format of the output
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
* Printer name to be used is provided in the export parameter
* OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
CALL FUNCTION w_fmodule
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
control_parameters = w_cparam
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
output_options = w_outoptions
* USER_SETTINGS = 'X'
IMPORTING
* DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_otf[] = t_otf_from_fm-otfdata[].
* Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
* BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILE_NAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* WITH_ENCODING =
* PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
* presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* IMPORTING
* FILELENGTH =
tables
data_tab = T_pdf_tab
* FIELDNAMES =
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* OTHERS = 22
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Do reward if helpful
Edited by: sharad narayan on Apr 4, 2008 2:14 PM
Edited by: sharad narayan on Apr 4, 2008 2:18 PM

How to get the entire MIME message from a BodyPart?

Hi there,
I am new to javaMail and quite lost with its way of working.
I have a tool that creates SMIME stuff that needs to be put into MIME envelopes. In the same time I have to manage parsing of simple MIME messages.
My current problem is the following:
I have a BodyPart and I am testing if it is SMIME or not (with checks on the ContentType). If it is, then I want to retrieve the entire MIME message (I mean, the the whole text stuff with the headers and the -possibly- encoded64 content) as a String or a byte[]. But I haven't found anything in BodyPart that returns such a thing (everything is about the content). There might be writeTo() but it gives need an output stream that if piped in a pipedinputstream results in a dead lock...
Help please!!
Lionel

hai
i think you can use the methods in the MimeMessage to get the headers of the message
by using any one the following
1) getAllHeaders() use the enumeartion concept and then get the values for the headers using the getHeader(enum.getNextElements())
2) or use the specific methods such as
getFrom()
getAllRecepients()
getContentType()
3) getHeader(string headername)
bye

How to Get the Current data into Planning Layout from the Planning cube

Hi,
I have a problem in BPS.   I am selecting the data from cube based on Month org details but I want to see the latest data.   How can i get this data into planning cube.
Like
data
Tran           cal month            org               amt
1                 jan                        a                  100
1                 feb                        a                   200
if i want to read based on Tran org as input values I shoud get the below data but I am getting the previous data.
Tran           cal month            org               amt
1                 feb                        a                   200
Kindly help me in this regard
Thanks
Naveen

Naveen,
    Are yo having issue when you save something in the layout, the data doesn't appear in the listcube ? Or do you have issue that the latest data you see in the cube doesn't appear in the layout ?
For the former issue, please look at your selections of listcube and for the second issue, please check your planning level definition, make sure all the restrictions you have applied are valid for this latest data to be presented in the layout.
Hope this helps.
Cheers
Srini

How to get the Survey result with a External Provider

Hi all
We have an scenario where we create a Survey and it's executed for a third party, and then they send to us the results for example in a excel sheet.
Some know how we can upload the survey results per each client into CRM,
Best Regards.

Go for ELM processing.....create mapping and ELM the file in the system....In the BADI enhancement for processing steps, define the logic for processing the response through an activity....
Create Activity
Attach the questionaire to the Activity...
ELM the file that you received
Process the file filling up answers on the activity questionaire...
Hope it helps...
Thanks
Nikhil

How to get the entire result into an XMLDocument??

Similar Messages

Maybe you are looking for