How to give the application server file path in the module pool programming

Hi,
     Could somebody help me how to provide the application server file path in module pool programming once the logo is uploaded to sap system.
For eg I have imported a logo name owens into sap system by using transaction se78; now I need to call the path in the below url,
if container2 is initial.
CREATE OBJECT CONTAINER2
EXPORTING
    CONTAINER_NAME              = 'PICTURE_CONTAINER2'.
CREATE OBJECT PICTURE2
EXPORTING
    PARENT = CONTAINER2.
CALL METHOD PICTURE2->SET_DISPLAY_MODE
EXPORTING
    DISPLAY_MODE = CL_GUI_PICTURE=>display_mode_fit_center
EXCEPTIONS
    ERROR        = 1.
CALL METHOD PICTURE2->LOAD_PICTURE_FROM_URL
EXPORTING
    URL    = " ? "
EXCEPTIONS
    ERROR = 1
    Others = 2.
endif.
Thanks in advance
Deepu

hi Deepu,
Use FM '/SAPDMC/LSM_F4_FRONTEND_FILE' for fetching the data from the application server path/presentation server path
Regards,
Santosh

Similar Messages

Application server file path vaidation

I have written the code for application server file path validation.
DATA : l_fname TYPE filename-fileintern." type c.
DATA : l_filpath TYPE filename-fileintern,
 l_filname(40) TYPE c.
PARAMETER : p_sucfil LIKE rfpdo-rfbifile OBLIGATORY. " rlgrap-filename
AT SELECTION-SCREEN ON p_sucfil.
l_fname = p_sucfil.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
 logical_filename = l_fname
 OPERATING_SYSTEM = SY-OPSYS
PARAMETER_1 = ' '
PARAMETER_2 = ' '
PARAMETER_3 = ' '
USE_PRESENTATION_SERVER = ' '
 WITH_FILE_EXTENSION = 'X'
USE_BUFFER = ' '
ELEMINATE_BLANKS = 'X'
IMPORTING
EMERGENCY_FLAG =
FILE_FORMAT =
 FILE_NAME = l_filpath
EXCEPTIONS
 FILE_NOT_FOUND = 1
 OTHERS = 2
IF sy-subrc <> 0.
message 'Invalid file name' type 'E'.
ENDIF.
But always i will get Invalid file name.
Y is it so.
pls help me.

Praveen,
I have checked ur code and I found that if i give a logical file name from
tran. FILE under folder 'Logical file name definition, cross client' then ur code works. Pl. check.
Regards,
Joy.
DATA : l_fname TYPE filename-fileintern." type c.
DATA : l_filpath TYPE filename-fileintern,
l_filname(40) TYPE c.
PARAMETER : p_sucfil LIKE rfpdo-rfbifile OBLIGATORY. " rlgrap-filename
AT SELECTION-SCREEN ON p_sucfil.
l_fname = p_sucfil.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = l_fname
operating_system = sy-opsys
with_file_extension = 'X'
IMPORTING
file_name = l_filpath
EXCEPTIONS
file_not_found = 1
OTHERS = 2
IF sy-subrc <> 0.
 MESSAGE 'Invalid file name' TYPE 'E'.
ENDIF.

Error while accessing the application server file

Hello,
When I try to load the data from CSV file to PSA , I am getting following error message
"Error while accessing the application server file"
"Errors in source system"
I gave the right file path
I am not sure about this error message.
Thanks,

Hi ram,
if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
Bye
Frank

Regarding Application server file path browsing

Hi All,
I have a issue regarding Application Server File Path browsing.
Actually in my selection-screen i will declare a parameter as Application Server File Path now when i press F4 in that field it should be able to browse through Application Server Path's.
Just like F4_FILENAME in the case of Presentation Server File Path Browsing.
Can anybody solve my issue.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi Shaik,
Just copy and paste:
Here is the code for retrieving list of files contained within specific Application server directory(SAP).
PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
include structure salfldir.
data: end of it_filedir.
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
exporting
name = p_fdir
tables
file_tbl = it_filedir.
List of files are contained within table it_filedir
loop at it_filedir.
write: / it_filedir-NAME.
endloop.
Hope this will help you.
Let me know incase of any concerns.
EDIT:
There are few FM for ur refernce :
RZL_READ_DIR_LOCAL
SUBST_GET_FILE_LIST Return table with file list for the given directory (pattern allowed)
F4_DXFILENAME_TOPRECURSION Popup to select one file from the given application server directory
TH_SERVER_LIST Returns list of application servers.
EPS_GET_DIRECTORY_LISTING Lists filenames from the application server .
Cheers
Sunny
Rewrd points, if found helpful
Message was edited by: Sunny

How to check whether the Application Server file has already been opened?

Hi Experts,
I have a query related to Application Server file. I am using multithreading concept to process the data and write it in to a single file.
For example, I have 4 workprocesses. Each workprocess will process the data and whenever it has a record available it will access the file and write it directly.
Problem is the statements that are written in the workprocess is same and I want to check the status whether the file has been opened or not ?
Thanks in advance!!!
Thanks,
Babu Kilari

Depends on the structure, and whether the data needs to be sorted in some way in the final file.
In any case, I don't think there will be a significant performance difference between using OPEN DATASET again and getting funny with Unix commands.
If you don't need to sort the final file, you can use strings to read, concatenate and write the data even without line-based DO ENDDO loops, this works pretty fast.
I hope we are not talking about GBytes of data
Thomas

Regarding Application server file path

Hi All,
please explain the process how to create logical file path in FILE t-code.

Hi,
logical file path
The (platform-independent) logical file path is evaluated at runtime to get the (platform-dependent) physical path (see Assignment of Physical Paths to Logical Path).
Two examples of this are:
· Logical file path: BW_OLAP_CACHE
Name: BW OLAP Cache
· Logical file path: BW_OLAP_CACHE_SPAN
Name: BW OLAP cache cross-application server
Assignment of Physical Paths to Logical Path
At runtime, the physical path assigned for the corresponding operating system platform is generated from the logical file path.
Since the physical path is platform-dependent, the customer must set it her/himself. The closer the file is to the application server or, with the cross-application server cache mode, to the application server, the faster it can be found and read.
Log(ical) path: BW_OLAP_CACHE
Name: BW OLAP Cache
Syntax group: UNIX (all Unix platforms)
Phys(ical) path: /usr/ (Syntax group WINDOWS NT)
In a heterogeneous system landscape (such as UNIX and Windows NT servers) all system-specific syntax groups must be maintained. Ensure that the definitions for the various syntax groups point to the same directory.
5. Save your entries
for detailed information
Have a look at this links... i guess it explains what you are looking for...
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/ab3a57df3b11d189fc0000e829fbbd/frameset.htm
http://help.sap.com/saphelp_sm40/helpdata/EN/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
Regards,
Raj.

Validation and F4 help on an application server file path parameter

Hi
I have a field on a selection screen called File Path and it is for a download program where the user needs to specify the path for the download (NOT THE ACTUAL FILENAME).
I am trying to find a function or method that allows a user to use F4 help to browse for a directory rather than a specific file. There are lots of posts out there asking this question but all of the answers point to functions that allow you to browse for a particular file rather than just the file path/directory.
Does anyone know of a function that provides F4 help to browse for a file path on the Server (NOT PC). I would want the user to just be able to select the directory or path and have the path returned. They should not need to pick a specific file.
F4_DXFILENAME_TOPRECURSION is a very good function but unfortunately it makes the user pick a file rather than just a directory.
In addition to this, does anyone know of a function or method that allows you to then validate the path\directory that is entered?
Thanks for your help
Nicole

Hi,
You can try with the FM 'EPS_GET_DIRECTORY_LISTING'. With this Fm module you will get you the list of files of a particular path in an internal table. Then you can populate this internal table in F4 help.
Hope this solves your problem. If any difficulty, come back to me about that.
Below are some other FM related to application server directory. Hope these Helps.
EPS_GET_DIRECTORY_LISTING
EPS_GET_DIRECTORY_PATH
EPS_GET_FILE_ATTRIBUTES
EPS_GET_FTP_SYSTEM_INFO
Regards,
Shailesh Jadhav

Empty the Application server file

Dear Friends,
Good Morning.I have a requirement to empty the Given application server file.How can we achieve through Programmitically.Pls. help on this..

HI
GOOD
go through these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3c7f358411d1829f0000e829fbfe/content.htm
thanks
mrutyun

Save string data type text in the application server file opened in binary

Hi All,
My requirement is to save the string "abcd    23432423   asdada" to the text file in the application server.
I have written like this. but its not getting saved properly in the text file. Please help.
constants X_LINESIZE type I value 128.
types X_LINETYPE type X length X_LINESIZE.
data: WA_TAB_X type X_LINETYPE.
data: str1(64) type C.
data: WA_TAB_X_HDR1 type xstring.
str1 = 'abcd    23432423   asdada'.
CONVERT TEXT STR1 INTO SORTABLE CODE WA_TAB_X_HDR1.
concatenate F_FILENAME1 SY-SYSID F_FILENAME2 '/' TAB_REGUT-TSNAM '.TXT' into F_FILENAME1.
open dataset F_FILENAME1 for output in binary mode .
if SY-SUBRC = 0.
    transfer WA_TAB_X_HDR to F_FILENAME1.
    loop at TAB_X into WA_TAB_X.
      transfer WA_TAB_X to F_FILENAME1.
    endloop.
endif.
close dataset F_FILENAME1.
Edited by: madhuri sonawane on Jun 2, 2009 4:05 PM

HI,
constants X_LINESIZE type I value 128.
types X_LINETYPE type X length X_LINESIZE.
data: WA_TAB_X type X_LINETYPE.
data: str1(64) type C.
data: WA_TAB_X_HDR1 type xstring.
data : file (1000) type c.
str1 = 'abcd    23432423   asdada'.
CONVERT TEXT STR1 INTO SORTABLE CODE WA_TAB_X_HDR1.
concatenate F_FILENAME1 SY-SYSID F_FILENAME2 '/' TAB_REGUT-TSNAM '.TXT' into F_FILENAME1.
open dataset file for output in binary mode .
if SY-SUBRC = 0.
    transfer WA_TAB_X_HDR to file.
    loop at TAB_X into WA_TAB_X.
      transfer WA_TAB_X to file
    endloop.
endif.
close dataset file.
regards,
Munibabu.k

How to create a gui pf status and guititle in module pool programming?

hi frnds,
how to create a gui pf status and gui title in module pool programming?
my problem is i created a screen and wen execute the screen by a tcode.am nt able to activate SAVE BACK EXIT CANCEL COMMANDS?.how to do this can any one explain in detail procedure?
plz gve step by step process.

Hi,
For Title:In PBO...just write
SET TITLEBAR 'ZTITLE'.
double click on 'ZTITLE'....give whatever title u want...save it...activate...and check...reward points if useful...
PF means FUNCTION CODE
ex; set pf-status 'zrstatus'.
double click on the zrstatus expand the application server ,
at the time of execution the default menu(ie system,help),application toolbar buttons like enter,help etc and function keys(by default there will be no function keys)as are there on the normal
will appear on the screen.
Details:
PF-STATUS is used to set the GUI Status of a screen, ie you can control the options on your menu bar, application toolbar, the function keys assigned to various options etc.
Implementing the status for a screen can be done in 2 ways:
1) Create the GUI status using the object list of the program or by using the transaction SE41. Then, assign it to the screen using SET PF-STATUS statement.
2) Create the GUI status by means of forward navigation, ie, use the SET PF-STATUS 'XXX' statement where 'XXX' is the name of the GUI status and double click on it to create it.
Status names can have a maximum of 20 characters.
After assigning a GUI status to a screen, this is inherited to all subsequent screens. In order to have a different status for each of the subsequent screens, you have to set a separate status for each screen.
In transaction SE41,
1) Give the program name and the status name and click on the Create button.
2) Go to 'Function keys' and expand.
3) On top of the save icon type SAVE, on top of the back icon type BACK, on top the the exit icon type EXIT etc ie on top of all the icons that you want to use, type the respective names that you want to give.
Whatever you have typed now becomes the function codes of these icons and can be used in your program.
For example you have a screen 100.
In the 'Element list' tab of the screen, give "ok_code" as the name where "OK" is the type of screen element. Activate screen.
The flow logic for the screen looks like this:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
Create the modules STATUS_0100 and USER_COMMAND_0100 in the main program by simply double clicking on them.
The code for these modules can be something like this:
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Example'. "Example is the name of the GUI status
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'SAVE'.
"call a subroutine to save the data or give statements to save data.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
Regards,
Shiva Kumar (Reward If helpful)

How to put scrol bar in table viw control in module pool programming

how to put scrool bar in table-view control in module pool programming

Hi Rani,
You need not insert Scrollbar in the table control, it appears automcatically once the amount of data vertical or horizontal limit of table control.
Regards,
Sathish
Note : Reward useful Answers

Want to change the text of a coloumn dynamically in module pool program

Hi to all experts,
I need to change the text in a table control( of a column)of a module pool program dynamically ....depending on the company cod e.

Hi,
In program depends on the condition you can access the table_control-cols-name and modify it accordingly.
Eg:
CONTROLS TABLE_CONTROL TYPE TABLEVIEW USING SCREEN 100.
you can access the control like:
TABLE_CONTROL-COLS[1]-SCREEN-NAME
and modify the same dynamicaly
cheers
shibu

Application server file path name separated by apace

Hi All,
I am writing files on application server. Below is my fie path.
parameters: p_o_file like rlgrap-filename default   '/xxx/tmp/app/outbound/1~lcxxxx~ACTUAL~periodfyyear~RR.txt'.
data : mnthyear(12) type c,
         year(6) type c.
case p_rpmax.
when '010'.
p_ryear = p_ryear - 1.
concatenate 'FY' p_ryear into year.
concatenate 'OCT' '-' year into mnthyear separated by space.
replace 'periodfyyear' with mnthyear into p_o_file.
In the report output I am getting the file name correctly.
Output File: /dev/tmp/app/outbound/1~LC1000~ACTUAL~OCT - FY2013~RR.txt
When checked in AL11, it is showing me the below file name
1~LC1000~ACTUAL~OCT
my file name is truncated after space.
Can we create a file name with spaces? Awaiting your replies.
Thanks,
Haritha

Pl find snipet..
FORM save_file.
   DATA: lv_data TYPE string.
*Move complete path to filename
   gv_file = '1~LC1000~ACTUAL~OCT - FY2013~RR.txt'.
* Open the file in output mode
   OPEN DATASET gv_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
   IF sy-subrc NE 0.
     MESSAGE 'Unable to create file' TYPE 'I'.
     EXIT.
   ENDIF.
   LOOP AT gt_spfli INTO gwa_spfli.
     CONCATENATE gwa_spfli-carrid
                 gwa_spfli-connid
                 gwa_spfli-countryfr
                 gwa_spfli-cityfrom
                 gwa_spfli-airpfrom
                 gwa_spfli-countryto
                 gwa_spfli-cityto
                 gwa_spfli-airpto
                 gwa_spfli-arrtime
      INTO lv_data
      SEPARATED BY ','.
*TRANSFER moves the above fields from workarea to file with comma
*delimited format
     TRANSFER lv_data TO gv_file.
     CLEAR: gwa_spfli.
   ENDLOOP.
* close the file
   CLOSE DATASET gv_file.
ENDFORM.

Equalent of F4_filename function module for application server file path

hi experts,
        i am using cl_gui_frontend_services=>file_open_dialog
       for bring file path dynamically for user, in front end.
      same feature i want to give when i am trying upload file from application server.
kindly provide me function module or class method, which will do it.
thanks in advance
regards,
pavan

Hi,
Use FM F4_DXFILENAME_TOPRECURSION
Sample code here
report ztest.
data : filename like DXFIELDS-LONGPATH.
data : begin of itab occurs 0,
a(200) type c,
end of itab.
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
EXPORTING
I_LOCATION_FLAG = 'A'
*I_SERVER = '?'
*I_PATH =
FILEMASK = '.*'
*FILEOPERATION = 'R'
IMPORTING
*O_LOCATION_FLAG =
*O_SERVER =
O_PATH = filename
*ABEND_FLAG =
EXCEPTIONS
RFC_ERROR = 1
ERROR_WITH_GUI = 2
OTHERS = 3
break-point.
open dataset filename for input in binary mode.
while sy-subrc = 0.
clear itab .
read dataset filename into itab.
append itab.
endwhile.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = 'd:\abc.txt'
FILETYPE = 'BIN'
TABLES
DATA_TAB = itab
Regards,
Satish

APPLICATION SERVER FILE PATH

Friends to surf the flat file
function module
what we use is
'KDGET_FILENAME_ON_F4'_
like this what is the fuction module for application server?????

Try:
F4_DXFILENAME_TOPRECURSION
PARAMETERS: f_app(128).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR f_app.
PERFORM get_fname_app.
FORM get_fname_app.
DATA: c_fnh_mask TYPE dxfields-filemask VALUE '.',
search_dir TYPE dxfields-longpath VALUE '/sapglobal/users',
file_path LIKE dxfields-longpath.
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
EXPORTING
i_location_flag = 'A'
i_server = ' '
i_path = search_dir
filemask = c_fnh_mask
fileoperation = 'R'
IMPORTING
o_path = file_path
EXCEPTIONS
rfc_error = 1
OTHERS = 2.
IF sy-subrc EQ 0.
f_app = file_path.
ENDIF.
ENDFORM. "get_fname_app[/code]
OR
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_apath.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
IMPORTING
serverfile = p_apath
EXCEPTIONS
canceled_by_user = 1
OTHERS = 2.

How to give the application server file path in the module pool programming

Similar Messages

Maybe you are looking for