How to handle Asynch Synch (IDoc - SOAP) interfce without using BPM

Hi Experts,
I have a Idoc to SOAP scenario and where I need to hadle SOAP response but for this how it can be handle without BPM I am unable to figure out. Specificaly it is a interfacce with SFDC (sales force.com) CRM and need to handle IDoc - SOAP interface and response needs to be captured with another idoc which can be sent back to SAP.
Any suggestion will be helpful.
Regards,
Nitin Patil

Hi,
you cannot do it with IDOC adapter unless you have PI 7.3 without a BPM
you need to use a different adapter like ABAP proxy (on java) or RFC
hope it's clear,
Regards,
Michal Krawczyk

Similar Messages

Choosing Receiver Interface (IDoc or RFC) without using BPM

Hi,
We have a scenario wherein the receiver interface (either IDoc or RFC) must be dynamically determined at runtime based on the source message. I've tried using Multi-Mapping but this did not work since IDoc and RFC interfaces are not on the same Adapter Engine.
How do I configure this scenario without using BPM?
Thanks,
Francis

Hi,
>That was my first solution but it did not work since it seems that conditions only work for determining the Operation Mapping to use for the same Receiver interfaces.
not true - not only Operation Mapping but also receiver agreement
so the receiver's channel
>I was misled into thinking that we could use it to dynamically determine the receiver interface.
but you can do it over there
intrface determination can be used for pseudo receiver determination too
so you can have one interface that either goes to one
channel or the other (within the same receiver)
Regards,
Michal Krawczyk

How to handle system exception in Sync communication without BPM? Help!

Hi Experts
   I have a Synchronous scenario in XI: webservice <------>RFC SAP R/3.
Webservice is making a sync call to RFC FM in SAP R/3 system.
   I want to handle system exception when SAP R/3 is down and send an email alert.
   Can I achieve this in graphical mapping without BPM? How? Kindly provide necessary steps/screenshots for the same.
   Are there any other alternatives for handling system exception apart from mapping and BPM?
Thanks
Gopal

Hi GopalKirshna,
      Yes,You can handle the Exception if at all you are using the RFC.You can achieve this without using BPM.
   Using Fault message you can catch the System Exception and even the primary role for Fault Message is to catch the RFC Exceptions.
   Please refer the Fault messages Notes to achieve this you will understand better.
Hope I am clear.
Please let me if you have any more queries regarding this..!
Thanks and Rewards,
Chandu.

Collecting Idocs without using BPM

Hi Experts,
I am working on a sceanrio, where Idocs are coming from sap and we need to generate a single Flat file out of them.
For this scenario first we need to collect the Idocs and then process them to make a single file output.
To achieve the same I am using the BPM to first collect the Idocs and make a packet out of them and then processs it to generate a single flat file.
Can someone please suggest me that, How can we achieve the same without the BPM.
If yes, how can we do that?
Thanks in advance.
Regards
Pradeep

Pradeep ,
Option 1 : /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
here you collect them as a file and file is picked up and sent to the target
Option 2 :
in WE20 in ERP set idoc package to 50
in XI sender idoc channel - package to 50
XI will receive 50 IDOCs at once...
(courtesy Michal....till then i thought there is no sender idoc adapter )
Option 3 : collect using BPM.
Option 4 : This is what i woould suggest....no need of collecting you can send one idoc at a time generate the file.....why do u want to collect?
Edited by: Tarang Shah on Mar 20, 2009 7:38 AM

HT1689 How can I play podcasts on my iphone without using data?

How can I play podcasts on my iphone without using data?

I used to sync my podcasts to my phone individually, but found out that the Podcast app works better for me. It continously downloads the podcasts (not really sure when, that's the only thing, when its downloading it may use data depending on where you are) and also deletes the ones i have listened to. Hopefully that will help you out!

How to display the fields in ALV Output without using Field catalog?

How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.

Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_grid_title            = 'REPORTING'
            is_layout              = gt_layout
            it_fieldcat             = lt_fieldcat[]
       tables
            t_outtab                = itab.

Asynchronous, but need Ack without using BPM and IDocs.

Hi Experts,
                 I would like to do a scenario i.e., "Asynchronous communication, but need Acknowledgement without using BPM and also without using IDocs whether it is sender side or receiver side". Please help me.
Thanks in advance
Srihari.

Without using BPM will be little longer process. But the alternative way is to add one more receiver in the receiver determination and send some file to that location with the actual mapping getting executed for the actual receiver. and in the second interface you can get the file created at second receiver back to the source location. But this will be little long as compared to synchronous scenarios.
Flow:
Source
          Receiver 1--> Actual mapping as per requirement
          Receiver 2(For Ack)--> Create a mapping with blank file sent to Receiver
Receiver 2-->File Adapter--> Source through 2nd mapping/interface and keep the File adapter pooling interval around 5 sec or less so that you can get the file back to source location.
Regards
Anand

Multi-Mapping in IDOC without using BPM ?

Hi ,
Please check ..
Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards
PS

Solved .. Thx every one .
Approache Used :
1. Created mapping with Change signature on target Message type(idoc) with 1..N Occurence.
2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

How to transfer files from mac to ipad without using itunes

how to transfer files from mac to ipad without using itunes ???
as i want to use my ipad for official use as well...please suggest..

well to be 100% technical, no you didn't but that aside, it good to know there are ways for people to transfer music into the default apps without iTunes, if they have a need.
I tend to use 3rd party apps for documents, like your mentioned iExplorer etc, which are handy.
I see from a search the two "apps" you mentioned are not iOS apps, which I had assumed, SyncPod and FreeSync are apps for your computer, that would explain their access to the default Music/Video apps.
I had wondered how Apple had allowed iOS apps in the store that could get around the sandboxing in iOS of apps.
Message was edited by: CGW3

I have all my pictures in an external drive, how do i create a library in iphoto without using my internal drive space?

i have all my pictures in an external drive (around 1tb), how do i create a library in iphoto without using my internal drive space? thanks!

In iPhoto use the command "File > Switch to Library" and then click "Create New" in the Library Chooser panel.
Select a folder on your external drive as the destination.
You can also get to this panel by holding down the alt/options key when you launch iPhoto.

HT201371 how do i un-disable my iphone 5s without using itunes

how do i un-disable my iphone 5s without using itunes

Make a Genius Bar appointment at your nearest Apple Store and have them Restore it as a new iPhone in iTunes.

How can i ge into the app store without using a credit card?

How do i get into the app store without using a credit card?

Unless you can find an item in the store that costs the same as your balance then you will need to contact iTunes Support and ask them if they can remove the balance : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How can I back into the main screen without using the activator bottom?

How can I back into the main screen without using the activator bottom?

I assume you mean the HOME button. You cannot. The HOME button is the only way to exit an app.

Does anyone know how to get an application you had once without using App Store?

Does anyone know how to get an application you had once without using App Store?
Because I'm underage and I couldn't get it back.
I just want it back, I'm not going to use any money in App Store...

When you say you "had it once", how did you get it then? The App Store has only been around for a few years, so there are lots of apps out there that you would once get from the developer, but now they're only available on the App store. Which app(s) are you referring to?

HT2204 I have recently immigrated to the US but my apple ID is still stuck with my previous country. How do I change the country? Preferably without using a credit card

I have recently immigrated to the US but my apple ID is still stuck with my previous country. How do I change the country? Preferably without using a credit cardI've only been here in the US 2 months and still have no US credit card.

Your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

How to handle Asynch Synch (IDoc - SOAP) interfce without using BPM

Similar Messages

Maybe you are looking for