How to handle the prefix logic in query designer

Dear all,
Please suggest me to handle the prefix logic or any combination of values need to be find from string.
like if i want to find data which contain "prime" word in the data or as prefix.
like data "prime coil" so need to identify that data contain prime word.

Hi Viral,
Please use Virtual Characteristics to handle this requirements.
Thanks,
VSK

Similar Messages

How to get the standard Menu of Query Designer into Web Template

Hi Experts,
is there a way on how to put the standard menu within Bex Query Designer (after executing a Query with the Query Designer you get into ad-hoc reporting with a menu including several functions like print, show as..., properties, etc) into an individual Bex Web Template?
Copy & Paste source code will not work I guess because of several javascript functions I don't have access to.
Thanks & Best regards
Tobias

BEx queries are displayed on the web using standard web template 0ANALYSIS_PATTERN or some customized version base don your implementation.
You can either include the 0ANALYSIS_Pattern web template in your custom template or use Save as to create a new template with 0ANALYSIS_Pattern AS THE STARTING POINT.

How to sum the result rows at query designer

Hi,
We want to sum the result rows which are at the end of the row by the help of query designer?So ,we directly see at analyzer
exp:
..A.jan...A.feb...B.may...B.jun...SumA...SumB....SumA+B
X..1............9..........6..............7........10.........13..........?????
Edited by: zarata on Oct 23, 2011 12:49 PM
Edited by: zarata on Oct 23, 2011 1:07 PM

Hi,
Could you please provide some more information.
if you have characteristics iobject whose values are (A, B etc) and calendar month in rows and then at column level you have key figures then if you have turn on the "Display Result Rows" property of both iobject in Bex as "Always" you can get the result. At the same time you can set "Display Overall result" property of the Query to get overall result.
Regards,
Pravin

How to handle the table control in bapi?

how to handle the table control in bapi? example va01.
i pass multiple line item what is the procedure?
header detail same .
eample ship to party
sale to party.
line item mulptiple
10 mat1
2o mat2
30 mat3.
in bapi we can pass sinle line item.
any way to handle multiple line item pass through the bapi.
Message was edited by:
Karthikeyan Pandurangan

BAPI is not going through the screen flow logic so you need not to worry about the table control. Just check in the BAPi there must be one table parameter for line items just pass one int table with your data to that table parameter it will automatically update the tables.
Regards
shiba dutta

How to handle the table control While working with LSMW?

How to handle the table control While working with LSMW?

its possible in lsmw,
Hi,
LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
Thanks

How to handle the situation to forward work item manually?

Hi All,
In my workflow -
For agent determination I have some custom logic to determine agents. If custom logic donu2019t return any agents then the requirement is work item needs to send back to workflow initiator.
My issue-
When no agent determines
1.Work item needs to send back to workflow initiator - and he should not able to Approve or Reject work item - He Can only forward work item to any other person manually (he determines to whom it should forward).
2. After manually forwarding the work item it is normal process 2 level of approval from that point .
Please let me know for the first item how to handle the situation?
I have developed 2 section - one goes with regular agent determination -
and the other one when no agent determines then I am assigning back to workflow initiator. Now I want to handle that - initiator should not accept or reject and he can only forward to someone. How to develop this?
Please let me know your thoughts.
Thanks in advance.
Rajesh,

Hi All,
Thanks for the answers.. sorry for late replay.. requirement was not confirmed.
1. As I described in my question
After my custom conditions.. I have to send workitem back to initator ( Now initiator forwards the work item to someone else ( need to restrict users based on role - )..
While doing this process initiator should not have access to approve or reject he should only forward the workitem.
After forwarding the work item -this person should have approve or reject options.
My question is not answered..
1. As Vijay told..
Dont give Approve and Reject Options and in Description u specify like
If I dont provide approve/reject when I am sending the work item to initiator - After initiator forwarding this work item - how do we the other approver will get options Approve and Reject?
2. AS -surjith kumar
If your Using the Rule or Expression you have to restrict via coding - This will solve one of my problem -
How I can restict users with role based?
My problem is not solved.. Initiator should not have access to approve but He should only forward the work item...
Please let me know...

How to handle the master data when we are loading the from multiple clients

Hi,
We are loading HR data from two different clients 101 and 102 of same source system.
Here we are facing the problem with msater data maintenance for employee in BW, whose employee numbers are same.
For example client 101 employee range is 10001 to 10100.
In client 102 also same employee range.Then how to handle the above scenario
Is there any solutions apart from compounding of infoobjets with logical system.
Thanks in advance for your sugessions.
Thanks.
Maria.

Hi ,
you can create copy of 0EMPLOYEE Object.
Load one client master data to the copied object.
Example:
1. Create ZEMPLOYEE copy of 0EMPLOYEE.
2. create the transformation or rules
3. You have to follow same for remaining objects
regards,
HREDDY

How to set the table input in Query template?

Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
Hemalatha

Hema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

Formula Logic for Dates in the Cell Editor in Query Designer

Hi All
We are on BI7. (This is in the Cell Editor in Query Designer)
I am trying to create a formula in one cell that enters a date based on the following logic (Lets call this formula A):
I also have a placeholder "Cell reference" for a Date in another cell in the Cell Editor (Lets call it B).
I also have two other dates in seperate cells in the Editor (Lets call them C and D)
What i need to do is check that either C or D are not blank i.e one at least has a date and if so enter the date that is in B in A.
My formula logic in (Cell A) at the moment is as follows:
( Cell C <> 0 ) OR ( Cell D <> 0) * Cell B
When I run the query It is coming back with either a 1 or 0 depending if there is a date in C or D.
What I want it to do is to display the actual date of 'Cell B' in 'Cell A' if ( Cell C <> 0 ) OR ( Cell D <> 0)
If the value of B is blank ie no date I also want A to be blank i.e not equal zero or a blank date ie 00/00/0000
Example 1
Cell A    08/09/2009
Cell B    08/09/2009
Cell C   15/03/2010
Cell D
Cell A should = 08/09/2009 as there is a Date in Cell C or D and if so enter the date of Cell B in cell A
Example 2
Cell A
Cell B    08/09/2009
Cell C
Cell D
Cell A should = BLANK as there is a NO Date in Cell C or D
Example 3
Cell A
Cell B
Cell C   15/03/2010
Cell D
Cell A should = BLANK as there is a No Date in Cell B although a Date in cell C or D.
Thank you for assistance in advance
Kind regards
Stevo

Hi there,
It seems you have done almost everything...
What it seems that is missing is probably the cell reference for Cell C and for Cell D, or did you forget to mention it here?
So here it is the big idea:
- In the Cell Editor of the query designer, create a new cell reference for Cell C, let's name it ref_cell_c;
- In the Cell Editor of the query designer, create a new cell reference for Cell D, let's name it ref_cell_d;
- In the Cell Editor of the query designer, create a new cell reference for Cell B, let's name it ref_cell_b;
- In the Cell Editor of the query designer, create a new formula for Cell A, let's name it form_cell_a;
The form_cell_a should be created by the following:
( COUNT(ref_cell_c) + COUNT(ref_cell_d) ) * ref_cell_b
So COUNT(operand) returns 1 if operand is different of 0 else it returns 0; So if ref_cell_c has any valu or ref_cell_d has any value it should return the value of ref_cell_b.
Please note that with this formula, if you have values in both ref_cell_c and ref_cell_d this formula returns 2 * ref_cell_b, which is not what you pretend, I'm assuming you'll have value only for the following combinations:
ref_cell_c has value but ref_cell_d don't have any
ref_cell_c don't have any value but ref_cell_d has a value
ref_cell_c don't have any value neighther has ref_cell_d any
Diogo.

Front end issue (how to handle the existing work along with new one)

We have upgraded a copy of our production system and are analyzing different pieces to make sure that we have enough confidence in moving ahead. We are getting a good feel in the back end activities but do have many questions in Front end area, such as
·     What is the best way to handle existing excel reports yet at the same time providing users ability to create new queries and excel reports. Currently users are using Bex browser to access reports but this is no longer supported for new reports.
·     Do we must have portal configured in order to access the new features?
·     Is there a risk if users open the existing workbooks with the help of new analyzer?
·     Is there a risk if users open the existing queries with the help of new query designer?

Until you migrate them to 2004s, you can continue to access the 3.x queries, etc. using the 3.x tools.
However, once you modify/save the 3.x query using the 2004s tools, it will convert that object and all related objects (variables, structures, etc.) to the new 2004s version.
A suggested strategy for conversion of BEx objects to 2004s is to migrate them by infoarea. For example, convert all FI-GL objects together. This method enables BW teams to create a "roadmap" for migration.

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How to handle the different pricing conditions changes in BI.

Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
Ramana

Hi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.

How to get the current logical system?

Dear Abapers:
I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!

Hi,
Check with the table T000, the Logical system field name is LOGSYS.
Regards
Thiru

How to handle the stale cheques in EBRS

Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroe

Hi
any bady know about this plz respond.
Thanks in Advance
kishore

How to handle the prefix logic in query designer

Similar Messages

Maybe you are looking for