How to handle -ve sign in JDBC SP

Hi ,
We have sending -ve value to JDBC stored procedure where the SP type is DECIMAL.but, its giving error that "number format exception caught".
I think DECIMAL type will not be able to convert -ve sign. How can i handle this..?
ex:
input value = 2345.00-
required output in JDBC SP is : 2345.00-
used type in SP structure : DECIMAL
Should i change SP type to some other data type to handle -ve sign ? how to do that ?
plz help
Vin

Hi Vin
I think the problem is because minus ( - ) sign at the end. Correct format should be like below
- 2345.00
You can change the format in PI mapping and then send it to SP.

Similar Messages

How to handle fieldnames ending with # in JDBC receiver?

Hello Experts,
I am developing a scenario JDBC to IDOC. I have 2 tables for header & line item. I have to retrieve a header record first using sender JDBC & then for that header need to fetch the corresponding lineitems from second table.
We cannot have data types defined in XI with fieldnames containing # or any other special charecter. Both DB tables contain fieldnames ending with #.
For Sender JDBC, I managed it in SQL query using :
Select abc, xyz# as xyz .... from tbname
But for receiver JDBC we need to define a data type with the typical format ( Doccument format required for JDBC receiver).
Please let me know how to handle this for JDBC receiver.
Thanks in Advance & hope for a quick replies.
Abhijeet.

Hi Abhijeet,
If you can write a query with join( you can call join query using JDBC adapter), i think this would be a fastest way and good approch rather than having 2 JDBC call.
Another approch would be writing SP( stored procedure and then you can have your complete logic here). You can call SP using JDBC adapter.
Eventhough query would be complex...it will be one time job.:)...I am not sure about data type for handling field names with special characters.
Let me know if you need more details.
Nilesh

How to Handle Huge record count in JDBC

Hi,
Can we process 20 lakhs records which would size near to 136 MB using JDBC sender channel in a single call and the same need to deliver to Target system which is JDBC too.
Kindly mention which way this can be achieved.
Regards

Hi Venkata,
Kindly go through this below link to processing the huge amount of data from the sender JDBC.
http://scn.sap.com/people/peng.shen2/blog/2009/12/23/pi-how-to-handle-high-volume-data-per-jdbc-adapter
https://scn.sap.com/thread/2005124
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/09/24/jdbc-receiver-scenarios-best-practices--how-to-handle-high-volume-load-stored-procedure-design-part6
Best Regards,
Monikandan.

How to Handle the Concurrent User Operation in JDBC

Here I am updating a table base on flag field. Here I am facing concurrent user problem. Please anybody can tell me how to handle this. If anybody update a row. it should be reflect to other sessions

Make sure you are calling Connection.commit() after your update. If you are still having problems, you may need to tweak the isolation level. Different vendors have different default settings.
You could add more details to your post, like database you are using, and the errors you are seeing.
http://www.jguru.com/faq/view.jsp?EID=59102
-Scott
http://www.swiftradius.com

How to Handle SAP SUS XML Acknowledgment

Hi folks,
I have a scenario here where the SAP R/3 system sends a Purchase Order document to SAP SUS through a SAP XI Mapping.
After processing the P.O. document, the SAP SUS system, automatically, returns a Acknowledgment message (ns: http://sap.com/xi/XI/Message/30) to SAP XI.
I need to implement a BPM scenario where SAP XI processes this Acknowledgment message and Logs it into my Monitor System (JDBC Adapter). Actually, the SAP XI needs to send to my Monitor System the status (Success or Fail) of the P.O. processing by SAP SUS.
How can I handle this Acknowledgment message with a BPM Scenario? Is it possible?
Best Regards,
Nascimento

Hi Thiago,
Currently in BPM you can do this with ASYNC-SYNC Bridge design.
You can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
However IDoc adapter is requesting application acks. Therefore you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20handle%20acknowledgments%20for%20idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Also refer the guide: "How To Handle Acknowledgments for IDoc"
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Regards,
Abhy
Message was edited by: Abhy Thomas

Handling Fault Messages for JDBC Receiver (Syn Inbound)

Dear Freinds,
Can we handle fault messages for JDBC Receiver which is synchronous.
OB Proxy Syn <> IB JDBC Syn
1. How to handle the same ? Please give some examples.
2. Should we use Stored Procedures at Oracle side to handle the fault messages and send back as response to the Proxy Response. Will it work.
Thanks & Regards
K.Ramesh

Dear Friend,
I have 2 interfaces where Proxy is OB & JDBC is IB. In the first interface both sender and Receiver are synchronous and in the second one it is Async.
In the first interface i have to send one field from R/3 table along with Native SQL query string to XI and the response of the SELECT query is sent back to the sender.
Assume if no fields are selected based on the field sent then proper error message has to be sent instead of the response message.
In the second interface i will be using UPDATE query at Asyn JDBC receiver.
How to do this if you are having JDBC Receiver.
I saw in many blogs where they had mentioned that we cannot handle fault messages in the Receiver JDBC.
KIindly explain.
Thanks
K.Ramesh

How to handle 2 or more .jar files with an applet

Hey out there
I have created an ftpClient application that uses "jakarta ftpClient". It works fine as an JFrame application � But when I converted the Application into an JApplet I get the following Exception:
java.lang.NoClassDefFoundError: org/apache/commons/net/ftp/FTPClient
I have bundled the main application into a .jar file (Application,jar). But I don't know how to handle the 2 jakarta .jar files with my JApplet??
I Tried to append the 2 jakarta .jar files to the Application,jar with the following code:
jar cvf Application.jar 1.class 2.class�. commons-net-1.4.1.jar jakarta-oro-2.0.8.jar
But with the same result / Exception (I have signed the Jar file!)
Can anyone help me

Hi i have a question with your application can you down- or upload more files at the same time? Because i'm having problems with my ftp application.
Here is the link with my problem maybe you can help me. I will be very pleased when you can help me.
http://forum.java.sun.com/thread.jspa?threadID=5162042&tstart=0
Thx
Satanduvel

How to handle CLOB

Hello,
In my java programme I am picking a huge data from a file and passing it to a oracle stored procedure.
In my oracle stored procedure I pick data line by line and process and to identify a new line I use CHR(10).
The problem is, the file containing the data has data in lines but when the data is read and sent over to oracle called procedure the new line is missing and the complete data is found in one line which is very huge. Hence the processing of data fails.
In Java programme, How should I read the data from the file so that the new line or line terminator remains as it is. Or the data is read exactly as it is in the file.
Also, the Oracle stored procedure argument is of CLOB type. How to handle CLOB in JAVA, that is, pass more than 32767 chars.
Thanks & Regards,
Sanju.

Your problem is that createClob() isn't implemented until JDBC 4 (which I think will come with mustang). The usual way people deal with new Clob records on Oracle is to create the record, initially, with an empty Clob, read the record back and use getClob to get the Clob, then write to that and update the record. (Pretty aweful)
A technique I've found works on Postgressql blobs and which is probably worth a try is to write your own, minimal implentation of Clob. All it needs to handle are the length() and getCharacterStream methods (all others throw UnsupportedOperationException or similar. Try feeding one of those through a setClob(). Might work, might not.
With any luck JDBC will read your stream into the LOB as part of the setClob() action.

How to handle Stored Procedure and Views

Dear All
While dealing with Oracle database related scenario. I came across Stored Procedures and Views. Which are complex in nature. Using SAP XI how we can handle them ?
Is JDBC adaptor is capable of that.? Can you help me Data type structure for oracle.
How max occur play important role in that. How to identify root and item level structure for oracle
I am dealing with stored procedures while inserting data. and using views i need to get data from oracle database.
What is the syntax of query we use to put while using JDBC adaptor?
Please help and provide bit detail information over this so that i can execute scenario
Thanks
Gaurav

1) jdbc:oracle:thin:@xxx.xxx.xxx.xxx:1521:sid
2)Occurence==> o,1, >1 , Unbounded
Occurrence=> ready to accept 0 / 1 / more than 1/ multiple record (for source) and how it will be passed to target.
http://help.sap.com/saphelp_erp2004/helpdata/en/b6/0b733cb7d61952e10000000a11405a/frameset.htm
3)
<StatementName5>
<storedProcedureName action= EXECUTE>
<table>realStoredProcedureeName</table>
<param1 [isInput=true] [isOutput=true] type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName5>
refer
http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm

How to handle stored procedure response having multiple queries

Hi Friends,
While working in JDBC to RFC scenario,I faced an issue that my stored procedure is having multiple SQL queries in it. First Select and then update and again some select options.So,how to handle the response of the stored procedure. I read that while using sender JDBC
" db.processDBSQLStatement=<SQL-Select-Statement>
Either specify a valid SQL SELECT statement to select the data to be sent from the specified database, or specify an SQL EXECUTE statement to execute a stored procedure that contains exactly one SELECT statement "
So, please suggest me is there any other way to catch the output of the stored procedure.Because, if select statement is working fine but if any other quires fails then data inconsistencies can happen.Kindly help me out.
Thanks and Regards,
Nutan

Hi nutan,
>>Already exception is handled in SP.But,issue is that select will never fail so, sender adapter will get the resultset from select and continue process.But if later any other query fails in SP adpter wont be getting any response.
Along with exception you need to handle the case when some other query fails. A SP is like a procedure which will do a certain list of activities before providing the output. So during this activity if some query fail then you can send back the response with a message!!!! And in XI handle this error (by routing it to some error receiver etc)
>>I need to try something like creating a temporary table and inserting the resultset of slect statement in that. and perform all other operations and after successful completion of all the queries.Again i want to get all the values from the temporary table. So,whether I can write such query in the sender communication channel.Please suggest me for this.
Approach looks ok, but think of the delay for JDBC sender adapter. IT will invoke your SP and will wait for it to fill a table and do all the processing. I guess this may become a issue for you.
Check on the frequency of this interface and message size before taking this design approach
Regards
Suraj

How to handle exceptions thrown by event

Hi all,
i have this slight problem, i'm trying to handle accessing a databse from a button click, i'm trying to simulate somebody logging on to a network. the code is as follows;
*@author James Taylor
*@version 30-11-2003
*Logon gui
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.sql.*;
public class LogonUI extends JFrame {
     //instance variables
     private JLabel userNameL;
     private JPasswordField password;
     private JButton logon;
     ButtonHandler handler;
     Connection con;
     Statement stmt;
      *Constructor initialises and creates UI, adds functionality to the button.
     public LogonUI() throws SQLException, ClassNotFoundException, IllegalAccessException, InstantiationException{
          super("Employee Logon");
          Container c = getContentPane();
          c.setLayout(new FlowLayout() );
          //handles what happens when user presses the button
           handler = new ButtonHandler();
          userNameL = new JLabel("Please Enter Password:");
          c.add(userNameL);
          password = new JPasswordField(15);
          c.add(password);
          logon = new JButton( "Logon" );
          //anonymous inner class that is created once the button is pressed.
          //it connects to database to validate user
          logon.addActionListener( handler );
          c.add(logon);
          c.setBackground( Color.pink );
          setDefaultCloseOperation(DISPOSE_ON_CLOSE);
          setSize(250,150);
          setVisible(true);
      *class that opens connection to validate user
     private class ButtonHandler implements ActionListener {
          public void actionPerformed(ActionEvent ae)throws SQLException, ClassNotFoundException, IllegalAccessException, InstantiationException{
               try{
                    boolean isValidUser = false;
                    //Load mysql driver
                     Class.forName("com.mysql.jdbc.Driver").newInstance();
                     //make a connection
                    String url = "jdbc:mysql://localhost/flight";
                    con = DriverManager.getConnection(url)
                    //Create and instantiate a statement obj
                    stmt = con.createStatement();
                    //get a result set
                    ResultSet rs = stmt.executeQuery("SELECT Password FROM employees");
                    //Iterate through the result set
                    while ( rs.next() ){
                         String savedPassword = rs.getString("Password");
                         if (password.getText().equals(savedPassword) ){
                              isValidUser = true;
                              JOptionPane.showMessageDialog(null,"Yipeeeee");
                    if (isValidUser == false){
                         JOptionPane.showMessageDialog(null,"Invalid Password");
                    stmt.close();
                    con.close();
               }catch(Exception e){ e.printStackTrace();}
          public static void main (String[] args) throws SQLException, ClassNotFoundException, IllegalAccessException, InstantiationException{
          LogonUI testAirApp = new LogonUI();
}When the user presses the button the app tries to validate the user.
I have not been able to test the code due to SQL Exceptions thrown in the handler class, and when i try and throw them up from here i get;
LogonUI.java:52: actionPerformed(java.awt.event.ActionEvent) in LogonUI.ButtonHandler cannot implement actionPerformed(java.awt.event.ActionEvent) in java.awt.event.ActionListener; overridden method does not throw java.lang.InstantiationExceptionAny ideas on my code and how to handle these exceptions will be very appreciated. Regards, James

Turn your checked exceptions into unchecked exceptions and retrieve the cause later:
RuntimeException unchecked = new RuntimeException(checked);
Throwable t = unchecked.getCause();Stephen

How ot handle ' in PL/SQL package

Hi All !
How can I handle the sign ' in the phrase OU=Admin ID's in this package ?
DECLARE
-- Adjust as necessary.
l_ldap_host VARCHAR2 (256) := 'SERVERNAME';
l_ldap_port VARCHAR2 (256) := '389';
l_ldap_user VARCHAR2 (256) := 'CN=username,OU=Admin ID's,OU=XXXXX,DC=XX,DC=XXX,DC=com';
l_ldap_passwd VARCHAR2 (256) := 'XXXXX';
l_ldap_base VARCHAR2 (256) := 'DC=XX,DC=XXX,DC=COM';
l_retval PLS_INTEGER;
l_session DBMS_LDAP.SESSION;
l_attrs DBMS_LDAP.string_collection;
l_message DBMS_LDAP.MESSAGE;
l_entry DBMS_LDAP.MESSAGE;
l_attr_name VARCHAR2 (256);
l_ber_element DBMS_LDAP.ber_element;
l_vals DBMS_LDAP.string_collection;
BEGIN
Get always error....Thanks

'CN=username,OU=Admin ID's,OU=XXXXX,DC=XX,DC=XXX,DC=com';'CN=username,OU=Admin ID''s,OU=XXXXX,DC=XX,DC=XXX,DC=com';

How to handle spcial different character in

Hi ,
I am dealing with EDI data and I am taking as input and creating out put as xml
but when I am opening the file in XML spy its gving some error like.
" Your file contains two (2) characters thats should not be present in the file as using the Unicode UTF-8 encoding/
The offending characters are :
ä (0xE4), ® (0xAE)
let me know how to handle.
regards
ram

Hi Ram,
the question is how do you exactly create the file and what is your type of the system (Unicode or Non-Unicode) in which you created it ?
The content of the file is Non-Unicode (ISO-8859-1):
E4 = U+00E4 : LATIN SMALL LETTER A WITH DIAERESIS
AE = U+00AE : REGISTERED SIGN
However XML expects UTF-8 by default and there the special characters are encoded differently.
Best regards,
Nils Buerckel
SAP AG

How to handle the messages.

Hi,
I am doing interactive report. In that how to handle the error meesages.
Regards
Srinu

HI
IF YOU WANT HANDLE THE ERROE MESSAGES
*& Report ZNNR_REPORT
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING <b>MESSAGE-ID ZNNR</b> LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
*********INITIALIZATION OF SELECTION SCREEN ELEMENTS.*****
INITIALIZATION.
P_WERKS = '1000'.
S_EBELN-LOW = '4500016926'.
S_EBELN-OPTION = 'EQ'.
S_EBELN-SIGN = 'I'.
APPEND S_EBELN.
CLEAR S_EBELN.
************END OF INITIALIZATION***********************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
           FROM EKKO
           INTO EKKO
           WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
    SET CURSOR FIELD 'S_EBELN-LOW'.
    <b>MESSAGE E999 WITH TEXT-005</b>.
ENDIF.
********end of screen validation*****************
START-OF-SELECTION.
*set pf-status '100'.
IF R1 EQ 'X'.
    SELECT MATNR
           WERKS
           PSTAT
           EKGRP
       FROM MARC
       INTO TABLE IT_PLANT
       WHERE WERKS = P_WERKS.
    LOOP AT IT_PLANT.
      WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
             21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
             27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
             43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
    ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
    SELECT EBELN EBELP MATNR WERKS LGORT
           FROM EKPO
           INTO TABLE IT_PONO
           WHERE EBELN IN S_EBELN.
    LOOP AT IT_PONO.
      WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
             12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
             18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
             37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
             44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
    ENDLOOP.
ENDIF.
TOP-OF-PAGE.
IF R1 EQ 'X'.
*ULINE AT /1(48).
    WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
            21 SY-VLINE , 22 'PLANT',
            27 SY-VLINE , 28 'STATUS',
            43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
    ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
    WRITE : SY-VLINE , 2 'PO NUMBER',
           12 SY-VLINE, 13 'ITEM',
           18 SY-VLINE,19 'MATERIAL NUMBER',
           37 SY-VLINE, 38 'PLANT',
           44 SY-VLINE, 45 'GRUP',
           49 SY-VLINE.
    ULINE AT /1(50).
ENDIF.
END-OF-PAGE.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.
WRITE THE CONDITION WHAT EVER YOU WANT TO CHECK AND IF THAT IS TRUE SY-SUBRC = 0 THEN NO MESS IF NE 0 THEN RAISE A ERROR MESSAGE LIKE ABOVE
REWARD IF USEFULL

How to handle transactions when two different databases are involved.

consider two tables namely Table-A and Table-B part of two different databases namely ORACLE and MYSQL.
Now the project requirement is updating the Table-A(ORACLE) and Table-B (MYSQL) as one transaction. i.e. either update both the tables or rollback both the tables.
Now my question is how could i handle this situation using JDBC(Type-4) driver.Because i think at a time only one JDBC driver can be loaded into the JVM.

NareshAnkuskani wrote:
Now my question is how could i handle this situation using JDBC(Type-4) driver.Because i think at a time only one JDBC driver can be loaded into the JVM.No, that is not true.
But anyway, you need to use distributed (XA) transactions. i believe that the latest version (5.0) of mysql actually has support for XA transactions. you need to use a to setup a distributed transaction and attach the connections for the two databases to that transaction. then it should function as you desire.

How to handle -ve sign in JDBC SP

Similar Messages

Maybe you are looking for