How to have rotated axis labels in charts without embedding fonts?
Hi all,
I am trying to have slant/rotated axis labels in flex charts to avoid clutter in cases of large number of sample points. It was fairly easy to do this using 'labelRotation' method in AxisRenderer but this involved embedding fonts [ causes my swf to increase in size by atleast a 100KB which in my case is very high ]. My question is.. Can this be done without embedding the fonts? Maybe with the use of labelRenderer? Any alternatives that would solve the purpose without increase in swf size are also most appreciated as I ve been struggling with this for quiet a while.
Thanks a ton,
Siva
Please check LabVIEW\Examples\picture\demos.llb\polar plot demo.vi
But it has no zooming and cursors.
Maybe you can modify that example and use XY plot instead of picture control. I mean for each function plot on the picture, you generate another function to replace it and generate XY data pairs.
Similar Messages
-
Rotating text without embedding fonts - how?
No doubt same or similar question was asked and most likely answered but I could not
find anything that would match...
I want to draw column headers of my ADG vertically. So, I need rotate column text 90 degree
and adjust position.
Is it true that it can be achieved with embedded font only? If it is true how can it be done for
Unicode code, which includes ranges for Japanese, Chinese, etc characters. The size of
swf is going to be huge. Several sites like this
http://www.forestandthetrees.com/2009/06/29/rotating-text-without-embedding-fonts/
claims that they have a solution for the problem without embedding fonts.
Note: I am still using Flex 3.3 SDK with no TLF. By the way, do TLF libraries work with
3.3 SDK.?
Thanks in advanceDraw your text onto a bitmap image (or take an ImageSnapshot of a Label), then rotate the image.
-
X Axis labels in Chart background elements
I want to display the X-axis labels in Chart background area something like this
Has anyone implemented this before? Please help me how to do this?Can anyone please help me on this?
-
I am needing to create a line graph with dates consisting of MM/DD/YY along the category axis. I would like to rotate the labels 45 degrees and have them stay when I update the graph. I have read about manually doing it, I even made an action to make it faster, but it still seems inefficient. Is there a setting that I could use to automatically create my labels as rotated? Thanks.
Hi Gravy Train,
I'm curious about why you are using 2 loops. You mentioned one is for monitoring and one is for DAQ....what do you mean by that? What is the overall goal of this piece of code. Also, I noticed that you are not closing the task. Since this is just a subset, I realize you could be closing it in your actual code, but just in case you're not.....it is very important that you close all tasks when you are down acquiring data.
Best Regards,
Starla T -
Programatically shifting X-axis labels in chart section of a .bqy document.
Hi all,
We would like to programatically change some properties like height, width for X-axis labels of a chart in the chart section of the .bqy (Interactive Reporting Studio) document. We don't find the existing properties fit our requirement.
So, I request all the experts in "Interactive Reporting" to help us out as early as possible!
Thanks,
Natesh.Thanks for your reply.
You're right, it shows the day data when I click on the month. Fine, but if it shows the daily data, why doesn't it show the date as well.
As I tried to explain, the data are correct, but the labels are wrong or insufficient. Why do I have only 'Jun-2010' below the bar of a day?
I investigated a little bit further and found that the behaviour changes depending on which month column out of the time dimension I choose.
If I choose 'Month (MON-YYYY)' I get this label on the month chart and on the day chart (the drilled down chart), nothing more.
But if I choose 'Month (YYYYMM)' from the same dimension in the month chart by changing the query in answers, I get an additional label in the day chart showing the day
as YYYYMMDD.
I need to influence this behaviour, but don't know how. I thought the drill down relationship comes from the Business Modell layer, but I don't see how to change things there.
Any idea?
Regards,
Knut -
Problem in displaying x-axis label in charts
hi experts,
i am using charts in my report..... the problem is that the label in the x-axis is not getting displayed.
i think it may be due to the no. of columns. i have to display records in chart for 31 days that is there should be 31 bars ...
it is displaying the bars but not the label like (01/06 , 02/06..) in x-axis...where as if i reduce the number of columns it is getting displayed....could you please help me in this..
below is the code snippet,
CALL FUNCTION 'GRAPH_2D'
EXPORTING
TITL = 'DATE vs PURITY'
VALT = 'PURITIY'
SMFONT = 'X'
WINPOS = '1'
WINSZX = '80'
WINSZY = '80'
TABLES
DATA = CHART.
thanks in advance,
syedHi,
I think you can try with WINSZX = '100' & WINSZY = '100' so that your graphic window opens up with highest cordinates.
And there is a limitation that DATA may contain at most 32 rows. Dispalying all column labels will not be possible if the value is too large.
Alternatively you can try out with function module 'GRAPH_MATRIX_2D'.
Hope this helps. -
Duplicate y-axis labels on charts for small data values -- is this a bug?
Hi,
I have several charts where the data values are small (1,2,3). The y-axis labels are duplicated for these charts. For example, if the data value was 2 the y-axis labels display as 0 1 1 1 2 2 2. I know that I can manually set the maximum y-axis value and also set the segments on the chart to eliminate the duplicate values. My issue is that I have over 100 charts in my dashboard and I have to manually set the values each month, and then in the next month when the data values are larger I have to remove the maximum y-axis value so the y-axis value is dynamically created. Is this a known bug within the software? Is there any fix for this besides what I'm already doing?
Please let me know if anyone else has seen this issue and if this is a bug, or if this has been corrected in any fix packs.
Thanks!!Hi Jim,
I have data for three months in the data range A1 to B3 as given below -
Jan - 1
Feb - 2
Mar - 3
In Cell D1 write a formula =MAX(B1:B3)+1 (This will give you value 4)
Go to Chart property -> Behavior -> Scale -> Manual (Y) Axis -> Minimum 0 and Maximum will be pointing to cell D1.
Go to Chart property -> Behavior -> Scale -> Division -> Size of Division 1 and Minor Divisions 1
This will give you Y Axis values as 0,1,2,3,4
Now change value of any month to 5. Now value in D1 would become 6 and Y-Axis would change to 0,2,4,6.
Hope this helps.
Rashmi
Edited by: RashmiG on Jan 8, 2010 4:45 PM -
How do i change axis label object type from label to text? (to allow wrapping)
In the example of a barChart, how does one change the LABEL type from "Label" to "Text"?
I am trying to allow for long labels to wrap (ie. multi-line labels), but the default object type of labels is "Label" (which are single-line only).
I have been researching this issue all day, and have enountered a similar situation for changing the Legend component labels where a method override is implemented in a custom itemRenderer.
But I have not been able to figure out how to do this for an Axis label.
Any help would be greatly appreciated!
JYes, thank you. I am aware of the AxisRenderer.... but I'm not sure how to implement it to change the label type from "Label" to "Text" to allow for wrapping.
I guess what I'm looking for is a good example.... -
Hello All,
I am using column charts in my Xcelsius Dashboard (Xcelsius 2008 - SP5). The X-axis labels are too lengthy, it is displaying vertically. The requirement is to display the names horizontally and wrap the text. I cannot use label component as workaround as the names are populated dynamically. Any suggestions are appreciated.
Thanks,
SowrabhaHi,
This is common issue for all our developers, i will suggested you some workaround please try and let me know.
1. If series values are less in horizontly then try to use bar chart and see whether it suits for you.
2. Use the range slider to display only first 4 or 3 values, so that you can get the entire text without shrinked, later on they can slide to see all values.
3. try to apply the below given logic, i haven't dont this. I thought it would be helpful for you.
Handling long Y-Axis Labels in Bar charts in less space...
Hope it helps!!!
--SumanT -
How can I rotate waveform graphs or charts on front panel?
I'd like to have my power spectrum graph displayed vertically on front panel. Any idea how to do it?
Thanks for helps.THree quick ideas come to mind.
1) Use XY graph and transpose X and Y.
2) Use Picture control version of XY chart and hack away (these are included as example under chart and graphs)
3) Graph to a "off-screen" indicator and periodicly use an invoke node to grab the image. There is an example on this web-site that will let you rotate an image and display it in a picture control.
Have fun,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
How to adjust x axis of line chart for dynamic values from universe
Dear All,
I am new to SAP Dashboard. I got one requirment that, user will pass single value to universe using prompt in Dashboard. Based on that prompt value / input parameter, universe will deliver data to plot line chart in my canvas. But, on every request i will get different count from universe. Like for request A = 30 records, request B = 56 records, request C = 2 records and so on.
Based on the count, i want to display line chart in my canvas which will auto fit the screen. (Auto adjustment of X axis e.g For A, last record on x axis should be 30, for B = 56 and for C =2). Please let me know, how can i achive this task?.
Note : i know, how to plot simple line chat with fix count.This is based on the output you get for the selection, get in touch with the functional team and get an idea about maximum no of result set will appear on various selection options. Say example if the functional guy says around 100 then go ahead and map 100 cells for the series.
Then as arijit said you can use the ignore blank cell option to eliminate the blank rows in the selection.
Note: Eliminating blank cells will always work at the end of the rows, not in the middle of the rows. -
How to show ratio format labels in chart
Hi All,
how can we display the ratio format labels in columns chart in wad, please tell steps,
thanks
krisHi Kris,
I don't think that is possible since Chart series labels in WAD can only be formatted in the following ways:-
- Label by itself
- Absolute value
- Percentage
Plz. refer http://help.sap.com/saphelp_nw70/helpdata/en/6a/61373b612a6448e10000000a11402f/content.htm
--Priya -
The context is Crystal 2008 Designer.
Has anybody found a way on a bar chart to get negative % values to appear in Red or negative % values to show like (20)?
I see that choosing the category field as "currency" allows me to pick a Red color but it always has a currency symbol like $ in front. Anyway that could be suppressed?
Thanks and regardsPlease re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551 -
How to have rotating desktop images?
In 10.2.8, I could set my preferences to use images from an iPhoto album as desktop backgrounds that changed on each login. Now that I have upgraded (10.4.3), the "Change picture" command is greyed out when I have any iPhoto album selected.
I am still able to set iPhoto images as backgrounds, but it will no longer allow them to rotate; I have to manually change them in preferences.
Is there a way around this? Thanks.Hi luneluxe,
Things have changed a little in the new version.
Now the only album that will rotate photos is the one you choose WITHIN iPhoto by selecting the Album and then hitting the Desktop icon in the iPhoto toolbar.
When System Preferences open after doing this, you will see you can now check the box to have a random image at intervals.
Lori -
Hi there,
I cannot use InfoPath. But I need functionality like InfoPath Repeating Tables. Do I have any option? Any JavaScript or anything else?
Thanks so much.Hello,
You can also use gridview to create dynamic rows.
http://www.codeproject.com/Articles/467788/Dynamically-adding-and-deleting-rows-from-ASP-NET
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help
Maybe you are looking for
-
TS1741 If I only have an iPad and Apple TV 1st gen how can I get it to work
Will I'm trying to use my new iPad as my remote for my first generation cause I keep losing it. I do not have a computer is there any other way to connect them too.
-
I also get this message; Process: QuickLookSatellite [8313] Path: /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app/Contents/XPCServices/QuickLookSatellite.xpc/Contents/MacOS/QuickLookSatellit e Id
-
Need Help! Traditional chinese characters not well in Adobe Reader on Win 7
We receive pdf fiels from our partner and it has gone well. After we upgrade our client OS to Windows 7. The traditional chinese charcters become some kinds of symbol. But it shows well in Windows XP with the same version 9 of Acrobat reader. Here is
-
How to combine a raw xml file stored in a table field withe other sql query in . xsq
I created .xsql file like this: <xsql:query> select xml_file from my_table </xsql:query> xml_file is field in my_table,it stores raw xml files. the xml file in the result is in text format, not in xml format,how to convert the file into xml format in
-
What does it mean when you are signed in as a guest on a wi fi network?
My sister is in the hospital and would like to use her ipad. The only network that lets her sign in is guest network and it doesnt let her get much of anything. What does guest network mean?