How to hide Text Variable in the Query title

Hi guys,
here again in a very easy pratical issue.
I need to insert a text variable in a report title.
The variable is updated with an exit and the text is get once the query is executed. This works fine.
My problem is that in report selection (so opening the query and between queries available for an Infoprovider) I see the tech variable name of the query. Do you know if there is a method to hide the variable or if it is possible to valorize it when the report title in the report selection is displayed?
Thanks in advance
Bye!

Hi, thanks for your answer.
Also SAP marks this as a limitation.
Bye!

Similar Messages

How to hide a variable in the query?

Hello everyone,
I don't know if my framing would be correct but i would like to explain my problem first. I have a query with a variable in the result but with defaulted values. I don't want this variable to pop up when i am running a report. I don't want the users to know that this has been defaulted or i just feel it unnecessary for them to see this variable. So is there a way to avoid it or hide it. Ex: i have a varible with Cal day and Plant as optional variables and the third is Document number which i defaulted from 500 to 599 but i don't want this to popup while running the query or refreshing the report. Just fyi this variable has been used in the columns part as a selection with one key figure and one characteristic.
Hope i am clear,
Would surely appreciate any of your comments.
Anjali

Hi Anjali,
Modify the document number variable and uncheck the "<b>Ready for Input</b>" check box. This will not display the Document number variable to the user.
Hope this helps.
Cheers,
Demetrius.

How to create Text Variables in BEx Query Designer

How can i create Text Variables in Bex Q.D.
I am able to create characteristic variables
but i can't find option to create text variables.
What's the requirement to create Text variables in Bex Q.D.
When i try to create Text variable for 0calDay.. the variable type is characteristic by Default and disabled.
How can i create text variables related to 0CalDay with which i need to work in Customer Exit.

Hi,
You have to create characteristic variable processing by Customer Exit by considering 0CalDay as a Reference Characteristic
After creation of the above variable, you restrict your KF with the above created variable.
Now you can create a Text variable for the description of your KF. This way it works...........
Regards,
Suman

How to change Global variable in the query

Hi,
I have 6 reports which is using 0PDT as a global variable and has single option as a property. Now I want to change this property and have multiple selection but I am not able to change its property.
I am able to see all the filter variables from the query property and from there I am getting edit option to change but the "single selection" option is grey/disable which is preventing me to make change in this variable. Is there any way that I delete this variable and create a local variable which has date range option.
This is affecting all my reports and all the report needs date ranges instead of single select option.
Thanks,
Shivani

Shivani,
You can change the restrictions with new variable(right click on required infoobject and choose restrict -->> choose variables -->> move existing variable from right to left and move new variable. Then you can see only one variable.
You can not delete any variable if is using in some queries.
how to restrict:
Srini<a href="http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a563fe09411d2acb90000e829fbfe/content.htm">Restricting Characteristics</a>

How to use bind variable in the query to avoid hard parsing

Hi,
I have a query which is using literals
strquery:='SELECT SUMTOTAL FROM tab1 WHERE BATCHNO = '''
      || gBNo
      || ''' AND A_ID = '''
      || g_id
      || ''' AND L_ID = '''
      || g_LId
      || ''' AND S_Code = ''C_3'' ';
execute immediate strquery;I have been asked to use a bind variable to avoid hard parsing.
How do i do it?
Edited by: user8731258 on Jul 27, 2012 5:07 AM
Edited by: user8731258 on Jul 27, 2012 5:08 AM

You dont need Dynamic SQL. Your Table and Column Name are static in that query. Just use Static SQL
SELECT SUMTOTAL
INTO lSumTotal
FROM tab1
WHERE BATCHNO = gBatchNo
   AND ATM_ID = gAtm_id
   AND LOAD_ID = gLoadId
   AND STEP_CODE = 'C_3';

How to change text variable value in bw3.5 query

Hi Friends,
I want to change the text variable value in query designer.
My requirement is Header it's showing 2008 actual but it should 2007 actual.
Siri

Dear Siri,
include it into some header and you will have
&<your text variable>& - click on the same and a drop down will come asking you to edit or remove the same and choose edit.
Hope this helps u..
Best Regards,
VVenkat..

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

Using currency conversion and text variable at the same time

Hi all,
In a 3.5 bex query, i am applying currency conversion on a key figure with a variable of 0currency.
as i know, to be able to apply currency conversion, variable of currency should not be in Free characteristics or in Filter.
it has to be selected only on the key figure.
but now, i want to use text variable for selected currency (with type replacement path). But as i know, to be able to use text variable, variable of currency has to be
in Free characteristics or in Filter.
Can you please advise, how to both use currency conversion and text variable on currency?
Thanks in advance.
Sancho

Sancho,
I'm not 100% sure about this, but I'm thinking that if you are pulling the text variable from a selection in a structure, you should not need it in the free characteristic or filter. Try creating a structure, placing the currency in it as a selection, and creating a text variable as the title for the selection that is based on the currency. This may help.
Cheers,
Rusty

Providing access to Variables in the Query Designer

Greetings experts and fellow consultants,
I have a simple question, did a search and did not come up with much of an answer. Currently, we have a system with a role for BI Power Users in order for them to create ad-hoc queries. An issue we found was that these power users were not able to view variables within the query designer:
Under the "Characteristic Restrictions" pane, the variables show up as (Display Not Allowed) under their associated InfoObjects. This is presenting an issue (understandably) and I would like to provide access for these power users to see the variables.
My question is, are there any circumstances where I would want to restrict which variables are shown to the power user? Right now, I plan to allow display access to all variables (via S_RS_COMP+S_RS_COMP1 for those informed on Security). Just trying to brainstorm on whether there might be scenerios where I would want to hide certain variables.
Many thanks to all opinions, as always!

Suresh, in my above post I knew how to enable this. I just wanted to know in regards to security whether there were any exposures. Apparently, I could not find any and the changes went through without issue. The way you enable display of variables in the Query Designer is the following:
S_RS_COMP:
RSINFOAREA '*'
RSINFOCUBE '*'
RSZCOMPTP 'VAR'
ACTVT '03'
S_RS_COMP1:
RSZCOMPTP 'VAR'
RSZCOMPID '*'
RSZOWNER '*'
ACTVT '03'
Hope this helps. Of course, adjust the field values are you see fit but the minimum requirement is that RSZCOMOPTP 'VAR' (Variables) and ACTVT '03' (Display).

How to hide Saved Searches in the header area of web ui

Hi All,
My Query Is how to hide Saved Searches in the header area of web ui.
For This is there any configuration or we have do through the code.
Thanks & Regards,
Venkat

Another approach:
Open view CRM_WORKAREAHDR/WorkAreaHeader and change the configuration. There is a button in the bar named "Attributes" (probably hidden under MORE).
Once in there in edit mode substitute the content of attribute "UI_COMPONENT_3". It should be
Window=CRM_ALLSEARCHES.CRM_ALLSEARCHES/LauncherWindow;horizontalAlignment=right;
put there a
Width=0px;
The other way using business role is fine as well.
cheers Carsten

How to hide repeated details using SQL Query?

How to hide repeated details using SQL Query?
For Ex:
------------------------+
DEPTNO| ENAME | JOB |
------|-------| --------|
10 | JAMES | MANAGER |
10 | BLAKE | CLERK |
10 | FORD | SALESMAN|
20 | SCOTT | MANAGER |
20 | ADAMS | CLERK |
20 | KING | SALESMAN|
------------------------+
How we can display the above details in the following way?
------------------------+
DEPTNO| ENAME | JOB |
------|-------| --------|
10 | JAMES | MANAGER |
| BLAKE | CLERK |
| FORD | SALESMAN|
20 | SCOTT | MANAGER |
| ADAMS | CLERK |
| KING | SALESMAN|
------------------------+
Thanks Advance

Hi,
you can use BREAK ON DEPTNO in SQL*Plus or use LAG.
SQL> ed
Wrote file afiedt.buf
1 select nullif(department_id
2                , lag(department_id) over (partition by department_id order by last_name)
3         ) dept_id
4 , last_name, job_id
5* from employees where department_id in (30,50) and rownum <=10
SQL> /
   DEPT_ID LAST_NAME                 JOB_ID
        30 Baida                     PU_CLERK
           Colmenares                PU_CLERK
           Himuro                    PU_CLERK
           Khoo                      PU_CLERK
           Raphaely                  PU_MAN
           Tobias                    PU_CLERK
        50 Fripp                     ST_MAN
           Kaufling                  ST_MAN
           Vollman                   ST_MAN
           Weiss                     ST_MAN
10 rows selected.

How to make text start at the top of a page in livecycle 9

Hi, How can I get the text in a large text field to start at the top left of the field rather than at the center of the field? In addition, may one know how to make text wrap in the form as well?
Thanks,
David

To set the Text alignment properties use "Paragraph" pallet you can make it visible by selecting Window>>Paragraph or Shift+F5
And to allow text wrapping you need to select "Allow Multiple Lines" checkbox under "Object" pallet and "Field" tab. You can make Object pallet visible by selecting Window>>Object or Shift+F7.
Good Luck,

How to specify a variable in the path prefix of an External HTTP (RFC) connection (in transaction SM59)

Hi There,
Please can someone tell me how to specify a variable in the path prefix of an External HTTP (RFC) connection in transaction SM59?
For example if my path prefix is /invoke/test/example?input=XYZ; how do I replace "XYZ" with a variable so that I can pass in any value after "=" ?
Thanks,
Brendon

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost above discussion to get quick assistance.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Want to See Selected Input Variables in the query output

Hi al
My client gives a requirment like they want to see selected variables in the query output. Like suppose if i am entering Profit center, controlling area, version, caldayas a input on the screen. Now they want to see only Profit center and version on the query result.
Please let me know if any one has this solution.
Regards,
Amit Shetye

Hi
Can you please give us user requirement and according to ure requirement so we given replies . If ure requirement please explain detail
But it is not neccessary that we can put something in free char and all. Inspite of that they wanted to select the input variable as per their requirement. They dont want to restrict them in Free char.

How to hide some functions in the menu bar of flash paper

Do anyone know how to hide some functions in the menu bar of
flash paper? As I want to show a swf file(converted from pdf) on
the website without printing function. How can I do it?
Also, if possible, can anyone know how to hide all functions
on the menu bar except the logo of flash paper?
Thank you very much, it is very urgent.

Here is an article about how to integrate flashPaper into
Director. It has most of the functions that can be executed on
flashPaper. Maybe it will help?
http://www.adobe.com/devnet/director/articles/flashpaper_in_director.html
and here is all his code
http://www.mediamacros.com/item/item-1006687373/
Note: it is for 1.01, but works with 2.0

How to hide Text Variable in the Query title

Similar Messages

Maybe you are looking for