How to identify the status of the data load

Hi All,
Here is my requiremenet,
I have a process called etl_pf2 which loads the data into staging tables. Now I have another process that does a partition exchange and moves the data from staging tables to online tables.
In one procedure, I need to verify whether any data load into the staging tables is happings. If yes then partiontion should not occur, if no then movement should happen.
Any idea on any parameter which can be used in the procedure to check the status of the data load in staging tables.
Please help me.

Thanx for reply
But i thhink that the problem is with NQSServer which crashes but not disappears from the processes list.
I tried to search obiee+USER_MEM_ARGS and nqsserver+USER_MEM_ARGS but found only this thread.
How can JVM settings help to nqsserver.exe to work properly?

Similar Messages

  • How to identify what are all the events are created in background jobs?

    Hi all,
    how to identify what are all the events are created for  background jobs. And what events gets triggered for a particular job.
    thanxs
    haritha

    Hi Haritha,
    JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
    Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
    Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
    Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
    Use
    As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
    Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
    for more information you can go thru the following thread:
    http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
    About Events:
    Events have meaning only in the background processing system. You can use events only to start background jobs.
    Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
    Types of Events:
    There are two types of events:
    1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
    2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
    For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
    You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
    for more information you can go thru the following thread:
    http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
    When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
    1. Immediate
    2. Date & Time
    3. After event.
    4. After job.
    5. At Operation mode.
    In case you want to view the job logs go to sm37.
    Also Pls check DB02 for database performance and ST03 for workload .
    Analyse u will have an idea ,
    *pls assign points,if info is useful**
    Regards
    CSM reddy
    null

  • How to identify which record(s) the user hasbeen checked

    i have a internal table in which first field is represented as check box in the output .
    like bellow
      loop at g_it_final into g_wa_final.
            write : 5 sy-tabix ,
                   20 g_wa_final-g_v_check as checkbox,
                   25 g_wa_final-TRKORR,
                   40 g_wa_final-AS4TEXT.
      endloop.
    now the user will select some records from the output checking the check box
    NOW the QUESTION is
    how to identify which record(s) the user hasbeen checked(selected) ?
    so that i can disply only the selected records in the secondary list.

    Hi,
    You will have to use the 'READ LINE' command within a loop to retrieve the data back into your program.
    You may want to use the HIDE command to ease the retrieval of the checkbox value.
    Check out the online help for both of these.
    Darren

  • How do i find out the status of the ink in the HP 5510 machine?

    Please can you advise how i find out what the status of the ink is in the "HP 5510" machine?

    Hi,
    Please use this:
    From the Printer Home screen, touch the right directional key, and then touch the Ink icon to display the estimated ink
    levels.
    Regards,
    Note: The ink icon is similar to a drp\op of water.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to rectify the errors in master data loads & transactional data loads?

    hy,
    please any one tell me
    How to rectify the errors in master data loads & transactional data loads?
    thnQ
    Ravi

    Hi,
    Please post specific questions in the forum.
    Please explain the error you are getting.
    -Vikram

  • Is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how?  Will the status of the games be the same?

    is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how?  Will the status of the games be the same?

    As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519
    If you want to copy over your progress then you will need to try backin up the iPod and restoring that backup onto the iPad - you can't just restore individual apps, it's all or nothing.

  • How to maintain the status of the Thread ?

    How to maintain the status of the Thread ?
    namanc

    I want to know whether a particular thread (java
    application) is completed successfully or not ...
    If the thread is not completed successfully then I
    want to restart the Thread.
    Actually this is the Task Scheduler Application ...
    If the particular task is not running successfully
    then I want to start the Task again ...
    namancThen it could look something like this: // loading the queue
    for each task
        add task to list of incomplete tasks
        enqueue task in work queue
    // dispatcher
    while !done()
        task = workQueue.dequeue();
        New Thread(task).start();When a task finishes, it can call a callback method on the dispatcher. The dispatcher looks at the task's status. If it finished successfully, the task gets removed from the list of incomplete tasks. Else it goes back on the work queue.
    There will be some syncing issues involved. You'll have to use wait() and notify()/notifyAll() to handle the situation where the work queue is empty, and all incomplete tasks are being worked on. And the case where the dispatcher wakes up after the notifyAll() and there's nothing to dequeue and nothing in the list of incomplete tasks.
    Clearly it needs some fine tuning, but I hope you get the idea.

  • How can i get the status of the loaded database in OCI ??

    Hi, buddy!
    Now i wanna get the status of the loaded database,example MOUNT, NOMOUNT,OPEN. Can i use the OCI interface to get it? if it like that,
    how can i do? Otherwise, is there another way to do in program??
    thanks!!

    My friend, thank you very much for your help!
    I have tryed according to you advice. The result is that i can connect database successfully only when the database is in the OPEN mode. I use the V$DATABAES table to find the open_mode and of course the result is OPEN, so it's correct.
    But when the database is in the MOUNT or NOMOUNT mode, i can't connect the database successfully.It will throw the exception "ORA-01033: ORACLE initialization or shutdown in progress".
    Could you tell me why? Special thanks!!!
    Message was edited by:
    user588906

  • How to get the status of the backgroud job?

    Hi all,
    I have a job, there are two steps. I have checked in the table TBTCP, the status is always 'P', which means:job step scheduled, even the step is finished. How can we get the status of every step? Many thanks in advance!

    try FM  BP_JOB_STATUS_GET
    but Table TBTCO(field-status) gives the status of the job i.e whether scheduled,released,active,finished,ready or terminated job.
    check  following tables
    <b>TBTCJSTEP - Background Job Step Overview
    TBTCO - Job Status Overview Table
    TBTCP - Background Job Step Overview</b>
    Message was edited by:
            Vasu G

  • How to Identify larger Infocubes where the dimension entry count is large

    Hi SDN,
    I need some help on Indexes dropping and Recreation.
    Please can any body help me on How to Identify larger Infocubes where the dimension entry count is as large as the Fact Table count.
    Need to suggest on a solution to implement the Indexes creation for optimizing the load performance of Larger Infocubes... Its urgenTT!!!!!!!
    Please help!!
    Thanks,
    MH

    Hi,
    I have ran the Report in SE38, also I have downloaded it to local Excel file.
    It is showing density, rows etc.Please can you elaborate on how to easily Identify
    the Larger cubes. As I have seen that the rows of both E and F fact table are displayed. How can I use this reports information in order to suggest for the Indexes?
    Help in this regard is much appreciated!
    MH

  • How can I change the status of the fileupload UI from disable to enable?

    Hi, experts,
    The Version of my Netweaver studio is 7.0.11.
    I create a view with fileupload UI element in WebDynpro for Java application, but the fileupload UI element is disabled so that I don't select file when I click the button in the fileupload UI element after I run the application.
    How can I change the status of the fileupload UI element from disable to enable?
    Best regards,
    tao

    Hi
    look at this thread [HI Masters , I need information for file upload program in web dynpro java|HI Masters , I need information for file upload program in web dynpro java]
    and check if u bind each file upload element to binary property in the context

  • How can we kow the status of the databse in oracle

    how can we kow the status of the databse in oracle (open or not)
    thanks

    >> select database_role from v$database
    This will give the Current role of the database i.e. PRIMARY
    ,LOGICAL STANDBY, and PHYSICAL STANDBY.
    But OP wanted the database i.e. OPEN or MOUNTED,
    Regards,
    Sabdar Syed.

  • How can I check the status of my video loading to Youtube?

    I followed all of the steps to load my video to You Tube but I don't know if it is working. I thought there was a way in iMovie to check the status of the video and the progress it makes. How do I know if my video is loading to You tube? Is there a way I can check the status. It's a big file (524 MB) so even though I didn't get an error message, how do I know if it is uploading?
    Thanks -

    Click the dial in the dashboard to open the background task window.

  • How to check the status on the server

    I have a jsp page which runs a tcl program in the background. This tcl program will generate a HTML file and the HTML
    file will be residing in the server. Is there a way in the jsp to check the status on the server so that the moment HTML file is on
    the server and capture the date/time and display in the JSP.
    Thanks

    If the JSP is on the same server, then you can just use the File class to check that the file exists and get the timestamp of the file.

  • Attachment Downloading in Mail - How do you know the status of the download

    Hi,
    I'm trying to send a keynote presentation from my iMac to my MacBook and it doesn't seem to be working. The attachment shows up in my email, I click on it, and it doesn't really do anything. Is there a way to check the status of the download, or clear all the downloads for mail? I think it's just the size of the file, because pages files work, and even very small keynote files, but not a 3 slide keynote presentation.
    Any help with this would be much appreciated.
    Brandon

    Hi Brandon
    If you want to know quite a lot: http://en.wikipedia.org/wiki/LAN
    In short a Local Area Network is your network at home. Both your computers are somehow conncted to the internet. Most people don't want to afford seperate internet lines for each computer they own, so they build a LAN.
    Many internet providers will give you a modem with more than one network port so you can plug in more than one computers. If there's only one port, most people connect a router to get more ports. If you have wireless at home, you also have a LAN.
    Now to the better options: On both copmuters: Go to system preferences > Sharing. Enable File Sharing. To learn more about it, just click on the question mark button at the lower right.
    After you did this, open a Finder window. In the sidebar there will be a new item: Shared. If you open the triangle you'll see the computer name of your other computer. This can take a few seconds to show up.
    Now you just place the files you want to share in your Public folder so the other Mac can access it.
    Regards,
    --greg

Maybe you are looking for