How to Ignore Negative Values from taking into consideration while Calculating MTD sales

Hi Guys,
I need to ignore negative Sales (Returns) from the Month to Date Sales and calculate the Average only for those values.
How can I do that.
I researched on net but could not find any useful suggestions.
Please help!
Regards
Ajoy

Hi Mark,
I have added a screen shot above explaining where I need to put the calculation.
So basically we have a sales figure either positive or negative every hour.
I need for every day only positive values and take the average. The count to calculate hours where only positive values works. But Sum doe not work.
I am using following formula to calculate count of hours where Sales Positive
Count(Sum([HOUR]) Where ([Sales]>-1))
And for Sales Sum, following:-
=Sum([Sales]) Where([Sales]>-1)
It does not work. In the result set I do not want to see [HOUR] as a column.
Please suggest something.
Regards

Similar Messages

How to get the value from textInput Component to perform calculation?

I need some help here...I'm trying to get the value of user input from the TextInput Component which is the age, height and weight to calculate the bmr and display the result in member("result").text.
How am i suppose to let the integer pass through in order for me to perform calculation? Would appreciate if anyone can help me out with this, thanks!
Below are the formula :
The Harris Benedict equation estimates BMR:
For women: (9.56 x w) + (1.85 x h) – (4.68 x a) + 655
For men: (13.75 x w) + (5 x h) – (6.76 x a) + 66

Assumed that this section is only for male ...it still show error saying script error : String expected for
on mouseDown
member("result").text = (13.75 * value(member("weightText").text)) + (5 * value(member("heightText").text)) - (6.76 * value(member("ageText").text)) + 66
end
Do i have to add in "put sprite(x).text -- where x is the number of the sprite that is the text input." ?

How to get a value from one item into another

How can i get value from one item into another item.
Ex: I have a report, in there i have check boxes, and when i have checked some rows, and press submitt, a prosses computates it into a item on another page, and a branche redirects to page 3. Then i'm going to use the value in the item into a PL/SQL script in an report to show the submittet items.
How can i do this?
Computation script, pages and all that is fixed. But i dont know which PL/SQL statement to use to get th value from the item.

Hi Fredr1k,
Use the V() function from pl/sql.
e.g. V('P3_MY_ITEM')
will return the value of that page item.
As long as the pl/sql is called from within the Apex environment.
Regards
Michael

How can I insert values from table object into a regular table

I have a table named "ITEM", an object "T_ITEM_OBJ", a table object "ITEM_TBL" and a stored procedure as below.
CREATE TABLE ITEM
ITEMID VARCHAR2(10) NOT NULL,
PRODUCTID VARCHAR2(10) NOT NULL,
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE T_ITEM_OBJ AS OBJECT
ITEMID VARCHAR2(10),
PRODUCTID VARCHAR2(10),
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE ITEM_TBL AS TABLE OF T_ITEM_OBJ;
PROCEDURE InsertItemByObj(p_item_tbl IN ITEM_TBL, p_Count OUT PLS_INTEGER);
When I pass values from my java code through JDBC to this store procedure, how can I insert values from the "p_item_tbl" table object into ITEM table?
In the stored procedure, I wrote the code as below but it doesn't work at all even I can see values if I use something like p_item_tbl(1).itemid. How can I fix the problem?
INSERT INTO ITEM
ITEMID,
PRODUCTID,
LISTPRICE,
UNITCOST,
STATUS,
SUPPLIER,
ATTR1
) SELECT ITEMID, PRODUCTID, LISTPRICE,
UNITCOST, STATUS, SUPPLIER, ATTR1
FROM TABLE( CAST(p_item_tbl AS ITEM_TBL) ) it
WHERE it.ITEMID != NULL;
COMMIT;
Also, how can I count the number of objects in the table object p_item_tbl? and how can I use whole-loop or for-loop to retrieve values from the table object?
Thanks.

Sigh. I answered this in your other How can I convert table object into table record format?.
Please do not open multiple threads. It just confuses people and makes the trreads hard to follow. Also, please remember we are not Oracle employees, we are all volunteers here. We answer questions if we can, when we can. There is no SLA so please be patient.
Thank you for your future co-operation.
Cheers, APC

How to shift Negative sign from Right to left

Hi friends,
please tell me How to shift Negative sign from Right to left for quan data type i am getting on right side but i want to display it on left exactly preceding my output number display.

hi yogesh
check this function module..
CLOI_PUT_SIGN_IN_FRONT
this will move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justifed as numbers normally are.
chck this example..
data: a1 type i value 56 ,
a2 type i value 60,
res type i.
res = a1 - a2.
data: res1(10).
res1 = res.
CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
CHANGING
VALUE = res1
write res1.
IMPORTANT
You can use this FM CLOI_PUT_SIGN_IN_FRONT.
But you need to declare the amount field as char.
Or you can code like this
data int type i.
data char(10).
int = -4.
int = int * -1.
write int to char.
concatenate '-' char into char.
reward if useful..
Message was edited by:
navjot sharma

How to get a value from JavaScript

How to get return value from Java Script and catch it in c++ code. I have tried following code, but its not working in my case.
what I want is if it returns true then call some function if it returns false then do nothing, so how to get those values in c++
ScriptData::ScriptDataType fDataType = resultData.GetType();
if (fDataType == kTrue)
 CAlert::InformationAlert("sucess");
 //call some function
 else
 CAlert::InformationAlert("Error");
 // do nothing
JavaScript Code:
 if(app.scriptArgs.isDefined("paramkeyname1"))
 var value = app.scriptArgs.get("paramkeyname1");
 alert(value);
 return true;
else
 alert ("SORRY");
 return false;

How to get java script result into JSResult i m not getting it.
I have wriiten follwing code in c++ :
 WideString scriptPath("\\InDesign\\Source1.jsx");
 IDFile scriptFile(scriptPath);
 InterfacePtr<IScriptRunner>scriptRunner(Utils<IScriptUtils>()->QueryScriptRunner(scriptFi le));
 if(scriptRunner)
 ScriptRecordData arguments;
 ScriptIDValuePair arg;
 ScriptID aID;
 ScriptData script(scriptFile);
 ScriptData resultData;
 PMString errorString;
 KeyValuePair<ScriptID,ScriptData> ScriptIDValuePair(aID,script);
 arguments.push_back(ScriptIDValuePair);
 PMString paramkeyname1;
 Utils<IScriptArgs>()->Save();
 Utils<IScriptArgs>()->Set("paramkeyname1",scriptPath);
 Utils<IScriptUtils>()->DispatchScriptRunner(scriptRunner,script,arguments,resultData,erro rString,kFalse);
 Utils<IScriptArgs>()->Restore();
 ScriptData::ScriptDataType fDataType = resultData.GetType(); // here i should get true or false which i m passing it from javascript code......not as s_boolean
 if (fDataType == kTrue)
 //CAlert::InformationAlert("sucess");
 iOrigActionComponent->DoAction(ac, actionID, mousePoint, widget);
 else
 this->PreProcess(PMString(kCstAFltAboutBoxStringKey));
Java script code:
function main()
 var scrpt_var;
 var scriptPath,scrptMsg;
 var frntDoc=app.documents[0];
 if(app.scriptArgs.isDefined("paramkeyname1"))
 var value = app.scriptArgs.get("paramkeyname1");
 alert(value);
 return true; // i want this value i should get in c++ code...How to get these values in c++
 else
 alert ("Error");
 return false; // i want this value i should get in c++ code...How to get these values in c++

How to get parameter value from report in event of value-request?

Hi everyone,
The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
many thanks!
Jack

You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
Jonathan
report zlocal_jc_sdn_f4_value_read.
parameters:
p_field(10)           type c obligatory, "field with F4
p_desc(40)            type c lower case.
at selection-screen output.
perform lock_p_desc_field.
at selection-screen on value-request for p_field.
perform f4_field.
*&      Form f4_field
form f4_field.
*" Quick demo custom pick list...
data:
    l_desc             like p_desc,
    l_dyname           like d020s-prog,
    l_dynumb           like d020s-dnum,
    ls_dynpfields      like dynpread,
    lt_dynpfields      like dynpread occurs 10.
l_dynumb = sy-dynnr.
l_dyname = sy-repid.
*" Read screen value of P_FIELD
ls_dynpfields-fieldname = 'P_FIELD'.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_READ'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 1.
check sy-subrc is initial.
*" See what user typed in P_FIELD:
read table lt_dynpfields into ls_dynpfields
    with key fieldname = 'P_FIELD'.
*" normally you would then build your own search list
*" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
*" but this is just a demo of writing back to the screen...
*" so just put the value from p_field into P_DESC plus some text...
concatenate 'This is a description for' ls_dynpfields-fieldvalue
    into l_desc separated by space.
*" Pop a variable value back into screen
clear: ls_dynpfields.
ls_dynpfields-fieldname = 'P_DESC'.
ls_dynpfields-fieldvalue = l_desc.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 0.
endform.                                                    "f4_field
*&      Form lock_p_desc_field
form lock_p_desc_field.
*" Make P_DESC into a display field
loop at screen.
    if screen-name = 'P_DESC'.
      screen-input = '0'.
      modify screen.
      exit.
    endif.
endloop.
endform.                    "lock_p_desc_field

How to get the values from repeated frame?.

Hi
how to get the values from repeated frame?. i have to disply the first 3 digits in another place in my report.
i have field empno in repeated frame and i want to disply first 3 digits in another place in the same report.
thanks

How often do you need to display it? It sounds like you might want to base a summary on that formula with a function of first or last. If it's a per page basis, it can be a page level summary. If it's at a higher level repeating frame, then you can create the summary at that level. I'd suggest taking a look at the online help for summaries using the first/last functions.
Hope that helps,
Toby

How to retrieve the values from a table if they differ in Unit of Measure

How to retrieve the values from a table if they differ in Unit of Measure?

If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
 AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
 WHEN 'K15'.
 <fs>-adqnt2 = <fs>-adqnt1.
 CLEAR <fs>-adqnt1.
 WHEN 'MT'.
 <fs>-adqnt3 = <fs>-adqnt1.
 CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to insert a value from sequence in Bussiness Components?

How to insert a value from sequence in Bussiness Components?
I would like to do it, but without a triger that would do it before insert.
I know that there is a type DBSequence in BC where you can insert a sequence name but it does not work when I type there my sequence name.
Do you now how to fix that problem?
Bart.

The newer way to do it is to make the type DBSequence and enter the name of the Sequence object in the sequence field. It must match the same name of the sequence object in the database. Next, you have to create a before insert for each row trigger on the table. Basically, something like this:
CREATE OR REPLACE TRIGGER TGB_THEME_SEQ
BEFORE INSERT ON THEME
FOR EACH ROW
DECLARE
BEGIN
-- Assign the id from the sequence if null
     IF( :new.theme_id IS NULL ) THEN
          SELECT THEME_ID_SEQ.nextval
          INTO :new.theme_id
          FROM dual;
     END IF;
END;
In the above example, THEME_ID_SEQ is the seuence object name in the database. If you have the name right but it still fails, then the user you are logging in as probably doesn't have access to the sequence in the database.
Hope this helps.
Erik

How to pass the value from Sub report to main report

I have un report(mainreport) within a subreport(subreport).
With reporting services, how to pass the value from Sub report to main report?
thanks

Hi Alebet,
With reporting services to pass values from sub report in to main report is not supported directly.
But there are some workarounds through which you can get this .
There are two ways to get this.
1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
2- Using this temporary tables data write some Scala function in the data base.
3- Now in your main report query return this scala function as a column.
4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
This will definitely work fine as i have done some report in this way.
Another way of doing is that
1- prepare another data set with the same query as in sub report in the data tab.
2- then refer this 2nd dataset in your main report .
But better way will be the top one.
Anyway please let me know if you get the solution.
Thanks
Mahasweta

Passing field value from appoinment into task

Hi,
I need to pass the field values from appointment into the task. I was able to pass values from one record type to another but in this case as both appointment and task belong to the same record type namely activity and they are having the same foreign key namely ActivityId.
So any one please tell me , is it possible to pass values from appointment in to the task or not ?
If so how?
Thanks,
Kirubahar.
Edited by: Kiruba on Mar 4, 2011 6:45 AM

Write a workflow and select the field you want to copy the value into in the Field Name and the value you want to copy in value field, you don't need to use joinfieldValue at all.
cheers
Alex

How to avoid duplicates values from alvgird see below code

how to avoid duplicates values from alvgird see below code
in below query docno no is repeated again and again
how i can avoid duplication in this query.
select * into corresponding fields of table itab
 from J_1IEXCHDR
 inner join J_1IEXCDTL
 on J_1IEXCDTLlifnr = J_1IEXCHDRlifnr
 where J_1IEXCHDr~status = 'P'.

Hi Laxman,
after that select statement
select * into corresponding fields of table itab
from J_1IEXCHDR
inner join J_1IEXCDTL
on J_1IEXCDTLlifnr = J_1IEXCHDRlifnr
where J_1IEXCHDr~status = 'P'.
if sy-subrc = 0.
delete adjucent duplicates from itab comparing <field name of itab internal table>
endif.
this will delete your duplicate entries.once you done with this call the alv FM.
 call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'IT_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
 i_grid_title = 'Purchase Order Details'
I_GRID_SETTINGS = I_GRID_SETTINGS
 is_layout = wa_layout
 it_fieldcat = it_fieldcat
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
 it_sort = it_sort
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
 it_events = it_event
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
 tables
 t_outtab = ITAB
exceptions
 program_error = 1
 others = 2
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Thanks
Vikranth Khimavath

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to Ignore Negative Values from taking into consideration while Calculating MTD sales

Similar Messages

Maybe you are looking for